M. Li, M. Khelifa, and M. El-ganaoui, Mechanical characterization of concrete containing wood shavings as aggregates, Int J Sustainable Built Environ, vol.6, pp.587-596, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01673540

A. B. Constatinos, G. G. Athina, G. Elena, M. Sevastianos, M. Yiannis et al., European residential buildings stock, energy consumption, emissions and potential energy savings, Build Environ, vol.42, pp.1298-1314, 2007.

S. Amziane and M. Sonebi, Overview on bio-based building material made with plant aggregate, RILEM Technical Letters, vol.1, pp.31-38, 2016.

R. W. Wolfe and A. Gjinolli, Cement-Bonded Wood Composites as an Engineering Material, Proceedings, Forest Product Society, pp.84-91, 1997.

F. Pacheco-torgal and S. Jalali, Cementitious building materials reinforced with vegetable fibres. A review, Constr Build Mater, vol.25, issue.2, pp.575-581, 2011.

K. A. Rim, A. Ledhem, O. Douzane, R. Dheilly, and M. Queneudec, Influence of the proportion of wood on the thermal and mechanical performances of claycementwood composites, Cem Concr Compos, vol.21, issue.4, pp.269-276, 1999.

V. Corinaldesi, A. Mazzoli, and R. Siddique, Characterization of lightweight mortars containing wood processing by-products waste, Constr Build Mater, vol.123, pp.281-289, 2016.

A. Bouguerra, O. Amiri, A. Aït-mokhtar, and M. B. Diop, Water sorptivity and pore structure of wood cementitious composites, Mag Conc Res, vol.54, issue.2, pp.103-112, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00312176

P. Coatanlem, R. Jauberthie, and F. Rendell, Lightweight wood chipping concrete durability, Constr Build Mater, vol.20, issue.9, pp.776-781, 2006.

M. Bederina, B. Laidoudi, A. Goullieux, M. M. Khenfer, A. Bali et al., Effect of the treatment of wood shavings on the physico-mechanical characteristics of wood sand concretes, Constr Build Mater, vol.23, issue.3, pp.1311-1315, 2009.

, Comsol Multiphysics ® . V. 5.3, www.comsol.com, COMSOL AB

C. E. Hagentoft, . Hamstad-final, and . Report, Methodology of HAM-Modeling, 2002.

F. Collet and S. Pretot, Thermal conductivity of hemp concretes: Variation with formulation, density and water content, Constr. Build. Mater, vol.65, pp.612-619, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01003739

E. , ?ise au point d'un composite ciment-bois dont les variations Dimensionnelles vis-à-vis des variations d'humidité sont contrôlées, 1992.

A. Rim and K. , Influence of the proportion of wood on the thermal and mechanical performances of clay-cement-wood composites. Cement Concrete Comp, vol.21, pp.269-276, 1999.

M. L. Benmalek, H. Houari, A. Bali, and M. Queneudec, Comportement d'un composite fine minérale -ciment -bois élaboré à l'aide de déchets industriels solides

, Sciences & Technologie, vol.13, pp.65-72, 2000.

P. Coatanlem, R. Jauberthie, and F. Rendell, Lightweight wood chipping concrete durability, Constr. Build. Mater, vol.20, pp.776-781, 2006.

G. H. Tonoli, A. P. Joaquim, M. A. Arsène, K. Biliba, and H. Savastano, Performance and Durability of Cement Based Composites Reinforced with Refined Sisal Pulp. Materials and Manufacturing Processes, vol.22, pp.149-156, 2007.
URL : https://hal.archives-ouvertes.fr/hal-02151022

H. Savastano, P. G. Warden, and R. S. Coutts, Mechanically pulped sisal as reinforcement in cementitious matrices, Cement Concrete Comp, vol.25, pp.311-319, 2003.

P. Soroushian and S. Ravanbakhsh, Control of Plastic Shrinkage Cracking with Specialty Cellulose Fibers, Materials Journal, vol.95, pp.429-435, 1998.

M. Bentchikou, A. Guidoum, K. Scrivener, K. Silhadi, and S. Hanini, Effect of recycled cellulose fibres on the properties of lightweight cement composite matrix

, Constr. Build. Mater, vol.34, pp.451-456, 2012.

J. Biagiotti, D. Puglia, and J. Kenny, A review on natural fibre-based composites-part I, Journal of Natural Fibers, vol.1, pp.37-68, 2004.

J. M. Reis, Fracture and flexural characterization of natural fiber-reinforced polymer concrete, Constr. Build. Mater, vol.20, pp.673-678, 2006.

V. K. Thakur, Cellulose-Based Graft Copolymers: Structure and Chemistry, 2015.

D. N. Saheb and J. P. Jog, Natural fiber polymer composites: A review, Advances in Polymer Technology, vol.18, pp.351-363, 1999.

G. Kalaprasad, K. Joseph, S. Thomas, and C. Pavithran, Theoretical modelling of tensile properties of short sisal fibre-reinforced low-density polyethylene composites, Journal of Materials Science, vol.32, pp.4261-4267, 1997.

J. Gassan and A. Bledzki, Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment of fibres

, Composites Science and Technology, vol.59, pp.1303-1309, 1999.

A. Mustafa, M. F. Abdollah, F. F. Shuhimi, N. Ismail, H. Amiruddin et al., Selection and verification of kenaf fibres as an alternative friction material using Weighted Decision Matrix method, Materials & Design, vol.67, pp.577-582, 2015.

I. M. Rosa, J. M. Kenny, D. Puglia, C. Santulli, and F. Sarasini, Tensile behavior of New Zealand flax (Phormium tenax) fibers, J. Reinf. Plast. Comp, vol.29, pp.3450-3454, 2010.

M. Karus, M. Kaup, and D. Lohmeyer, Study on markets and prices for natural fibres

L. U. Devi, S. S. Bhagawan, and S. Thomas, Mechanical properties of pineapple leaf fiberreinforced polyester composites, J. Appl. Polym. Sci, vol.64, pp.1739-1748, 1997.

A. Vázquez, V. A. Domínguez, and J. Kenny, Bagasse Fiber-Polypropylene Based Composites, J. Thermoplast. Compos, vol.12, pp.477-497, 1999.

K. G. Satyanarayana, K. Sukumaran, P. S. Mukherjee, C. Pavithran, and S. G. Pillais, Natural fibre-polymer composites, Cement Concrete Comp, vol.12, pp.117-136, 1990.

J. A. Youngquist, Wood-based composites and panel products, 1999.

N. Parameswaran, F. W. Broker, and M. H. Simatupang, Zur mikrotechnologie mineralgebundener holzwerkstoffe wechselwirkung zwischen bindemitteln und holz

, Physics and Technology of Wood, vol.31, p.173, 2009.

K. Dewitz, B. Kuschy, and T. Otto, Stofftransporte bei der abbindung zementgebundener holzwerkstoffe, Holztechnologie, vol.3, pp.151-154, 1984.

M. Li, M. Khelifa, and M. El-ganaoui, Mechanical characterization of concrete containing wood shavings as aggregates, Int J Sustainable Built Environ, vol.6, pp.587-596, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01673540

A. N. Papadopoulos, G. A. Ntalos, and L. Kakaras, Mechanical and physical properties of cement-bonded OSB, Holz als Roh-und Werkstoff, vol.64, pp.517-518, 2006.

H. J. Deppe, On the production and application of cement-bonded wood chipboards

, Proc. 8th Washington State Symposiumon Particleboard, pp.267-286, 1974.

B. Koohestani, A. Koubaa, T. Belem, T. Bussière, B. Bouzahzah et al., Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler, Constr. Build. Mater, vol.121, pp.222-228, 2016.

R. Sudin and N. Swamy, Bamboo and wood fibre cement composites for sustainable infrastructure regeneration, J. Mater. Sci, vol.41, issue.21, pp.6917-6924, 2006.
DOI : 10.1007/s10853-006-0224-3

S. Taj, M. A. Munawar, and S. Khan, Natural fiber-reinforced polymer composites

, Proc. Pakistan. Acad. Sci, vol.44, issue.2, pp.129-144, 2007.

S. Bashar, B. S. Mohammed, M. Abdullahi, and C. K. Hoong, Statistical models for concrete containing wood chipping as partial replacement to fine aggregate

, Constr. Build. Mater, vol.55, pp.13-19, 2014.

A. S. Agar-ozbek, J. Weeheijim, E. Schlangen, and K. V. Bruegel, Investigating porous Concrete with improved strength: testing at different scales
DOI : 10.1016/j.conbuildmat.2012.12.040

, Constr. Build. Mater, vol.41, pp.480-490, 2013.

J. T. Kevern, K. Wang, and V. R. Schaefer, Effect of coarse aggregate on the freezethaw durability of pervious concrete, J. Mater. Civ. Eng, vol.22, pp.469-475, 2010.

J. T. Kevern, D. Biddle, and Q. Cao, Effects of macrosynthetic fibers on pervious concrete properties, J. Mater. Civ. Eng, vol.27, issue.9, 2015.

Y. Cao and Y. Wu, Evaluation of statistical strength of bamboo fiber and mechanical properties of fiber reinforced green composites

, J Central South University of Technology, vol.15, pp.564-567, 2008.

B. H. Lee, H. J. Kim, and W. R. Yu, Fabrication of long and discontinuous natural fiber reinforced polypropylene biocomposites and their mechanical properties
DOI : 10.1007/s12221-009-0083-z

, Fiber Polym, vol.10, pp.83-90, 2009.

X. Li, L. G. Tabil, and S. Panigrahi, Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review, J Polym Environ, vol.15, pp.25-33, 2007.

G. Mehta, A. K. Mohanty, and K. Thayer, Novel Biocomposites Sheet Molding Compounds for Low Cost Housing Panel Applications
DOI : 10.1007/s10924-005-3211-x

, J Polym Environ, vol.13, pp.169-175, 2005.

K. L. Pickering, M. G. Efendy, and T. M. Le, A review of recent developments in natural fibre composites and their mechanical performance

, Compos Part A-Appl S, vol.83, pp.98-112, 2016.

E. G. Wolff, Moisture effects on polymer matrix composites, Sample J, vol.29, pp.11-19, 1993.

P. S. Chua, S. R. Dai, and M. R. Piggott, Mechanical properties of the glass fibre-polyester interphase, J Mater Sci, vol.27, pp.913-918, 1992.

G. Pritchard and S. D. Speake, The use of water absorption kinetic data to predict laminate property changes, Composites, vol.18, pp.227-232, 1987.

B. Wielagea, T. Lampkea, and G. Marxb, Thermogravimetric and differential scanning calorimetric analysis of natural fibres and polypropylene

, Thermochim Acta, vol.337, pp.169-177, 1999.

J. M. Franssen, Contributions à la modélisation des incendies et leurs effets sur les bâtiments. Thèse d'agrégation de l'enseignement supérieur

, Techniques de l'ingénieur. Techniques du bâtiment : Connaître les matériaux de la construction, 2014.

, EN-197-1 Eurpean standard of Cement-Part 1: Composition, specification and conformity criteria for common cements

E. Y. Okino, Cement-bonded wood particleboard with a mixture of eucalypt and rubberwood, vol.26, pp.729-734, 2004.

M. H. Hachmi and A. A. Moslemi, Correlation between wood-cement compatibility and wood extractives, Forest Prod J, vol.39, issue.6, pp.55-58, 1989.

C. Pereira, F. Caldeira, . Jorge, and J. M. Ferreira, Adsorption of cations from a cement suspension onto lignocellulosic substrates and its influence on cement setting

, J Wood Chem Technol, vol.25, issue.4, pp.231-244, 2005.

, Comsol Multiphysics ® . V. 5.3, www.comsol.com, COMSOL AB

. Abaqus, Finite Element Modelling Programme and Standard User's Manual

. Abaqus, Finite Element Modelling Programme and Standard User's Manual

. Astm-d3501-94, Standard Test Methods for Wood-Based Structural Panels in Compression, 2000.

, ASTM D3043-00. Standard test methods for structural panels in flexure, 2002.

. Astm-d1037-99, Standard test methods for evaluation properties of wood-base fiber and particle panel materials, 1999.

M. Li, M. Khelifa, and M. El-ganaoui, Mechanical characterization of concrete containing wood shavings as aggregates, Int J Sustainable Built Environ, vol.6, pp.587-596, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01673540

J. Lubliner, J. Oliver, S. Oller, and E. Onate, A plastic-damage model for concrete

, Int J Solids Struct, vol.25, pp.299-326, 1989.

J. Lee and G. L. Fenves, Plastic-Damage Model for Cyclic Loading of Concrete Structures, J Eng Mech, vol.124, issue.8, pp.882-900, 1998.

P. Drucker, Soil mechanics and plastic analysis or limit design, Q Appl Math, vol.10, pp.157-165, 1952.

M. Arslan, O. ?im?ek, and S. Suba?i, Effects of formwork surface materials on concrete lateral pressure, Constr Build Mater, vol.19, pp.319-325, 2005.

W. R. Anthony and P. J. Stainer, Concrete high rises offer many cost advantages, Concrete Construct, vol.33, pp.452-458, 1988.

G. B. Kim, K. Pilakouta, and P. Waldron, Development of Thin FRP Reinforced GFRC Permanent Formwork Systems, Constr Build Mater, vol.22, pp.2250-2259, 2008.

K. Y. Leung and Q. Cao, Development of Pseudo-Ductile Permanent Formwork for Durable Concrete Structures, Mater Struct, vol.43, pp.993-1007, 2010.

C. Yu, The Study of Reinforced Pseudo-Ductile Cementitious Composite Permanent Formwork, 2014.

R. Goyal, A. Mukherjee, and S. Goyal, An investigation on bond between FRP stay-in-place formwork and concrete, Constr Build Mater, vol.113, pp.741-751, 2016.

B. T. Huang, Q. H. Li, S. L. Xu, and C. F. Li, Development of reinforced ultra-high toughness cementitious composite permanent formwork: Experimental study and Digital Image Correlation analysis, Compos Struct, vol.180, pp.892-903, 2017.

T. Proske, K. H. Khayat, A. Omran, and O. Leitzbach, Form pressure generated by fresh concrete: a review about practice in formwork design, Mater Struct, vol.47, pp.1099-1113, 2014.

W. J. David, P. K. Khusroo, and B. P. James, Formwork pressures in tall and thick concrete walls, Construct Eng Manage, vol.115, issue.3, pp.444-61, 1984.

W. Zhang, J. Huang, Z. Li, and H. Chun, An experimental study on the lateral pressure of fresh concrete in formwork, Constr Build Mater, vol.111, pp.450-460, 2016.

, Guide to Formwork for Concrete, pp.347-351, 2004.

, Construction Industry Research and Information Association, vol.108, 1985.

, Pressure of Fresh Concrete on Vertical Formwork, DIN 18218, 1980.

. Can/csa-s269, 3: Concrete formwork, 1992.

, Falsework -Performance Requirements and General Design, 2008.

Y. Debard and . Rdm6, Logiciel de calcul des structures en appliquant la Résistance Des Matériaux

A. Bouguerra, A. Aït-mokhtar, O. Amiri, and M. Diop, Measurement of thermal conductivity, thermal diffusivity and heat capacity of highly porous building materials using transient plane source technique, Int Commun Heat Mass, vol.28, pp.1065-1078, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00312177

R. Walker, S. Pavia, and R. Mitchell, Mechanical properties and durability of hemp-lime concretes, Constr Build Mater, vol.61, pp.340-348, 2014.

F. Collet and S. Pretot, Thermal conductivity of hemp concretes: Variation with formulation, density and water content, Constr Build Mater, vol.65, pp.612-619, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01003739

T. Colinart, P. Glouannec, and P. Chauvelon, Influence of the setting process and the formulation on the drying of hemp concrete, Constr Build Mater, vol.30, pp.372-380, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00718255

A. Houngan, C. Awanto, L. Fagbemi, M. Anjorin, and A. Vianou, Mass diffusivity measurements of two cement based materials, Journal of Civil Engineering and Construction Technology, vol.6, pp.86-92, 2015.

A. Bouguerra, H. Sallée, F. De-barquin, R. M. Dheilly, and M. Queneudec, Isothermal moisture properties of wood-cementitious composites, Cement Concrete Res, vol.29, pp.339-347, 1999.

J. Chamoin, Optimisation des propriétés (physiques, hydriques et mécaniques) de bétons de chanvre par la maîtrise de la formulation, INSA Rennes, 2013.

F. Collet, M. Bart, L. Serres, and J. Miriel, Porous structure and water vapour sorption of hemp-based materials, Constr Build Mater, vol.22, pp.1271-1280, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00705133

M. Rahim, T. Le, A. D. Douzane, O. Promis, G. Langlet et al., Numerical investigation of the effect of non-isotherme sorption characteristics on hygrothermal behavior of two biobased building walls, Journal of Building Engineering, vol.7, pp.263-272, 2016.

D. Vries and D. A. , Simultaneous transfer of heat and moisture in porous media, Transactions of the American Geophysical Union, vol.39, pp.909-916, 1958.

Y. A. Oumeziane, Evaluation des performances hygrothermiques d'une paroi par simulation numérique : application aux parois en béton de chanvre

. Ph, . Thesis, and . Rennes, , 2013.

M. Qin, R. Belarbi, A. Aït-mokhtar, and L. O. Nilsson, Coupled heat and moisture transfer in multi-layer building materials, Constr Build Mater, vol.23, pp.967-975, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00384166

A. Trabelsi, Etude numérique et expérimentale des transferts hygrothermiques dans les milieux poreux du bâtiment, 2010.

A. V. Luikov, Heat and mass transfer in capillary-porous bodies, 1966.

J. R. Philip and D. A. De-vries, Moisture movement in porous material under temperature gradients. Transaction of american geophysical union, vol.38, pp.222-232, 1957.

A. F. Nielsen, Gamma-ray-attenuation used for measuring the moisture content and homogeneity of porous concrete, Build Sci, vol.7, pp.257-263, 1972.

C. Rode, Combined heat and moisture transfer in building constructions, 1990.

H. M. Kunzel, Simultaneous heat and moisture transport in building components: oneand two-dimensional calculation using simple parameters

, Fraunhofer IRB Verl Suttgart, pp.3-8167

, Plastic -Determination of thermal conductivity and thermal diffusivity -Part 2: Transient plane heat source (hot disc) method, pp.22007-22009, 2015.

Y. He, Rapid thermal conductivity measurement with a hot disk sensor: Part 1. Theoretical considerations, Thermochim Acta, vol.436, pp.122-129, 2005.

D. P. Bentz, Transient plane source measurements of the thermal properties of hydrating cement pastes, Mater Struct, vol.40, p.1073, 2007.

H. Jin, X. Yao, L. Fan, X. Xu, and Z. Yu, Experimental determination and fractal modeling of the effective thermal conductivity of autoclaved aerated concrete: Effects of moisture content, Int J Heat Mass Tran, vol.92, pp.589-602, 2016.

, ISO 12571:2000 -Hygrothermal performance of building materials and products: Determination of hygroscopic sorption properties, 2000.

, Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials, ASTM C1498-01, 2001.

A. Evrard, Transient hygrothermal behaviour of Lime-Hemp Materials, 2008.

S. Brunauer, P. H. Emmett, and E. Teller, Adsorption of Gases in Multimolecular Layers, J Am Chem Soc, vol.60, pp.309-319, 1938.

E. Guggenheim, Application of statistical mechanics

R. Anderson, Modifications of the Brunauer, Emmett and Teller Equation, J Am Chem Soc, vol.68, pp.686-691, 1946.

D. Boer and J. H. , The dynamical character of adsorption, 1953.

K. K. Hansen,

, BS EN 317:1993 -Particleboards and fibreboards. Determination of swelling in thickness after immersion in water, 1993.

D. Lelièvre, Simulation numérique des transferts de chaleur et d'humidité dans une paroi multicouche de bâtiment en matériaux biosourcé

. Ph, , 2015.

M. Krus, Moisture transport and storage coefficients of porous mineral building materials: Theoretical principles and new test methods

, Comsol Multiphysics ® . V. 5.3, www.comsol.com, COMSOL AB

C. Hagentoft, , 2002.

A. ?. , Guide technique ? Transferts d'humidité à travers les parois, CSTB, 2009.

C. Rode, Moisture buffering of building materials. BYG DTU R-126, 2005.

A. Fadai, M. Kist, W. Winter, and C. Radlherr, Enhance fire behavior of wood-based buildings in social housing, 2016.

L. K. Aggarwal, Studies on cement-bonded coir fibre boards

, Cem Concr Compos, vol.14, pp.63-69, 1992.

Y. Yu, J. Hou, Z. Dong, C. Wang, F. Lu et al., Evaluating the flammability performance of Portland cement-bonded particleboards with different cement-wood ratios using a cone calorimeter, J Fire Sci, vol.34, pp.199-211, 2016.

, ASTM E1354 -11b Standard test method for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter, 2013.

, ISQ5660-1: Reaction to fire tests -Heat release, smoke production and mass loss ratePart 1: Heat release rate, 2002.

V. D. Thi, M. Khelifa, M. Oudjene, M. El-ganaoui, and Y. Rogaume, Finite element analysis of heat transfer through timber elements exposed to fire, Eng Struct, vol.143, pp.11-21, 2017.

Q. Ma, R. Guo, Z. Zhao, Z. Lin, and K. He, Mechanical properties of concrete at high temperature-A review, Constr Build Mater, vol.93, pp.371-383, 2015.

G. Wakili, K. Hugi, E. Karvonen, L. Schnewlin, P. Winnefeld et al., Thermal behaviour of autoclaved aerated concrete exposed to fire, Cem Concr Compos, vol.62, pp.52-60, 2015.

V. Kodur, Properties of concrete at elevated temperatures. ISRN Civ Eng, 2014.

A. B. Kizilkanat, N. Yüzer, and N. Kabay, Thermo-physical properties of concrete exposed to high temperature, Constr Build Mater, vol.45, pp.157-61, 2013.

O. Arioz, Effects of elevated temperatures on properties of concrete, Fire Saf J, vol.42, pp.516-522, 2007.

U. Schneider, Concrete at high temperatures -A general review, Fire Saf J, vol.13, pp.55-68, 1988.

L. T. Phan, Fire performance of high-strength concrete: A report of the state-of-the-art, Natl Bur Stand, 1996.

, Eurocode 5 -Design of timber structures. Part 1-? ? General -Structural fire design, 1995.

B. Fredlund, Modelling of heat and mass transfer in wood structures during fire, Fire Saf J, vol.20, pp.39-69, 1993.

D. Blasi and C. , Analysis of Convection and Secondary Reaction Effects Within Porous Solid Fuels Undergoing Pyrolysis, Combust Sci Technol, vol.90, pp.315-340, 1993.

S. S. Alves and J. L. Figueiredo, A model for pyrolysis of wet wood

, Chem Eng Sci, vol.44, pp.2861-2869, 1989.

K. W. Ragland, D. J. Aerts, and A. J. Baker, Properties of wood for combustion analysis, Bioresour Technol, vol.37, pp.161-168, 1991.

W. C. Chan, M. Kelbon, and B. Krieger, Modelling and experimental verification of physical and chemical processes during pyrolysis of a large biomass particle, Fuel, vol.64, pp.1505-1513, 1985.

V. D. Thi, Modélisation du comportement au feu des structures en bois, 2017.

D. K. Shen, M. X. Fang, Z. Y. Luo, and K. F. Cen, Modeling pyrolysis of wet wood under external heat flux, Fire Saf J, vol.42, pp.210-217, 2007.

J. Wang, J. K. Carson, M. F. North, and D. J. Cleland, A new approach to modelling the effective thermal conductivity of heterogeneous materials

, Int J Heat Mass Transf, vol.49, pp.3075-83, 2006.

Y. Bai, T. Vallée, and T. Keller, Modeling of thermo-physical properties for FRP composites under elevated and high temperature, Compos Sci Technol, vol.67, pp.3098-109, 2007.

Y. Xu and D. D. Chung, Effect of sand addition on the specific heat and thermal conductivity of cement, Cem Concr Res, vol.30, pp.59-61, 2000.

. Abaqus, Finite Element Modelling Programme and Standard User's ?anual. V. 6.14. SIMULIA, 2016. Figure 5.1. Eco-chalet à l'IUT de ?ongwy

. Abaqus, Finite Element Modelling Programme and Standard User's Manual

, Comsol Multiphysics ® . V. 5.3, www.comsol.com, COMSOL AB

C. Rode, Report BYG DTU R-126: Moisture buffering of building materials, 2005.

D. K. Shen, M. X. Fang, Z. Y. Luo, and K. F. Cen, Modeling pyrolysis of wet wood under external heat flux, Fire Saf J, vol.42, pp.210-217, 2007.

A. B. Constatinos, G. G. Athina, G. Elena, M. Sevastianos, M. Yiannis et al., European residential buildings stock, energy consumption

. Fig, Contour plots for different stacking heights of: (a) the stress ? L , and (b) the lateral displacement, vol.18

M. Li, Composite Structures, vol.209, pp.13-22, 2019.

, energy savings. Build Environ, vol.42, pp.1298-314, 2007.

S. Amziane and M. Sonebi, Overview on bio-based building material made with plant aggregate, RILEM Tech Lett, vol.1, pp.31-39, 2016.

R. W. Wolfe and A. Gjinolli, Cement-bonded wood composites as an engineering material, Proc For Prod Soc, pp.84-91, 1997.

J. Reis, Fracture and flexural characterization of natural fiber-reinforced polymer concrete, Constr Build Mater, vol.20, pp.673-681, 2006.

V. Corinaldesi, A. Mazzoli, and R. Siddique, Characterization of lightweight mortars containing wood processing by-products waste, Constr Build Mater, vol.123, pp.281-290, 2016.

M. J. Morales-conde, C. Rodríguez-liñán, and P. Ma, Physical and mechanical properties of wood-gypsum composites from demolition material in rehabilitation works, Constr Build Mater, vol.114, pp.6-14, 2016.

I. Turku, A. Keskisaari, T. Kärki, A. Puurtinen, and P. Marttila, Characterization of wood plastic composites manufactured from recycled plastic blends, Compos Struct, vol.161, pp.469-76, 2017.

O. Väntsi and T. Kärki, Utilization of recycled mineral wood as filler in woopolypropylene composites, Constr Build Mater, vol.55, pp.220-226, 2014.

A. Keskisaari, S. Butylina, and T. Kärki, Use of construction and demolition wastes as mineral fillers in hybrid mood-polymer composites, J Appl Polym Sci, vol.133, issue.19, pp.1-7, 2016.

N. J. Gardner, Pressure of concrete on formwork -a review, ACI J, vol.82, issue.5, pp.744-53, 1985.

M. Arslan, Effects of drainer formworks on concrete lateral pressure, Constr Build Mater, vol.16, pp.253-262, 2002.

M. Arslan, O. ?im?ek, and . Suba?is, E ffects of formwork surface materials on concrete lateral pressure, Constr Build Mater, vol.19, pp.319-344, 2005.

I. Puente, A. Santilli, and A. Lopez, Lateral pressure over formwork on large dimension concrete blocks, Eng Struct, vol.32, pp.195-206, 2010.

A. Santilli, I. Puente, and A. Lopez, Rate of placement discussion for the validation of experimental models of fresh concrete lateral pressure in columns, Constr Build Mater, vol.24, pp.934-979, 2010.

A. Santilli, I. Puente, and A. Lopez, Rates of placement discussion for the validation of experimental models of fresh concrete lateral pressure in walls, Constr Build Mater, vol.25, pp.227-265, 2011.

W. Zhang, J. Huang, Z. Li, and H. Chun, An experimental study on the lateral pressure of fresh concrete in formwork, Constr Build Mater, vol.111, pp.450-60, 2016.

T. Proske, K. H. Khayat, A. Omran, and O. Leitzbach, Form pressure generated by fresh concrete: a review about practice in formwork design, Mater Struct, vol.47, pp.1099-113, 2014.

W. R. Anthony and P. J. Stainer, Concrete high rises offer many cost advantages, Concr Constr, vol.33, pp.452-458, 1988.

G. B. Kim, K. Pilakoutas, and P. Waldron, Development of thin FRP reinforced GFRC permanent formwork systems, Constr Build Mater, vol.22, issue.11, pp.2250-2259, 2008.

K. Y. Leung and Q. Cao, Development of pseudo-ductile permanent formwork for durable concrete structures, Mater Struct, vol.43, pp.993-1007, 2010.

C. Yu, The study of reinforced pseudo-ductile cementitious composite permanent formwork

R. Goyal, A. Mukherjee, and S. Goyal, An investigation on bond between FRP stay-in-place formwork and concrete, Constr Build Mater, vol.113, pp.741-51, 2016.

B. Huang, Q. Li, S. Xu, and C. Li, Development of reinforced ultra-high toughness cementitious composite permanent formwork: experimental study and Digital Image Correlation analysis, Compos Struct, vol.180, pp.892-903, 2017.

M. Li, A. Khennane, B. Brandelet, E. Ganaoui, M. Khelifa et al., Modelling of heat transfer through permanent formwork panels exposed to high temperatures, Constr Build Mater, vol.185, pp.166-74, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01897084

, Guide to formwork for concrete, pp.347-351, 2004.

, London: Construction Industry Research and Information Association, 1985.

, Pressure of fresh concrete on vertical formwork. Berlin: Deutsches Institut für Normung, DIN 18218, 1980.

. Can/csa-s269, 3: concrete formwork. CSA Group, 1992.

, Falsework -performance requirements and general design, 2008.

, Standard test methods for structural panels in flexure, ASTM Committee, 2002.

, Standard test methods for evaluation properties of wood-base fiber and particle panel materials. ASTM Committee, pp.1037-99, 1999.

M. Li, M. Khelifa, E. Ganaoui, and M. , Mechanical characterization of concrete containing wood shavings as aggregates, Int J Sustainable Built Environ, vol.6, pp.587-96, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01673540

S. D. Menezzi, C. Henrique, V. Gomes-de-castro, R. De-souza, and M. , Production and properties of a medium density wood-cement boards produced with oriented strands and silica fume, Maderas Ciencia y Tecnologia, vol.9, pp.105-120, 2007.

A. N. Papadopoulos, G. A. Ntalos, and I. Kakaras, Mechanical and physical properties of cement-bonded OSB, Holz Roh Werkst, vol.64, issue.6, pp.517-525, 2006.

. Abaqus, User manuals v. 6.14, dassault systems, Simulia Corp, 2016.

J. Lubliner, J. Oliver, S. Oller, and E. Onate, A plastic-damage model for concrete, Int J Solids Struct, vol.25, pp.299-326, 1989.

J. Lee and G. L. Fenves, Plastic-damage model for cyclic loading of concrete structures, J Eng Mech, vol.124, issue.8, pp.882-900, 1998.

P. Drucker, Soil mechanics and plastic analysis or limit design, Q Appl Math, vol.10, pp.157-65, 1952.

A. Gholampour and T. Ozbakkaloglu, Behavior of steel fiber-reinforced concrete-filled FRP tube columns: experimental results and a finite element model, Compos Struct, vol.194, pp.252-62, 2018.

Y. Debard and . Rdm6, Logiciel de calcul des structures en appliquant la résistance des matériaux, 2011.

M. Li, Composite Structures, vol.209, pp.13-22, 2019.

M. Li, M. Khelifa, and M. E. Ganaoui, Mechanical characterization of concrete containing wood shavings as aggregates, Int. J. Sustainable Built Environ, vol.6, pp.587-596, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01673540

A. B. Constatinos, G. G. Athina, G. Elena, M. Sevastianos, M. Yiannis et al., European residential buildings stock, energy consumption, emissions and potential energy savings, Build. Environ, vol.42, pp.1298-1314, 2007.

S. Amziane and M. Sonebi, Overview on bio-based building material made with plant aggregate, RILEM Tech. Lett, vol.1, pp.31-38, 2016.

R. W. Wolfe and A. Gjinolli, Cement-bonded wood composites as an engineering material, Proc. For. Prod. Soc, pp.84-91, 1997.

F. Pacheco-torgal and S. Jalali, Cementitious building materials reinforced with vegetable fibres. A review, vol.25, pp.575-581, 2011.

R. Siddique, Utilization of wood ash in concrete manufacturing, Resour. Conserv. Recycl, vol.67, pp.27-33, 2012.

A. U. Elinwa and Y. A. Mahmood, Ash from timber waste as cement replacement material, Cem. Concr. Compos, vol.24, issue.2, pp.219-222, 2002.

F. F. Udoeyo and P. U. Dashibil, Sawdust ash as concrete material, J. Mater. Civ. Eng, vol.14, issue.2, pp.173-176, 2002.

P. Turgut, Cement composites with limestone dust and different grades of wood sawdust, Build. Environ, vol.42, issue.11, pp.3801-3807, 2007.

A. Akkaoui, S. Caré, and M. Vandamme, Experimental and micromechanical analysis of the elastic properties of wood-aggregate concrete, Constr. Build. Mater, vol.134, pp.346-357, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01693237

K. A. Rim, A. Ledhem, O. Douzane, R. Dheilly, and M. Queneudec, Influence of the proportion of wood on the thermal and mechanical performances of clay cement-wood composites, Cem. Concr. Compos, vol.21, issue.4, pp.269-276, 1999.

V. Corinaldesi, A. Mazzoli, and R. Siddique, Characterization of lightweight mortars containing wood processing by-products waste, Constr. Build. Mater, vol.123, pp.281-289, 2016.

A. Bouguerra, O. Amiri, A. Aït-mokhtar, and M. B. Diop, Water sorptivity and pore structure of wood cementitious composites, Mag. Concr. Res, vol.54, issue.2, pp.103-112, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00312176

P. Coatanlem, R. Jauberthie, and F. , Lightweight wood chipping concrete durability, Constr. Build. Mater, vol.20, issue.9, pp.776-781, 2006.

M. Bederina, B. Laidoudi, A. Goullieux, M. M. Khenfer, A. Bali et al., Effect of the treatment of wood shavings on the physico-mechanical characteristics of wood sand concretes, Constr. Build. Mater, vol.23, issue.3, pp.1311-1315, 2009.

Z. Ahmad, N. Ahmad, A. Rahman, H. H. Ali, M. S. Abdul et al., Fire resistance performance of reinforced concrete column with embedded permanent formwork using wood wool panel, Appl. Mech. Mater, vol.661, pp.111-117, 2014.

A. Sadaoui and A. Khennane, Effect of transient creep on the behaviour of reinforced concrete columns in fire, Eng. Struct, vol.31, issue.9, pp.2203-2208, 2009.

V. K. Kodur, Fire resistance requirements for FRP structural members, Proceedings of the Annual Conference of the Canadian Society for Civil Engineering, pp.83-95, 2001.

M. Qin, R. Belarbi, A. Aït-mokhtar, and L. O. Nilsson, Coupled heat and moisture transfer in multi-layer building materials, Constr. Build. Mater, vol.23, issue.2, pp.967-975, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00384166

A. V. Luikov, Heat and Mass Transfer in Capillary-porous Bodies, pp.233-303, 1966.

H. M. Kunzel, Simultaneous Heat and Moisture Transport in Building Components: One and Two-dimensional Calculation Using Simple Parameters, 1995.

A. Evrard and A. Deherd, Hygrothermal performance of lime-hemp wall assemblies, Build. Phys, vol.34, issue.1, pp.5-25, 2010.

A. D. Tran-le, C. Maalouf, T. H. Mai, E. Wurtz, and F. Collet, Transient hygrothermal behavior of a hemp concrete building envelope, Energy Build, vol.42, issue.10, pp.1797-1806, 2010.

M. Fan, M. K. Ndikontar, X. Zhou, and J. N. Ngamveng, Cement-bonded composites made from tropical woods: compatibility of wood and cement, Constr. Build. Mater, vol.36, pp.135-140, 2012.

Z. Ahmad, L. S. Wee, and M. A. Fauzi, Mechanical properties of wood-wool cement composite board manufactured using selected malaysian fast grown timber species, ASM Sci. J, vol.5, pp.27-35, 2011.

A. Quiroga and I. Rintoul, Mechanical properties of hierarchically structured wood-cement composites, Constr. Build. Mater, vol.84, pp.253-260, 2015.

D. Taoukil, A. El-bouardi, F. Sick, A. Mimet, H. Ezbakhe et al., Moisture content influence on the thermal conductivity and diffusivity of woodconcrete composite, Constr. Build. Mater, vol.48, pp.104-115, 2013.

E. Gourlay, P. Glé, S. Marceau, C. Foy, and S. Moscardelli, Effect of water content on the acoustical and thermal properties of hemp concretes, Constr. Build. Mater, vol.139, pp.513-523, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01477169

L. Wang, S. S. Chen, D. C. Tsang, C. S. Poon, and K. Shih, Value-added recycling of construction waste wood into noise and thermal insulating cement-bonded particleboards, Constr. Build. Mater, vol.125, pp.316-325, 2016.

L. Wang, S. S. Chen, D. C. Tsang, C. S. Poon, and K. Shih, Recycling contaminated wood into eco-friendly particleboard using green cement and carbon dioxide curing, J. Clean. Prod, vol.137, pp.861-870, 2016.

A. Evrard and A. Deherd, Hygrothermal performance of lime-hemp wall assemblies, J. Build. Phys, vol.34, pp.5-25, 2010.

E. Sassoni, S. Manzi, A. Motori, M. Montecchi, and M. Canti, Novel sustainable hemp-based composites for application in the building industry: physical, thermal and mechanical characterization, Energy Build, vol.77, pp.219-226, 2014.

S. B. Park, M. Lee, D. W. Son, S. M. Lee, and J. I. Kim, Fire performance of carbonized medium density fiberboard manufactured at different temperatures, J. Wood Sci, vol.60, pp.74-79, 2014.

, Eurocode 5 -Design of Timber Structures, Part 1-2: General -Structural Fire Design, 1995.

K. Wakili, E. Ghazi, L. Hugi, P. Karvonen, F. Schnewlin et al., Thermal behavior of autoclaved aerated concrete exposed to fire, Cem. Concr. Compos, vol.62, pp.52-58, 2015.

Q. Ma, R. Guo, Z. Zhao, Z. Lin, and K. He, Mechanical properties of concrete at high temperature -a review, Constr. Build. Mater, vol.93, pp.371-383, 2015.

H. Bal, Y. Jannot, S. Gaye, and F. Demeurie, Measurement and modelisation of the thermal conductivity of a wet composite porous medium: laterite based bricks with millet waste additive, Constr. Build. Mater, vol.41, pp.586-593, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01430700

Y. Jannot, B. Remy, and A. Degiovanni, Measurement of thermal conductivity and thermal resistance with a tiny hot plate, vol.39, pp.11-31, 2010.

D. K. Shen, M. X. Fang, Z. Y. Luo, and K. F. Cen, Modeling pyrolysis of wet wood under external heat flux, Fire Saf, J, vol.42, pp.210-217, 2007.

Y. Bai, T. Vallée, and T. Keller, Modeling of thermo-physical properties for FRP composites under elevated and high temperature, Compos. Sci. Technol, vol.67, pp.3098-3109, 2007.

Y. Xu and D. D. Chung, Effect of sand addition on the specific heat and thermal conductivity of cement, Cem. Concr. Res, vol.30, pp.59-61, 2000.

. Abaqus, Finite Element Modelling Program and Standard User's Manual, V. 6.14, Simulia, 2016.