E. Adler, Lignin chemistry?past, present and future, Wood Science and Technology, vol.17, issue.6, pp.169-218, 1997.
DOI : 10.1139/o63-009

K. W. Allen, Theories of adhesion, in: Packham D.E. Handbook of adhesion, pp.535-538, 2005.

R. H. Atalla and D. L. Vanderhart, The role of solid state NMR spectroscopy in studies of the nature of native celluloses, Solid State Nuclear Magnetic Resonance, vol.15, issue.1, pp.1-19, 1999.
DOI : 10.1016/S0926-2040(99)00042-9

E. L. Back and N. L. Salmén, Glass transitions of wood components hold implications for molding and pulping processes, pp.107-110, 1982.

P. Banerjee, S. Govardhan, H. C. Wikle, J. Y. Liu, and B. A. Chin, Infrared sensing for on-line weld process monitoring and control, J. Manuf. Sci. Eng, vol.115, pp.907-918, 1993.

J. D. Barett and R. O. Foschi, Mode II stress-intensity factors for cracked wood beams, Eng. Fracture Mech, pp.371-378, 1977.

J. F. Bocquet, A. Pizzi, and L. Resch, Full-scale industrial wood floor assembly and structures by welded-through dowels, Holz Roh Werkstoff, pp.149-156, 2007.

J. F. Bocquet, A. Pizzi, A. Despres, H. R. Mansouri, L. Resch et al., Wood joints and laminated wood beams assembled by mechanically-welded wood dowels, Journal of Adhesion Science and Technology, vol.21, issue.3-4, pp.301-317, 2007.
DOI : 10.1007/978-94-015-7764-9

J. Bourgois and R. Guyonnet, Characterization and analysis of torrified wood, Science and Technology, vol.22, pp.143-155, 1988.

E. Brunner, H. G. Karge, and H. Pfeifer, On the correlation between the 1 H NMR chemical shift and the stretching vibration frequency of ?, Z. Phys. Chem, pp.176-173, 1992.

A. L. Buxton, Welding plastics, in: Packham D.E. Handbook of adhesion, pp.583-591, 2005.

C. M. Christensen, The Innovator's Dilemma: When New Technologies Cause Great Firms to Fail, 1997.
DOI : 10.15358/9783800642816

X. Colom, F. Carrillo, F. Nogues, and P. Garriga, Structural analysis of photodegraded wood by means of FTIR spectroscopy, Polymer Degradation and Stability, vol.80, issue.3, pp.543-549, 2003.
DOI : 10.1016/S0141-3910(03)00051-X

H. A. Core, W. A. Cote, and A. C. Day, Wood structure and identification. 2 nd Edition, p.p, 1979.

B. M. Darras, M. A. Omar, and M. K. Khraisheh, Experimental thermal analysis of friction stir processing, Materials Science Forum, pp.539-543, 2007.

V. R. Davé, M. J. Cola, and N. A. Hussen, Heat generation in inertia welding of dissimilar tubes. Weld, J. Res, vol.10, pp.246-252, 2001.

B. D. Davidson, C. S. Altonen, J. J. Polaha, V. R. Deo, and C. R. Saff, Effect of Stacking Sequence on Delamination Toughness and Delamination Growth Behavior in Composite End-Notched Flexure Specimens, Composite Materials: Testing and Design, pp.393-414, 1996.
DOI : 10.1520/STP16556S

R. Ebewele, B. River, and J. A. Koutsky, Tapered double cantilever beam fracture tests of phenolic-wood adhésive joints: Part I. Development of specimen geometry; effects of bondline thickness, wood anisotropy and cure time on fracture energy, pp.197-213, 1979.

D. Erçin and Y. Yürüm, Carbonisation of Fir (Abies bornmulleriana) wood in an open pyrolysis system at 50???300??C, Journal of Analytical and Applied Pyrolysis, vol.67, issue.1, pp.11-22, 2003.
DOI : 10.1016/S0165-2370(02)00011-6

M. J. Fagan, Finite element analysis, Theory and Practice, 1992.

P. Fang and G. D. Mcginnis, FLASH PYROLYSIS OF HOLOCELLULOSE FROM LOBLOLLY PINE BARK, pp.37-47, 1976.
DOI : 10.1016/B978-0-12-637750-7.50007-8

D. Fengel and G. Wegener, Wood chemistry, ultrastructure, reactions, 2003.

D. Fengel, The ultrastructure of cellulose from wood, Wood Science and Technology, vol.334, issue.3, pp.203-217, 1969.

D. Fengel, The ultrastructure of cellulose from wood, Science and Technology, vol.4, issue.1, pp.15-35, 1970.

B. Focher, M. T. Palma, M. Canetti, G. Torri, C. Cosentino et al., Structural differences between non-wood plant celluloses: evidence from solid state NMR, vibrational spectroscopy and X-ray diffractometry, Industrial Crops and Products, vol.13, issue.3, pp.193-208, 2001.
DOI : 10.1016/S0926-6690(00)00077-7

L. Fu, L. Y. Duan, and S. G. Du, Numerical Simulation of Inertia Friction Welding Process by Finite Element Method, pp.65-70, 2003.

M. Funaoka, T. Kako, and I. Ahe, Condensation of lignin during heating of wood, Wood Science and Technology, vol.57, issue.3, pp.277-288, 1990.
DOI : 10.1007/BF01153560

J. M. Gagliano and C. E. Frazier, Improvements in the fracture cleavage testing of adhésively-bonded wood, Wood Fiber Sci, vol.33, pp.377-385, 2001.

C. Gerber and B. Gfeller, Joint connection with welded thermoplastic dowels and Wood Welding Technologies, Proceedings of the World Conference on Timber Engineering, 2000.

B. Gfeller and M. Properzi, Woobration, CTI scientific report, BFH-HSB, 2003.

B. Gfeller, A. Pizzi, M. Zanetti, M. Properzi, F. Pichelin et al., Solid wood joints by in situ welding of structural wood constituants, Holzforschung, vol.58, pp.45-52, 2004.

B. Gfeller, M. Zanetti, M. Properzi, A. Pizzi, F. Pichelin et al., Wood bonding by vibrational welding, Journal of Adhesion Science and Technology, vol.56, issue.1, pp.1573-1589, 2003.
DOI : 10.1007/s001070050269

A. A. Griffith, The Phenomena of Rupture and Flow in Solids, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.221, issue.582-593, pp.163-198, 1921.
DOI : 10.1098/rsta.1921.0006

M. Hakkou, M. Pétrissans, A. Zoulalian, and P. Gérardin, Investigation of wood wettability changes during heat treatment on the basis of chemical analysis, Polymer Degradation and Stability, vol.89, issue.1, pp.1-5, 2005.
DOI : 10.1016/j.polymdegradstab.2004.10.017

J. F. Haw and T. P. Schultz, Carbon-13 CP/MAS NMR and FT-IR Study of Low-Temperature Lignin Pyrolysis, Holzforschung, vol.39, issue.5, pp.289-296, 1985.
DOI : 10.1515/hfsg.1983.37.4.199

S. Hiermaier and . Prozeßverlauf, Schmelzebelastung und Nahtfestigkeiten beim biaxialen Vibrationsschweißen von Polypropylen, 1998.

C. Hill, Wood Modification Chemical, Thermal and Other Processes, 2006.
DOI : 10.1002/0470021748

W. E. Hillis, High temperature and chemical effects on wood stability, pp.281-293, 1984.

K. Hofstetter, B. Hinterstoisser, and L. Salmén, Moisture uptake in native cellulose ??? the roles of different hydrogen bonds: a dynamic FT-IR study using Deuterium exchange, Cellulose, vol.57, issue.6, pp.131-145, 2006.
DOI : 10.1098/rspa.1960.0137

K. M. Holtman, H. Chang, H. Jameel, and J. F. Kadla, C NMR Characterization of Milled Wood Lignins Isolated by Different Milling Techniques, Journal of Wood Chemistry and Technology, vol.4, issue.1, pp.21-34, 2006.
DOI : 10.3891/acta.chem.scand.27-0903

D. G. Hunt and W. P. Croager, Mode II fracture toughness of wood measured by a mixed-mode test method, Journal of Materials Science Letters, vol.10, issue.2, pp.77-79, 1982.
DOI : 10.1007/BF00731031

D. P. Kamdem, A. Pizzi, and A. Jermannaud, Durability of heat-treated wood, Holz als Roh- und Werkstoff, vol.60, issue.1, pp.1-6, 2002.
DOI : 10.1007/s00107-001-0261-1

D. P. Kamdem, A. Pizzi, and M. C. Triboulot, Heat-treated timber: potentially toxic byproducts presence and extent of wood cell wall degradation, Holz als Roh- und Werkstoff, vol.58, issue.4, pp.1-6, 2000.
DOI : 10.1007/s001070050420

D. P. Kamdem, A. Pizzi, R. Guyonnet, and A. Jermannaud, International Research Group (IRG) on Wood Perservation, Document IRG, pp.99-40145, 1999.

F. Kanazawa, A. Pizzi, M. Properzi, L. Delmotte, and F. Pichelin, Parameters influencing wood-dowel welding by high-speed rotation, Journal of Adhesion Science and Technology, vol.22, issue.12, pp.1025-1038, 2005.
DOI : 10.1007/BF01160778

C. T. Keith and C. C. , Properties of heat-darkened wood. I. Hygroscopic properties, Canada, 1978.

W. Killmann and L. T. Hong, Rubberwood ? the success of an agricultural by-product, pp.66-72, 2000.

D. Y. Kim, Y. Nishiyama, M. Wada, S. Kuga, and T. Okano, Thermal Decomposition of Cellulose Crystallites in Wood, Holzforschung, vol.38, issue.5, pp.521-524, 2001.
DOI : 10.1023/A:1018435806488

A. J. Kinloch, Fracture Mechanics, pp.206-207, 2005.
DOI : 10.1007/978-94-017-1594-2_3

F. Kollmann and D. Fengel, On the sorption-behaviour of heat stabilized wood, Holz als Roh- und Werkstoff, vol.2, issue.Nr. 11, pp.77-85, 1965.
DOI : 10.1007/BF02617865

K. Komatsu, H. Sasaki, and T. Maku, Estimating Fracture Toughness from Nonlinear Load-Deflection Relation, Wood Res, pp.80-92, 1976.

T. Koshijima and T. Watanabe, Association between Lignin and Carbohydrates in Wood and Other Plant Tissues. Springer series in wood science, 2003.

M. Ko?ík, M. Dandárová, and R. Domanský, Pyrolyse des Buchenholzes bei niedrigen Temperaturen IX.: Chemische Veränderungen im Buchenholz während der Pyrolyse, Holzforschung Holzverwendung, vol.21, pp.40-43, 1969.

M. Ko?ík, F. Kozmál, V. Reiser, and R. Domanský, Pyrolyse des Buchenholzes bei niedrigen Temperaturen I.: Der gegenwärtige Stand unserer Erkenntnisse über den Mechanismus der Pyrolyse der Holzpolysaccharide, Holzforschung Holzverwendung, vol.20, pp.11-15, 1968.

I. Kubiszyn and A. Pietras, Numerical modelling of the friction-welding process, Welding International, vol.17, issue.6, pp.425-430, 2003.
DOI : 10.1533/wint.2003.3136

E. V. Kulticova, Structure and proprieties relationship of densified wood, 1999.

P. Lavisci, B. Pizzo, J. M. Gagliano, P. Triboulot, D. Ciechi et al., Fracture energy testing of thick joints with structural wood adhésives, Holz als Roh, pp.355-357, 2003.

L. Fichoux and E. , Présentation et utilisation de CASTEM Accessible sur http, 1998.

J. M. Leban, A. Pizzi, S. Wieland, M. Zanetti, M. Properzi et al., X-ray microdensitometry analysis of vibration-welded wood, Journal of Adhesion Science and Technology, vol.30, issue.6, pp.673-685, 2004.
DOI : 10.1007/BF00224960

C. B. Lin, C. K. Mu, W. W. Wu, and C. H. Hung, The effect of joint design and volume fraction on friction welding proprieties of A360/SiC (p) composites. Weld, J. Res, pp.100-108, 1999.

J. Mackerle, Finite element analyses in wood research: a bibliography, Wood Science and Technology, vol.39, issue.7, pp.579-600, 2005.
DOI : 10.1007/s00226-005-0026-9

J. Mackerle, Finite element analysis and simulation of welding ? an addendum: a bibliography, Modeling Simul, pp.295-318, 1996.

S. Mall, J. F. Murphy, and J. E. Shottafer, Criterion for Mixed Mode Fracture in Wood, Journal of Engineering Mechanics, vol.109, issue.3, pp.680-690, 1983.
DOI : 10.1061/(ASCE)0733-9399(1983)109:3(680)

D. Massiot, Sensitivity and Lineshape Improvements of MQ-MAS by Rotor-Synchronized Data Acquisition, Journal of Magnetic Resonance, Series A, vol.122, issue.2, pp.240-245, 1996.
DOI : 10.1006/jmra.1996.0202

S. L. Maunu, NMR studies of wood and wood products, Progress in Nuclear Magnetic Resonance Spectroscopy, vol.40, issue.2, pp.151-174, 2002.
DOI : 10.1016/S0079-6565(01)00041-3

C. Méalares, Z. Hui, and A. Gandini, Conjugated polymers bearing furan rings: 1. Synthesis and characterization of oligo(2,5-furylene vinylene) and its thiophene homologue, Polymer, vol.37, issue.11, pp.2273-2279, 1996.
DOI : 10.1016/0032-3861(96)85873-3

C. Meola and G. M. Carlomagno, Recent advances in the use of infrared thermography, Measurement Science and Technology, vol.15, issue.9, pp.27-58, 2004.
DOI : 10.1088/0957-0233/15/9/R01

C. Meola, G. M. Carlomagno, A. Squillace, and G. Giorleo, The use of infrared thermography for nondestructive evaluation of joints, Infrared Physics & Technology, vol.46, issue.1-2, pp.93-99, 2004.
DOI : 10.1016/j.infrared.2004.03.013

C. Meola, A. Squillace, F. M. Minutolo, and R. E. Morace, Analysis of stainless steel welded joints: a comparison between destructive and non-destructive techniques, Journal of Materials Processing Technology, vol.155, issue.156, pp.1893-1899, 2004.
DOI : 10.1016/j.jmatprotec.2004.04.303

J. S. Mijovic and J. A. Koutsky, The effect of postcure time on the fracture properties and nodular morphology of an epoxy resin, Wood Sci, pp.164-168, 1979.

G. D. Mckay, Mechanism of thermal decomposition of lignin, Wood and Fiber Science, vol.16, issue.3, pp.441-453, 1984.

H. Nimz, Beech Lignin?Proposal of a Constitutional Scheme, Angewandte Chemie International Edition in English, vol.27, issue.5, pp.313-321, 1974.
DOI : 10.1515/hfsg.1973.27.6.208

D. V. Nishar, J. L. Shiano, W. R. Perkins, and R. A. Weber, Adaptive control of temperature in arc welding, IEEE control system, pp.4-12, 1994.

M. Nuopponen, H. Wikberg, T. Vuorinen, S. L. Maunu, S. Jämsä et al., Heat-treated softwood exposed to weathering, Journal of Applied Polymer Science, vol.56, issue.Suppl, pp.2128-2134, 2004.
DOI : 10.1007/s001070050287

A. M. Olsson and L. Salmén, The association of water to cellulose and hemicellulose in paper examined by FTIR spectroscopy, Carbohydrate Research, vol.339, issue.4, pp.813-818, 2004.
DOI : 10.1016/j.carres.2004.01.005

P. Omrani, J. F. Bocquet, A. Pizzi, J. M. Leban, and H. Mansouri, Zig-zag rotational dowel welding for exterior wood joints, Journal of Adhesion Science and Technology, vol.21, issue.10, pp.923-933, 2007.
DOI : 10.1163/156856107780684585

URL : https://hal.archives-ouvertes.fr/hal-01194966

P. Omrani, E. Masson, H. R. Mansouri, and A. Pizzi, Zig-zag rotational dowel welding for exterior wood joints, Journal of Adhesion Science and Technology, vol.21, issue.10, pp.923-933, 2007.
DOI : 10.1163/156856107780684585

URL : https://hal.archives-ouvertes.fr/hal-01194966

S. J. Opella and M. H. Frey, Selection of nonprotonated carbon resonances in solid-state nuclear magnetic resonance, Journal of the American Chemical Society, vol.101, issue.19, p.5854, 1979.
DOI : 10.1021/ja00513a079

K. K. Pandey and A. J. Pitman, FTIR studies of the changes in wood chemistry following decay by brown-rot and white-rot fungi, International Biodeterioration & Biodegradation, vol.52, issue.3, pp.151-160, 2003.
DOI : 10.1016/S0964-8305(03)00052-0

G. Papp, E. Preklet, B. Koíková, E. Barta, L. Tolvaj et al., Effect of UV laser radiation with different wavelengths on the spectrum of lignin extracted from hard wood materials, Journal of Photochemistry and Photobiology A: Chemistry, vol.163, issue.1-2, pp.187-192, 2004.
DOI : 10.1016/S1010-6030(03)00446-5

F. Pichelin, A. Pizzi, and A. Frühwald, Improving oriented strand board proprieties by using high moisture tolerant adhésives, Proceedings of the International Conference on Wood and Wood Fiber Composites, pp.429-438, 2000.

A. Pizzi, Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues, Journal of Adhesion Science and Technology, vol.19, issue.1, pp.829-846, 2006.
DOI : 10.1163/156856105774429037

A. Pizzi, A. Despres, H. R. Mansouri, J. M. Leban, and S. Rigolet, Wood joints by through-dowel rotation welding: microstructure, 13C-NMR and water resistance, Journal of Adhesion Science and Technology, vol.17, issue.5, pp.427-436, 2006.
DOI : 10.1021/ma00138a009

URL : https://hal.archives-ouvertes.fr/hal-00266575

A. Pizzi, J. M. Leban, F. Kanazawa, M. Properzi, and F. Pichelin, Wood dowel bonding by high-speed rotation welding, Journal of Adhesion Science and Technology, vol.1, issue.11, pp.1263-1278, 2004.
DOI : 10.1007/978-3-642-87931-9

A. Porter, On the mechanics of fracture in wood, Forest Products, pp.325-331, 1964.

M. Properzi, J. M. Leban, A. Pizzi, S. Wieland, F. Pichelin et al., Influence of grain direction in vibrational wood welding, Holzforschung, vol.11, issue.1, pp.23-27, 2005.
DOI : 10.1163/1568561041588192

V. Repellin and R. Guyonnet, Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition, Holzforschung, vol.202, issue.23, pp.28-34, 2005.
DOI : 10.3183/NPPRJ-1999-14-02-p129-139

L. Resch, A. Despres, A. Pizzi, J. F. Bocquet, and J. M. Leban, Reibschweiss-Verd??belung von Holzwerkstoffen, Holz als Roh- und Werkstoff, vol.63, issue.5, pp.423-425, 2006.
DOI : 10.1007/s00107-005-0090-8

B. H. River, Fracture of Adhesive-Bonded Wood Joints, pp.151-177, 1994.
DOI : 10.1201/9780203912225.ch15

J. Ropp, Wood processing method for building construction, involves providing stage of thermal processing to change wood's physicochemical structure by weighing wood and based on removal of constitution of water resulting in loss of dry mass of wood, 2007.

R. M. Rowell, Handbook of wood chemistry and wood composites, 2005.

R. M. Rowell and S. L. Levan-green, Thermal Properties, in: Handbook of wood chemistry and wood composites, pp.121-138, 2005.

U. A. Russek, Innovative trends in laser beam welding of thermoplastics, Proceedings of the 2 nd International WLT-Conference on Lasers in Manufacturing LIM, pp.105-111, 2003.

H. P. Ruyter, European patent Appl. No. 89-203170, 1989.

N. L. Salmén, Temperature and Water Induced Softening Behavior of Wood Fiber Based Materials, KTH, 1982.

R. M. Seborg, H. Tarkow, and A. J. Stamm, Effect of heat upon the dimensional stabilization of wood, Journal of Forest Products Research Society, vol.3, pp.59-67, 1953.

M. L. Selbo, End and corner joint construction In: Adhesive bonding of wood, pp.49-55, 1975.

F. Shafizadeh, Acidic hydrolysis of glycosidic bonds, pp.381-383, 1963.

F. Shafizadeh and W. F. Degroot, COMBUSTION CHARACTERISTICS OF CELLULOSIC FUELS, pp.1-17, 1976.
DOI : 10.1016/B978-0-12-637750-7.50005-4

J. F. Siau, Transport processes in wood, 1984.
DOI : 10.1007/978-3-642-69213-0

H. Sivonen, S. L. Maunu, F. Sundholm, S. Jämsä, and P. Viitaniemi, Magnetic Resonance Studies of Thermally Modified Wood, Holzforschung, vol.545791, issue.6, pp.648-654, 2002.
DOI : 10.1021/ma00173a020

E. Sjöström, Wood Chemistry -Fondamentals and Applications, Second Edition, 1993.

I. Smith and S. Vasic, Fracture behaviour of softwood, Mechanics of Materials, vol.35, issue.8, pp.803-815, 2003.
DOI : 10.1016/S0167-6636(02)00208-9

A. J. Stamm, Wood science and technology, pp.312-342, 1964.

B. Stamm, Development of friction welding of wood ? Physical, mechanical and chemical studies, 2005.

B. Stamm, J. Natterer, and P. Navi, Joining wood by friction welding, Holz als Roh-und Werkstoff, p.313, 2005.
DOI : 10.1007/s00107-005-0007-6

B. Stamm, J. Natterer, E. Windeisen, and G. Wegener, Thermal behaviour of polysaccharides in wood during friction welding, Holz als Roh-und Werkstoff 63, p.388, 2005.

B. Sundqvist, Colour change and acid formation in wood during heating, 2004.

B. Sutthof, U. Franz, H. Hentschel, and A. Schaaf, Verfahren zum reibschweissartigen Fügen und Verbinden von Holz, German Patent No, DE, p.2, 1996.

M. Takatani and H. Sasaki, Effect of Glue-line Flexibility on Cleavage Fracture Toughness of Wood-Epoxy Resin Bond System, Wood Res, pp.30-51, 1980.

M. Takatani, R. Hamada, and H. Sasaki, Testing Method for Cleavage-Fracture Toughness of Glue lines in Bonded Wood II. Determination of the Size of the Standard Specimen and Measurement of the Fracture Toughness, Mokuzai Gakkaishi, vol.30, issue.2, pp.130-138, 1984.

T. E. Timell, THE ACID HYDROLYSIS OF GLYCOSIDES: I. GENERAL CONDITIONS AND THE EFFECT OF THE NATURE OF THE AGLYCONE, Canadian Journal of Chemistry, vol.9, issue.6, pp.1456-1472, 1964.
DOI : 10.1021/ja01861a058

B. F. Tjeerdsma, M. Boonstra, A. Pizzi, P. Tekely, and H. Militz, Charakterisieren von thermisch behandeltem Holz: Molekulare Ursachen f??r die Verbesserung der Holzstabilit??t, Holz als Roh- und Werkstoff, vol.48, issue.5, pp.149-153, 1998.
DOI : 10.1021/ie51398a022

D. A. Tod, Tests of adhesion, in: Packham D.E. Handbook of adhesion, pp.533-535, 2005.

B. Toussaint, Autohydrolyse rapide du bois de peuplier Populus Tremula, modifications ultrastructurales, hydrolyse enzymatique, inhibitions et reversions, 1990.

P. Triboulot, P. Jodin, and G. Pluvinage, Validity of fracture mechanics concepts applied to wood by finite element calculation, Wood Science and Technology, vol.61, issue.1, pp.51-58, 1984.
DOI : 10.1007/BF00632130

A. Vairis and M. Frost, Modelling the linear friction welding of titanium blocks, Materials Science and Engineering: A, vol.292, issue.1, pp.8-17, 2000.
DOI : 10.1016/S0921-5093(00)01036-4

G. Valentin and G. Adjanohoun, Applicability of classical isotropic fracture mechanics specimens to wood crack propagation studies, Materials and Structures, vol.6, issue.2, pp.3-13, 1992.
DOI : 10.1007/BF00034654

G. Valentin and P. Caumes, Crack propagation in mixed mode in wood: a new specimen, Wood Science and Technology, vol.34, issue.1, pp.43-53, 1989.
DOI : 10.1115/1.3607864

S. Vasic and I. Smith, Bridging crack model for fracture of spruce, Eng. Fracture Mech, pp.745-760, 2002.

B. Venkatraman, R. Baldev, and M. Menaka, Online infrared detection of inclusions and lack of penetration during welding, Mater. Eval, vol.9, pp.933-937, 2005.

Y. Wang and C. B. , Online sensing of weld penetration using infrared thermography, Opt. Tech. Insp, vol.34, pp.314-320, 1986.

J. J. Weiland and R. Guyonnet, Study of chemical modifications and fungi degradation of thermally modified wood using DRIFT spectroscopy, Holz als Roh-und Werkstoff, vol.61, issue.3, pp.216-220, 2003.
URL : https://hal.archives-ouvertes.fr/emse-00449295

M. S. White and D. Green, Effects of substrate on the fracture toughness of woodadhésive bands, Wood Sci, pp.149-153, 1980.

S. Wieland, B. Shi, A. Pizzi, M. Properzi, M. Stampanoni et al., Vibration welding of wood: X-ray tomography, additives, radical concentration, Forest Products J, vol.55, issue.1, pp.84-87, 2005.

H. Wikberg, Advanced Solid State NMR Spectroscopic Techniques in the Study of Thermally Modified Wood, 2004.

H. C. Wikle, R. H. Kottilingam, R. H. Zee, and B. A. Chin, Infrared sensing techniques for penetration depth control of the submerged arc welding process, Journal of Materials Processing Technology, vol.113, issue.1-3, pp.228-233, 2001.
DOI : 10.1016/S0924-0136(01)00587-8

S. Yildiz and E. Gümü?kaya, The effects of thermal modification on crystalline structure of cellulose in soft and hardwood, Building and Environment, vol.42, issue.1, pp.62-67, 2007.
DOI : 10.1016/j.buildenv.2005.07.009

H. Yoshihara and T. Kawamura, Mode I fracture toughness estimation of wood by DCB test, Composites Part A: Applied Science and Manufacturing, vol.37, issue.11, pp.2105-2113, 2006.
DOI : 10.1016/j.compositesa.2005.12.001

A. Zoulalian and A. Pizzi, Wood-dowel rotation welding ??? a heat-transfer model, Journal of Adhesion Science and Technology, vol.40, issue.2, pp.97-108, 2007.
DOI : 10.1007/s00226-005-0037-6

. Haut=0, 015; Nd_MZ=2;rhomz=1500; Nd_FDR=3;rhofdr=900; Nd_PDR=3;rhopdr=720; Nd_Wood=4;rhowo=720

*. Capacité-calorifique-litem and =. Prog, evoc_b = EVOL MANU 'T' litem 'C' licsp;; * Conductibilité thermique litem = prog 20

C. Manu, CHPO' 1 dech 'T' 20