T. Adcock, M. P. Wolcott, and S. M. Peyer, Urea formaldehyde / diphenylmethane diisocyanate copolymer adhesives: possible use as an adhesive system for straw based particleboard, Proceedings of the third European panel products symposium, pp.67-76, 1999.

A. Ballerini, A. Despres, and A. Pizzi, Non-toxic, zero emission tannin-glyoxal adhesives for wood panels, Holz als Roh- und Werkstoff, vol.59, issue.4, pp.477-478, 2005.
DOI : 10.1007/s00107-005-0048-x

V. Bartagnon, EcoBonding -Rapports de recherché et Presentation of V. Bartagnon, Clariant France, Final meeting at the HSB on, 2006.

J. C. Berg, . Wettability, . J. Ed, and . Berg, Marcel Dekker, New Ed, pp.75-148, 1993.

L. Bettelheim and J. Et-cedwall, Sven Kem Tidskr, p.208, 1978.

A. J. Bolton, J. Dinwoodie, and D. Davies, The validity of the use of SEM/EDAX as a tool for the detection of UF resin penetration into wood cell walls in particleboard, Wood Science and Technology, vol.58, issue.564, pp.234-356, 1988.
DOI : 10.1007/BF00353324

D. Brady and F. Kamke, Effects of hot-pressing parameters on resin penetration, For Prod J, vol.38, issue.1112, pp.63-68, 1988.

K. Chapman, Optimizing blowline resin blending in MDF manufacture, Presentation at Foreintek Inc, 2002.

C. Cremonini, A. Et, and . Pizzi, Improved waterproofing of UF plywood adhesives by melamine salts as glue-mix hardeners, Holzforschung Holzverwertung, vol.49, issue.1, pp.11-15, 1997.

H. Deppe, K. Ernst, and . Holz, Isocyanates as adhesives for particle board, Holz als Roh- und Werkstoff, vol.2, issue.5, p.45, 1972.
DOI : 10.1007/BF02615003

H. Deppe, Technische Fortschritte bei der Isocyanatverleimung von Holzspanplatten, Holz als Roh-und Werkstoff, pp.295-302, 1977.

A. Despres and A. Pizzi, Colloidal aggregation of aminoplastic polycondensation resins: Urea???formaldehyde versus melamine???formaldehyde and melamine???urea???formaldehyde resins, Journal of Applied Polymer Science, vol.90, issue.2, pp.1406-1412, 2006.
DOI : 10.1002/app.23230

A. Despres, A. Pizzi, and L. Delmotte, 13C NMR investigation of the reaction in water of UF resins with blocked emulsifiable isocyanates, Journal of Applied Polymer Science, vol.52, issue.2, pp.589-596, 2006.
DOI : 10.1002/app.22498

URL : https://hal.archives-ouvertes.fr/hal-00187139

A. Despres, Mise au point de nouvelles resines aminoplastes ecologiques à base de dimethoxyethanal et sans formaldehyde pour application en tant que colles pour panneaux de particules, Thèse de Doctorat, 2006.
URL : https://hal.archives-ouvertes.fr/tel-01754286

E. Drewes and D. G. Roux, Condensed tannins. 15. Interrelationships of flavonoid components in wattle-bark extract, Biochemical Journal, vol.87, issue.1, pp.167-172, 1963.
DOI : 10.1042/bj0870167

M. Dunky, Urea-formaldehyde Glue Resins, Polymer Materials Encyclopedia, vol.11, 1996.

M. Dunky, A. Pizzi, and M. V. Leemput, Wood adhesion and Glued Products, COST Action 13. 1ère édition, 2002.

R. O. Ebewele, G. E. Myers, B. H. River, and J. A. Koutsky, Polyamine-modified ureaformaldehyde resins. II. Resistance to stress induced by moisture cycling of solid wood joints and particleboard, J. Appl. Polym. Sci, issue.10, pp.431483-1490, 1991.

R. O. Ebewele and B. H. River, Polyamine-modified urea???formaldehyde-bonded wood joints. III. Fracture toughness and cyclic stress and hydrolysis resistance, Journal of Applied Polymer Science, vol.49, issue.2, pp.229-245, 1993.
DOI : 10.1002/app.1993.070490205

R. O. Ebewele and B. H. River, Behavior of amine-modified urea???formaldehyde-bonded wood joints at low formaldehyde/urea molar ratios, Journal of Applied Polymer Science, vol.52, issue.5, pp.689-700, 1994.
DOI : 10.1002/app.1994.070520510

R. O. Ebewele, G. E. Et, and . Myers, Polyamine-modified urea-formaldehyde resins. I. Synthesis, structure, and properties, Journal of Applied Polymer Science, vol.42, issue.11, pp.42-2997, 1991.
DOI : 10.1002/app.1991.070421118

R. Ede, A. Thumm, B. Coombridge, and G. Brookes, Visualization and quantification of wax on MDF panels: a comparison of emulsion and molten waxes, Proceedings of the 16thParticleboard/Composite Materials Symposium, pp.143-149, 1998.

G. Elbez, Et??de de la Mouillabilit?? du Bois, Holzforschung, vol.6, issue.6, pp.82-92, 1978.
DOI : 10.1515/hfsg.1978.32.3.82

G. Elbez, Wood based composite products, CSIR conference centre, pp.22-26, 1985.

K. Ernst, Erfahrungen mit Isocyanaten in der Spanplattenindustrie, Holz als Roh-und Werk-stoff, pp.423-427, 1985.

E. E. Ferg, A. Pizzi, and D. C. Levendis, Correlation of particleboard strength and formaldehye emission with urea step additions and C 13 NMR of UF resins, Holzforschung und Holzverwertung (Austria) v, vol.45, issue.5, pp.88-92, 1993.

W. C. Floyd and . Floyd, Non-Formaldehyde Thermosetting Technology, Inda Tec meeting, 1997.

S. Garnier and A. Et-pizzi, Dry I.B. forescasting of commercial tannin adhesives-bonded particleboard by TMA bending, Holz als Roh- und Werkstoff, vol.60, issue.5, p.372, 2002.
DOI : 10.1007/s00107-001-0253-1

R. J. Good, Theory of ???Cohesive??? vs ???Adhesive??? Separation in an Adhering System, The Journal of Adhesion, vol.15, issue.2, pp.133-154, 1972.
DOI : 10.1021/cen-v042n044.p082

O. Graf, Holz als Roh ? und Werkstoff, pp.13-17, 1937.

W. Grigsby and A. Thumm, Interaction of Wax and UF Resin in MDF: Quantification of Wax and Resin Distribution by Confocal Microscopy, Proceedings 6th Pacific Rim Biobased Composites Symposium, 2002.

W. Grigsby, A. G. Mcdonald, A. Thumm, and C. Loxton, Zur Bestimmung der Bedeckung von MDF Fasern mit Harnstoff-Formaldehyd-Harzen durch R???ntgenphotoelektronenspektroskopie, Holz als Roh- und Werkstoff, vol.19, issue.5, pp.358-364, 2004.
DOI : 10.1007/s00107-004-0498-6

W. J. Grigsby, A. Thumm, and P. Burrell, Towards an Understanding of Fiber-Adhesive Interactions in MDF Manufacture: Mill-Scale Trial, Adesives 2005 Con-ference, 2005.

G. Habenicht, Kleben Grundlagen Technologie, Anwendungen, 1986.

K. W. Haider, J. A. Wittig, J. A. Dettore, J. A. Dodge, and J. W. Rosthauer, On the trail to iso-cyante/phenolic hybrid wood binders : Model compound studies, Proc. No. 7252, pp.376-378, 2000.

B. Y. Hao and Z. T. Liu, The study on the curing process of urea formaldehyde and isocynate mixture adhesive by DSC, pp.2-6, 1993.

C. Y. Hse, Surface Tension of Phenol-Formaldehyde Wood Adhesives, Holzforschung, vol.9, issue.2, pp.82-85, 1972.
DOI : 10.1021/ja01847a005

S. Jahromi, V. Litvinov, and E. Geladé, Physical gelation of melamine formaldehyde resin solutions. II. A combined light-scattering and low-resolution relaxation proton NMR study, Journal of Polymer Science Part B: Polymer Physics, vol.42, issue.23, pp.3307-3315, 1999.
DOI : 10.1103/PhysRevA.42.2161

S. Jahromi, Storage stability of melamine-formaldehyde resin solutions, 1. The mechanism of instability, Macromolecular Chemistry and Physics, vol.200, issue.10, pp.223-232, 1999.
DOI : 10.1002/(SICI)1521-3935(19991001)200:10<2230::AID-MACP2230>3.0.CO;2-U

S. Jahromi, The storage stability of melamine formaldehyde resin solutions: III. Storage at elevated temperatures, Polymer, vol.40, issue.18, pp.5103-5111, 1999.
DOI : 10.1016/S0032-3861(98)00724-1

J. Lukkaroinen and M. Et-dunky, European Market for Adhesives for Panel Board Products: Actual State and Challenges for the Future, Conférence sur les adhésifs du bois 2005 ? USA, 2005.

F. Kamke, C. Lenth, and H. Saunders, Measurement of resin and wax distribution on woodflakes, For Prod J, vol.46, issue.6, pp.63-68, 1996.

F. Kamke, K. Scott, and J. Ra, Detection of urea formaldehyde resin in MDF fiber, Proceedings of Wood Adhesives, 2000.

F. Kamke and K. Scott, Measurement of UF resin distribution in MDF fiber, Proceedings of 4th European Panel Products Symposium, pp.114-124, 2000.

A. J. Kinloch, Adhesion and adhesives: Science and technology, 1987.
DOI : 10.1007/978-94-015-7764-9

Z. Koran and R. Vasishth, Scanning electron microscopy of plywood glue lines, Wood Fib Sci, vol.3, issue.4, pp.202-209, 1972.

W. Kuch, Holz als Roh ? und Werkstoff, pp.157-161, 1943.

E. Kulvik, Adhesives Age, pp.19-21, 1976.

E. Kulvik, Adhesives Age, pp.33-34, 1977.

L. ?. Lee, Fundamentals of Adhesion, 1991.
DOI : 10.1007/978-1-4899-2073-7

W. F. Lehman, Forest Products Journal, pp.19-26, 1974.

D. Levendis, A. Pizzi, and E. Ferg, The Correlation of Strength and Formaldehyde Emission with the Crystalline/Amorphous Structure of UF Resins, Holzforschung, vol.33, issue.9, pp.260-267, 1992.
DOI : 10.1080/00218468508081165

C. Loxton, A. Thumm, W. J. Grigsby, T. A. Adams, and M. E. Richard, Resin Distribution in medium density fiber board. Quantification of UF Resin Distribution on blow-line and dry-blended MDF fiber and panels, Wood and Fiber Science, vol.35, issue.3, pp.370-380, 2003.

X. Lu and A. Et-pizzi, Einflu\ der Aush??rtebedingungen auf das Verhalten von Holzverbindungen mit hitzeh??rtenden Klebern, Holz als Roh- und Werkstoff, vol.51, issue.4, pp.393-401, 1998.
DOI : 10.1515/hfsg.1997.51.5.459

J. Lukkaroinen and M. Et-dunky, European Market for Adhesives for Panel Board Products: Actual State and Challenges for the Future, Conference on Wood adhesives 2005 ? USA, 2005.

A. Marra, Technology of wood bonding; principles in pratice, 1992.

R. Marutzky, Wood Adhesives, Chemistry and Technology, vol.2, 1989.

A. Merlin and A. Et-pizzi, An ESR study of the silica-induced autocondensation of polyflavonoied tannins, J. appl. polym. sci, vol.59, pp.6-945, 1996.

J. Mijatovic, W. H. Binder, F. Kubel, and W. Kantner, Studies on the stability of MF resin solutions: investigations on network formation, Macromolecular Symposia, vol.181, issue.1, pp.373-379, 2002.
DOI : 10.1002/1521-3900(200205)181:1<373::AID-MASY373>3.0.CO;2-J

L. Murmanis, G. Myers, and J. Yougquist, Fluorescence microscopy of hardboard, Wood Fiber Sci, vol.18, issue.2, pp.212-219, 1986.

L. Murmanis, G. Myers, and J. Youngquist, Electron microscopy study of hardboards, pp.369-375, 1986.

N. En, Panneaux de particules et panneaux de fibres ? Détermination du gonflement en épaisseur après immersion dans l'eau, 1993.

N. En, Panneaux de particules et panneaux de fibres ? Détermination de la résistance à la traction perpendiculaire aux, 1993.

N. En, Structures en bois ? Panneaux à base de bois ? Méthodes d'essai pour la détermination des propriétés mécaniques pour des besoins structurels, 2005.

F. Pichelin, C. Kamoun, and A. Pizzi, Hexamine hardener behaviour: effects on wood glueing, tannin and other wood adhesives. Holz als Roh-und Werkstoff v, pp.305-317, 1999.

F. Pichelin, M. Nakatani, A. Pizzi, S. Wieland, A. Despres et al., Structural beams from thick wood panels bonded industrially with formaldehyde-free tannin adhesives. Forest products journal, pp.5-31, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00187312

A. Pizzi, Wood Adhesives Chemistry and Technology, pp.60-62, 1983.

A. Pizzi, A molecular mechanics approach to the adhesion of urea-formaldehyde resins to cellulose. Part 2. Amorphous vs. crystalline Cellulose I, Journal of Adhesion Science and Technology, vol.24, issue.1, pp.589-595, 1990.
DOI : 10.1080/00222338708078143

A. Pizzi, UF resins adhesion to wood ? A quantification method for adhesive formulators, Holzforschung Holzverwertung, vol.43, issue.3, pp.63-67, 1991.

A. Pizzi, T. Et, and . Walton, Non-emulsifiable, water-based diisocyanate adhesives for exterior plywood, Holzforschung, issue.6, pp.46-541, 1992.

A. Pizzi, A brief, non-mathematical review of adhesion theories as regards their applicability to wood, Holzforschung Holzverwertung, vol.44, issue.1, pp.6-11, 1992.

A. Pizzi, J. Valenzuela, and C. Westermeyer, Non-Emulsifiable, Water-Based, Mixed Diisocyanate Adhesive Systems for Exterior Plywood. Part II. Theory Application and Industrial Results, Holzforschung, vol.1088, issue.1, pp.68-71, 1993.
DOI : 10.1007/BF02612533

A. Pizzi, Advanced Wood Adhesives technology, chap. 4: Phenolic resin wood adhesives, 1994.

A. Pizzi, Advanced Wood Adhesives technology, chap. 5: Tannin based wood adhesives, 1994.

A. Pizzi, L. Lipschitz, and J. Valenzuela, Theory and Practice of the Preparation of Low Formaldehyde Emission UF Adhesives, Holzforschung, vol.43, issue.3, pp.254-261, 1994.
DOI : 10.1080/00218468608071217

A. Pizzi, N. Meikleham, B. Dombo, and . W. Roll, Tanninkleber f??r Spanplatten, hergestellt durch Autokondensation und ohne Emission von Schadstoffen, Holz als Roh- und Werkstoff, vol.51, issue.2, pp.201-204, 1995.
DOI : 10.1007/BF02716424

A. Pizzi, M. George, P. Zanetti, and . Meausoone, Rheometry of aging of colloidal melamine-urea-formaldehyde polycondensates, Journal of Applied Polymer Science, vol.91, issue.3, pp.655-65, 2005.
DOI : 10.1002/app.21492

. E. Pressrelease, . Asian, . Nov, and . Dec, HeveaBoard Pioneers PMDI E0 Particleboard Production in S, 2002.

M. Prestifilippo, .. A. Pizzi, H. Norback, and P. Lavisci, Geringe Zus??tze von Melaminsalzen zur Verbesserung der Wasserresistenz von UF-Harzen, Holz als Roh- und Werkstoff, vol.17, issue.6, pp.393-398, 1996.
DOI : 10.1002/pol.1979.170171012

A. Rapp, H. Bestgen, W. Adam, and R. Peek, Electron Energy Loss Spectroscopy (EELS) for Quantification of Cell-Wall Penetration of a Melamine Resin, Holzforschung, vol.27, issue.7, pp.111-117, 1999.
DOI : 10.1002/app.1993.070481216

G. Rackwitz, Holz als Roh ? und Werkstoff, pp.200-209, 1963.

H. Roll, Distribution of MDI on Particles and in Particleboard, Proc. 1st European Panel Products Symposium, pp.250-257, 1997.

F. Rost, Fluorescence microscopy. Volumes 1 and 2, 1992.

D. G. Roux and E. Paulus, spp, Biochemical Journal, vol.78, issue.4, pp.785-789, 1961.
DOI : 10.1042/bj0780785

H. M. Saayman and D. G. Roux, The origins of tannins and flavonoids in black-wattle barks and heartwoods, and their associated ???non-tannin??? components, Biochemical Journal, vol.97, issue.3, pp.794-801, 1965.
DOI : 10.1042/bj0970794

H. Saunders and F. Kamke, Quantifying emulsified wax distribution on wood flakes, For Prod J, vol.46, issue.3, pp.56-62, 1996.

A. Schouteeten and F. Vuillemin, 2-Dimethoxyethanal: A new bond between your molecules " . Speciality Chemicals, 1994.

J. Schultz, M. Et, and . Nardin, Adhesion Promotion Techniques : Technological Applications, Mittal et Pizzi, pp.1-26, 1999.

K. A. Scott, Economic Feasibility of Implementing a Resin Distribution Measurement System for MDF Fiber, Thesis submitted to the Faculty of Virginia Polytechnic and State University, 2001.

M. Sernak, J. Resnik, and F. Kamke, Penetration of liquid UF adhesive into beech wood, Wood Fib Sci, vol.31, issue.1, pp.41-48, 1999.

V. Shadurka, W. H. Binder, M. Dunky, and W. Kantner, Blocked isocyanates in UF resins: reaction pathways and cross-linking, Proceedings of the 7th panel products symposium, pp.57-69, 2003.

V. W. Shadurka, M. Binder, W. Dunky, and . Kantner, Reactions Pathways of Blocked Isocy-anates in UF-resins"; Presentation: PHOPOC Conference on Physical Organic and Polymer Chemis-try, PHOPOC Conference Proceedings, 2003.

T. Shupe and C. Hse, Conditions of application for straw particleboard, 2006.

C. Simon, B. George, and A. Pizzi, Copolymerization in UF/pMDI adhesives networks, Journal of Applied Polymer Science, vol.56, issue.14, pp.3681-3685, 2002.
DOI : 10.1007/978-3-662-10207-7

C. Soulard, C. Kamoun, and A. Pizzi, Uron and uron-urea-formaldehyde resins, Journal of Applied Polymer Science, vol.19, issue.2, p.277, 1999.
DOI : 10.1080/00218468608071217

H. Thoemen, Die Entstehung des Rohdichteprofils beim Heisspressen von Holzwerkstof-fen , Tagungsband Holzwerkstoff-Workshop : Pressen von Holzwerkstoffen, aktuelle Trends und Per-spektiven, 07, p.2, 2002.

A. Thumm, A. Mcdonald, and L. Donaldson, Visualisation of UF resin in MDF by cathodoluminescence/ scanning electron microscopy, Holz als Roh- und Werkstoff, vol.59, issue.3, pp.215-216, 2001.
DOI : 10.1007/s001070100196

A. Thumm and W. J. Grigsby, Interaction of Wax and UF Resin in MDF: Qualitative Analy-sis of the Relationships Between Wax and Resin on MDF Fibre, Proceedings of 6th European Panel-Products Symposium, pp.9-11, 2002.

A. Trinkelenberg, H. W. Vaessen, and K. W. Suen, Combinations of low formaldehyde-aminoplast glues and PMDI, J, vol.14, pp.219-231, 1982.

W. Wang, X. Zhang, and R. Lu, Low formaldehyde. emission particleboard bonded by MDI-UF mixture adhesive, For. Prod. J, issue.9, pp.54-90, 2004.

X. M. Wang, B. Riedl, A. W. Christiansen, and R. L. Greimer, The effects of temperature and humidity on phenol-formaldehyde resin bonding, Wood Science and Technology, vol.29, issue.4, pp.253-266, 1995.
DOI : 10.1007/BF00202085

P. M. Winistorfer, S. Wang, and W. W. Moschler, Vertical Density Profile-Thickness Swell Rela-tionship in Wood-Based Panels, USDA National Research Initiative Competitive Grants Program, USDA Final Report, pp.95-37103, 1999.

S. Wieland, A. Pizzi, and W. Grigsby, Description of the Confocal laser scanning microscopy (CLSM) to examine fibre-adhesive interactions of UF/MDI Hybrid Adhesives, Power Point Presentation parallel Working Group session of WG3, COST E 34 Conference, 2005.

S. Wieland, A. Pizzi, S. Hill, W. Grigsby, and F. Pichelin, The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation, Journal of Applied Polymer Science, vol.72, issue.2, pp.1624-1632, 2006.
DOI : 10.1002/app.23679

P. Wulf, Investigation of the wetting characteristics of medium density fiberboards (MDF) by means of contact angle measurements, Holz als Roh ? und Werkstoff, pp.331-335, 1997.

C. Xing, B. Riedl, and A. Cloutier, Measurement of urea-formaldehyde resin distribution as a function of MDF fiber size by laser scanning microscopy, Wood Science and Technology, vol.37, issue.6, pp.495-507, 2004.
DOI : 10.1007/s00226-003-0195-3

C. Xing, Characterization of urea-formaldehyde resin efficiency in medium density fiberboard manufacture, 2005.

J. Youngquist, G. Myers, and L. Murmanis, Resin distribution in hardboard: evaluated by internal bond strength and fluorescence microscopy, pp.215-224, 1987.

M. Zanetti and A. Et-pizzi, Colloidal aggregation of MUF polycondensation resins: Formulation influence and storage stability, Journal of Applied Polymer Science, vol.157, issue.4, pp.2690-2699, 2004.
DOI : 10.1002/prac.19401570102

C. Zhao and A. Et-pizzi, Hot postcuring improvement of MUF-bonded particleboards and its temperature forecasting model, Holz als Roh- und Werkstoff, vol.58, issue.5, pp.307-308, 2000.
DOI : 10.1007/s001070050434

J. Zheng, S. C. Fox, and C. E. Frazier, Rheological, wood penetration and fracture performance studies of PF/pMDI hybrid resins, Forest Products Jounal, vol.54, issue.10, pp.74-81, 2004.

S. Wieland, A. Pizzi, S. Hill, W. Grigsby, and F. Pichelin, The reaction in water of UF resins with isocyanates at short curing times: A13C NMR investigation, Journal of Applied Polymer Science, vol.72, issue.2, pp.1624-1632, 2006.
DOI : 10.1002/app.23679

F. Pichelin, . Nakatani, . Pizzi, . Wieland, S. Despres et al., Structural beams from thick wood panels bonded industrially with formaldehydefree tannin adhesives, Forest Products Journal, vol.56, issue.5, pp.31-36, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00187312

S. Wieland, A. Pizzi, W. Grigsby, J. Warnes, and F. Pichelin, Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins, Journal of Applied Polymer Science, vol.45, issue.4, 2007.
DOI : 10.1002/app.24757

S. Wieland, A. Pizzi, W. Grigsby, J. Warnes, and F. Pichelin, Studies of UF / Isocyanate Hybrid Adhesives, Proceedings 8 th Wood Adhesives Symposium, 2005.

F. Pichelin and S. Wieland, Formaldehyde free boards with Tannin, 2003.

S. Wieland, . E49, . Wood, and . Bond, COST Etude des relations entre les adhésifs UF/pMDI hybrides et les caractéristiques des panneaux finis pour la fabrication de panneaux à base de bois à faible émissions de formaldéhyde, 2007.

S. Wieland, Use of Confocal Laser Scanning Microscopy (CLSM) to examine fibreadhesive interactions, Cost Action E34: Bonding of Timber. State of the Art-Report, 2006.

S. Wieland, A. Pizzi, and W. Grigsby, Description of the Confocal laser scanning microscopy (CLSM) to examine fibre-adhesive interactions of UF/MDI Hybrid Adhesives " , Power Point Presentation, parallel Working Group session WG 3, COST E 34 Conference, 2005.

S. Wieland, A. Pizzi, W. Grigsby, J. Warnes, and F. Pichelin, Studies of UF / Isocyanate Hybrid Adhesives, Poster Presentation, 8 th Wood Adhesives Symposium, 2005.

S. Wieland, A. Pizzi, and F. Pichelin, Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins, Power Point Presentation, COST E 44 and E 49 Conference Wood Resources and Panel Properties, p.14, 2006.
DOI : 10.1002/app.24757

D. Prize and . Research, Tannin Adhesives, Finalist Award de la Catégorie ingénierie, 2005.

J. Leban, S. Pizzi, M. Wieland, M. Zanetti, F. Properzi et al., X-ray microdensitometry analysis of vibration-welded wood, Journal of Adhesion Science and Technology, vol.30, issue.6, pp.673-676, 2004.
DOI : 10.1007/BF00224960

M. S. Properzi, F. Wieland, B. Pichelin, and . Gfeller, Welding of wood, a new challenge for the wood industry, COST E29: INTERNATIONAL SYMPOSIUM on ADVANCED TIMBER and TIMBER-COMPOSITE ELEMENTS for BUILDINGS, 1st Symposium, C.N.R. Research Centre, pp.27-29, 2004.

M. S. Properzi, F. Wieland, B. Pichelin, and . Gfeller, Welding of wood, a new challenge for the wood industry, COST E34 Conference: Innovations in Wood Adhesives, pp.53-60, 2004.

M. Properzi, J. M. Leban, A. Pizzi, S. Wieland, F. Pichelin et al., Influence of grain direction in vibrational wood welding, Holzforschung, vol.11, issue.1, pp.23-27, 2005.
DOI : 10.1163/1568561041588192

A. Pizzi, J. M. Leban, M. Zanetti, F. Pichelin, S. Wieland et al., Oberfl??chenverg??tung mittels mechanisch induzierter Holzoberfl??chenverschmelzung, Holz als Roh- und Werkstoff, vol.47, issue.6, 2005.
DOI : 10.1007/s00107-004-0569-8

M. S. Properzi, F. Wieland, B. Pichelin, and . Gfeller, LWVT? An Innovative Wood Bonding Technique, Conference: Wood Adhesive 2005, 8th Symposium, pp.2-4, 2005.