C. 3. Classement, . Mécanique, and . Bois, Rejet Volume Meilleure machine Moins bonne machine (Prix en k) (Perte) (Perte), ) Sylva (7) (X+pdf) (2) (X+pdf) & E-Scan (1) (X) & E-Scan, pp.0-4

J. Alteyrac, A. Cloutier, and S. Y. Zhang, Characterization of juvenile wood to mature wood transition age in black spruce (Picea mariana (Mill.) BSP) at different stand densities and sampling heights. Wood science and technology, pp.124-138, 2006.

V. Bano, F. Arriaga, A. Soilan, and M. Guaita, Prediction of bending load capacity of timber beams using a finite element method simulation of knots and grain deviation, Biosystems Engineering, vol.109, issue.4, pp.241-249, 2011.
DOI : 10.1016/j.biosystemseng.2011.05.008

R. Bergman, C. Cai, . Carll, M. Ca-clausen, . Dietenberger et al., Wood handbook: Wood as an engineering material, 2010.

T. Biechele, Y. H. Chui, and M. Gong, Comparison of NDE techniques for assessing mechanical properties of unjointed and finger-jointed lumber, Holzforschung, vol.23, issue.3, 2011.
DOI : 10.1021/es00178a012

J. Bodig and B. Jayne, Mechanics of wood and wood composites, 1982.

M. Brannstrom, J. Manninen, and J. Oja, Predicting the strength of sawn wood by tracheid laser scattering, Bioresources, vol.3, issue.2, pp.437-451, 2008.

F. Brüchert, G. Becker, and T. Speck, The mechanics of Norway spruce [Picea abies (L.) Karst]: mechanical properties of standing trees from different thinning regimes, Forest Ecology and Management, vol.135, issue.1-3, pp.45-62, 2000.
DOI : 10.1016/S0378-1127(00)00297-8

B. Bs, Visual strength grading of softwood. Specification, 2007.

C. En, 14081-4 Strength graded structural timber with rectangular cross section - Part 4: Machine grading Grading machine settings for machine controlled systems, 2009.

C. En, 14081-3 Strength graded structural timber with rectangular cross section -Part 3: machine grading; additional requirements for factory production control, 2012.

C. En, 14081-2 Strength graded structural timber with rectangular cross section Part 2: Machine grading; additional requirements for initial type testing, 2013.

A. Clark and J. Saucier, Influence of initial planting density, geographic location, and species on juvenile wood formation in southern pine. Forest products journal, pp.42-48, 1989.

T. Deresse, R. K. Shepard, and S. M. Shaler, Microfibril angle variation in red pine (Pinus resinosa Ait.) and its relation to the strength and stiffness of early juvenile wood, Forest Products Journal, vol.53, issue.78, p.34, 2003.

L. Garcia-esteban, F. G. Ferna?ndez, and P. De-palacios, MOE prediction in Abies pinsapo Boiss. timber: Application of an artificial neural network using non-destructive testing, Computers & Structures, vol.87, issue.21-22, pp.1360-1365, 2009.
DOI : 10.1016/j.compstruc.2009.08.010

M. Fonselius, C. Lindgren, and O. Makkonen, Lujuuslajittelu nostaajalostusarvoa. Suomalaisen sahatavaran lujuus. Rakentavaa Tietoa, 1997.

D. Haines, C. Leban, and . Herbe, Determination of Young's modulus for spruce, fir and isotropic materials by the resonance flexure method with comparisons to static flexure and other dynamic methods, Wood Science and Technology, vol.30, issue.4, pp.253-263, 1996.
DOI : 10.1007/BF00229348

S. Halley-des-fontaines, Grenelle de lenvironnement et Assises de la forêt. Plan dactions pour la forêt, Revue Forestière Française, vol.60, issue.1, pp.7-12, 2008.

A. Hanhijarvi, A. Ranta-maunus, and G. Turk, Potential of strength grading of timber with combined measurement techniques. Combigrade-project VTT Publications 568, 2008.

P. Hoffmeyer, Failure of wood as influenced by moisture and duration of load, 1990.

A. Jehl, L. Bléron, F. Meriaudeau, and R. Collet, Contribution of slope of grain information in lumber strength grading, 17th International Nondestructive Testing and evaluation of wood symposium, 2011.

C. Johansson, R. Brundin, and . Gruber, Stress grading of Swedish and German timber. A comparison of machine stress grading and three visual grading systems, Swedish National Testing and Research Institute, 1992.

E. David, D. W. Kretschmann, and . Green, Mechanical grading of oak timbers, Journal of materials in civil engineering, vol.11, issue.2, pp.91-97, 1999.

J. Lanvin, N. Nasri, D. Chambellan, and G. Pascal, Classement des bois de structure au moyen d'un densim??tre ?? rayons X, Le Journal de Physique IV, vol.08, issue.PR5, pp.5-561, 1998.
DOI : 10.1051/jp4:1998572

J. Lanvin, D. Reuling, Y. Costrel, and J. Ducerf, Evaluation of the French oak for structural use, COST E53 Quality Control for Wood and Wood Products, 2007.

J. Lasserre, E. G. Mason, M. S. Watt, and J. R. Moore, Influence of initial planting spacing and genotype on microfibril angle, wood density, fibre properties and modulus of elasticity in Pinus radiata D. Don corewood, Forest Ecology and Management, vol.258, issue.9, pp.1924-1931, 2009.
DOI : 10.1016/j.foreco.2009.07.028

J. Leban and D. W. Haines, The modulus of elasticity of hybrid larch predicted by density, rings per centimeter, and age. Wood and fiber science, pp.394-402, 1999.

C. Libermann, Etude de la faisabilité du classement non destructif des feuillus pour des emplois en structure, 2013.

S. D. Mansfield, L. Iliadis, and S. Avramidis, Neural network prediction of bending strength and stiffness in western hemlock

R. H. Mcalister and H. R. Powers, Physical and mechanical properties of half-sib families of rust-resistant loblolly and slash pine. Forest products journal, pp.11-1215, 1992.

J. Moore, A. Achim, A. Lyon, S. Mochan, and B. Gardiner, Effects of early re-spacing on the physical and mechanical properties of Sitka spruce structural timber, Forest Ecology and Management, vol.258, issue.7, pp.1174-1180, 2009.
DOI : 10.1016/j.foreco.2009.06.009

J. Oh, K. Shim, K. Kim, and J. Lee, Quantification of knots in dimension lumber using a single-pass X-ray radiation, Journal of Wood Science, vol.64, issue.323, pp.264-272, 2009.
DOI : 10.1007/s00107-006-0105-0

A. Olsson, J. Oscarsson, M. Johansson, and B. Källsner, Prediction of timber bending strength on basis of bending stiffness and material homogeneity assessed from dynamic excitation, Wood Science and Technology, vol.43, issue.4, pp.667-683, 2011.
DOI : 10.1007/s00226-008-0221-6

A. Olsson, J. Oscarsson, E. Serrano, B. Kallsner, M. Johansson et al., Bestimmung der Biegefestigkeit von Schnittholz und der Variation der Biegesteifigkeit in Brettl??ngsrichtung in Abh??ngigkeit des lokalen Faserverlaufs, European Journal of Wood and Wood Products, vol.51, issue.1, pp.71319-333, 2013.
DOI : 10.1007/s00226-011-0427-x

A. Panshin and C. De-zeeuw, Text book of Wood Technology, 1980.

Y. Park, A. Koubaa, S. Brais, and M. J. Mazerolle, Effects of cambial age and stem height on wood density and growth of jack pine grown in boreal stands, Wood and Fiber Science, vol.41, issue.4, pp.346-358, 2009.

R. G. Pearson and B. E. Ross, Growth rate and bending properties of selected loblolly pines, Wood and fiber science, vol.16, issue.1, pp.37-47, 1984.

J. C. Piter, R. L. Zerbino, and H. J. Blass, Machine strength grading of Argentinean Eucalyptus grandis. Holz als Roh-und Werkstoff, pp.9-15, 2004.

B. Rajeshwar, D. A. Bender, D. E. Bray, and K. A. Mcdonald, AN ULTRASONIC TECHNIQUE FOR PREDICTING TENSILE STRENGTH OF SOUTHERN PINE LUMBER, Transactions of the ASAE, vol.40, issue.4, pp.1153-1159, 1997.
DOI : 10.13031/2013.21333

H. Riberholt and P. Madsen, Strength of timber structures, measured variation of the cross sectional strength of structural lumber, 1979.

H. Riberholt and R. Crocetti, Bending strength and stiffness of split glulam beams, 2009.

G. Roblot, L. Bleron, F. Mothe, and R. Collet, Index of efficiency for strength-grading machines for solid wood, European Journal of Environmental and Civil Engineering, vol.65, issue.4, pp.263-269, 2013.
DOI : 10.1051/forest:2008071

URL : https://hal.archives-ouvertes.fr/hal-00879742

G. Roblot, L. Bléron, F. Mériaudeau, and R. Marchal, Automatic computation of the knot area ratio for machine strength grading of Douglas-fir and Spruce timber, European Journal of Environmental and Civil Engineering, vol.14, issue.10, pp.1317-1332, 2010.
DOI : 10.1051/forest:2008071

G. Roblot, D. Coudegnat, L. Bleron, and R. Collet, Evaluation of the visual stress grading standard on French Spruce (Picea excelsa) and BIBLIOGRAPHIE Douglas-fir (Pseudotsuga menziesii) sawn timber, Annals of forest science, issue.8, p.65, 2008.

A. Rohanovà, R. Lagana, and M. Babiak, Comparison of nondestructive methods of quality estimation of the construction spruce wood grown in Slovakia. 17th international nondestructive testing and evaluation of wood symposium , Hungary, 2011.

J. L. Sandoz, Grading of construction timeber by ultrasound, Wood Science and Technology, vol.18, issue.11, pp.95-108, 1989.
DOI : 10.1080/14786442208633943

A. Schniewind and D. Lyon, Tensile strength of redwood dimension lumber II. Prediction of strength values. Forest products journal, pp.45-55, 1971.

F. John, . Bendtsen, B. Senft, and . Alan, Measuring microfibrillar angles using light microscopy, Wood and Fiber science, vol.17, issue.4, pp.564-567, 1985.

S. Simonaho and J. Palviainen, Determination of wood grain direction from laser light scattering pattern, Optics and Lasers in Engineering, vol.41, issue.1, pp.95-103, 2004.
DOI : 10.1016/S0143-8166(02)00144-6

S. Skatter and B. Kucera, The cause of the prevalent directions of the spiral grain patterns in conifers. Trees-structure and function, pp.265-273, 1998.

H. Säll, Spiral grain in Norway spruce, 2002.

M. B. Szymanski and C. G. Tauer, Loblolly pine provenance variation in age of transition from juvenile to mature wood specific gravity. Forest science, pp.160-174, 1991.

T. Tredwell, Visual Stress Grading of Timber, Explanation and practical interpretation of the visual grading elements of BS 4978:1973. Timber grade for structural uses. Timber Research and Development Association, 1973.

M. Trouy-triboulot and P. Triboulot, Matériau bois: Structure et caractéristiques, 2001.

A. Usenius and A. Heikkilä, WoodCIM model system for optimization activities throughout supply chain, Conference proceedings on Modelling the Wood Chain Forestry Wood Industry Wood Products Markets, pp.173-183, 2007.

J. Van-de-kuilen, Bending strength and stress wave grading of tropical hardwoods . COST E24 Reliability analysis of timber structures, 2002.

J. Viguier, J. Bocquet, J. Dopeux, and L. Bléron, Frédéric Dubois, and Stéphane Aubert. Strength Grading of Split Glulam Beams, Proceedings of International Network on Timber Engineering Research (INTER), 2014.

J. Viguier, R. Collet, J. Bocquet, L. Bleron, and J. Lanvin, Interest of forest data for timber grading, Forest Products Society International Convention, 2014.

J. Viguier, A. Jehl, R. Collet, L. Bleron, and F. Meriaudeau, Improving strength grading of timber by grain angle measurement and mechanical modeling, Wood Material Science & Engineering, vol.50, issue.1, pp.145-156, 2015.
DOI : 10.1016/S0143-8166(02)00144-6

H. H. Wang, J. G. Drummond, S. M. Reath, K. Hunt, and P. A. Watson, An improved fibril angle measurement method for wood fibres, Wood Science and Technology, vol.34, issue.6, pp.493-503, 2001.
DOI : 10.1007/s002260000068

S. Wang, J. Chen, M. Tsai, C. Lin, and T. Yang, Grading of softwood lumber using non-destructive techniques, Journal of Materials Processing Technology, vol.208, issue.1-3, pp.1-3149, 2008.
DOI : 10.1016/j.jmatprotec.2007.12.105

B. Zobel and J. Talbert, Applied forest tree improvement, 1984.

B. Zobel, C. Webb, and F. Henson, Core or juvenile wood of loblolly and slash pine trees. Technical Association of the Pulp and Paper Industry, 1959.

. Comparaison-de-la-densitémoore, du module d'élasticité et de rupture en flexion entre des éprouvettes issues de bois juvénile (JW) et de bois mature (MW), p.34, 2009.

. Moore, Evolution du module d'élasticité et de la résistance en fonction de la densité de peuplement des sites de récolte, p.37, 2009.

. Lasserre, Les cercles pleins représentent des arbres issus d'une placette ou la densité est de 833 arbres par hectare, les vides à 2500 arbres par hectare, Evolution, p.37, 2009.

]. La-figure, A, B et C sont respectivement les plans transversal, radial et tangentiel La figure (b) définit quant à elle les deux angles mesurables par cette méthode : ? l'orientation de la pente de fil et ? l'angle de plongée. Le plan où est projeté le faisceau de laser est le plan x-y dans la figure (b) et correspond le plus souvent au plan B de la figure (a) [56, p.67

C. Du-classement-machine-de-la-combinaison and C. , Rejet pour différentes machines pour l'épicéa (en noir et gris) et le douglas (en bleus), p.149

C. Du-classement-machine-de-la-combinaison and C. , Rejet pour différentes machines pour l'épicéa. Stratégie du réglage machine basée sur l'optimisation de la valorisation financière, p.150

C. Du-classement-machine-de-la-combinaison and C. , Rejet pour différentes machines pour le douglas Stratégie du réglage machine basée sur l'optimisation de la valorisation de la qualité mécanique des sciages du lot, p.152

C. Du-classement-machine-de-la-combinaison and C. , Rejet pour différentes machines pour le douglas. Stratégie du réglage machine basée sur l'optimisation de la valorisation financière, p.152

. Exemple-de-matrice-d-'effectif-de-la, En vert sont représentés les sciages bien classés (sur la diagonale), en rouge les sciages sur-classés (sous la diagonale) et en bleu ceux sous-classés, p.50

. Piter, Coefficient de détermination entre module de rupture estimé à l'aide de plusieurs méthodes et le module de rupture issu d'essais destructifs, p.70, 2004.

. Jehl, Coefficients de détermination r 2 pour différents jeux de paramètres sur un lot d'épicéa, p.74, 2011.