. Ign, La forêt en chiffres et en cartes, 2012.

. Agreste, Récolte de bois en France métropolitaine de, 2002.

. Agreste, Production de sciages, bois sous rails et merrains en France métropolitaine de, 2005.

A. Lorraine, La filière forêt-bois en Lorraine : des atouts pour l'avenir, 2015.

, Manual of decisions for implementation of directive 98/8/EC concerning the placing on the market of biocidal products, 2011.

H. E. Hoydonckx, Ullmann's Encyclopedia of Industrial Chemistry, 2007.

, Approche de la valorisation actuelle des produits connexes de la filière bois forêt en Lorraine. Situation actuelle et perspectives, 1985.

E. Sjöström and . Wood, Chemistry : Fundamentals and Applications, pp.71-89, 1993.

F. Lebourgeois and P. Merian, Principes et méthodes de la dendrochronologie, p.85, 2012.

P. Triboulot and M. Trouy-triboulot, Matériau bois Structure et caractéristiques. Tech. l'ingénieur, 2012.

R. J. Thomas and . Wood, Structure and Chemical Composition, ACS Symp. Ser, vol.43, pp.1-23, 1977.

D. Fengel and G. Wegener, Wood: chemistry, ultrastructure, reactions, 1984.

M. C. Morais and H. Pereira, Variation of extractives content in heartwood and sapwood of Eucalyptus globulus trees, Wood Sci. Technol, vol.46, pp.709-719, 2012.

I. Miranda, J. Gominho, A. Lourenço, H. Pereira, and . Heartwood, extractives and pulp yield of three Eucalyptus globulus clones grown in two sites, Appita J, vol.60, pp.485-488, 2007.

T. Stevanovic, D. Perrin, . Chimie-du, and . Bois, Presses polytechniques et universitaires romandes, 2009.

G. T. Kirker, A. B. Blodgett, R. A. Arango, P. K. Lebow, and C. A. Clausen, The role of extractives in naturally durable wood species, Int. Biodeterior. Biodegrad, vol.82, pp.53-58, 2013.

H. Nimz, Beech Lignin-Proposal of a Constitutional Scheme, Angew. Chemie, vol.13, pp.313-321, 1974.

N. Takahashi and T. Koshijima, Ester linkages between lignin and glucuronoxylan in a lignincarbohydrate complex from beech (Fagus crenata) wood, Wood Sci. Technol, vol.22, pp.231-241, 1988.

N. Takahashi and K. T. , Molecular properties of lignin carbohydrates complexes from beech (fagus crenata) and pine (Pinus densiflora) woods, Wood Sci. Technol, vol.22, pp.177-189, 1988.

M. Lawoko, G. Henriksson, and G. Gellerstedt, Structural differences between the lignincarbohydrate complexes present in wood and in chemical pulps, Biomacromolecules, vol.6, pp.3467-3473, 2005.

T. E. Timell and . Wood, Hemicelluloses: Part I, Adv. Carbohydr. Chem, vol.19, pp.247-302, 1964.

E. Sjöström and . Wood, Chemistry : Fundamentals and Applications 51-70, 1993.

A. Ebringerová, Structural diversity and application potential of hemicelluloses, Macromol. Symp, vol.232, pp.1-12, 2006.

B. Butterfield and B. Meylan, Three-dimensional structure of wood, pp.6-27, 1980.

J. R. Barnett and . Bonham, Cellulose microfibril angle in the cell wall of wood fibres

, Biol. Rev. Camb. Philos. Soc, vol.79, pp.461-472, 2004.

D. Reis, B. Vian, and J. Roland, Cellulose-glucuronoxylans and plant cell wall structure, Micron, vol.25, pp.171-187, 1994.

. Bois,

B. Leboucher, Fabriquer en bois masif : anticiper les variations, Bouvet, vol.167, 2014.

G. Armand and . Le, , 2002.

, Etude sur les potentialités de développement du Hêtre, 2010.

, G. Fagus sylvatica. EUFORGEN, p.6, 2012.

E. L. Teissier-du-cros and . Hêtre, , 1981.

S. Dapía, V. Santos, and J. C. Parajó, Study of formic acid as an agent for biomass fractionation, Biomass and Bioenergy, vol.22, pp.213-221, 2002.

R. Bodïrlau, C. A. Teaca, and I. Spiridon, Chemical modification of beech wood: effect on thermal stability, BioresourceTechnol, vol.3, pp.789-800, 2008.

M. C. Popescu, C. M. Popescu, G. Lisa, and Y. Sakata, Evaluation of morphological and chemical aspects of different wood species by spectroscopy and thermal methods, J. Mol. Struct, vol.988, pp.65-72, 2011.

A. Demirba?, Relationships between lignin contents and fixed carbon contents of biomass samples, Energy Convers. Manag, vol.44, pp.1481-1486, 2003.

M. Schwiderski, A. Kruse, R. Grandl, and D. Dockendorf, Kinetics of the AlCl3catalyzed xylan hydrolysis during Methanosolv pulping of beech wood, vol.4, pp.45118-45127, 2014.

K. Candelier, Comparison of chemical composition and decay durability of heat treated wood cured under different inert atmospheres: Nitrogen or vacuum
URL : https://hal.archives-ouvertes.fr/hal-01591857

. Degrad and . Stab, , vol.98, pp.677-681, 2013.

M. Simon, Optimization of a formic/acetic acid delignification treatment on beech wood and its influence on the structural characteristics of the extracted lignins, J. Chem

, Technol. Biotechnol, vol.89, pp.128-136, 2014.

, CIRAD. Tropix 7 _ Hêtre, pp.1-4, 2012.

, European Beech | The Wood Database -Lumber Identification (Hardwoods)

, NF EN 350 Durabilité du bois et des matériaux dérivés du bois -Méthodes d'essai et de classification de la durabilité vis-à-vis des agents biologiques du bois et des matériaux dérivés du bois, 2016.

X. Deglise and A. Merlin, Durabilité des bois et problèmes associés, pp.229-276, 2001.

C. A. Clausen, Bacterial Associations with Decaying Wood : a Review, Int. Biodeterior. Biodegradation, vol.37, pp.101-107, 1996.

G. Daniel, Microview of wood under degradation by bacteria and fungi. Wood Deterior. Preserv, pp.34-72, 2003.

R. M. Rowell, Handbook Of Wood Chemistry And Wood Composites, 2005.

D. Dirol, Durabilité des bois et problèmes associés, pp.193-228, 2001.

W. W. Wilcox, Anatomical changes in wood cell walls attacked by fungi and bacteria, Bot. Rev, vol.36, pp.1-28, 1970.

B. Goodell, Y. Qian, and J. Jellison, Fungal Decay of Wood : Soft Rot -Brown Rot -White Rot, Dev. Commer. wood Preserv, vol.982, pp.9-31, 2008.

P. Gérardin, Chimie et biologie de la préservation, 2008.

, Guide pratique : Protection & lutte contre les pathologies du bois dans le bâti, 2015.

A. Pruvost, Durabilité des bois et problèmes associés, pp.105-132, 2001.

A. Pruvost, Durabilité des bois et problèmes associés, pp.133-166, 2001.

, Utilisation du hêtre en construction : le point sur les études FCBA, 2015.

. Termites--ministère-de-l'environnement, . De-l'energie, and . De-la-mer,

A. Gambetta, Durabilité des bois et problèmes associés, pp.167-189, 2001.

, NF EN 335 -Durabilité du bois et des matériaux à base de bois -Classes d'emploi : définitions, application au bois massif et aux matériaux à base de bois, 2013.

D. Dirol, Durabilité des bois et problèmes associés, pp.53-103, 2001.

P. Sablík, K. Giagli, P. Pa?il, J. Baar, and P. Rademacher, Impact of extractive chemical compounds from durable wood species on fungal decay after impregnation of nondurable wood species, Eur. J. Wood Wood Prod, vol.74, pp.231-236, 2016.

A. M. Taylor, B. L. Gartner, and J. Morrell, Heartwood formation and natural durability -a review, Wood Fiber Sci, vol.34, pp.587-611, 2002.

. Nf-en-460, Durabilité du bois et des matériaux dérivés du bois -Durabilité naturelle du bois massif -Guide d'exigences de durabilité du bois pour son utilisation selon les classes de risque, 1994.

, NF EN 351-1 Durabilité du bois et des produits à base de bois -Bois massif traité avec produit de préservation -Partie 1 : classification des pénétrations et rétentions des produits de préservation, 2007.

, Centre technique du bois et de l'ameublement CTBA. Produits de preservation, 2007.

, NF B50-105-3 Durabilité des bois et des matériaux dérivés du bois -Bois et matériaux à base de bois traités avec un produit de préservation préventif -Partie 3 : spécifications de préservation des bois et matériaux à base de bois et attestation de trait, 2014.

B. L. Murphy and J. Brown, Environmental Forensics Aspects of PAHs from Wood Treatment with Creosote Compounds, Environ. Forensics, vol.6, pp.151-159, 2005.

M. H. Freeman, T. F. Shupe, R. P. Vlosky, and H. M. Barnes, Past, Present, and Future of the Wood Preservation Industry, For. Prod. J, vol.8, p.15, 2003.

H. Barnes, Wood preservation. Encyclopedia of Pest Management, pp.719-721, 2007.

D. G. Humphrey, The chemistry of chromated copper arsenate wood preservatives, Rev. Inorg. Chem, vol.22, pp.1-40, 2002.

S. T. Lebow and J. J. Morrell, Interactions of ammoniacal copper zinc arsenate ( ACZA ) with douglas fir, Wood Fiber Sci, vol.27, pp.105-118, 1995.

M. H. Freeman, C. R. Mcintyre, and D. Jackson, A Critical and Comprehensive Review of Boron in Wood Preservation, Proc. Am. Wood Prot. Assoc, pp.279-294, 2009.

C. Hill, Wood modification : Chemical, thermal and other processes, 2006.

D. Hon, Chemical modification of lignocellulosic materials, 1996.

P. O'leary and P. A. Hodges, The relationship between full penetration uptake and swelling of different fluids, Wood Sci. Technol, vol.35, pp.217-227, 2001.

K. Borgin and K. Corbett, Improvement of capillary penetration of liquids into wood by use of supersonic waves, Wood Sci. Technol, vol.4, pp.189-194, 1970.

M. Norimoto, , pp.573-598, 2001.

C. A. Hill, N. S. Cetin, and N. Ozmen, Potential catalysts for the acetylation of wood, Holzforschung, vol.54, pp.269-272, 2000.

J. Z. Li, T. Furuno, S. Katoh, and T. Uehara, Chemical modification of wood by anhydrides without solvents or catalysts, J. Wood Sci, vol.46, pp.215-221, 2000.

G. B. Nagarajappa, K. K. Pandey, A. S. Shinde, H. M. Vagdevi, and . N-bromosuccinimide, NBS)-An efficient catalyst for acetylation of wood, Holzforschung, vol.70, pp.421-427, 2016.

R. M. Rowell, Chemical modification of wood: A short review, Wood Mater. Sci. Eng, vol.1, pp.29-33, 2006.

. Titanwood, The biological effectiveness of wood modified with linear chain carboxylic acid anhydrides against Coniophora puteana, Holz als Roh -und Werkst, vol.60, pp.329-332, 2002.

C. A. Hill, M. D. Hale, G. A. Ormondroyd, J. H. Kwon, and S. C. Forster, Decay resistance of anhydride-modified Corsican pine sapwood exposed to the brown rot fungus Coniophora puteana, Holzforschung, vol.60, pp.625-629, 2006.

C. A. Hill, S. F. Curling, J. H. Kwon, and V. Marty, Decay resistance of acetylated and hexanoylated hardwood and softwood species exposed to Coniophora puteana, Holzforschung, vol.63, pp.619-625, 2009.

C. A. Hill, An investigation of cell wall micropore blocking as a possible mechanism for the decay resistance of anhydride modified wood, Int. Biodeterior. Biodegrad, vol.55, pp.69-76, 2005.

M. J. Ramsden, F. S. Blake, and N. J. Fey, The effect of acetylation on the mechanical properties, hydrophobicity, and dimensional stability of Pinus sylvestris, Wood Sci. Technol, vol.31, pp.97-98, 1997.

N. Özmen, Dimensional stabilisation of fast growing forest species by acetylation, J. Appl. Sci, vol.7, pp.710-714, 2017.

W. D. Schindler and P. Hauser, Chemical finishing of textiles, pp.51-73, 2004.

K. G. Becker, Weatherproof Shaped Beech Wood An Innovation, pp.1-16, 2005.

. Münchinger, Innovation in Window Application, pp.1-37

A. Krause, F. Wepner, Y. Xie, and H. Militz, Development of Commercial Wood Preservatives, vol.982, pp.356-371, 2008.

H. Militz, Treatment of timber with water-soluble dimethylol resin to improve their dimensional stability and durability, Wood Sci. Technol, vol.27, pp.347-357, 1993.

A. Dieste, A. Krause, S. Bollmus, and H. Militz, Physical and mechanical properties of plywood produced with 1.3-dimethylol-4.5-dihydroxyethyleneurea (DMDHEU)-modified veneers of Betula sp. and Fagus sylvatica, Holz als Roh -und Werkst, vol.66, pp.281-287, 2008.

Y. Xie, Effect of treatments with 1,3-dimethylol-4,5-dihydroxy-ethyleneurea (DMDHEU) on the tensile properties of wood, Holzforschung, vol.61, pp.43-50, 2007.

P. Verma, U. Junga, H. Militz, and C. Mai, Protection mechanisms of DMDHEU treated wood against white and brown rot fungi, Holzforschung, vol.63, pp.371-378, 2009.

P. Verma, J. Dyckmans, H. Militz, and C. Mai, Determination of fungal activity in modified wood by means of micro-calorimetry and determination of total esterase activity, Appl. Microbiol. Biotechnol, vol.80, pp.125-133, 2008.

R. Ringman, A. Pilgård, and K. Richter, Effect of wood modification on gene expression during incipient Postia placenta decay, Int. Biodeterior. Biodegrad, vol.86, pp.86-91, 2014.

I. Goldstein and W. Dreher, Stable furfuryl alcohol impregnating solutions, Ind. Eng. Chem, vol.52, pp.57-58, 1960.

S. Lande, M. Westin, and M. Schneider, Properties of furfurylated wood, Scand. J. For. Res, vol.19, pp.22-30, 2004.

T. M. Venås, L. G. Thygesen, and S. Barsberg, Chemical reactions involved in furfurylation od solid wood -An investigation by ATR-IR spectroscopy, 2006.

L. G. Thygesen, S. Barsberg, and T. M. Venås, The fluorescence characteristics of furfurylated wood studied by fluorescence spectroscopy and confocal laser scanning microscopy, Wood Sci. Technol, vol.44, pp.51-65, 2010.

S. Lande, M. Westin, and M. Schneider, Development of modified wood products based on furan chemistry, Mol. Cryst. Liq. Cryst, vol.484, pp.367-378, 2008.

B. Buchelt, T. Dietrich, and A. Wagenführ, Macroscopic and microscopic monitoring of swelling of beech wood after impregnation with furfuryl alcohol, Eur. J. Wood Wood Prod, vol.70, pp.865-869, 2012.

A. P. Dunlop and F. N. Peters, The Nature of Furfuryl Alcohol, Indutrial Eng. Chem, vol.34, p.814

A. Gandini, Furans as offspring of sugars and polysaccharides and progenitors of a family of remarkable polymers: a review of recent progress, Polym. Chem, vol.1, pp.245-251, 2010.

M. Choura, N. M. Belgacem, and A. Gandini, Acid-Catalyzed Polycondensation of Furfuryl Alcohol: Mechanisms of Chromophore Formation and Cross-Linking, Macromolecules, vol.29, pp.3839-3850, 1996.

A. L. Montero, L. A. Montero, R. Martínez, and S. Spange, Ab initio modelling of crosslinking in polymers. A case of chains with furan rings, J. Mol. Struct. THEOCHEM, vol.770, pp.99-106, 2006.

A. Gandini, The furan/maleimide Diels-Alder reaction: A versatile click-unclick tool in macromolecular synthesis, Prog. Polym. Sci, vol.38, pp.1-29, 2013.

S. Lande, M. Eikenes, and M. Westin, Chemistry and ecotoxicology of furfurylated wood, Scand. J. For. Res, vol.19, pp.14-21, 2004.

L. Nordstierna, S. Lande, M. Westin, O. Karlsson, and I. Furó, Towards novel wood-based materials: Chemical bonds between lignin-like model molecules and poly(furfuryl alcohol) studied by NMR, Holzforschung, vol.62, pp.709-713, 2008.

E. M. Wewerka, Investigation of the Polymerization of Furfuryl Alcohol with gel permeation chromatography, J. Appl. Polym. Sci, vol.12, pp.1671-1681, 1968.

T. Kim, Acid-catalyzed furfuryl alcohol polymerization: Characterizations of molecular structure and thermodynamic properties, ChemCatChem, vol.3, pp.1451-1458, 2011.

N. Herold, Effect of maleic anhydride content and ethanol dilution on the polymerization of furfuryl alcohol in wood veneer studied by differential scanning calorimetry, BioResources, vol.8, pp.1064-1075, 2013.

R. Gonzalez, R. Martinez, and P. Ortiz, Polymerization of furfuryl alcohol with trifluoroacetic acid:the influence of experimental conditions, Makromol. Chem, vol.9, pp.1-9, 1992.

E. Baysal, S. K. Ozaki, and M. K. Yalinkilic, Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates, Wood Sci. Technol, vol.38, pp.405-415, 2004.

B. Esteves, L. Nunes, and H. Pereira, Properties of furfurylated wood (Pinus pinaster), Eur. J. Wood Wood Prod, vol.69, pp.521-525, 2011.

A. Pilgard, A. Treu, A. N. Van-zeeland, R. J. Gosselink, and M. Westin, Toxic hazard and chemical analysis of leachates from furfurylated wood, Environ. Toxicol. Chem, vol.29, pp.1918-1924, 2010.

N. Herold, C. Lenz, and A. Pfriem, Changes in Cell Wall Dimensions during the Different Stages of Furfuryl Alcohol Modification, BioResources, vol.9, pp.4756-4763, 2014.

W. L. Magalhaes and R. R. Da-silva, Treatment of caribbean pine by in situ polymerization of styrene and furfuryl alcohol, J. Appl. Polym. Sci, vol.91, pp.1763-1769, 2004.

H. E. Hoydonckx, W. M. Van-rhijn, W. Van-rhijn, and D. Hueting, Renewable furfuryl resin technology for wood modification, European Conference on Wood Modification, pp.81-86, 2007.

P. Brynildsen and E. Myhre, Commercial development of VisorWood and Kebony Furfurylated Wood, European Conference on Wood Modification, pp.11-18, 2007.

. Kebony and . Kebony,

. Kebony, Essences de bois

H. Epmeier, M. Westin, and A. Rapp, Differently modified wood: Comparison of some selected properties, Scand. J. For. Res, vol.19, pp.31-37, 2004.

A. Pfriem, T. Dietrich, and B. Buchelt, Furfuryl alcohol impregnation for improved plasticization and fixation during the densification of wood, Holzforschung, vol.66, pp.215-218, 2012.

A. Treu, A. Pilglard, S. Puttmann, A. Krause, and M. Westin, Material properties of furfurylated wood for window production, 40th Annual Meeting of The International Research Group on Wood Protection and Beijing, pp.1-13, 2009.

Y. S. Hadi, M. Westin, and E. Rasyid, Resistance of furfurylated wood to termite attack, For. Prod. J, vol.55, pp.85-88, 2005.

M. Westin, A. Rapp, and T. Nilsson, Field test of resistance of modified wood to marine borers, Wood Mater. Sci. Eng, vol.1, pp.34-38, 2006.

E. E. Thybring, The decay resistance of modified wood influenced by moisture exclusion and swelling reduction, Int. Biodeterior. Biodegradation, vol.82, pp.87-95, 2013.

R. Ringman, A. Pilgard, C. Brischke, and K. Richter, Mode of action of brown rot decay resistance in modified wood : A review, Holzforschung, vol.68, pp.239-246, 2014.

P. Gascón-garrido, Resistance of wood modified with different technologies against Mediterranean termites (Reticulitermes spp, Int. Biodeterior. Biodegrad, vol.82, pp.13-16, 2013.

D. Vetter, L. Depraetere, G. Janssen, C. Stevens, M. Van-acker et al., Methodology to assess both the efficacy and ecotoxicology of preservative-treated and modified wood, Ann. For. Sci, vol.65, pp.504-505, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00883411

T. &. Werpy and . Petersen, Top Value Added Chemicals from Biomass Volume I -Results of Screening for Potential Candidates from Sugars and Synthesis Gas Top Value Added Chemicals From Biomass Volume I : Results of Screening for Potential Candidates, 2004.

J. J. Bozell and G. R. Petersen, Technology development for the production of biobased products from biorefinery carbohydrates-the US Department of Energy's 'Top 10' revisited, Green Chem, vol.12, pp.539-594, 2010.

K. J. Zeitsch, The chemistry and technology of furfural and its many by-products, 2000.

, 2-Furaldéhyde (FT 40) -Fiche toxicologique -INRS

R. Mariscal, P. Maireles-torres, M. Ojeda, I. Sádaba, and M. López-granados, Furfural: a renewable and versatile platform molecule for the synthesis of chemicals and fuels, Energy Environ. Sci, vol.9, pp.1144-1189, 2016.

J. P. Lange, E. Van-der-heide, J. Van-buijtenen, and R. Price, Furfural-A promising platform for lignocellulosic biofuels, ChemSusChem, vol.5, pp.150-166, 2012.

B. Wojcik, Catalytic hydrogenation of furan compounds, Ind. Eng. Chem, vol.40, pp.210-216, 1948.

J. Kemp, L. C. Hamilton, G. B. Gross, and H. H. , Furfural as a Selective Solvent in Petroleum Refining, Ind. Eng. Chem, vol.40, pp.220-227, 1948.

E. R. Garrett and B. H. Dvorchik, Kinetics and mechanisms of the acid degradation of the aldopentoses to furfural, J. Pharm. Sci, vol.58, pp.813-820, 1969.

A. S. Mamman, Furfural: Hemicellulose/xylosederived biochemical, Biofuels, Bioprod. Biorefining, vol.2, pp.438-454, 2008.

B. Danon, G. Marcotullio, and W. D. , Mechanistic and kinetic aspects of pentose dehydration towards furfural in aqueous media employing homogeneous catalysis, Green Chem, vol.16, pp.39-54, 2014.

M. B. Fusaro, V. Chagnault, and D. Postel, Reactivity of d-fructose and d-xylose in acidic media in homogeneous phases, Carbohydr. Res, vol.409, pp.9-19, 2015.

B. Y. Anet, 3-deoxyglycosuloses (3-deoxyglycosones) and the degradation of carbohydrates, Adv. Carbohydr. Chem, vol.19, pp.181-218, 1964.

W. A. Bonner and M. R. Roth, The Conversion of D-Xylose-1-C14 into 2-Furaldehyde-?-C14

, J. Am. Chem. Soc, vol.81, pp.5454-5456, 1959.

M. J. Antal, T. Leesomboon, W. S. Mok, and G. N. Richards, Mechanism of formation of 2-furaldehyde from D-xylose, Carbohydr. Res, vol.217, pp.71-85, 1991.

H. D. Mansilla, Acid-catalysed hydrolysis of rice hull: Evaluation of furfural production, Bioresour. Technol, vol.66, pp.189-193, 1998.

. Unctad/gatt, Making and marketing furfural : Added value for agro-industrial wastes, Abstr. Trade Inf. Serv, pp.3-7, 1979.

F. A. Riera, R. Alvarez, and J. Coca, Production of furfural by acid hydrolysis of corncobs, J. Chem. Technol. Biotechnol, vol.50, pp.149-155, 1991.

A. Chareonlimkun, V. Champreda, A. Shotipruk, and N. Laosiripojana, Catalytic conversion of sugarcane bagasse, rice husk and corncob in the presence of TiO2, ZrO2 and mixedoxide TiO2-ZrO2 under hot compressed water (HCW) condition, Bioresour. Technol, vol.101, pp.4179-4186, 2010.

R. Sahu and P. L. Dhepe, A one-pot method for the selective conversion of hemicellulose from crop waste into C5 sugars and furfural by using solid acid catalysts, ChemSusChem, vol.5, pp.751-761, 2012.

W. Sangarunlert, P. Piumsomboon, and S. Ngamprasertsith, Furfural production by acid hydrolysis and supercritical carbon dioxide extraction from rice husk, Korean J. Chem. Eng, vol.24, pp.936-941, 2007.

, Wondu Business and Technology Services. Furfural Chemicals and Biofuels from Agriculture, 2006.

, Global Furfural Market on the Move with Double Digit Growth

, Furfural -Chemical Economics Handbook (CEH) | IHS Markit

D. T. Win, Furfural -Gold from Garbage, Assumpt. Univ. J. Technol, vol.8, pp.185-190, 2005.

C. M. Cai, T. Zhang, R. Kumar, and C. E. Wyman, Integrated furfural production as a renewable fuel and chemical platform from lignocellulosic biomass, J. Chem. Technol. Biotechnol, vol.89, pp.2-10, 2014.

K. J. Zeitsch, Process for the manufacture of furfural, US6743928, vol.1, 2000.

N. Vedernikovs, V. Kampars, and M. Puke, Changes in the Birch Wood Lignocellulosic Composition in the Pretreatment Process, Sci. J. RTU.,Materials Sci. Appl. Chem, vol.22, pp.68-73, 2010.

D. Montané, J. Salvadó, C. Torras, and X. Farriol, High-temperature dilute-acid hydrolysis of olive stones for furfural production, Biomass and Bioenergy, vol.22, pp.295-304, 2002.

M. Li, A Two-Step Conversion of Corn Stover into Furfural and Levulinic Acid in a Water / Gamma-Valerolactone System, BioResources, vol.11, pp.8239-8256, 2016.

. Herrera, S. J. Téllez-luis, J. Ramírez, and M. Vázquez, Production of xylose from sorghum straw using hydrochloric acid, J. Cereal Sci, vol.37, pp.267-274, 2003.

M. Vázquez, M. Oliva, S. J. Téllez-luis, and J. A. Ramírez, Hydrolysis of sorghum straw using phosphoric acid: Evaluation of furfural production, Bioresour. Technol, vol.98, pp.3053-3060, 2007.

S. Gámez, J. J. González-cabriales, J. A. Ramírez, G. Garrote, and M. Vázquez, Study of the hydrolysis of sugar cane bagasse using phosphoric acid, J. Food Eng, vol.74, pp.78-88, 2006.

H. Gao, Production of furfural from waste aqueous hemicellulose solution of hardwood over ZSM-5 zeolite, Bioresour. Technol, vol.172, pp.453-456, 2014.

J. Du, Furfural Formation from Corn Cobs in a One-Pot Method Catalyzed by, International Conference on Advances in Energy and Environmental Science (ICAEES), pp.808-812, 2015.

A. Chareonlimkun, V. Champreda, A. Shotipruk, and N. Laosiripojana, Reactions of C5 and C6-sugars, cellulose, and lignocellulose under hot compressed water (HCW) in the presence of heterogeneous acid catalysts, Fuel, vol.89, pp.2873-2880, 2010.

S. Peleteiro, V. Santos, G. Garrote, and J. C. Parajó, Furfural production from Eucalyptus wood using an Acidic Ionic Liquid, Carbohydr. Polym, vol.146, pp.20-25, 2016.

L. Zhang, H. Yu, and P. Wang, Solid acids as catalysts for the conversion of d-xylose, xylan and lignocellulosics into furfural in ionic liquid, Bioresour. Technol, vol.136, pp.515-521, 2013.

V. Da-silva-lacerda, A kinetic study on microwave-assisted conversion of cellulose and lignocellulosic waste into hydroxymethylfurfural/furfural, Bioresour. Technol, vol.180, pp.88-96, 2015.

C. Rong, Production of furfural from xylose at atmospheric pressure by dilute sulfuric acid and inorganic salts, Carbohydr. Res, vol.350, pp.77-80, 2012.

, Furfural Market Analysis By Application (Furfuryl Alcohol, Solvent) And Segment Forecasts to 2020

, Method for the reduction of furfural and furan derivatives, US 1906873 A, 1928.

, Process for the manufacture of furfuryl alcohol and methylfurane, US 1739919 A, 1927.

H. Adkins and R. Connor, The catalytic hydrogenation of organic compounds over copper chromite, J.Am.Chem.Soc, vol.53, pp.1091-1095, 1931.

, Method of hydrogenation of furfural to furfuryl alcohol, US 2094975 A, 1932.

V. A. Smirnov, V. A. Tushnalobova, and D. Semchenko, Hydrogenation of furfural with alkalimetal amalgams, Chem. Heterocycl. Compd, vol.4, pp.430-431, 1971.

A. E. Eseyin and P. H. Steele, An overview of the applications of furfural and its derivatives, Int. J. Adv. Chem, vol.3, pp.42-47, 2015.

, T 222 om-02 Acid-insoluble in wood and pulp, 2006.

F. Liu, F. Boissou, A. Vignault, L. Lemée, S. Marinkovic et al., Conversion of wheat straw to furfural and levulinic acid in a concentrated aqueous solution of betaine hydrochloride, vol.4, pp.28836-28841, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01188084

, XP ENV 1250-2 : Produits de préservation du bois -Mesurage des pertes de matières activés et d'autres composants du produit de préservation à partir de bois traité -Partie 2 : méthode de laboratoire pour obtenir des échantillons pour analyse pour mesure, pp.1-15, 1995.

, NF EN 113 Produits de préservation du bois -Méthode d'essai pour déterminer l'efficacité protectrice vis-à-vis des champignons basidiomycétes lignivores -Détermination du seuil d'efficacité, 1996.

, NF EN 350-1 Durabilité du bois et des matériaux dérivés du bois -Durabilité naturelle du bois massif -Partie 1 : guide des principes d'essai et de classification de la durabilité naturelle du bois, p.16, 1994.

P. Thèse-edou-engonga, Contribution à la compréhension des modification moléculaires et macromoléculaires intervenant lors du traitement thermique du bois-Effet sur la réactivité chimique et sur la durabilité du matériau, 2001.

, NF EN 310 Panneaux à base de bois -Détermination du module d'élasticité en flexion et de la résistance en flexion, p.8, 1993.

, NF B 51-126 Essai de dureté Brinell, vol.8, 2007.

Z. Targo?ski, Alkali process for enhancing susceptibility of autohydrolysed beech sawdust to enzymatic hydrolysis, Enzyme Microb. Technol, vol.7, pp.126-128, 1985.

M. Schwiderski, A. Kruse, R. Grandl, and D. Dockendorf, Comparison of the influence of a Lewis acid AlCl3 and a Brønsted acid HCl on the organosolv pulping of beech wood, Green Chem, vol.16, p.1569, 2014.

A. Rodríguez-chong, J. A. Ramírez, G. Garrote, and M. Vázquez, Hydrolysis of sugar cane bagasse using nitric acid: A kinetic assessment, J. Food Eng, vol.61, pp.143-152, 2004.

S. J. Téllez-luis, J. A. Ramírez, and M. Vázquez, Mathematical modelling of hemicellulosic sugar production from sorghum straw, J. Food Eng, vol.52, pp.285-291, 2002.

M. T. García-domínguez, Furfural production from Eucalyptus globulus: Optimizing by using neural fuzzy models, Chem. Eng. J, vol.221, pp.185-192, 2013.

F. López, Optimization of furfural production by acid hydrolysis of eucalyptus globulus in two stages, Chem. Eng. J, vol.240, pp.195-201, 2014.

A. Lorraine, La récolte de bois récoltés en Lorraine en, pp.1-4, 2014.

O. Yemi? and G. Mazza, Acid-catalyzed conversion of xylose, xylan and straw into furfural by microwave-assisted reaction, Bioresour. Technol, vol.102, pp.7371-7378, 2011.

A. Avci, B. C. Saha, G. J. Kennedy, and M. A. Cotta, High temperature dilute phosphoric acid pretreatment of corn stover for furfural and ethanol production, Ind. Crops Prod, vol.50, p.478

A. Versari, M. Castellari, U. Spinabelli, and S. Galassi, Recovery of tartaric acid from industrial enological wastes, J. Chem. Technol. Biotechnol, vol.76, pp.485-488, 2001.

R. Devesa-rey, Valorization of winery waste vs. the costs of not recycling, Waste Manag, vol.31, pp.2327-2335, 2011.

, La distillerie transforme les sous-produits vinicoles, 2013.

S. Latieule, Des bioraffineries au service de la filière vinicole | Formule Verte, 2015.

J. Chen, T. Rashid, and G. Feng, Toxicity of formic acid to red imported fire ants, Solenopsis invicta Buren. Pest Manag. Sci, vol.68, pp.1393-1399, 2012.

, Acide méthanoïque -Société Chimique de France

J. Zhang, M. Sun, X. Liu, and Y. Han, Catalytic oxidative conversion of cellulosic biomass to formic acid and acetic acid with exceptionally high yields, Catal. Today, vol.233, pp.77-82, 2014.

C. Alvarez-vasco and X. Zhang, Alkaline hydrogen peroxide pretreatment of softwood: Hemicellulose degradation pathways, Bioresour. Technol, vol.150, pp.321-327, 2013.

S. Rodrigues-dos-santos-rocha, M. Pratto, B. De-sousa-júnior, R. , M. Almeida et al., A kinetic model for hydrothermal pretreatment of sugarcane straw, Bioresour. Technol, vol.228, pp.176-185, 2016.

H. S. Bamufleh, Y. A. Alhamed, and M. A. Daous, Furfural from midribs of date-palm trees by sulfuric acid hydrolysis, Ind. Crops Prod, vol.42, pp.421-428, 2013.

A. M. Orozco, Dilute phosphoric acid-catalysed hydrolysis of municipal bio-waste wood shavings using autoclave parr reactor system, Bioresour. Technol, vol.102, pp.9076-9082, 2011.

W. Yang, P. Li, D. Bo, and H. Chang, The optimization of formic acid hydrolysis of xylose in furfural production, Carbohydr. Res, vol.357, pp.53-61, 2012.

W. Yang, Optimization of furfural production from d-xylose with formic acid as catalyst in a reactive extraction system, Bioresour. Technol, vol.133, pp.361-369, 2013.

I. S. Rafiqul and A. M. Sakinah, Kinetic studies on acid hydrolysis of Meranti wood sawdust for xylose production, Chem. Eng. Sci, vol.71, pp.431-437, 2012.

R. Aguilar, J. A. Ramírez, G. Garrote, and M. Vázquez, Kinetic study of the acid hydrolysis of sugar cane bagasse, J. Food Eng, vol.55, pp.309-318, 2002.

S. Abad, J. L. Alonso, V. Santos, and J. C. Parajó, Furfural from wood in catalyzed acetic acid media: A mathematical assessment, Bioresour. Technol, vol.62, pp.115-122, 1997.

A. Ebringerová and T. Heinze, Xylan and xylan derivatives -Biopolymers with valuable properties, 1: Naturally occurring xylans structures, isolation procedures and properties

, Macromol. Rapid Commun, vol.21, pp.542-556, 2000.

M. E. Himmel, Biomass recalcitrance: engineering plants and enzymes for biofuels production, Science, vol.315, pp.804-811, 2007.

I. S. Rafiqul and A. M. Sakinah, Design of process parameters for the production of xylose from wood sawdust, Chem. Eng. Res. Des, vol.90, pp.1307-1312, 2012.

B. Seemala, V. Haritos, and A. Tanksale, Levulinic Acid as a Catalyst for the Production of 5-Hydroxymethylfurfural and Furfural from Lignocellulose Biomass, ChemCatChem, vol.8, pp.640-647, 2016.

S. Kapu, N. Trajano, and H. , Review of hemicellulose hydrolysis in softwoods and bamboo, Biofuels, Bioprod. Biorefining, vol.8, pp.857-870, 2014.

R. Hu, L. Lin, T. Liu, and S. Liu, Dilute sulfuric acid hydrolysis of sugar maple wood extract at atmospheric pressure, Bioresour. Technol, vol.101, pp.3586-3594, 2010.

R. Rao, A. Dandekar, R. T. Baker, and M. A. Vannice, Properties of Copper Chromite Catalysts in Hydrogenation Reactions, J. Catal, vol.171, pp.406-419, 1997.

B. M. Nagaraja, A. H. Padmasri, B. David-raju, and K. S. Rama-rao, Vapor phase selective hydrogenation of furfural to furfuryl alcohol over Cu-MgO coprecipitated catalysts, J. Mol. Catal. A Chem, vol.265, pp.90-97, 2007.

B. M. Nagaraja, A highly efficient Cu/MgO catalyst for vapour phase hydrogenation of furfural to furfuryl alcohol, Catal. Commun, vol.4, pp.287-293, 2003.

J. Wu, Vapor phase hydrogenation of furfural to furfuryl alcohol over environmentally friendly Cu-Ca/SiO2 catalyst, Catal. Commun, vol.6, pp.633-637, 2005.

R. S. Rao, R. Terry, K. Baker, and M. Albert-vannice, Furfural hydrogenation over carbonsupported copper, Catal. Letters, vol.60, pp.51-57, 1999.

J. Kije?ski, P. Winiarek, T. Paryjczak, A. Lewicki, and A. Mikolajska, Platinum deposited on monolayer supports in selective hydrogenation of furfural to furfuryl alcohol, Appl. Catal. A Gen, vol.233, pp.171-182, 2002.

M. M. Villaverde, N. M. Bertero, T. F. Garetto, and A. J. Marchi, Selective liquid-phase hydrogenation of furfural to furfuryl alcohol over Cu-based catalysts, Catal. Today, vol.213, pp.87-92, 2013.

R. V. Sharma, U. Das, R. Sammynaiken, and A. K. Dalai, Liquid phase chemo-selective catalytic hydrogenation of furfural to furfuryl alcohol, Appl. Catal. A Gen, vol.454, pp.127-136, 2013.

V. V. Pushkarev, N. Musselwhite, K. An, S. Alayoglu, and G. Somorjai, High structure sensitivity of vapor-phase furfural decarbonylation/hydrogenation reaction network as a function of size and shape of Pt nanoparticles, Nano Lett, vol.12, pp.5196-201, 2012.

R. M. Mironenko, Effect of the nature of carbon support on the formation of active sites in Pd/C and Ru/C catalysts for hydrogenation of furfural, Catal. Today, vol.249, pp.145-152, 2015.

K. Fulajtárova, Aqueous phase hydrogenation of furfural to furfuryl alcohol over Pd-Cu catalysts, Appl. Catal. A Gen, vol.502, pp.78-85, 2015.

G. Brieger and T. J. Nestrick, Catalytic transfer hydrogenation, Chem. Rev, vol.74, pp.567-580, 1974.

J. A. Turner, A Realizable Renewable Energy Future, Science, vol.285, pp.687-689, 1999.

J. D. Holladay, J. Hu, D. L. King, and Y. Wang, An overview of hydrogen production technologies, Catal. Today, vol.139, pp.244-260, 2009.

S. Enthaler, V. Langermann, and T. Schmidt, Carbon dioxide and formic acid -the couple for environmental-friendly hydrogen storage ?, Energy Environ. Sci, vol.3, pp.1207-1217, 2010.

C. Ortiz-cervantes, M. Flores-alamo, and J. Garcia, Hydrogenation of biomass-derived levulinic acid into ?-valerolactone catalyzed by palladium complexes, ACS Catal, vol.5, pp.1424-1431, 2015.

M. Chia and J. A. Dumesic, Liquid-phase catalytic transfer hydrogenation and cyclization of levulinic acid and its esters to ?-valerolactone over metal oxide catalysts, Chem. Commun, vol.47, pp.12233-12235, 2011.

A. Zoran, Y. Sasson, and J. Blum, Catalytic transfer hydrogenation of unsaturated compounds by solid sodium formate in the presence of palladium on carbon, J. Mol. Catal, vol.26, pp.321-326, 1984.

O. Arkad, H. Wiener, N. Garti, and Y. Sasson, Catalytic transfer hydrogenation of soybean oil methyl ester using inorganic formic acid salts as donors, J. Am. Oil Chem. Soc, vol.64, pp.1529-1532, 1987.

H. Wiener and J. B. Sasson, Studies on the Mechanism of Transfer Hydrogenation of Nitroarenes by Formate Salts Catalyzed by Pd/C, J. Organomet. Chem, vol.56, pp.4481-4486, 1991.

Y. Gao, S. Jaenicke, and G. Chuah, Highly Efficient Transfer Hydrogenation of Aldehydes and Ketones using Potassium Formate over AlO(OH)-Entrapped Ruthenium Catalysts, Appl. Catal. A Gen, vol.484, pp.51-58, 2014.

H. Wiener, Y. Sasson, and J. Blum, Palladium-catalyzed decomposition metal formate solutions, J. Mol. Catal, vol.35, pp.277-284, 1986.

R. Bar, Y. Sasson, and J. Blum, Transition metal-catalyzed transfer reduction of saturated aldehydes and ketones by sodium formate under phase transfer conditions, J. Mol. Catal, vol.26, pp.327-332, 1984.

S. Ram and L. D. Spicer, Temperature and Solvent Dependent Catalytic Transfer Hydrogenolysis in Aromatic Aldehydes and Ketones Via Ammonium Formate

, Commun, vol.22, pp.2673-2681, 1992.

P. P. Pande, G. C. Joshi, and C. S. Mathela, Catalytic transfer hydrogenation of unsaturated ketones and imides via ammonium formate, Synth. Commun, vol.28, pp.4193-4200, 1998.

X. Wu, X. Li, M. Mcconville, O. Saidi, and J. Xiao, Beta-Amino alcohols as ligands for asymmetric transfer hydrogenation of ketones in water, J. Mol. Catal. A Chem, vol.247, pp.153-158, 2006.

S. Baldino, S. Facchetti, H. G. Nedden, A. Zanotti-gerosa, and W. Baratta, Chemoselective Transfer Hydrogenation of Aldehydes with HCOONH 4 Catalyzed by RuCl

, Pincer Complexes. ChemCatChem, vol.8, pp.3195-3198, 2016.

L. He, Aqueous room-temperature gold-catalyzed chemoselective transfer hydrogenation of aldehydes. Chem. -A Eur, J, vol.15, pp.11833-11836, 2009.

N. Chavda, A. Trivedi, J. Thakarda, Y. K. Agrawal, and P. Maity, Size Specific Activity of Polymer Stabilized Gold Nanoparticles for Transfer Hydrogenation Catalysis, Catal. Letters, vol.146, pp.1331-1339, 2016.

T. Gartiser, C. Selve, and J. J. Delpuech, Reduction d'azides en amines par le formiate d'ammonium par 'Transfert d'Hydrogene Catalyse' (CTH), Tetrahedron Lett, vol.24, pp.1609-1610, 1983.

G. R. Brown and A. Foubister, Direct transformation of cyano into methyl groups under mild conditions, Synthesis (Stuttg), vol.12, pp.1036-1037, 1982.

K. Hattori, H. Sajiki, and K. Hirota, Chemoselective control of hydrogenation among aromatic carbonyl and benzyl alcohol drivatives using Pd/C(en) catalyst, Tetrahedron, vol.57, pp.4817-4824, 2001.

S. V. Ley, A. J. Stewart-liddon, D. Pears, R. H. Perni, and K. Treacher, Hydrogenation of aromatic ketones, aldehydes, and epoxides with hydrogen and Pd(0)EnCat 30NP, Beilstein J. Org. Chem, vol.2, 2006.

M. Baidossi, A. V. Joshi, S. Mukhopadhyay, and Y. Sasson, Pd/C-catalyzed transferhydrogenation of benzaldehydes to benzyl alcohols using potassium formate as the selective hydrogen donor, Synth. Commun, vol.34, pp.643-650, 2004.

. O'driscoll, J. J. Leahy, and T. Curtin, The influence of metal selection on catalyst activity for the liquid phase hydrogenation of furfural to furfuryl alcohol, Catal. Today, vol.279, pp.194-201, 2017.

G. Wienhöfer, F. A. Westerhaus, K. Junge, and M. Beller, Fast and selective iron-catalyzed transfer hydrogenations of aldehydes, J. Organomet. Chem, vol.744, pp.156-159, 2013.

Z. Wang, Chemoselective Transfer Hydrogenation of Aldehydes and Ketones with a Heterogeneous Iridium Catalyst in Water, Catal. Letters, vol.145, pp.1008-1013, 2015.

T. Wang, J. A. Glasper, and B. H. Shanks, Kinetics of glucose dehydration catalyzed by homogeneous Lewis acidic metal salts in water, Appl. Catal. A Gen, vol.498, pp.214-221, 2015.

W. Yang and A. Sen, Direct catalytic synthesis of 5-Methylfurfural from biomass-derived carbohydrates, ChemSusChem, vol.4, pp.349-352, 2011.

J. Miller and P. De-benneville, Notes -Reaction of ethyl acrylate with methyl n-hexyl ketone, J. Org. Chem, vol.22, pp.1268-1269, 1957.

T. Wang, Catalytic Transfer Hydrogenation of Biobased HMF to 2,5-Bis-(Hydroxymethyl)Furan over Ru/Co3O 4, Catalysts, vol.7, 2017.

V. V. Stonkus, Z. G. Yuskovets, and M. Shimanskaya, Characteristics of the catalytic hydrogenation of 5-methylfurfural, Chem. Heterocycl. Compd, vol.26, pp.1214-1218, 1990.

J. Gmeiner, M. Seibicke, S. Behrens, B. Spliethoff, and O. Trapp, Investigation of the Hydrogenation of 5-Methylfurfural by Noble Metal Nanoparticles in a Microcapillary Reactor, ChemSusChem, vol.9, pp.583-587, 2016.

Z. G. Yuskovets and M. Shimanskaya, Reduction of aldehydes of the furan series by the method of catalytic hydrogen transfer, Chem. Heterocycl. Compd, vol.26, pp.620-624, 1990.

X. Lu, Y. Zhang, M. Zhang, and T. Li, The effect of substituents on the hydrogenation of an aldehyde catalyzed by Knölker's catalyst, J. Organomet. Chem, vol.749, pp.69-74, 2014.

E. Takata, T. Tsuruoka, K. Tsutsumi, Y. Tsutsumi, and K. Tabata, Production of xylitol and tetrahydrofurfuryl alcohol from xylan in napier grass by a hydrothermal process with phosphorus oxoacids followed by aqueous phase hydrogenation, Bioresour. Technol, vol.167, pp.74-80, 2014.

C. Chang, P. Cen, and X. Ma, Levulinic acid production from wheat straw, Bioresour. Technol, vol.98, pp.1448-1453, 2007.

S. Xu, D. Yu, T. Ye, and P. Tian, Catalytic transfer hydrogenation of levulinic acid to ?valerolactone over a bifunctional tin catalyst, RSC Adv, vol.7, pp.1026-1031, 2017.

M. Schneider, Furan polymer impregnated wood, 2006.

W. Li, D. Ren, X. Zhang, H. Wang, and Y. Yu, The Furfurylation of Wood : A Nanomechanical Study of Modified Wood Cells, BioResources, vol.11, pp.3614-3625, 2016.

R. Gonzalez, J. M. Figueroa, and H. Gonz, Furfuryl alcohol polymerisation by iodine in methylene chloride, Eur. Polym. J, vol.38, pp.287-297, 2002.

L. Cheng and W. J. Tseng, Effect of acid treatment on structure and morphology of carbons prepared from pyrolysis of polyfurfuryl alcohol, J. Polym. Res, pp.391-399, 2010.

H. Ünver and Z. Öktem, Controlled cationic polymerization of furfuryl alcohol, Eur. Polym. J, vol.49, pp.1023-1030, 2013.

B. W. Manders, Solid-State 13 C NMR Determination of the Syringyl / Guaiacyl Ratio in Hardwoods, Holzforschung, vol.41, pp.13-18, 1987.

M. .. Boonstra, A. Pizzi, P. Tekely, and J. Pendlebury, Chemical Modification of Norway Spruce and Scots Pine. A 13C NMR CP-MAS Study of the Reactivity and Reactions of

, Polymeric Wood Components with Acetic Anhydride, Holzforschung, vol.50, pp.215-220, 1996.

G. Gilardi, L. Abis, and A. E. Cass, Carbon-13 CP / MAS solid-state NMR and FT-IR spectroscopy of wood cell wall biodegradation, Enzyme, vol.17, pp.268-275, 1995.

K. Fackler and M. Schwanninger, How spectroscopy and microspectroscopy of degraded wood contribute to understand fungal wood decay, Appl. Microbiol. Biotechnol, pp.587-599, 2012.

A. J. Stamm and . Wood, Technology: Chemical Aspects, pp.141-149, 1977.

S. Lande, M. Westin, and M. Schneider, Eco-efficient wood protection Furfurylated wood as alternative to, Manag. Environ. Qual, vol.15, pp.529-540, 2004.

M. Principe, R. Martínez, P. Ortiz, and J. Rieumont, The polymerization of furfuryl alcohol with p-toluenesulfonic acid: photocross-linkeable feature of the polymer, Polímeros, vol.10, pp.8-14, 2000.

Y. Dong, Y. Qin, K. Wang, Y. Yan, and S. Zhang, Assessment of the Performance of Furfurylated Wood and Acetylated Wood : Comparison among Four Fast, BioResources, vol.11, pp.3679-3690, 2016.

S. Lande, M. Eikenes, M. Westin, and M. Schneider, Development of Commercial Wood Preservatives, pp.337-355, 2008.

A. Klüppel, Hardness and indentation modulus of resin-treated wood, Int. Wood Prod. J, vol.8, pp.41-44, 2017.

K. Szymona, P. Borysiuk, H. San, P. 'ng, K. Ling-chin et al., Valorization of waste oil palm ( Elaeis guineensis Jacq .) biomass through furfurylation, Mater. Des, vol.53, pp.425-429, 2014.

R. Devi and T. Maji, Chemical modification of simul wood with styrene -acrylonitrile copolymer and organically modified nanoclay, Wood Sci. Technol, vol.46, pp.299-315, 2012.

A. Pilgard and G. Alfredsen, A better understanding of the mode of action of furfurylated wood, Proceedings of the 5th meeting of the Nordic Baltic Network in wood material science and engineering (WSE), pp.13-19, 2009.

A. Pilgard, G. Alfredsen, and A. Hietala, Quantification of fungal colonization in modified wood : Quantitative real-time PCR as a tool for studies on Trametes versicolor, Holzforschun, vol.64, pp.645-651, 2010.

W. Li, H. Wang, and D. Ren, Wood modification with furfuryl alcohol catalysed by a new composite acidic catalyst, Wood Sci. Technol, vol.49, pp.845-856, 2015.

M. Yao, Y. Yang, J. Song, Y. Yu, and Y. Jin, Lignin-based catalysts for Chinese fir furfurylation to improve dimensional stability and mechanical properties, Ind. Crop. Prod, vol.107, pp.38-44, 2017.

N. Tippkötter, A. Duwe, S. Wiesen, T. Sieker, and R. Ulber, Enzymatic hydrolysis of beech wood lignocellulose at high solid contents and its utilization as substrate for the production of biobutanol and dicarboxylic acids, Bioresour. Technol, vol.167, pp.447-455, 2014.

R. Bodirlau, C. Spiridon, and I. , Maleic anhydride treatment of softwood -Effect on wood structure and properties, Cellul. Chem. Technol, vol.48, pp.863-868, 2014.

Y. Iwamoto and T. Itoh, Vapor phase reaction of wood with maleic anhydride ( I ): dimensional stability and durability of treated wood, J. Wood Chem. Technol, vol.51, pp.595-600, 2005.

Y. Dong, Y. Yan, and S. Zhang, Flammability and physical -mechanical properties assessment of wood treated with furfuryl alcohol and nano-SiO 2, Eur. J. Wood Prod, vol.73, pp.457-464, 2015.

H. Stahl and C. Wermuth, Handbook of Pharmaceutical Salts Properties, Selection, and Use, 2011.

T. Kim, Effects of solvent on the furfuryl alcohol polymerization reaction: UV Raman spectroscopy study, Catal. Today, vol.205, pp.60-66, 2013.

Y. Dong, Y. Yan, S. Zhang, J. Li, and . Wood, Polymer Nanocomposites Prepared by Impregnation with Furfuryl Alcohol and Nano-SiO 2, BioResources, vol.9, pp.6028-6040, 2014.

A. Stamm, Wood Technology: Chemical Aspects, vol.244, p.245, 1977.