, tout en gardant une isolation électrique satisfaisante. Par la suite, plusieurs points pourraient permettre l'obtention d'un composite voulu. L'utilisation d'un compatibilisant ou d'un traitement des charges permettrait d'améliorer les liaisons entre la matrice et les renforts, permettant une meilleure circulation de la chaleur au sein du composite et une teneur mécanique accrue. L'utilisation de polymère avec une tenue mécanique plus élevée permettrait au composite une résistance plus importante. Des renforts de même nature mais de gamme supérieure pourrait accroitre la conductivité thermique effective du composite, Bien que nous n'ayons pas pu atteindre les valeurs souhaitées, les essais réalisés ont permis d'identifier les paramètres à améliorer pour maximiser la conductivité thermique du composite

Y. Agari, Thermal Conductivity of a Polymer Filled with Particles in the Wide Range from Low to Super-High Volume Content, vol.40, pp.929-941, 1990.

J. Aucher, , 2011.

P. Avenas, Le rôle de la cristallinité dans la mise en forme des polymères, Journal de Physique colloques, issue.6, 1978.

Y. Benveniste, Models of thin interphases and the effective medium approximation in composite media with curvilinearly anisotropic coated inclusions, International Journal of Engineering Science, vol.72, pp.140-154, 2013.

Y. Benveniste and T. Miloh, An exact solution for the effective thermal conductivity of cracked bodies with oriented elliptical cracks, Journal of Applied Physics, vol.66, issue.1, pp.176-180, 1989.

Y. Benveniste and G. W. Milton, The effective medium and the average field approximations vis-à-vis the Hashin-Shtrikman bounds. I. The self-consistent scheme in matrix-based composites, Journal of the Mechanics and Physics of Solids, vol.58, issue.7, pp.1026-1038, 2010.

N. Bonfoh, C. Dreistadt, and H. Sabar, Micromechanical modeling of the anisotropic thermal conductivity of ellipsoidal inclusion-reinforced composite materials with weakly conducting interfaces, International Journal of Heat and Mass Transfer, vol.108, pp.1727-1739, 2017.

P. Bonnet, Thermal properties and percolation in carbon nanotube-polymer composites, Applied Physics Letters, vol.91, issue.20, pp.1-4, 2007.
DOI : 10.1063/1.2813625

URL : https://hal.archives-ouvertes.fr/hal-00390635

C. Calvo-jurado and W. J. Parnell, Hashin -Shtrikman bounds on the effective thermal conductivity of a transversely isotropic two-phase composite material, pp.828-843, 2015.

R. M. Christensen, A critical evaluation for a class of micromechanics models, vol.38, pp.379-404, 1990.

R. M. Christensen and K. H. Lo, Solutions for effective shear properties in three phase sphere and cylinder models, Journal of the Mechanics and Physics of Solids, vol.27, issue.4, pp.315-330, 1979.
DOI : 10.1016/0022-5096(79)90032-2

D. Dupuis, Mesure de la viscosité -Viscosimètres et rhéomètres Mesure de la viscosité Viscosimètres et rhéomètres, p.33, 2008.

J. Eshelby, The determination of the elastic field of an ellipsoidal inclusion, and related problems, 1957.

S. Giordano, Nonlinear effective behavior of a dispersion of randomly oriented coated ellipsoids with arbitrary temporal dispersion, International Journal of Engineering Science, vol.33, pp.1-22, 2015.

S. Giordano and P. L. Palla, Dielectric behavior of anisotropic inhomogeneities: interior and exterior point Eshelby tensors, Journal of Physics A: Mathematical and Theoretical, vol.41, issue.41, p.415205, 2008.
DOI : 10.1088/1751-8113/41/41/415205

Z. Hashin, Assessment of the Self Consistent Scheme Approximation: Conductivity of Particulate Composites, Journal of Composite Materials, vol.2, issue.3, pp.284-300, 1968.

Z. Hashin, The elastic moduli of heterogeneous materials, 1960.

Z. Hashin and S. Shtrikman, A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials, Journal of Applied Physics, vol.33, issue.10, p.3125, 1962.

D. P. Hasselman and F. Johnson, Effective thermal conductivity of composites with interfacial thermal barrier resistance, Journal of Composite Materials, 1987.

H. Hatta and M. Taya, Equivalent inclusion method for steady state heat conduction in composites, p.24, 1986.

E. Herve, Thermal and thermoelastic behaviour of multiply coated inclusion-reinforced composites, International Journal of Solids and Structures, vol.39, pp.1041-1058, 2002.
DOI : 10.1016/s0020-7683(01)00257-8

URL : https://hal.archives-ouvertes.fr/hal-00111351

J. Hong, High thermal conductivity epoxy composites with bimodal distribution of aluminum nitride and boron nitride fillers, Thermochimica Acta, vol.537, pp.70-75, 2012.
DOI : 10.1016/j.tca.2012.03.002

H. Ishida and S. Rimdusit, Very high thermal conductivity obtained by boron nitridefilled polybenzoxazine, Thermochimica Acta, vol.320, pp.177-186, 1998.
DOI : 10.1016/s0040-6031(98)00463-8

J. Jost, , 2005.

K. Kalaitzidou, H. Fukushima, and L. T. Drzal, Multifunctional polypropylene composites produced by incorporation of exfoliated graphite nanoplatelets, Carbon, vol.45, issue.7, pp.1446-1452, 2007.
DOI : 10.1016/j.carbon.2007.03.029

P. L. Kapitza, Heat transfer and superfluidity of helium II, Physical Review, 1941.
DOI : 10.1103/physrev.60.354

O. D. Kellogg, Foundations of Potential Theory, 1929.

J. A. King, Effects of Carbon Fillers in Thermally Conductive Polypropylene Based Resins, 2010.

I. A. Kunin, Elastic Media with Microstructure II: Three Dimensionnal Models, 1983.

V. I. Kushch, I. Sevostianov, and A. S. Belyaev, Effective conductivity of spheroidal particle composite with imperfect interfaces: Complete solutions for periodic and random micro structures, Mechanics of Materials, vol.89, pp.1-11, 2015.

L. Lécrivain, Céramiques. Généralités. Techniques de l'Ingénieur, p.33, 1987.

J. Lee and J. Kim, Generalized Self-Consistent Model for Predicting Thermal Conductivity of Composites with Aligned Short Fibers, Materials Transactions, vol.51, issue.11, pp.2039-2044, 2010.

J. Lee and J. Kim, Governing equations for effective thermal conductivity of composites with coated short fibers, International Journal of Heat and Mass Transfer, vol.67, pp.654-658, 2013.

H. Li, Q. Zeng, and S. Xu, Effect of pore shape on the thermal conductivity of partially saturated cement-based porous composites. Cement and Concrete Composites, vol.81, pp.87-96, 2017.

T. Li and S. L. Hsu, Enhanced Thermal Conductivity of Polyimide Films via a Hybrid of Micro-and Nano-Sized Boron Nitride, pp.6825-6829, 2010.

Y. P. Mamunya, Electrical and thermal conductivity of polymers filled with metal powders, European Polymer Journal, vol.38, issue.9, pp.1887-1897, 2002.

. Maxwell, A treatise on electicity and magnetism, 1873.

J. Ordonez-miranda, R. Yang, and J. J. Alvarado-gil, Nanoscale Thermoelectrics X, 2014.

P. Ponte-castañeda and J. R. Willis, The effect of spatial distribution on the effective behavior of composite materials and cracked media, vol.43, pp.1919-1951, 1995.

J. H. Randrianalisoa, Transfert thermique par rayonnement et conduction dans les matériaux poreux micro et nanostructurés . Analogie transfert de phonons et de photons, 2006.

L. Rivière, Analyse des mécanismes de conduction thermique dans les composites structuraux PEEK/particules submicroniques d'argent, 2016.

I. H. Tavman, Thermal and mechanical properties of copper powder filled poly ( ethylene ) composites, Powder Technology, vol.91, pp.63-67, 1996.

H. S. Tekce and D. Kumlutas, Effect of Particle Shape on Thermal Conductivity of Copper Reinforced Polymer Composites, Journal of reinforced plastics and composites, vol.26, issue.1, pp.113-121, 2016.

A. Toureille, Mesures électriques des matériaux diélectriques solides Mesures électriques des matériaux diélectriques solides, p.33, 2009.

W. S. Weiglhofer, A. Lakhtakia, and B. Michel, Maxwell garnett and bruggeman formalisms for a particulate composite with bianisotropic host medium, vol.15, pp.263-266, 1997.

Y. Zhao, Z. Zhai, and D. Drummer, Thermal Conductivity of Aluminosilicate-and Aluminum Oxide-Filled Thermosets for Injection Molding : Effect of Filler Content, pp.12-16, 2018.