P. Alexandridis, T. Hatton, and J. Holzwarth, Micellization of poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) triblock copolymers in aqueous solutions: thermodynamics of copolymer association, Macromolecules (United States), vol.27, issue.9, 1994.

P. Alexandridis and T. A. Hatton, Poly (ethylene oxide) poly (propylene oxide) poly (ethylene oxide) block copolymer surfactants in aqueous solutions and at interfaces: thermodynamics, structure, dynamics, and modeling, Colloids Surf. A: Physicochem. Eng. Aspects, vol.96, issue.1, pp.1-46, 1995.

O. A. Alvarez, L. Choplin, V. Sadtler, P. Marchal, M. Stébé et al., Influence of semibatch emulsification process conditions on the physical characteristics of highly concentrated water-in-oil emulsions, Ind. Eng. Chem. Res, vol.49, issue.13, pp.6042-6046, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00799036

A. Avranas, E. Malasidou, and I. Mandrazidou, Adsorption of cetyldimethylbenzylammonium chloride on octane emulsions droplets: the effect of the presence of tween 80, J. Colloid Interface Sci, vol.207, issue.2, pp.363-370, 1998.

M. Baurngaertel, M. Rosa, J. Machado, M. Masse, and H. Winter, The relaxation time spectrum of nearly monodisperse polybutadiene melts, Rheol. Acta, vol.31, issue.1, pp.75-82, 1992.

A. Beerbower and M. Hill, Application of the cohesive energy ratio (CER) concept to anionic emulsifiers, Am. Cosmet. Perfum, vol.87, p.85, 1972.

B. R. Blomqvist, T. Wärnheim, and P. M. Claesson, Surface rheology of PEO-PPO-PEO triblock copolymers at the air-water interface: comparison of spread and adsorbed layers, Langmuir, vol.21, issue.14, pp.6373-6384, 2005.

C. Bower, C. Gallegos, M. Mackley, and J. Madiedo, The rheological and microstructural characterisation of the non-linear flow behaviour of concentrated oil-in-water emulsions, Rheol. Acta, vol.38, issue.2, pp.145-159, 1999.

M. Briceno, J. Salager, and J. Bertrand, Influence of dispersed phase content and viscosity on the mixing of concentrated oil-in-water emulsions in the transition flow regime, Chem. Eng. Res. Des, vol.79, issue.8, pp.943-948, 2001.

S. Caubet, Y. L. Guer, B. Grassl, K. E. Omari, and E. Normandin, A low-energy emulsification batch mixer for concentrated oil-in-water emulsions, AIChE J, vol.57, issue.1, pp.27-39, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00395299

R. Covis, C. Baravian, E. Marie, and A. Durand, Kinetics of formation of polysaccharidecovered micrometric oil droplets under mechanical agitation, Colloids Surf. A: Physicochem. Eng. Aspects, vol.466, pp.92-99, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01417332

R. Covis, E. Marie, A. Durand, and C. Baravian, Kinetics of formation of oil-in-water emulsions using in situ rheo-optical measurements?, AIChE J, vol.61, issue.1, pp.277-284, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01417335

S. W. Cui, Food Carbohydrates: Chemistry, Physical Properties, and Applications, 2005.

S. R. Derkach, Rheology of emulsions?, Adv. Colloid Interface Sci, vol.151, issue.1, pp.1-23, 2009.

D. Exerowa, G. Gotchev, T. Kolarov, K. Kristov, B. Levecke et al., Comparison of oil-in-water emulsion films produced using ABA or ABn copolymers?, Colloids Surf. A: Physicochem. Eng. Aspects, vol.335, issue.1, pp.50-54, 2009.

S. Fournanty, Y. L. Guer, K. E. Omari, and J. Dejean, Laminar flow emulsification process to control the viscosity reduction of heavy crude oils, J. Dispers. Sci. Technol, vol.29, issue.10, pp.1355-1366, 2008.

C. Gallegos and J. Franco, Rheology of food emulsions, Rheol. Ser, vol.8, p.118, 1999.

Z. Gao and A. Eisenberg, A model of micellization for block-copolymers in solutions, Macromolecules, vol.26, issue.26, pp.7353-7360, 1993.

K. Hyun, S. H. Kim, K. H. Ahn, and S. J. Lee, Large amplitude oscillatory shear as a way to classify the complex fluids, J. Non-Newton. Fluid Mech, vol.107, issue.1, pp.51-65, 2002.

Y. Kong, A. Nikolov, and D. Wasan, Emulsion stability in the presence of nonionic surfactant micelles: role of micellar ordering and Ostwald ripening, Ind. Eng. Chem. Res, vol.49, issue.11, pp.5299-5303, 2010.

P. Linse and T. A. Hatton, Mean-field lattice calculations of ethylene oxide and propylene oxide containing homopolymers and triblock copolymers at the air/water interface, Langmuir, vol.13, issue.15, pp.4066-4078, 1997.

K. Lissant, The geometry of high-internal-phase-ratio emulsions, J. Colloid Interface Sci, vol.22, issue.5, pp.462-468, 1966.

J. Ma, C. Guo, Y. Tang, J. Xiang, S. Chen et al., Micellization in aqueous solution of an ethylene oxide-propylene oxide triblock copolymer, investigated with 1 h NMR spectroscopy, pulsed-field gradient NMR, and NMR relaxation, J. Colloid Interface Sci, vol.312, issue.2, pp.390-396, 2007.

C. Mabille, F. Leal-calderon, J. Bibette, and V. Schmitt, Monodisperse fragmentation in emulsions: mechanisms and kinetics, vol.61, p.708, 2003.

J. Mata, P. Majhi, C. Guo, H. Liu, and P. Bahadur, Concentration, temperature, and saltinduced micellization of a triblock copolymer pluronic l64 in aqueous media, J. Colloid Interface Sci, vol.292, issue.2, pp.548-556, 2005.

M. G. Munoz, F. Monroy, F. Ortega, R. G. Rubio, and D. Langevin, Monolayers of symmetric triblock copolymers at the air-water interface. 1. Equilibrium properties, Langmuir, vol.16, issue.3, pp.1083-1093, 2000.

K. Nakashima, T. Anzai, and Y. Fujimoto, Fluorescence studies on the properties of a pluronic f68 micelle, vol.10, pp.658-661, 1994.

R. , Rheology of emulsions containing polymeric liquids, Encycl. Emuls. Technol, vol.4, p.93, 1996.

R. , Rheology of emulsions containing polymeric liquids, Encycl. Emuls. Technol, vol.4, 1996.

R. , Viscoelastic properties of polymer-thickened oil-in-water emulsions, Chem. Eng. Sci, vol.51, issue.12, pp.3299-3305, 1996.

E. Paruta-tuarez, P. Marchal, V. Sadtler, and L. Choplin, Analysis of the Princen and Kiss equation to model the storage modulus of highly concentrated emulsions, Ind. Eng. Chem. Res, vol.50, issue.17, pp.10359-10365, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00677074

A. Patist, J. R. Kanicky, P. K. Shukla, and D. O. Shah, Importance of micellar kinetics in relation to technological processes, J. Colloid Interface Sci, vol.245, issue.1, pp.1-15, 2002.

A. Perazzo, V. Preziosi, and S. Guido, Phase inversion emulsification: current understanding and applications, Adv. Colloid Interface Sci, vol.222, pp.581-599, 2015.

L. M. Pérez-mosqueda, J. Maldonado-valderrama, P. Ramírez, M. A. Cabrerizo-vílchez, J. Mu et al., Interfacial characterization of pluronic pe9400 at biocompatible (air-water and limonene-water) interfaces, Colloids Surf. B: Biointerfaces, vol.111, pp.171-178, 2013.

R. Pons, P. Erra, C. Solans, J. Ravey, and M. Stébé, Viscoelastic properties of gelemulsions: their relationship with structure and equilibrium properties, J. Phys. Chem, vol.97, issue.47, pp.12320-12324, 1993.

H. Princen, Highly concentrated emulsions. I. Cylindrical systems, J. Colloid Interface Sci, vol.71, issue.1, pp.55-66, 1979.

H. Princen, Rheology of foams and highly concentrated emulsions: I. Elastic properties and yield stress of a cylindrical model system, J. Colloid Interface Sci, vol.91, issue.1, pp.160-175, 1983.

P. Ramírez, J. Mu-noz, V. Fainerman, E. Aksenenko, N. Mucic et al., Dynamic interfacial tension of triblock copolymers solutions at the water-hexane interface, Colloids Surf. A: Physicochem. Eng. Aspects, vol.391, issue.1, pp.119-124, 2011.

P. Ramírez, A. Stocco, J. Mu-noz, and R. Miller, Interfacial rheology and conformations of triblock copolymers adsorbed onto the water-oil interface, J. Colloid Interface Sci, vol.378, issue.1, pp.135-143, 2012.

P. Ramírez, A. Stocco, J. Mu-noz, and R. Miller, Interfacial rheology and conformations of triblock copolymers adsorbed onto the water-oil interface, J. Colloid Interface Sci, vol.378, issue.1, pp.135-143, 2012.

H. Rehage, G. Ebert, and G. Platz, Hydrocarbon gels and their rheological properties, Abstracts of papers of the, vol.195, p.57, 1988.

G. Riess, Micellization of block copolymers, Prog. Polym. Sci, vol.28, issue.7, pp.1107-1170, 2003.

E. Rotureau, M. Leonard, E. Marie, E. Dellacherie, T. Camesano et al., From polymeric surfactants to colloidal systems (1): Amphiphilic dextrans for emulsion preparation, Colloids Surf. A: Physicochem. Eng. Aspects, vol.288, issue.1, pp.131-137, 2006.
URL : https://hal.archives-ouvertes.fr/hal-02066957

C. Rouzes, A. Durand, M. Leonard, and E. Dellacherie, Surface activity and emulsification properties of hydrophobically modified dextrans, J. Colloid Interface Sci, vol.253, issue.1, pp.217-223, 2002.

M. Sánchez, C. Valencia, J. Franco, and C. Gallegos, Wall slip phenomena in oil-in-water emulsions: effect of some structural parameters, J. Colloid Interface Sci, vol.241, issue.1, pp.226-232, 2001.

R. Sedev, Peo-brush at the liquid/gas interface, Colloids Surf. A: Physicochem. Eng. Aspects, vol.156, issue.1, pp.65-70, 1999.

R. Sedev, R. Steitz, and G. Findenegg, The structure of PEO-PPO-PEO triblock copolymers at the water/air interface, Phys. B: Condens. Matter, vol.315, issue.4, pp.267-272, 2002.

P. K. Sharma and S. R. Bhatia, Effect of anti-inflammatories on pluronic® f127: micellar assembly, gelation and partitioning, Int. J. Pharm, vol.278, issue.2, pp.361-377, 2004.

T. Svitova and C. Radke, Aot and pluronic f68 coadsorption at fluid/fluid interfaces: a continuous-flow tensiometry study, Ind. Eng. Chem. Res, vol.44, issue.5, pp.1129-1138, 2005.

T. F. Tadros, Applied Surfactants: Principles and Applications, 2006.

A. Torcello-gómez, M. Wulff-pérez, M. J. Gálvez-ruiz, A. Martín-rodríguez, M. Cabrerizo-vílchez et al., Block copolymers at interfaces: interactions with physiological media, Adv. Colloid Interface Sci, vol.206, pp.414-427, 2014.

J. Vieira, Z. Li, R. Thomas, and J. Penfold, Structure of triblock copolymers of ethylene oxide and propylene oxide at the air/water interface determined by neutron reflection, J. Phys. Chem. B, vol.106, issue.41, pp.10641-10648, 2002.

P. Walstra, Formation of Emulsions, 1983.

S. Wu, Chain structure and entanglement, J. Polym. Sci. B: Polym. Phys, vol.27, issue.4, pp.723-741, 1989.

B. Zhao, L. Zhu, W. Li, and B. Chen, Solubilization and biodegradation of phenanthrene in mixed anionic-nonionic surfactant solutions, Chemosphere, vol.58, issue.1, pp.33-40, 2005.

A. Aguilera-miguel, Colloids and Surfaces A, vol.550, pp.155-166, 2018.

. Lek-achenie, V. Gani, and . Venkatasubramanian, Genetic algorithms based camd, Computer Aided Molecular Design: Theory and Practice, vol.12, p.95, 2002.

H. Jinhyun, Y. Lee, and . Yeo, Controlled drug release from pharmaceutical nanocarriers, Chemical engineering science, vol.125, pp.75-84, 2015.

R. Jennifer, W. Weiser, and . Mark-saltzman, Controlled release for local delivery of drugs: barriers and models, Journal of Controlled Release, vol.190, pp.664-673, 2014.

A. Kowalczuk, R. Trzcinska, B. Trzebicka, A. Müller, C. Dworak et al., Loading of polymer nanocarriers: factors, mechanisms and applications, Progress in Polymer Science, vol.39, issue.1, pp.43-86, 2014.

N. Dan, Transport and release in nano-carriers for food applications, Journal of Food Engineering, vol.175, pp.136-144, 2016.

. Martien-a-cohen, . Stuart, T. S. Wilhelm, J. Huck, M. Genzer et al., Emerging applications of stimuli-responsive polymer materials, Nature materials, vol.9, issue.2, pp.101-113, 2010.

O. David and . Cooney, Effect of geometry on the dissolution of pharmaceutical tablets and other solids: surface detachment kinetics controlling, AIChE Journal, vol.18, issue.2, pp.446-449, 1972.

J. Takahara, K. Takayama, and T. Nagai, Multi-objective simultaneous optimization technique based on an artificial neural network in sustained release formulations, Journal of controlled release, vol.49, issue.1, pp.11-20, 1997.

J. Siepmann and . Siepmann, Mathematical modeling of drug delivery, International journal of pharmaceutics, vol.364, issue.2, pp.328-343, 2008.

J. Siepmann and F. Siepmann, Modeling of diffusion controlled drug delivery, Journal of Controlled Release, vol.161, issue.2, pp.351-362, 2012.

P. Colombo, R. Bettini, and . Peppas, Observation of swelling process and diffusion front position during swelling in hydroxypropyl methyl cellulose (hpmc) matrices containing a soluble drug, Journal of Controlled Release, vol.61, issue.1, pp.83-91, 1999.

W. Richard, . Korsmeyer, . Steven-r-lustig, and . Peppas, Solute and penetrant diffusion in swellable polymers. i. mathematical modeling, Journal of Polymer Science Part B: Polymer Physics, vol.24, issue.2, pp.395-408, 1986.

. Pi-lee, Diffusional release of a solute from a polymeric matrix-approximate analytical solutions, Journal of membrane science, vol.7, issue.3, pp.255-275, 1980.

J. Siepmann, N. Faisant, and J. Benoit, A new mathematical model quantifying drug release from bioerodible microparticles using monte carlo simulations, Pharmaceutical Research, vol.19, issue.12, pp.1885-1893, 2002.

D. Julian and M. , Advances in fabrication of emulsions with enhanced functionality using structural design principles, Current Opinion in Colloid & Interface Science, vol.17, issue.5, pp.235-245, 2012.

P. Fernando, P. M. Bernardo, and . Saraiva, A theoretical model for transdermal drug delivery from emulsions and its dependence upon formulation, Journal of pharmaceutical sciences, vol.97, issue.9, pp.3781-3809, 2008.

R. Farajzadeh, . Krastev, . Pacelli, and . Zitha, Foam film permeability: Theory and experiment, Advances in colloid and interface science, vol.137, issue.1, pp.27-44, 2008.

D. Constantinescu and J. Gmehling, Addendum to "further development of modified unifac (dortmund): Revision and extension 6, Journal of Chemical & Engineering Data, vol.62, issue.7, pp.2230-2230, 2017.

F. Barragán-aroche and E. Bazúa-rueda, Estrategias de convergencia para equilibrio líquido-líquido. el problema del" flash" negativo

L. Weber, Jchem base-chemaxon, 2008.

J. David, Y. Mcclements, and . Li, Structured emulsion-based delivery systems: Controlling the digestion and release of lipophilic food components, Advances in colloid and interface science, vol.159, issue.2, pp.213-228, 2010.

G. Halász, . Virág, . Gyenis, Z. Blickle, and . Csapó, Computer-aided generation of mathematical models of steady-state heat and mass transfer processes, Computers & Chemical Engineering, vol.3, issue.1-4, pp.519-521, 1979.

C. Wibowo and K. M. Ng, Product-centered processing: Manufacture of chemical-based consumer products, AIChE Journal, vol.48, issue.6, pp.1212-1230, 2002.

. Na-peppas, Analysis of fickian and non-fickian drug release from polymers, 1985.

H. Yuan, . Zhao, H. Michael, A. M. Abraham, and . Zissimos, Fast calculation of van der waals volume as a sum of atomic and bond contributions and its application to drug compounds, The Journal of organic chemistry, vol.68, issue.19, pp.7368-7373, 2003.

E. Bruce, J. M. Poling, . Prausnitz, P. John, and . O'connell, The properties of gases and liquids, Mcgraw-hill, vol.5, 2001.

J. Gmehling, J. Li, and M. Schiller, A modified unifac model. 2. present parameter matrix and results for different thermodynamic properties, Industrial & Engineering Chemistry Research, vol.32, issue.1, pp.178-193, 1993.

D. Constantinescu and J. Gmehling, Further development of modified unifac (dortmund): Revision and extension 6, Journal of Chemical & Engineering Data, vol.61, issue.8, pp.2738-2748, 2016.

J. Elliot, . Chikofsky, H. James, and . Cross, Reverse engineering and design recovery: A taxonomy, IEEE software, vol.7, issue.1, pp.13-17, 1990.

H. Bruneliere, J. Cabot, G. Dupé, and F. Madiot, Modisco: A model driven reverse engineering framework, Information and Software Technology, vol.56, issue.8, pp.1012-1032, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00972632

E. Eilam, Reversing: secrets of reverse engineering, 2011.

R. Costa, P. M. Gd-moggridge, and . Saraiva, Chemical product engineering: an emerging paradigm within chemical engineering, AIChE Journal, vol.52, issue.6, pp.1976-1986, 2006.

E. Favre, M. Marchal-heusler, and . Kind, Chemical product engineering: research and educational challenges, Chemical Engineering Research and Design, vol.80, issue.1, pp.65-74, 2002.

R. Gani, K. Dam-johansen, and K. M. Ng, Chemical product design: A brief overview. Chemical product design: toward a perspective through case studies, 2006.

M. Guennadi, . Ostrovsky, E. K. Luke, M. Achenie, and . Sinha, On the solution of mixed-integer nonlinear programming models for computer aided molecular design, Computers & chemistry, vol.26, issue.6, pp.645-660, 2002.

J. Abildskov and G. M. Kontogeorgis, Chemical product design: A new challenge of applied thermodynamics, Chemical Engineering Research and Design, vol.82, issue.11, pp.1505-1510, 2004.

. Jm-prausnitz, Thermodynamics and the other chemical engineering sciences: old models for new chemical products and processes, Fluid phase equilibria, vol.158, pp.95-111, 1999.

P. Fernando, P. M. Bernardo, and . Saraiva, Value of information analysis in product/process design, Computer Aided Chemical Engineering, vol.18, pp.151-156, 2004.

. Ignacio-e-grossmann, Challenges in the new millennium: product discovery and design, enterprise and supply chain optimization, global life cycle assessment, Computers & Chemical Engineering, vol.29, issue.1, pp.29-39, 2004.

G. Blau, B. Mehta, S. Bose, J. Pekny, G. Sinclair et al., Risk management in the development of new products in highly regulated industries, Computers & Chemical Engineering, vol.24, issue.2-7, pp.659-664, 2000.

T. Christos, I. E. Maravelias, and . Grossmann, Simultaneous planning for new product development and batch manufacturing facilities, Industrial & engineering chemistry research, vol.40, issue.26, pp.6147-6164, 2001.

D. Subramanian, F. Joseph, . Pekny, V. Gintaras, G. E. Reklaitis et al., Simulation-optimization framework for stochastic optimization of r&d pipeline management, AIChE Journal, vol.49, issue.1, pp.96-112, 2003.

A. Kogan and N. Garti, Microemulsions as transdermal drug delivery vehicles, Advances in colloid and interface science, vol.123, pp.369-385, 2006.

K. Park, Controlled drug delivery systems: past forward and future back, Journal of Controlled Release, vol.190, pp.3-8, 2014.

A. Ronald and M. Siegel, Overview of controlled release mechanisms, Fundamentals and Applications of Controlled Release Drug Delivery, pp.19-43

. Springer, , 2012.

H. Sara-a-abouelmagd, Y. Hyun, and . Yeo, Extracellularly activatable nanocarriers for drug delivery to tumors, Expert opinion on drug delivery, vol.11, issue.10, pp.1601-1618, 2014.

C. Miles-c-braithwaite, . Tyagi, K. Lomas, P. Tomar, . Kumar et al., Nutraceutical-based therapeutics and formulation strategies augmenting their efficiency to complement modern medicine: An overview, Journal of Functional Foods, vol.6, pp.82-99, 2014.

E. Dickinson and M. E. Leser, Food colloids: self-assembly and material science, Royal Society of chemistry, vol.308, 2007.

C. N. Inteaz-alli, F. Mulligan-bernard, S. Gibbs, and . Kermasha, Encapsulation in the food industry: a review, International journal of food sciences and nutrition, vol.50, issue.3, pp.213-224, 1999.

N. John, J. E. Coupland, and . Hayes, Physical approaches to masking bitter taste: lessons from food and pharmaceuticals, Pharmaceutical research, vol.31, issue.11, pp.2921-2939, 2014.

M. Elsabahy and K. L. Wooley, Design of polymeric nanoparticles for biomedical delivery applications, Chemical Society Reviews, vol.41, issue.7, pp.2545-2561, 2012.

H. Wei, R. Zhuo, and X. Zhang, Design and development of polymeric micelles with cleavable links for intracellular drug delivery, Progress in polymer Science, vol.38, issue.3, pp.503-535, 2013.

A. Jeffrey, A. Hubbell, and . Chilkoti, Nanomaterials for drug delivery, Science, vol.337, issue.6092, pp.303-305, 2012.

R. Cheng, F. Meng, and C. Deng, Dual and multi-stimuli responsive polymeric nanoparticles for programmed site-specific drug delivery, Biomaterials, vol.34, issue.14, pp.3647-3657, 2013.

J. Tang, Y. Sheng, H. Hu, and Y. Shen, Macromolecular mri contrast agents: structures, properties and applications, Progress in Polymer Science, vol.38, pp.462-502, 2013.

L. Tennyson, C. Doane, and . Burda, The unique role of nanoparticles in nanomedicine: imaging, drug delivery and therapy, Chemical Society Reviews, vol.41, issue.7, pp.2885-2911, 2012.

M. Joaquim, A. Oliveira, N. Salgado, J. F. Sousa, R. Mano et al., Dendrimers and derivatives as a potential therapeutic tool in regenerative medicine strategies-a review, Progress in Polymer Science, vol.35, issue.9, pp.1163-1194, 2010.

J. Park, S. Lee, J. Kim, K. Park, K. Kim et al., Polymeric nanomedicine for cancer therapy, Progress in Polymer Science, vol.33, issue.1, pp.113-137, 2008.

F. M-talha-gokmen and . Prez, Porous polymer particles-a comprehensive guide to synthesis, characterization, functionalization and applications. Progress in polymer science, vol.37, pp.365-405, 2012.

M. Motornov, Y. Roiter, I. Tokarev, and S. Minko, Stimuli-responsive nanoparticles, nanogels and capsules for integrated multifunctional intelligent systems. Progress in polymer science, vol.35, pp.174-211, 2010.

R. Langer and N. Peppas, Chemical and physical structure of polymers as carriers for controlled release of bioactive agents: a review, Journal of Macromolecular Science-Reviews in Macromolecular Chemistry and Physics, vol.23, issue.1, pp.61-126, 1983.

S. Herrlich, S. Spieth, S. Messner, and R. Zengerle, Osmotic micropumps for drug delivery, Advanced drug delivery reviews, vol.64, pp.1617-1627, 2012.

. Na-peppas, W. Bures, H. Leobandung, and . Ichikawa, Hydrogels in pharmaceutical formulations, European journal of pharmaceutics and biopharmaceutics, vol.50, issue.1, pp.27-46, 2000.

C. Chien, A. T. Lin, and . Metters, Hydrogels in controlled release formulations: network design and mathematical modeling, Advanced drug delivery reviews, vol.58, pp.1379-1408, 2006.

I. Ping and . Lee, Novel approach to zero-order drug delivery via immobilized nonuniform drug distribution in glassy hydrogels, Journal of pharmaceutical sciences, vol.73, issue.10, pp.1344-1347, 1984.

S. Kaity, J. Isaac, and A. Ghosh, Interpenetrating polymer network of locust bean gum-poly (vinyl alcohol) for controlled release drug delivery. Carbohydrate polymers, vol.94, pp.456-467, 2013.

H. Soo-hyeon-lee, Y. Mok, T. Lee, and . Park, Self-assembled sirna-plga conjugate micelles for gene silencing, Journal of controlled release, vol.152, issue.1, pp.152-158, 2011.

M. Prabaharan, J. Jamison, S. Grailer, . Pilla, A. Douglas et al., Amphiphilic multi-arm-block copolymer conjugated with doxorubicin via phsensitive hydrazone bond for tumor-targeted drug delivery, Biomaterials, vol.30, issue.29, pp.5757-5766, 2009.

S. Hyuk, T. Yoo, and . Park, Biodegradable polymeric micelles composed of doxorubicin conjugated plga-peg block copolymer, Journal of controlled Release, vol.70, issue.1, pp.63-70, 2001.

L. Friederike-von-burkersroda, A. Schedl, and . Göpferich, Why degradable polymers undergo surface erosion or bulk erosion, Biomaterials, vol.23, issue.21, pp.4221-4231, 2002.

W. Lee and . Chu, Preparation and degradation behavior of polyanhydrides nanoparticles, Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol.84, issue.1, pp.138-146, 2008.

S. Fredenberg, M. Wahlgren, M. Reslow, and A. Axelsson, The mechanisms of drug release in poly (lactic-co-glycolic acid)-based drug delivery systems-a review, International journal of pharmaceutics, vol.415, issue.1, pp.34-52, 2011.

J. Kope?ek, Controlled biodegradability of polymers-a key to drug delivery systems, Biomaterials, vol.5, issue.1, pp.19-25, 1984.

H. Scott, M. V. Medina, G. Chevliakov, Y. Tiruchinapally, . Yuksel-durmaz et al., Enzyme-activated nanoconjugates for tunable release of doxorubicin in hepatic cancer cells, Biomaterials, vol.34, issue.19, pp.4655-4666, 2013.

J. Kyung-hyun-min, S. M. Kim, H. Bae, M. S. Shin, S. Kim et al., Tumoral acidic ph-responsive mpeg-poly (? -amino ester) polymeric micelles for cancer targeting therapy, Journal of Controlled Release, vol.144, issue.2, pp.259-266, 2010.

C. Chang, H. Wei, C. Quan, Y. Li, J. Liu et al., Fabrication of thermosensitive pcl-pnipaam-pcl triblock copolymeric micelles for drug delivery, Journal of Polymer Science Part A: Polymer Chemistry, vol.46, issue.9, pp.3048-3057, 2008.

J. Siepmann and N. A. Peppas, Modeling of drug release from delivery systems based on hydroxypropyl methylcellulose (hpmc), vol.48, pp.139-157, 2001.

J. Siepmann and . Göpferich, Mathematical modeling of bioerodible, polymeric drug delivery systems, Advanced drug delivery reviews, vol.48, issue.2, pp.229-247, 2001.

L. Y. Davis-yohanes-arifin, C. Lee, and . Wang, Mathematical modeling and simulation of drug release from microspheres: implications to drug delivery systems, Advanced drug delivery reviews, vol.58, issue.12, pp.1274-1325, 2006.

T. Higuchi, Physical chemical analysis of percutaneous absorption process from creams and ointments, J. Soc. Cosmet. Chem, vol.11, pp.85-97, 1960.

T. Higuchi, Rate of release of medicaments from ointment bases containing drugs in suspension, Journal of pharmaceutical sciences, vol.50, issue.10, pp.874-875, 1961.

J. Siepmann, . Ainaoui, R. Vergnaud, and . Bodmeier, Calculation of the dimensions of drug-polymer devices based on diffusion parameters, Journal of pharmaceutical sciences, vol.87, issue.7, pp.827-832, 1998.

B. Narasimhan, Mathematical models describing polymer dissolution: consequences for drug delivery, Advanced Drug Delivery Reviews, vol.48, issue.2, pp.195-210, 2001.

G. Frenning and M. Strømme, Drug release modeled by dissolution, diffusion, and immobilization, International journal of pharmaceutics, vol.250, issue.1, pp.137-145, 2003.

V. Lemaire, P. Belair, and . Hildgen, Structural modeling of drug release from biodegradable porous matrices based on a combined diffusion/erosion process. International journal of pharmaceutics, vol.258, pp.95-107, 2003.

Y. Zhou and . Wu, Modeling and analysis of dispersed-drug release into a finite medium from sphere ensembles with a boundary layer, Journal of controlled release, vol.90, issue.1, pp.23-36, 2003.

G. Frenning, U. Brohede, and M. Strømme, Finite element analysis of the release of slowly dissolving drugs from cylindrical matrix systems, Journal of controlled release, vol.107, issue.2, pp.320-329, 2005.

C. Raman, C. Berkland, K. Kyekyoon, D. W. Kim, and . Pack, Modeling small-molecule release from plg microspheres: effects of polymer degradation and nonuniform drug distribution, Journal of Controlled Release, vol.103, issue.1, pp.149-158, 2005.

L. Philip, . Ritger, A. Nikolaos, and . Peppas, A simple equation for description of solute release i. fickian and non-fickian release from non-swellable devices in the form of slabs, spheres, cylinders or discs, Journal of controlled release, vol.5, issue.1, pp.23-36, 1987.

L. Philip, . Ritger, A. Nikolaos, and . Peppas, A simple equation for description of solute release ii. fickian and anomalous release from swellable devices, Journal of controlled release, vol.5, issue.1, pp.37-42, 1987.

. Hb-hopfenberg, Controlled release from erodible slabs, cylinders, and spheres, 1976.

Y. Chen, W. Troy, . Mccall, R. Anand, M. Baichwal et al., The application of an artificial neural network and pharmacokinetic simulations in the design of controlled-release dosage forms, Journal of controlled release, vol.59, issue.1, pp.33-41, 1999.

S. Ibri?, M. Jovanovi?, Z. Djuri?, J. Paroj?i?, and L. Solomun, The application of generalized regression neural network in the modeling and optimization of aspirin extended release tablets with eudragit® rs po as matrix substance, Journal of Controlled Release, vol.82, issue.2, pp.213-222, 2002.

A. Ghaffari, . Abdollahi, . Mr-khoshayand, . Soltani-bozchalooi, M. Dadgar et al., Performance comparison of neural network training algorithms in modeling of bimodal drug delivery, International journal of pharmaceutics, vol.327, issue.1, pp.126-138, 2006.

Q. Shao, C. Raymond, P. Rowe, and . York, Comparison of neurofuzzy logic and neural networks in modelling experimental data of an immediate release tablet formulation, European journal of pharmaceutical sciences, vol.28, issue.5, pp.394-404, 2006.

E. Cauchetier, H. Deniau, . Fessi, M. Astier, and . Paul, Atovaquone-loaded nanocapsules: influence of the nature of the polymer on their in vitro characteristics, International journal of pharmaceutics, vol.250, issue.1, pp.273-281, 2003.

J. Crank, The mathematics of diffusion, 1979.

R. W. Baker, Controlled release of biologically active agents, 1987.

P. Borgquist and G. Zackrisson, Simulation and parametric study of a film-coated controlled-release pharmaceutical, Journal of controlled release, vol.80, issue.1, pp.229-245, 2002.

J. Vergnaud, Controlled drug release of oral dosage forms, 1993.

T. Higuchi, Mechanism of sustained-action medication. theoretical analysis of rate of release of solid drugs dispersed in solid matrices, Journal of pharmaceutical sciences, vol.52, issue.12, pp.1145-1149, 1963.

. Liang-tseng-fan, K. Satish, and . Singh, Controlled release: A quantitative treatment, vol.13, 2012.

E. Doelker, Water-swollen cellulose derivatives in pharmacy, Hydrogels in medicine and pharmacy, vol.2, pp.115-160, 1987.

H. Fujita, Diffusion in polymer-diluent systems, Fortschritte Der Hochpolymeren-Forschung, pp.1-47, 1961.

T. C. Robert, . Ju, M. V. Phillip-r-nixon, D. Patel, and . Tong, Drug release from hydrophilic matrices. 2. a mathematical model based on the polymer disentanglement concentration and the diffusion layer, Journal of pharmaceutical sciences, vol.84, issue.12, pp.1464-1477, 1995.

J. Siepmann and N. A. Peppas, Hydrophilic matrices for controlled drug delivery: an improved mathematical model to predict the resulting drug release kinetics (the "sequential layer" model), Pharmaceutical Research, vol.17, issue.10, pp.1290-1298, 2000.

B. Narasimhan, A. Nikolaos, and . Peppas, Disentanglement and reptation during dissolution of rubbery polymers, Journal of Polymer Science-B-Polymer Physics Edition, vol.34, issue.5, pp.947-962, 1996.

K. Zygourakis and P. A. Markenscoff, Computer-aided design of bioerodible devices with optimal release characteristics: a cellular automata approach, Biomaterials, vol.17, issue.2, pp.125-135, 1996.

N. Faisant, . Siepmann, J. P. Richard, and . Benoit, Mathematical modeling of drug release from bioerodible microparticles: effect of gamma-irradiation, European Journal of Pharmaceutics and Biopharmaceutics, vol.56, issue.2, pp.271-279, 2003.

J. Bézivin, On the unification power of models. Software and Systems Modeling, vol.4, pp.171-188, 2005.

E. Conte, R. Gani, and K. M. Ng, Design of formulated products: a systematic methodology, AIChE journal, vol.57, issue.9, pp.2431-2449, 2011.

M. Jens, T. Sørensen, P. Magnussen, A. Rasmussen, and . Fredenslund, Liquid-liquid equilibrium data: Their retrieval, correlation and prediction part ii: Correlation, Fluid Phase Equilibria, vol.3, issue.1, pp.47-82, 1979.

M. Llinàs, G. Calderó, M. García-celma, A. Patti, and C. Solans, New insights on the mechanisms of drug release from highly concentrated emulsions, Journal of colloid and interface science, vol.394, pp.337-345, 2013.

G. Calderó, M. Llinàs, M. García-celma, and C. Solans, Studies on controlled release of hydrophilic drugs from w/o high internal phase ratio emulsions, Journal of pharmaceutical sciences, vol.99, issue.2, pp.701-711, 2010.

H. Maekawa, J. Esquena, S. Bishop, C. Solans, and B. F. Chmelka, Meso/macroporous inorganic oxide monoliths from polymer foams. Advanced Materials, vol.15, pp.591-596, 2003.

L. Espelt, P. Clapés, J. Esquena, A. Manich, and C. Solans, Enzymatic carbon-carbon bond formation in water-in-oil highly concentrated emulsions (gel emulsions), Langmuir, vol.19, issue.4, pp.1337-1346, 2003.

A. Nina-s-nielsen, A. S. Petersen, M. Meyer, C. Timm-heinrich, and . Jacobsen, Effects of lactoferrin, phytic acid, and edta on oxidation in two food emulsions enriched with long-chain polyunsaturated fatty acids, Journal of agricultural and food chemistry, vol.52, issue.25, pp.7690-7699, 2004.

. Ap-guimarães, . Das-maia, . Araújo, H. B. Cl-cavalcante, and . De-sant'ana, Destabilization and recuperability of oil used in the formulation of concentrated emulsions and cutting fluids, Chemical and Biochemical Engineering Quarterly, vol.24, issue.1, pp.43-49, 2010.

C. Malmborg, D. Topgaard, and O. Söderman, Nmr diffusometry and the short gradient pulse limit approximation, Journal of Magnetic Resonance, vol.169, issue.1, pp.85-91, 2004.

J. Ashworth, E. J. Wurtmann, and N. S. Baliga, Reverse engineering systems models of regulation: discovery, prediction and mechanisms, Current opinion in biotechnology, vol.23, issue.4, pp.598-603, 2012.

C. Edward-lansing, Diffusion: mass transfer in fluid systems, 2009.

. Rp-borwankar, . Chan, . Dt-wasan, . Kurzeja, . Gu et al., Analysis of the effect of internal phase leakage on liquid membrane separations, AIChE journal, vol.34, issue.5, pp.753-762, 1988.

L. R. , D. Young, and K. A. Dill, Solute partitioning into lipid bilayer membranes, Biochemistry, vol.27, issue.14, pp.5281-5289, 1988.

S. Mitragotri, E. Mark, D. Johnson, R. Blankschtein, and . Langer, An analysis of the size selectivity of solute partitioning, diffusion, and permeation across lipid bilayers, Biophysical journal, vol.77, issue.3, pp.1268-1283, 1999.

T. Xiang and . Bradley-d-anderson, Permeability of acetic acid across gel and liquid-crystalline lipid bilayers conforms to free-surface-area theory, Biophysical journal, vol.72, issue.1, pp.223-237, 1997.

A. Ghanem, A. P. Higuchi, and . Simonelli, Interfacial barriers in interphase transport: Retardation of the transport of diethylphthalate across the hexadecanewater interface by an adsorbed gelatin film, Journal of pharmaceutical sciences, vol.58, issue.2, pp.165-174, 1969.

. Stephanie-r-dungan, H. Beverly, N. I. Tai, and . Gerhardt, Transport mechanisms in the micellar solubilization of alkanes in oil-in-water emulsions, Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.216, issue.1, pp.149-166, 2003.

C. R. Wilke and P. Chang, Correlation of diffusion coefficients in dilute solutions, AIChE Journal, vol.1, issue.2, pp.264-270, 1955.

J. Lyklema, Fundamentals of interface and colloid science: soft colloids, vol.5, 2005.

A. Fredenslund, L. Russell, J. M. Jones, and . Prausnitz, Group-contribution estimation of activity coefficients in nonideal liquid mixtures, AIChE Journal, vol.21, issue.6, pp.1086-1099, 1975.

A. Bondi, Physical properties of molecular liquids, crystals and glasses, 1968.

K. Henrik, P. Hansen, A. Rasmussen, M. Fredenslund, J. Schiller et al., Vapor-liquid equilibria by unifac group contribution. 5. revision and extension, Industrial & Engineering Chemistry Research, vol.30, issue.10, pp.2352-2355, 1991.

J. Josef-p-novák, J. Matou?, and . Pick, Liquid-liquid equilibria, vol.7, 1987.

Z. Lei, B. Chen, C. Li, and H. Liu, Predictive molecular thermodynamic models for liquid solvents, solid salts, polymers, and ionic liquids, Chemical reviews, vol.108, issue.4, pp.1419-1455, 2008.

. Kikic, P. Alessi, A. Rasmussen, and . Fredenslund, On the combinatorial part of the unifac and uniquac models, The Canadian Journal of Chemical Engineering, vol.58, issue.2, pp.253-258, 1980.

R. Eugene, C. Thomas, and . Eckert, Prediction of limiting activity coefficients by a modified separation of cohesive energy density model and unifac. Industrial & Engineering Chemistry Process Design and Development, vol.23, pp.194-209, 1984.

J. Lohmann, R. Joh, and J. Gmehling, From unifac to modified unifac (dortmund), Industrial & engineering chemistry research, vol.40, issue.3, pp.957-964, 2001.

J. Gmehling, J. Lohmann, A. Jakob, J. Li, and R. Joh, A modified unifac (dortmund) model. 3. revision and extension, Industrial & engineering chemistry research, vol.37, issue.12, pp.4876-4882, 1998.

J. Gmehling, R. Wittig, J. Lohmann, and R. Joh, A modified unifac (dortmund) model. 4. revision and extension, Industrial & engineering chemistry research, vol.41, issue.6, pp.1678-1688, 2002.

A. Jakob, H. Grensemann, J. Lohmann, and J. Gmehling, Further development of modified unifac (dortmund): revision and extension 5, Industrial & engineering chemistry research, vol.45, issue.23, pp.7924-7933, 2006.

A. Zuend, H. John, and . Seinfeld, A practical method for the calculation of liquid-liquid equilibria in multicomponent organic-water-electrolyte systems using physicochemical constraints, Fluid Phase Equilibria, vol.337, pp.201-213, 2013.

E. Lee, A. C. Baker, . Pierce, D. Kraemer, and . Luks, Gibbs energy analysis of phase equilibria, Society of Petroleum Engineers Journal, vol.22, issue.05, pp.731-742, 1982.

. Hh-rachford and . Rice, Procedure for use of electronic digital computers in calculating flash vaporization hydrocarbon equilibrium, Journal of Petroleum Technology, vol.4, issue.10, pp.19-22, 1952.

H. Curtis, M. Whitson, and . Michelsen, The negative flash. Fluid Phase Equilibria, vol.53, pp.51-71, 1989.

M. John and . Prausnitz, Computer calculations for multicomponent vapor-liquid and liquid-liquid equilibria, 1980.

V. Consonni, R. Todeschini, and M. Pavan, Structure/response correlations and similarity/diversity analysis by getaway descriptors. 1. theory of the novel 3d molecular descriptors, Journal of Chemical Information and Computer Sciences, vol.42, issue.3, pp.682-692, 2002.

J. Bruce and I. , Viscosity of binary liquid mixtures: a survey of mixture equations, 1977.

Y. Gaston-bonhomme, P. Petrino, and J. L. Chevalier, Unifac-visco group contribution method for predicting kinematic viscosity: extension and temperature dependence, Chemical engineering science, vol.49, issue.11, pp.1799-1806, 1994.

. Jl-chevalier, Y. Petrino, and . Gaston-bonhomme, Estimation method for the kinematic viscosity of a liquid-phase mixture, Chemical engineering science, vol.43, issue.6, pp.1303-1309, 1988.

. Mt-tyn and . Calus, Estimating liquid molal volume, Processing, vol.21, issue.4, pp.16-17, 1975.

L. Aksel and M. Lydersen, Engineering Experiment Station. Estimation of critical properties of organic compounds by the method of group contributions, 1955.

G. Kevin and . Joback, A unified approach to physical property estimation using multivariate statistical techniques, 1984.

G. Kevin, R. Joback, and . Reid, Estimation of pure-component properties from group-contributions, Chemical Engineering Communications, vol.57, issue.1-6, pp.233-243, 1987.

G. Charalambos, . Varelas, G. David, . Dixon, and . Steiner, Mathematical model of mass transport through dispersed-phase polymer networks, AIChE Journal, vol.41, issue.4, pp.805-811, 1995.

G. Charalambos, . Varelas, G. David, . Dixon, and . Steiner, Zero-order release from biphasic polymer hydrogels, Journal of controlled release, vol.34, issue.3, pp.185-192, 1995.

M. Grassi, G. Grassi, R. Lapasin, and I. Colombo, Understanding drug release and absorption mechanisms: A physical and mathematical approach, 2006.

T. Jens and . Carstensen, Modeling and data treatment in the pharmaceutical sciences, 1996.

P. Freguglia, Modelli matematici nelle scienze biologiche, 1998.

R. Gani, V. Lek-achenie, and . Venkatasubramanian, Introduction to camd, 2003.

A. Renata-m-d?bowska, I. Kaszuba, A. Michalak, C. Dzwiga?owska, E. Cie?ci?ska et al., Evaluation of the efficacy and tolerability of mandelic acid-containing cosmetic formulations for acne skin care, Dermatology Review/Przeglad Dermatologiczny, vol.102, issue.3, 2015.

H. Frank, N. M. Clarke, and . Cahoon, Ionization constants by curve fitting: Determination of partition and distribution coefficients of acids and bases and their ions, Journal of pharmaceutical sciences, vol.76, issue.8, pp.611-620, 1987.

G. Calderó, C. García-celma, R. Solans, and . Pons, Effect of ph on mandelic acid diffusion in water in oil highly concentrated emulsions (gel-emulsions), Langmuir, vol.16, issue.4, pp.1668-1674, 2000.

S. David, C. Wishart, A. C. Knox, R. Guo, N. Eisner et al., Hmdb: a knowledgebase for the human metabolome, Nucleic acids research, vol.37, issue.suppl_1, pp.603-610, 2008.

P. Michael, M. F. Aronson, and . Petko, Highly concentrated water-in-oil emulsions: Influence of electrolyte on their properties and stability, Journal of colloid and interface science, vol.159, issue.1, pp.134-149, 1993.

A. Azeem, M. Zeenat-iqbal-khan, . Aqil, J. Farhan, R. Ahmad et al., Microemulsions as a surrogate carrier for dermal drug delivery. Drug development and industrial pharmacy, vol.35, pp.525-547, 2009.

, Federal register notice; voluntary children's chemical evaluation program

M. Myristate, Final report on the safety assessment of myristyl myristate and isopropyl myristate, J Am Coll Toxicol, vol.1, pp.55-80, 1982.

V. Mahesh, F. Patel, and . Chen, Solid carriers for improved delivery of active ingredients in pharmaceutical compositions, US Patent, vol.6, p.363, 2001.

C. Hinton, Alkoxylated nonionic surfactants. chapter: 3. The Chemistry and Manufacture of Cosmetics, vol.3, pp.15-27, 2002.

A. Saltelli, M. Ratto, T. Andres, F. Campolongo, J. Cariboni et al., Global sensitivity analysis: the primer, 2008.

J. David and . Pannell, Sensitivity analysis of normative economic models: theoretical framework and practical strategies, Agricultural economics, vol.16, issue.2, pp.139-152, 1997.

A. Bahremand and F. Smedt, Distributed hydrological modeling and sensitivity analysis in torysa watershed, slovakia, Water Resources Management, vol.22, issue.3, pp.393-408, 2008.

C. Mary, D. Hill, M. Kavetski, M. Clark, M. Ye et al., Practical use of computationally frugal model analysis methods, Groundwater, vol.54, issue.2, pp.159-170, 2016.

C. Mary, C. R. Hill, and . Tiedeman, Effective groundwater model calibration: with analysis of data, sensitivities, predictions, and uncertainty, 2006.

J. Michael, G. Berry, and . Linoff, Data mining techniques: for marketing, sales, and customer support, 1997.

W. Donald and . Marquardt, An algorithm for least-squares estimation of nonlinear parameters, Journal of the society for Industrial and Applied Mathematics, vol.11, issue.2, pp.431-441, 1963.

J. Jorge and . Moré, The levenberg-marquardt algorithm: implementation and theory, Numerical analysis, pp.105-116, 1978.

K. Tapash, . Ghosh, R. Bhaskara, and . Jasti, Theory and practice of contemporary pharmaceutics, 2004.

L. Wilkinson, Revising the pareto chart, The American Statistician, vol.60, issue.4, pp.332-334, 2006.

J. Salager, J. M. Re-antón, J. Anderez, and . Aubry, Formulation des micro-émulsions par la méthode hld, vol.157, 2001.

S. Ariyaprakai and . Stephanie-r-dungan, Contribution of molecular pathways in the micellar solubilization of monodisperse emulsion droplets, Langmuir, vol.24, issue.7, pp.3061-3069, 2008.

E. Paruta-tuarez, H. Fersadou, V. Sadtler, P. Marchal, L. Choplin et al., Highly concentrated emulsions: 1. average drop size determination by analysis of incoherent polarized steady light transport, Journal of colloid and interface science, vol.346, issue.1, pp.136-142, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00611550

J. Wyatt, S. R. Musnicki, R. Dungan, and . Phillips, Multicomponent diffusion in solute-containing micelle and microemulsion solutions, Langmuir, vol.30, issue.37, pp.11019-11030, 2014.

H. Harry and . Harman, Modern factor analysis

, ? m =dispersed phase mass fraction [adim.]; r o/s =oil/surfactant ratio m oil /m sur f

D. Droplet and . Diameter,

, G'=storage moduli before or after experiment

, Predicted and experimental release curves of SPAN 80 systems. Part (1/2). (a) No

, Predicted and experimental release curves of SPAN 80 systems. Part (2/2). 2788 9, vol.1, pp.54-65

, NOTES -D=dodecane

, ? m =dispersed phase mass fraction [adim.]; r o/s =oil/surfactant ratio m oil /m sur f

D. Droplet and . Diameter,

, G'=storage moduli before or after experiment

, Predicted and experimental release curves of PGPR systems

, Predicted and experimental release curves of PGPR systems. Part (2/2)

, NOTES -D=dodecane; H=hexadecane; M=myristate; P=palmitate

, ? m =dispersed phase mass fraction [adim.]; r o/s =oil/surfactant ratio m oil /m sur f

D. Droplet and . Diameter,

, G'=storage moduli before or after experiment

, Predicted and experimental release curves of BRIJ 93 systems