Quelques problèmes de stabilité et de bifurcation des solides visqueux, 1999. ,
Investigation and comparative analysis of plastic instability criteria: application to forming limit diagrams, International Journal Advanced Manufacturing Technology, vol.71, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01226823
Bifurcation analysis versus maximum force criteria in formability limit assessment of stretched metal sheets, International Journal of Applied Mechanics, vol.6, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01199864
On the coupling of anisotropic damage and plasticity models for ductile materials, International Journal of Solids and Structures, vol.40, pp.2611-2643, 2003. ,
Modélisation théorique et numérique des critères d'instabilité plastique. Application à la prédiction des phénomènes de striction et de localisation lors d'opérations de mise en forme par emboutissage, 2011. ,
A mathematical representation of the multiaxial Bauschinger effect, 1966. ,
Détermination théorique et expérimentale des courbes limites de formage en contraintes, 1990. ,
Determination and use of the forming limit stress diagrams in sheet metal forming, Journal of Materials Processing Technology, vol.53, pp.47-56, 1995. ,
Determination of an intrinsic forming limit stress diagram for isotropic metal sheets, Proceedings of the 12th Biennial Congress IDDRG, pp.61-71, 1982. ,
DOI : 10.1016/s0007-8506(07)62584-0
Computer Aided Measurement of Grid Network Deformation, for the Determination of Forming Limit Diagrams, CIRP Annals, vol.33, pp.61403-61409, 1984. ,
Ductile damage prediction in sheet and bulk metal forming, Comptes Rendus Mécanique, vol.344, 2016. ,
DOI : 10.1016/j.crme.2015.11.006
URL : https://doi.org/10.1016/j.crme.2015.11.006
On non-associative anisotropic finite plasticity fully coupled with isotropic ductile damage for metal forming, International Journal of Plasticity, vol.26, pp.1541-1575, 2010. ,
DOI : 10.1016/j.ijplas.2010.01.008
Modeling of the induced plastic anisotropy fully coupled with ductile damage under finite strains, International Journal of Solids and Structures, vol.108, pp.49-62, 2017. ,
Sheet metal forming processes, 2010. ,
A new yield criterion for orthotropic sheet metals 98 under plane-stress conditions, Proceedings of the 7th Conference 'TPR2000, pp.217-224, 2000. ,
DOI : 10.1016/s0020-7403(03)00139-5
Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions, International Journal of Mechanical Sciences, vol.45, pp.797-811, 2003. ,
DOI : 10.1016/s0020-7403(03)00139-5
Yielding description for solution strengthened aluminum alloys, International Journal of Plasticity, vol.13, pp.80005-80013, 1997. ,
DOI : 10.1016/s0749-6419(97)80005-8
Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions, International Journal of Plasticity, vol.5, pp.90019-90022, 1989. ,
Plane stress yield function for aluminum alloy sheets-part 1: theory, International Journal of Plasticity, vol.19, pp.19-19, 2003. ,
DOI : 10.1016/s0749-6419(02)00019-0
A six-component yield function for anisotropic materials, International Journal of Plasticity, vol.7, issue.91, p.90052, 1991. ,
DOI : 10.1016/0749-6419(91)90052-z
Yield function development for aluminum alloy sheets, Journal of the Mechanics and Physics of Solids, vol.45, 1997. ,
DOI : 10.1016/s0022-5096(97)00034-3
Plastic potentials for anisotropic porous solids, European Journal of Mechanics -A/Solids, vol.20, 2001. ,
DOI : 10.1016/s0997-7538(01)01147-0
On smooth bifurcations in non-associative elastoplasticity, Journal of the Mechanics and Physics of Solids, vol.44, pp.1337-1351, 1996. ,
Uniqueness and localization-I. Associative and nonassociative elastoplasticity, International Journal of Solids and Structures, vol.28, 1991. ,
Loss of strong ellipticity in non-associative elastoplasticity, Journal of the Mechanics and Physics of Solids, vol.40, pp.1313-1331, 1992. ,
DOI : 10.1016/0022-5096(92)90017-v
Identification and measurement of ductile damage parameters, Journal of Strain Analysis for Engineering Design, vol.34, pp.463-478, 1999. ,
DOI : 10.1243/0309324991513894
Ductile damage parameters identification for cold metal forming applications, The 14th International Esaform Conference on Material Forming: ESAFORM 2011, pp.47-52, 2011. ,
DOI : 10.1063/1.3589490
URL : https://hal.archives-ouvertes.fr/hal-00590272
Computational prediction of the localized necking in sheet forming based on microstructural material aspects, Computational Materials Science, vol.11, pp.45-64, 1998. ,
Prediction of necking in thin sheet metals using an elastic-plastic model coupled with ductile damage and bifurcation criteria, International Journal of Damage Mechanics, 2017. ,
Investigation of ductility limits based on bifurcation theory coupled with continuum damage mechanics, Materials & Design, vol.90, pp.969-978, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01515196
simplified technique to determine the FLD at onset of necking, Centre for Research in Metallurgy, vol.33, pp.53-63, 1972. ,
An anisotropic ductile damage model based on irreversible thermodynamics, International Journal of Plasticity, vol.19, 2003. ,
On the development and identification of phenomenological damage models -Application to industrial wire drawing and rolling processes, Key Engineering Materials, vol.554, pp.213-226, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00847739
Identification methodology and comparison of phenomenological ductile damage models via hybrid numericalexperimental analysis of fracture experiments conducted on a zirconium alloy, International Journal of Solids and Structures, vol.50, pp.3984-3999, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-00861363
Une loi différentielle d'endommagement de fatigue avec cumulation non linéaire. Revue. Française de Mécanique, pp.50-51, 1974. ,
, Topics in Applied Continuum Mechanics, pp.137-155, 1974.
Continuum damage mechanics: Part I-General concepts, Journal of Applied Mechanics, vol.55, 1988. ,
DOI : 10.1115/1.3173661
Development of continuum damage mechanics for elastic solids sustaining anisotropic and unilateral damage, International Journal of Damage Mechanics, vol.2, pp.311-329, 1993. ,
DOI : 10.1177/105678959300200401
Thermodynamically founded CDM models for creep and other conditions, Creep and Damage in Materials and Structures, pp.209-283, 1999. ,
DOI : 10.1007/978-3-7091-2506-9_5
A CDM approach of ductile damage with plastic compressibility, International Journal of Fracture, vol.137, 2006. ,
DOI : 10.1007/s10704-005-3061-5
On evolution laws of anisotropic damage, Engineering Fracture Mechanics, vol.34, pp.90130-90136, 1989. ,
DOI : 10.1016/0013-7944(89)90130-6
An anisotropic theory of continuum damage mechanics for ductile fracture, Engineering Fracture Mechanics, vol.27, pp.90108-90109, 1987. ,
DOI : 10.1016/0013-7944(87)90108-1
On critical conditions for shear band formation at high strain rates, Scripta Metallurgica, vol.18, pp.90418-90424, 1984. ,
DOI : 10.1016/0036-9748(84)90418-6
Emboutissage des tôles -Importance des modes de déformation, 2011. ,
Mémoire sur l'emploi du fer et de l'acier dans les constructions, Annales des Ponts et Chaussées, vol.9, p.574, 1885. ,
Damage induced elastic anisotropy, Colloque Euromech 115, 1979. ,
A finite element formulation based on non-associated plasticity for sheet metal forming, International Journal of Plasticity, vol.24, pp.646-687, 2008. ,
Determination of the limiting strains at the onset of necking, Centre for Research in Metallurgy, vol.42, pp.33-35, 1975. ,
Formage incrémental de tôle d'aluminium : étude du procédé à l'aide de la mesure de champs et identification de modèles de comportement, 2009. ,
Investigation of localization due to damage in elasto-plastic materials, Mechanics of Materials, vol.19, 1995. ,
Relations of experiments to mathematical theories of plasticity, Journal of Applied Mechanics, pp.349-357, 1949. ,
Some implications of work hardening and ideal plasticity, Quarterly of Applied Mathmatics, vol.7, pp.411-418, 1950. ,
On uniqueness in the theory of plasticity, Quarterly of Applied Mathmatics, vol.14, pp.35-42, 1956. ,
Perturbation analysis of thermoviscoplastic instabilities in biaxial loading, International Journal of Solids and Structures, vol.27, pp.90216-90219, 1991. ,
An efficient inverse approach for material hardening parameter identification from a three-point bending test, Engineering with Computers, vol.26, 2010. ,
Strain localization analysis for single crystals and polycrystals: Towards microstructure-ductility linkage, International Journal of Plasticity, vol.48, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-01081928
Ellipticity loss analysis for tangent moduli deduced from a large strain elasticplastic self-consistent model, International Journal of Plasticity, vol.25, pp.205-238, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-01081905
Instability and localization of plastic flow in shear at high strain rates, Journal of the Mechanics and Physics of Solids, vol.35, pp.185-211, 1987. ,
FLC determination and forming analysis by optical measurement system, in: Hora P (Ed) Numerical and Experimental Methods in Prediction of Forming Limits in Sheet Forming and Tube Hydroforming Processes, ETH Zürich, pp.74-81, 2006. ,
Modelling and numerical simulation of thick sheet double slitting process using continuum damage mechanics, International Journal of Damage Mechanics, vol.23, 2014. ,
Recent extensions of Gurson's model for porous ductile metals, Continuum Micromechanics, pp.61-130, 1997. ,
Application of strain analysis to sheet metal forming problems in the press shop (SAE Technical Paper No. 680093), 1968. ,
Effect of changing strain paths on Forming Limit Diagrams of AI 2008-T4, Metallurgical Transactions A, vol.24, 1993. ,
The influence of strain-path changes on forming limit diagrams of A1 6111 T4, International Journal of Mechanical Sciences, vol.36, pp.90053-90054, 1994. ,
Determination of the forming limit curves by means of Marciniak's punch. Mémoires Scientifiques de la Revue de Métallurgie, vol.4, pp.570-578, 1980. ,
Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I-Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, 1977. ,
DOI : 10.2172/7351470
Use of two behaviour laws for the determination of the forming-limit stress diagram of a thin steel sheet: results and comparisons, Journal of Materials Processing Technology, vol.106, pp.637-640, 2000. ,
Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: Modelling, numerical analysis and identification, International Journal of Plasticity, vol.22, pp.2226-2271, 2006. ,
Contribution à la mise en forme des tôles métalliques : application au retour élastique et à la localisation, 2007. ,
Strain localization analysis using a large deformation anisotropic elastic-plastic model coupled with damage, International Journal of Plasticity, vol.25, 1970. ,
DOI : 10.1016/j.ijplas.2008.12.013
URL : https://hal.archives-ouvertes.fr/hal-01206515
A simple forming limit curve technique and results on aluminum alloys, Proceedings of the IDDRG Congress, vol.8, pp.5-6, 1972. ,
Simple Technique For Determining Forming Limit Curves, Sheet Metal Industries, vol.52, pp.671-676, 1975. ,
The plasticity of an isotropic aggregate of anisotropic face centred cubic crystals, Journal of Applied Mechanics, pp.241-249, 1954. ,
A theory of the yielding and plastic flow of anisotropic metals, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.193, pp.281-297, 1948. ,
On discontinuous plastic states, with special reference to localized necking in thin sheets, Journal of the Mechanics and Physics of Solids, vol.1, pp.90003-90006, 1952. ,
DOI : 10.1016/0022-5096(52)90003-3
A general theory of uniqueness and stability in elastic-plastic solids, Journal of the Mechanics and Physics of Solids, vol.6, pp.90029-90031, 1958. ,
Theoretical plasticity of textured aggregates, Mathematical Proceedings of the Cambridge Philosophical Society, vol.85, pp.179-191, 1979. ,
DOI : 10.1017/s0305004100055596
Constitutive modelling of orthotropic plasticity in sheet metals, Journal of the Mechanics and Physics of Solids, vol.38, 1990. ,
A user-friendly theory of orthotropic plasticity in sheet metals, International Journal of Mechanical Sciences, vol.35, issue.93, p.90061, 1993. ,
Prediction of forming limit strains under strain-path changes: Application of an anisotropic model based on texture and dislocation structure, International Journal of Plasticity, vol.14, pp.647-669, 1998. ,
A procedure for identifying the plastic behavior of single crystals from the local response of polycrystals, Acta Materialia, vol.51, pp.5477-5488, 2003. ,
Prediction methods for ductile sheet metal failure using FE-simulation, Proceedings of IDDRG'94, 1994. ,
A prediction method of ductile sheet metal failure in FE simulation, Proceedings of Numisheet, pp.252-256, 1996. ,
On yield loci of anisotropic cubic metals, Proceedings of the 7th North American Metalworking Conference (NMRC). SME, pp.191-197, 1979. ,
European efforts in standardization of FLC, in: Hora P (Ed) Numerical and Experimental Methods in Prediction of Forming Limits in Sheet Forming and Tube Hydroforming Processes, ETH Zürich, pp.24-25, 2006. ,
Sheet Necking-II. Time-Independent Behavior, Mechanics of Sheet Metal Forming, pp.127-153, 1978. ,
DOI : 10.1007/978-1-4613-2880-3_11
, International Organization for Standardization, Metallic MaterialsSheet and Strip -Determination of Forming-Limit Curves, Part 1: Measurement and application of forming-limit diagrams in the press shop, pp.12004-12006, 2008.
On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects, International Journal of Solids and Structures, vol.25, pp.90015-90017, 1989. ,
DOI : 10.1016/0020-7683(89)90015-2
On Creep Rupture Time, Izv. Akad. Nauk SSSR Otd. Tekhnicheskich Nauk, pp.26-31, 1958. ,
High strain-rate tensile testing and viscoplastic parameter identification using microscopic high-speed photography, International Journal of Plasticity, vol.20, pp.561-575, 2004. ,
DOI : 10.1016/s0749-6419(03)00041-x
Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model, Journal of Materials Processing Technology, vol.216, pp.472-483, 2015. ,
A general anisotropic yield criterion using bounds and a transformation weighting tensor, Journal of the Mechanics and Physics of Solids, vol.41, pp.1859-1886, 1993. ,
DOI : 10.1016/0022-5096(93)90073-o
Forming Limit Criteria -Sheets, Advances in Deformation Processing, pp.127-157, 1978. ,
DOI : 10.1007/978-1-4613-4024-9_4
Plastic instability and fracture in sheets stretched over rigid punches, ASM Transactions Quarterly, vol.56, pp.25-48, 1963. ,
Relationship between laboratory material characterization and press-shop formability, International Symposium on High Strength, Low Alloy Steels, pp.517-528, 1977. ,
Effect of strain ratios on the deforming limit of steel sheet and its application to the actual press forming, Proceedings of the IDDRG Congress, pp.8-9, 1972. ,
Stress integration procedures for inelastic material models within the Finite Element Method, Applied Mechanics Reviews, vol.55, 2002. ,
Effect of strain path change on limits to ductility of anisotropic metal sheets, International Journal of Mechanical Sciences, vol.42, pp.29-35, 2000. ,
New criteria for predicting the press performance of deep-drawing sheets, Transactions of the American Society of Metals, vol.42, pp.1197-1232, 1950. ,
Effects of strain path changes on the formability of sheet metals, Metallurgical Transactions A, vol.9, pp.1849-1856, 1978. ,
Elastic-Plastic Deformation at Finite Strains, Journal of Applied Mechanics, vol.36, 1969. ,
DOI : 10.21236/ad0678483
Contributions à la prédiction d'instabilités de type structure et matériau : modélisation de critères et formulation d'éléments finis adaptés à la simulation des structures minces (Mémoire HDR), 2009. ,
Contribution a l'analyse du retour élastique en emboutissage, 2009. ,
Evaluation of dissipation and damage in metals, Mechanical Behavior of Materials, Proceedings of the International Conference on Mechanical Behavior, 1971. ,
A Continuous Damage Mechanics Model for Ductile Fracture, Journal of Engineering Materials and Technology, vol.107, 1985. ,
, Mécanique des matériaux solides, 2009.
A Course on Damage Mechanics, 1992. ,
Anisotropic damage law of evolution, European Journal of Mechanics -A/Solids, vol.19, pp.161-164, 2000. ,
Modélisation et identification de l'endommagement plastique des métaux. Presented at the 3ème Congrés Français de Mécanique, 1977. ,
An explicit integration scheme for finite-deformation plasticity in finite-element methods. Finite Elements in, Analysis and Design, vol.15, 1993. ,
Anisotropic stiffness degradation triggers onset of strain localization, International Journal of Plasticity, vol.13, issue.97, pp.19-22, 1997. ,
Qualitative analysis of strain localization. Part II: Transversely isotropic elasticity and plasticity, International Journal of Plasticity, vol.13, 1997. ,
A unified approach for parameter identification of inelastic material models in the frame of the finite element method, Computer Methods in Applied Mechanics and Engineering, vol.136, issue.96, pp.991-998, 1996. ,
Ductility limit prediction using a GTN damage model coupled with localization bifurcation analysis, Mechanics of Materials, vol.76, pp.64-92, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01196426
Limit strains in the processes of stretch-forming sheet metal, International Journal of Mechanical Science, vol.9, pp.609-620, 1967. ,
Influence of the plastic properties of a material on the forming limit diagram for sheet metal in tension, International Journal of Mechanical Sciences, vol.15, 1973. ,
A new necking criterion for the forming limit diagrams, Proceeding of the IDDRG WG Meeting, 1997. ,
Methods for forming limit prediction in ductile metal sheets, Proceedings of IDDRG'06, pp.1-9, 2006. ,
An inverse method for the mechanical characterisation of metals, 1998. ,
Determination of the elasto-plastic properties of aluminium using a mixed numericalexperimental method, Journal of Materials Processing Technology, vol.75, pp.204-211, 1998. ,
Mechanics of solids in plastic state, Göttinger Nachrichten Mathematical Physics, pp.582-592, 1913. ,
Evaluation of associated and non-associated quadratic plasticity models for advanced high strength steel sheets under multi-axial loading, International Journal of Plasticity, vol.26, pp.939-956, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00620567
Macroscopic yield criteria for plastic anisotropic materials containing spheroidal voids, International Journal of Plasticity, vol.24, 2008. ,
URL : https://hal.archives-ouvertes.fr/hal-00687823
Combined effect of damage and plastic anisotropy on the ductility limit of thin metal sheets, Procedia Structural Integrity, vol.2, pp.3577-3584, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-01375783
Experimental and numerical failure criterion for formability prediction in sheet metal forming, Computational Materials Science, vol.43, 2008. ,
Study on the formability of steel sheets, Yawata Technical Report, vol.264, pp.141-154, 1968. ,
Bifurcations in elastic-plastic materials, International Journal of Solids and Structures, vol.30, pp.521-544, 1993. ,
Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars, Acta Materialia, vol.46, pp.541-552, 1998. ,
Non-associated flow rule with symmetric stiffness modulus for isotropic-kinematic hardening and its application for earing in circular cup drawing, International Journal of Solids and Structures, vol.49, pp.3582-3593, 2012. ,
Prediction of complete forming limit diagram from tensile properties of various steel sheets by a nonlinear regression based approach, Journal of Manufacturing Processes, vol.23, 2016. ,
Equi-biaxial anisotropy coefficient used to describe the plastic behavior of sheet metal, Proceedings of the ESAFORM Conference, pp.723-727, 2002. ,
A new method of analyzing stresses and strains in work-hardening plastic solids, Journal of Applied Mechanics, vol.23, pp.493-496, 1956. ,
Modeling of the ductile fracture during the sheet forming of aluminum alloy considering non-associated constitutive characteristic, International Journal of Mechanical Sciences, vol.126, pp.55-66, 2017. ,
On the Equation of State of Creep, Proceedings of the Institution of Mechanical Engineers, vol.1, pp.307-315, 1963. ,
Recent progress in the development of forming limit curves for automotive sheet steels, 1992. ,
Anisotropic ductile damage fully coupled with anisotropic plastic flow: Modeling, experimental validation, and application to metal forming simulation, International Journal of Damage Mechanics, vol.23, pp.1211-1256, 2014. ,
Presented at the 14th IUTAM congress of theoretical and applied mechanics, Koiter WT, pp.207-220, 1976. ,
Qualitative analysis of strain localization. Part I: Transversely isotropic elasticity and isotropic plasticity, International Journal of Plasticity, vol.13, pp.461-499, 1997. ,
Ductile fracture models and their potential in local approach of fracture, Nuclear Engineering and Design, vol.105, 1987. ,
Assemblage mécanique : stratégies d'optimisation des procédés et d'identification des comportements mécaniques des matériaux, École Nationale Supérieure des Mines de, 2011. ,
A new method for the prediction of formability limits in metal sheets, Proceedings of the 7th Biennial Congress of the IDDRG, 1972. ,
Conditions for the localization of deformation in pressuresensitive dilatant materials, Journal of the Mechanics and Physics of Solids, vol.23, pp.371-394, 1975. ,
On the numerical prediction of the ductile fracture in metal forming, Engineering Fracture Mechanics, vol.75, 2008. ,
Damage mechanics in metal forming: advanced modeling and numerical simulation, ISTE Ltd, 2012. ,
Computational damage mechanics. Application to metal forming, Comprehensive Structural Integrity, vol.3, pp.321-376, 2003. ,
On the anelastic flow with damage, International Journal of Damage Mechanics, vol.3, pp.140-169, 1994. ,
Micromorphic approach for finite gradient-elastoplasticity fully coupled with ductile damage: Formulation and computational aspects, International Journal of Solids and Structures, vol.50, pp.2289-2309, 2013. ,
2D Adaptive FE Simulations in Finite Thermo-Elasto-Viscoplasticity with Ductile Damage: Application to Orthogonal Metal Cutting by Chip Formation and Breaking, International Journal of Damage Mechanics, vol.20, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-02275853
An evolutionary anisotropic model for sheet metals based on non-associated flow rule approach, Computational Materials Science, vol.81, pp.15-29, 2014. ,
On some topics for the numerical simulation of ductile fracture, International Journal of Plasticity, vol.24, 2008. ,
Forming Limit Curve Determination of a DP-780 Steel Sheet, Procedia Materials Science, vol.8, 2015. ,
Shear band formation in thermal viscoplastic materials, Mechanics of Materials, vol.8, pp.90003-90006, 1989. ,
Computational analysis of stress-based forming limit curves, International Journal of Solids and Structures, vol.44, 2007. ,
Application of an extended stress-based forming limit curve to predict necking in stretch flange forming, Journal of Manufacturing Science and Engineering, vol.130, 2008. ,
Strain-and stress-based continuum damage models-I. Formulation, International Journal of Solids and Structures, vol.23, pp.90083-90090, 1987. ,
Strain-and stress-based continuum damage models-II. Computational aspects, International Journal of Solids and Structures, vol.23, pp.90084-90093, 1987. ,
Localized necking in thin sheets, Journal of the Mechanics and Physics of Solids, vol.23, pp.90004-90010, 1975. ,
A general forming limit criterion for sheet metal forming, International Journal of Mechanical Sciences, vol.42, issue.98, pp.113-114, 2000. ,
Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD, International Journal of Plasticity, vol.20, pp.1463-1486, 2004. ,
Implementation of the forming limit stress diagram in FEM simulations, Journal of Materials Processing Technology, vol.106, pp.627-627, 2000. ,
Prediction of Necking in Tubular Hydroforming Using an Extended Stress-Based Forming Limit Curve, Journal of Engineering Material Technolgy, vol.129, 2006. ,
A non-associated flow rule for sheet metal forming, International Journal of Plasticity, vol.18, 2002. ,
Anisotropic hardening and non-associated flow in proportional loading of sheet metals, International Journal of Plasticity, vol.25, 2009. ,
Plastic instability under plane stress, Journal of the Mechanics and Physics of Solids, vol.1, pp.90002-90003, 1952. ,
A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming, International Journal of Plasticity, vol.26, pp.288-309, 2010. ,
A non-associated plasticity model with anisotropic and nonlinear kinematic hardening for simulation of sheet metal forming, International Journal of Solids and Structures, vol.69, 2015. ,
Forming limit predictions with the perturbation method using stress potential functions of polycrystal viscoplasticity, International Journal of Mechanical Sciences, vol.38, pp.805-824, 1996. ,
On the yield of solids at high pressures, Comptes Rendus Académie des Sciences, vol.754, 1864. ,
Influence of voids on shear band instabilities under plane strain conditions, International Journal of Fracture, vol.17, pp.389-407, 1981. ,
Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, 1984. ,
Banding and stability in plastic materials, Acta Mechanica, vol.79, 1989. ,
A plasticity-damage theory for large deformation of solids-I. Theoretical formulation, International Journal of Engineering Science, vol.30, pp.1089-1108, 1992. ,
A simple integration algorithm for a nonassociated anisotropic plasticity model for sheet metal forming: a non-associated anisotropic plasticity mode for sheet metal forming, International Journal for Numerical Methods in Engineering, vol.107, pp.183-204, 2016. ,
Crystal plasticity forming limit diagram analysis of rolled aluminum sheets, Metallurgical and Materials Transactions A, vol.29, pp.527-535, 1998. ,
Evaluation of anisotropic yield functions for aluminum sheets, International Journal of Plasticity, vol.19, pp.121-138, 2003. ,
Conditions for shear localization in the ductile fracture of voidcontaining materials, International Journal of Fracture, vol.14, pp.347-365, 1978. ,
Inverse approach to identification of material parameters of cyclic elastoplasticity for component layers of a bimetallic sheet, International Journal of Plasticity, vol.19, 2003. ,
Identification of material parameters in constitutive model for sheet metals from cyclic bending tests, International Journal of Mechanical Sciences, vol.40, pp.237-249, 1998. ,
Identification of fully coupled anisotropic plasticity and damage constitutive equations using a hybrid experimental-numerical methodology with various triaxialities, International Journal of Damage Mechanics, vol.24, 2015. ,
A theoretical and experimental investigation of limit strains in sheet metal forming, International Journal of Mechanical Sciences, vol.38, pp.1307-1317, 1996. ,
A fully coupled elasto-visco-plastic damage theory for anisotropic materials, International Journal of Solids and Structures, vol.32, 1995. ,