. Ii, Modélisation par élément fini de l'usinage des structures en nid d'abeilles

, Mise en données de la simulation 3D

, Loi de comportement et critères de rupture adoptés

, Résultats de la simulation de l'usinage du nid d'abeilles

, Comparaison et validation des modèles

, II.3. Cas de l'usinage du nid d'abeilles

, Résultats de la simulation de l'usinage du nid d'abeilles en aluminium, p.153

, Endommagement des parois en aluminium et mécanismes de formation de copeaux

, Comparaison et validation des de la simulation numérique

.. .. Iii.-conception-d'une-nouvelle-géométrie-d'outil,

D. Gay, Matériaux composites, 1997.

P. Cognard, Collage des composites -Secteur aéronautique, 2012.

J. Guillemot, Les composites en construction ferroviaire, pp.1-2, 2000.

M. Reyne, Les composites dans les sports et les loisirs, vol.33, pp.1-2, 1998.

P. Cognard, Collage des matériaux -Applications, Tech. l'Ingénieur, vol.7617, pp.1-12, 2003.

R. Tounsi, Comportement des structures en nids d'abeilles sous sollicitations dynamiques mixtes compression / cisaillement et effet de l'orientation des cellules, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01002421

G. D. Caserta, L. Iannucci, and U. Galvanetto, Shock absorption performance of a motorbike helmet with honeycomb reinforced liner, Compos. Struct, vol.93, pp.2748-2759, 2011.

B. Castanié, C. Bouvet, and D. Guedra-degeorges, Structures en matériaux composites stratifiés, vol.33, pp.1-18, 2014.

M. Châtain, Matériaux composites: présentation générale, Tech. l'ingénieur, 2001.

P. Pachaly, Clofenvinphos, Dtsch. Apotheker Zeitung, vol.130, issue.85, pp.90127-90132, 1990.

R. Pinzelli, Fibres aramides pour matériaux composites, 1995.

T. Bitzer, Honeycomb Technology, 1997.

L. Suwannarungsri and W. Tanthapanichakoon, Test production of honeycomb structure using simple practical equipment, Proc. MS, 2006.

, Hexcel Composites, Honeycomb Attributes and Properties, A comprehensive guide to standard Hexcel honeycomb materials configurations and mechanical properties, Honeycomb Data Sheets, pp.1-40, 1999.

. Hexcel, Honeycomb sandwich design technology, HexWeb Honeycomb Sandw, Des. Technol, pp.1-28, 2000.

L. Gornet, S. Marguet, and G. Marckmann, Modeling of Nomex® Honeycomb Cores, Linear and Nonlinear Behaviors, Adv. Mater. Struct, vol.14, pp.589-601, 2007.

Y. Wang, Elastic collapse of honeycombs under out-of-plane pressure, Int. J. Mech. Sci, vol.33, pp.637-644, 1991.

J. Suh and D. G. Lee, Thermal characteristics of composite sandwich structures for machine tool moving body applications, Compos. Struct, vol.66, pp.429-438, 2004.

R. Seemann and D. Krause, Numerical modelling of nomex honeycomb cores for detailed analyses of sandwich panel joints, 11th World Congr, Comput. Mech. (WCCM XI, 2014.

L. J. Gibson and M. F. Ashby, Cellular solids: Structure and properties, 1997.

A. J. Lamb, Experimental investigation and numerical modelling of composite-honeycomb materials used in Formula 1 crash structures, 2007.

L. L. Hu and T. X. Yu, Dynamic crushing strength of hexagonal honeycombs, Int. J. Impact Eng, vol.37, pp.467-474, 2010.

Z. W. Wang and Y. P. , Mathematical modelling of energy absorption property for paper honeycomb in various ambient humidities, Mater. Des, vol.31, pp.4321-4328, 2010.

S. D. Papka and S. Kyriakides, Biaxial crushing of honeycombs Part I : Experiments, Int. J. Solids Struct, vol.36, pp.4367-4396, 1999.

S. Marguet, Contribution à la modélisation du comportement mécanique des structures sandwichs soumises à l'impact, Thèse, 2011.

G. Lu, Experimental investigation of the mechanical behavior of aluminum honeycombs under quasi-static and dynamic indentation, J. Mater, 2015.

T. D. Hinnerichs, T. G. Carne, W. Lu, E. C. Stasiunas, M. K. Neilsen et al., Characterization of Aluminum Honeycomb and Experimentation for Model Development and Validation Development and Validation, 2006.

J. Chung and A. M. Waas, Compressive Response of Honeycombs Under In-Plane Uniaxial Static and Dynamic Loading, Part 1: Experiments, AIAA J, vol.40, pp.966-973, 2002.

W. Goldsmith and D. L. Louie, Axial perforation of aluminum honeycombs by projectiles, Int. J. Solids Struct, vol.32, pp.1017-1046, 1995.

W. Goldsmith and J. L. Sackman, An experimental study of energy absorption in impact on sandwich plates, Int. J. Impact Eng, vol.12, pp.90447-90449, 1992.

L. Hu, F. You, and T. Yu, Analyses on the dynamic strength of honeycombs under the y-directional crushing, Mater. Des, vol.53, pp.293-301, 2014.

Y. Liu and X. C. Zhang, The influence of cell micro-topology on the in-plane dynamic crushing of honeycombs, Int. J. Impact Eng, vol.36, pp.98-109, 2009.

D. S. Kim and J. R. Lee, Compressive Mechanical Properties of the Nomex / Thermoset Honeycomb Cores, vol.8, pp.1-7, 1997.

M. R. Khoshravan and M. Najafi-pour, Numerical and experimental analyses of the effect of different geometrical modelings on predicting compressive strength of honeycomb core, vol.84, pp.423-431, 2014.

S. T. Hong, J. Pan, T. Tyan, and P. Prasad, Dynamic crush behaviors of aluminum honeycomb specimens under compression dominant inclined loads, Int. J. Plast, vol.24, pp.89-117, 2008.

G. Caserta, U. Galvanetto, and L. Iannucci, Static and dynamic energy absorption of aluminum honeycombs and polymeric foams composites, Adv. Mater. Struct, vol.17, pp.366-376, 2010.

A. Zinno, A. Prota, E. D. Maio, and C. E. Bakis, Experimental characterization of phenolicimpregnated honeycomb sandwich structures for transportation vehicles, Compos. Struct, vol.93, pp.2910-2924, 2011.

M. Mahmoudabadi and M. Sadighi, A theoretical and experimental study on metal hexagonal honeycomb crushing under quasi-static and low velocity impact loading, Mater. Sci. Eng. A, vol.528, pp.4958-4966, 2011.

A. J. Lamb, A. K. Pickett, and F. Chaudoye, Experimental characterisation and numerical modelling of hexagonal honeycomb cellular solids under multi-axial loading, Strain, vol.47, 2011.

T. Wierzbicki, Crushing analysis of metal honeycombs, Int. J. Impact Eng, vol.1, pp.157-174, 1983.

E. Wu and W. Jiang, Axial crush of metallic honeycombs, Int. J. Impact Eng, vol.19, pp.439-456, 1997.

S. Hong and J. Pan, Quasi-static crush behavior of aluminum honeycomb specimens under compression dominant combined loads, vol.22, pp.73-109, 2006.

L. Liu, H. Wang, and Z. Guan, Experimental and numerical study on the mechanical response of Nomex honeycomb core under transverse loading, Compos. Struct, vol.121, pp.304-314, 2015.

M. K. Khan, T. Baig, and S. Mirza, Experimental investigation of in-plane and out-of-plane crushing of aluminum honeycomb, Mater. Sci. Eng. A, vol.539, pp.135-142, 2012.

J. Zhang and M. F. Ashby, The out-of-plane properties of honeycombs, Int. J. Mech. Sci, vol.34, pp.475-489, 1992.

S. Deqiang, Z. Weihong, and W. Yanbin, Mean out-of-plane dynamic plateau stresses of hexagonal honeycomb cores under impact loadings, Compos. Struct, vol.92, pp.2609-2621, 2010.

S. Xu, J. H. Beynon, D. Ruan, and G. Lu, Experimental study of the out-of-plane dynamic compression of hexagonal honeycombs, Compos. Struct, vol.94, pp.2326-2336, 2012.

S. Kilchert, Nonlinear finite element modelling of degradation and failure in folded core composite sandwich structures, Thesis, 2013.

K. A. Fujimoto and M. Isomura, Dynamic and static compression tests for paper honeycomb cores and absorbed energy, JSME Int. J. Ser. A, vol.41, pp.338-344, 1989.

S. Keshavanarayana and M. V. Thotakuri, Off-axis compression behaviour of honeycomb core in WT-plane, Int. J. Crashworthiness, vol.14, pp.173-181, 2009.

S. D. Papka and S. Kyriakides, In-plane compressive response and crushing of honeycomb, J. Mech. Phys. Solids, vol.42, pp.1499-1532, 1994.

H. Zhao and G. Gary, Crushing Behaviour of Aluminium Honeycombs Under Impact Loading, Int. J. Impact Eng, vol.21, pp.827-836, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00111604

X. Zhang, H. Zhang, and Z. Wen, Experimental and numerical studies on the crush resistance of aluminum honeycombs with various cell configurations, Int. J. Impact Eng, vol.66, pp.48-59, 2014.

Y. Yasui, Dynamic axial crushing of multi-layer honeycomb panels and impact tensile behavior of the component members, Int. J. Impact Eng, vol.24, pp.174-182, 2000.

J. K. Paik, A. K. Thayamballi, and G. S. Kim, The strength characteristics of aluminum honeycomb sandwich panels, Thin-Walled Struct, vol.35, pp.26-35, 1999.

A. A. Nia and M. Z. Sadeghi, The effects of foam filling on compressive response of hexagonal cell aluminum honeycombs under axial loading-experimental study, Mater. Des, vol.31, pp.1216-1230, 2010.

Z. Bai, H. Guo, B. Jiang, F. Zhu, and L. Cao, A study on the mean crushing strength of hexagonal multi-cell thin-walled structures, Thin-Walled Struct, vol.80, pp.38-45, 2014.

S. D. Pan, L. Z. Wu, Y. G. Sun, Z. G. Zhou, and J. L. Qu, Longitudinal shear strength and failure process of honeycomb cores, Compos. Struct, vol.72, pp.42-46, 2006.

S. Pan, L. Wu, and Y. Sun, Transverse shear modulus and strength of honeycomb cores, vol.84, pp.369-374, 2008.

H. S. Lee, S. H. Hong, J. R. Lee, and Y. K. Kim, Mechanical behavior and failure process during compressive and shear deformation of honeycomb composite at elevated temperatures, J. Mater. Sci, vol.37, pp.1265-1272, 2002.

A. Petras, Design of Sandwich Structures, Thesis, 1998.

M. Doyoyo and D. Mohr, Microstructural response of aluminum honeycomb to combined out-ofplane loading, vol.35, pp.865-876, 2003.

M. Doyoyo and T. Wierzbicki, Experimental studies on the yield behavior of ductile and brittle aluminum foams, Int. J. Plast, vol.19, pp.1195-1214, 2003.

C. Yuan, M. Li, Z. Zhang, and Y. Gu, Experimental investigation on the Co-cure processing of honeycomb structure with self-adhesive prepreg, Appl. Compos. Mater, vol.15, pp.47-59, 2008.

S. Heimbs, Sandwichstrukturen mit Wabenkern: Experimentelle und numerische Analyse des Schädigungsverhaltens unter statischer und kurzzeitdynamischer Belastung, Institut für Verbundwerkstoffe GmbH, 2008.

B. Hou, A. Ono, S. Abdennadher, S. Pattofatto, Y. L. Li et al., Impact behavior of honeycombs under combined shear-compression. Part I: Experiments, Int. J. Solids Struct, vol.48, pp.698-705, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00580832

D. Mohr and M. Doyoyo, Deformation-induced folding systems in thin-walled monolithic hexagonal metallic honeycomb, Int. J. Solids Struct, vol.41, pp.3353-3377, 2004.

Z. Wang, Q. Qin, S. Chen, X. Yu, H. Li et al., Compressive crushing of novel aluminum hexagonal honeycombs with perforations: Experimental and numerical investigations, Int. J. Solids Struct, vol.0, pp.1-9, 2017.

M. A. Nasir, Z. Khan, I. Farooqi, S. Nauman, S. Anas et al., Transverse shear behavior of a nomex core for sandwich panels, Mech. Compos. Mater, vol.50, pp.733-738, 2015.

R. Tounsi, B. Zouari, F. Chaari, E. Markiewicz, G. Haugou et al., Thin-Walled Structures Reduced numerical model to investigate the dynamic behaviour of honeycombs under mixed shear -compression loading, Thin Walled Struct, vol.73, pp.290-301, 2013.

S. R. Keshavanarayana, H. Shahverdi, A. Kothare, C. Yang, and J. Bingenheimer, The effect of node bond adhesive fillet on uniaxial in-plane responses of hexagonal honeycomb core, Compos. Struct, vol.175, pp.111-122, 2017.

G. Bianchi, G. S. Aglietti, and G. Richardson, Static and fatigue behaviour of hexagonal honeycomb cores under in-plane shear loads, Appl. Compos. Mater, vol.19, pp.97-115, 2012.

W. Y. Jang and S. Kyriakides, On the buckling and crushing of expanded honeycomb, Int. J. Mech. Sci, vol.91, pp.81-90, 2015.

Z. Zhang, B. Han, Q. Zhang, and F. Jin, Free vibration analysis of sandwich beams with honeycomb-corrugation hybrid cores, Compos. Struct, vol.171, pp.335-344, 2017.

M. R. Nasution, N. Watanabe, and A. Kondo, Numerical study on thermal buckling of CFRP-Al honeycomb sandwich composites based on homogenization-localization analysis, Compos. Struct, vol.132, pp.709-719, 2015.

P. Lhuissier and L. Laszczyk, Caractérisation des structures sandwich, 2012.

S. M. Hosseini and U. Gabbert, Numerical simulation of the Lamb wave propagation in honeycomb sandwich panels: A parametric study, Compos. Struct, vol.97, pp.189-201, 2013.

V. Manet, The use of ANSYS to calculate the behaviour of sandwich structures, Compos. Sci. Technol, vol.58, pp.1899-1905, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00659205

P. Kang, S. K. Youn, and J. H. Lim, Modification of the critical projectile diameter of honeycomb sandwich panel considering the channeling effect in hypervelocity impact, Aerosp. Sci. Technol, vol.29, pp.413-425, 2013.

W. Huang, W. Zhang, D. Li, N. Ye, W. Xie et al., Dynamic failure of honeycomb-core sandwich structures subjected to underwater impulsive loads, Eur. J. Mech. A/Solids, vol.60, pp.39-51, 2016.

B. Tie, B. Y. Tian, and D. Aubry, Theoretical and numerical modeling of membrane and bending elastic wave propagation in honeycomb thin layers and sandwiches, J. Sound Vib, vol.382, pp.100-121, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01349289

R. A. Mines, S. Tsopanos, Y. Shen, R. Hasan, and S. T. Mckown, Drop weight impact behaviour of sandwich panels with metallic micro lattice cores, Int. J. Impact Eng, vol.60, pp.120-132, 2013.

D. Mohr and M. Doyoyo, Nucleation and propagation of plastic collapse bands in aluminum honeycomb, J. Appl. Phys, vol.94, pp.2262-2270, 2003.

V. N. Burlayenko and T. Sadowski, Effective elastic properties of foam-filled honeycomb cores of sandwich panels, Compos. Struct, vol.92, pp.2890-2900, 2010.

M. Grediac, A finite element study of the transverse shear in honeycomb cores, Int. J. Solids Struct, vol.30, issue.93, p.90233, 1993.

B. Hou, H. Zhao, S. Pattofatto, J. G. Liu, and Y. L. Li, Inertia effects on the progressive crushing of aluminium honeycombs under impact loading, Int. J. Solids Struct, vol.49, pp.2754-2762, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01549252

S. D. Papka and S. Kyriakides, Experiments and full-scale numerical simulations of in-plane crushing of a honeycomb, Acta Mater, vol.46, issue.97, pp.453-462, 1998.

K. Qiu, W. Ming, L. Shen, Q. An, and M. Chen, Study on the cutting force in machining of aluminum honeycomb core material, Compos. Struct, vol.164, pp.58-67, 2017.

G. Zhu, S. Li, G. Sun, G. Li, and Q. Li, On design of graded honeycomb filler and tubal wall thickness for multiple load cases, vol.109, pp.377-389, 2016.

G. Sun, S. Li, Q. Liu, G. Li, and Q. Li, Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes, Compos. Struct, vol.152, pp.969-993, 2016.

B. Han, K. Qin, B. Yu, B. Wang, Q. Zhang et al., Honeycomb-corrugation hybrid as a novel sandwich core for significantly enhanced compressive performance, Mater. Des, vol.93, pp.271-282, 2016.

Q. Liu, X. Xu, J. Ma, J. Wang, Y. Shi et al., Lateral crushing and bending responses of CFRP square tube filled with aluminum honeycomb, Compos. Part B Eng, vol.118, pp.104-115, 2017.

S. Santosa and T. Wierzbicki, Crash behavior of box columns filled with aluminum honeycomb or foam, Comput. Struct, vol.68, pp.343-367, 1998.

C. C. Foo, G. B. Chai, and L. K. Seah, A model to predict low-velocity impact response and damage in sandwich composites, Compos. Sci. Technol, vol.68, pp.1348-1356, 2008.

Á. J. Mancha, Optimization of lightweight sandwich structures of commercial aircraft interior parts subjected to low-velocity impact, 2012.

I. Ivañez, M. M. Moure, S. K. Garcia-castillo, and S. Sanchez-saez, The oblique impact response of composite sandwich plates, Compos. Struct, vol.133, pp.1127-1136, 2015.

S. Zhu and G. B. Chai, Damage and failure mode maps of composite sandwich panel subjected to quasi-static indentation and low velocity impact, Compos. Struct, vol.101, pp.204-214, 2013.

R. Roy, J. H. Kweon, and J. H. Choi, Meso-scale finite element modeling of Nomex honeycomb cores, Adv. Compos. Mater, vol.23, pp.17-29, 2014.

R. Seemann and D. Krause, Numerical Modeling of Nomex Honeycomb Sandwich Cores at MesoScale Level, Compos. Struct, 2016.

R. Roy, S. Park, J. Kweon, and J. Choi, Characterization of Nomex honeycomb core constituent material mechanical properties, Compos. Struct, vol.117, pp.255-266, 2014.

S. Heimbs, Virtual testing of sandwich core structures using dynamic finite element simulations, Comput. Mater. Sci, vol.45, pp.205-216, 2009.

S. Fischer, K. Drechsler, S. Kilchert, and A. Johnson, Mechanical tests for foldcore base material properties, Compos. Part A, vol.40, pp.1941-1952, 2009.

R. Roy, K. H. Nguyen, Y. B. Park, J. H. Kweon, and J. H. Choi, Testing and modeling of Nomex TM honeycomb sandwich Panels with bolt insert, Compos. Part B, vol.56, pp.762-769, 2014.

Y. Tsujii, K. Tanaka, and Y. Nishida, Analysis of Mechanical Properties of Aramid Honeycomb Core, Trans. Jap. Soc. Mech. Eng, vol.61, pp.1608-1614, 1995.

C. T. Sun, B. J. Quinn, and J. Tao, Comparative Evaluation of Failure Analysis Methods for Composite Laminates, 1996.

L. Lasri, Modélisation macromécanique et micromécanique de l'usinage des composites à matrice polymèere et fibres longues, Thèse, École Nationale Supérieure d'Arts et Métiers, 2009.

L. Gornet, Généralités sur les matériaux composites, Cours l'archive Ouvert, Pluridiscip. HAL, 2008.

M. Tchír, A comparative study of ultimate load and stiffness of metal-to-composite joints, Thesis, Brno university of technology, 2016.

H. Sun and X. Qiao, Prediction of the Mechanical Properties of 3-D Braided Composite, Compos. Sci. Technol, vol.57, pp.623-629, 1997.

L. Zhao, T. Qin, Y. Chen, and J. Zhang, Three-dimensional progressive damage models for cohesively bonded composite joint, J. Compos. Mater, vol.48, pp.707-721, 2014.

K. I. Tserpes, G. Labeas, P. Papanikos, and T. Kermanidis, Strength prediction of bolted joints in graphite/epoxy composite laminates, Compos. Part B Eng, vol.33, pp.33-34, 2002.

F. Paris and K. E. Jackson, A study of failure criteria of fibrous composite materials, 2001.

F. Guo-dong, L. Jun, and W. Bao-lai, Progressive damage and nonlinear analysis of 3D fourdirectional braided composites under unidirectional tension, Compos. Struct, vol.89, pp.126-133, 2009.

J. Berthelot, Mécanique des Matériaux et Structures Composites, 2010.

S. Zenia, Modélisation numérique de l'usinage des matériaux composites à matrice polymère et fibres longues de carbone, 2017.

S. Heimbs and F. Strobl, Crash simulation of an F1 racing car front impact structure, 7th Eur. LS-DYNA Conf, pp.1-8, 2009.

A. Dessarthe, Usinage des composites à matrice polymère, 1999.

, Cutting Tools for aircraft manufacturers and MRO companies, 2012.

. Lmt and . Onsrud, Milling and Drilling Tools for composite and Honeycomb Materials, 2010.

E. Tools, Outils coupants pour usinage du composite et du nid d'abeille, 2010.

M. M. Mendoza, K. F. Eman, and S. M. Wu, Development of a new milling cutter for aluminium honeycomb, Int. J. Mach. Tool Des. Res, vol.23, pp.81-91, 1983.

F. Seco, . Carbure, . Hautes, . Pour, and . Composites, , 2010.

W. C. Lund and D. E. Pedersen, Milling cutter for honeycomb core material, p.4907920, 1990.

H. S. Norvilie, C. Madera, and E. Tibor, Process for machining expanded honeycomb, 1968.

J. S. Nilsen and O. Wadsworth, Method and apparatus for machining and for holding during machining honeycomb material, p.2905064, 1959.

C. G. Griffith and T. A. , Method of machining honeycomb core, p.2855664, 1958.

R. Carl, Three-dimensional honeycomb core machining apparatus and method, US Pat, vol.670, p.1, 2012.

A. Hirayama, M. For, P. Honeycomb-core, and . Number, , pp.6740268-6740270, 1991.

R. Thiagaraj, R. M. Chris, J. R. Mccullough, and S. Mishra, Method of repairing, splicing, joining, machining, and stabilizing honeycomb core using pourable structural foam and a structure incorporating the same, 2014.

Y. V. Nasedkin, V. F. Tsarev, and I. V. Zelenina, Cutting of aramide fiber-reinforced plastics by Co2 laser, Mech. Compos. Mater, vol.35, pp.259-264, 1999.

D. Geng, D. Zhang, Y. Xu, F. He, D. Liu et al., Rotary ultrasonic elliptical machining for side milling of CFRP: Tool performance and surface integrity, Ultrasonics, vol.59, pp.128-137, 2015.

M. K. Khairusshima, C. H. , and C. Hassan, Md Idriss, Effect of chilled air on tool wear and workpiece quality during milling of carbon fibre-reinforced plastic, Wear, vol.302, pp.1113-1123, 2013.

R. Zitoune, M. E. Mansori, and V. Krishnaraj, Tribo-functional design of double cone drill implications in tool wear during drilling of copper mesh/CFRP/woven ply, Wear, vol.302, pp.1560-1567, 2013.
URL : https://hal.archives-ouvertes.fr/hal-02180336

M. Haddad, R. Zitoune, H. Bougherara, F. Eyma, and B. Castanié, Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior, Compos. Part B Eng, vol.57, pp.136-143, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01952584

M. Saleem, L. Toubal, R. Zitoune, and H. Bougherara, Investigating the effect of machining processes on the mechanical behavior of composite plates with circular holes, Compos. Part A Appl. Sci. Manuf, vol.55, pp.169-177, 2013.

R. Teti, Machining of Composite Materials, CIRP Ann. -Manuf. Technol, vol.51, pp.611-634, 2002.

Y. Karpat, O. Bahtiyar, and B. Deger, Mechanistic force modeling for milling of unidirectional carbon fiber reinforced polymer laminates, Int. J. Mach. Tools Manuf, vol.56, pp.79-93, 2012.

M. Haddad, R. Zitoune, F. Eyma, and B. Castanie, Study of the surface defects and dust generated during trimming of CFRP : Influence of tool geometry , machining parameters and cutting speed range, Compos. PART A, vol.66, pp.142-154, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01952583

A. Dessarthe, Usinage des composites, Tech. L'INGÉNIEUR, 1997.

M. Comte, Documentation technique de produits -Arêtes de forme non définie -Indication et cotation, NF ISO 13715, 2017.

T. Régnier and B. Marcon, Etude de la formation des bavures en coupe orthogonale à l'outil carbure dans un alliage d'Aluminium -Silicium, 9èmes Assises MUGV2016, 2016.

, Découpage et emboutissage -Bavures des pièces métalliques découpées ou poinçonnées -Hauteur maximale admissible des bavures et méthode de mesurage, 2012.

K. Ramesh and H. Han, The effects of grinding wheel speed on burr creation and surface quality, Met. Finish, vol.101, pp.57-61, 2003.

A. Tiabi, Formation des bavures d'usinage et finition de pièces, École de technologie supérieure Montréal, 2010.

W. Shefelbine and D. Dornfeld, The Effect of Dry Machining on Burr Size, 2004.

D. A. Dornfeld, J. S. Kim, H. Dechow, J. Hewson, and L. J. Chen, Drilling Burr Formation in Titanium Alloy, Ti-6AI-4V, CIRP Ann. -Manuf. Technol, vol.48, pp.63134-63139, 1999.

D. Dornfeld and S. Min, A Review of Burr Formation in Machining, 2010.

L. C. Silva, P. R. Da-mota, M. B. Silva, E. O. Ezugwu, and A. R. Machado, Study of burr behavior in face milling of PH 13-8 Mo stainless steel, CIRP J. Manuf. Sci. Technol, vol.8, pp.34-42, 2015.

A. A. Thakre and S. Soni, Modeling of burr size in drilling of aluminum silicon carbide composites using response surface methodology, Eng. Sci. Technol. an Int. J, vol.19, pp.1199-1205, 2016.

J. Kim and Y. Kang, High-spend machining of aluminium using diamond endmills, Int. J. Mach. Tools Manuf, vol.37, pp.1155-1165, 1995.

G. Chern, Experimental observation and analysis of burr formation mechanisms in face milling of aluminum alloys, Int. J. Mach. Tools Manuf, vol.46, pp.1517-1525, 2006.

T. Régnier, G. Fromentin, J. Outeiro, B. Marcon, A. D. et al., Experimental Investigation and Modelling of Burr Formation during Orthogonal Cutting of A356+0.5Cu Aluminium Alloy, Thirteen. Int. Conf. HIGH SPEED Mach, 2016.

S. Kundu, S. Das, and P. P. Saha, Optimization of drilling parameters to minimize burr by providing back-up support on aluminium alloy, Procedia Eng, pp.230-240, 2014.

S. A. Niknam, Burrs understanding, modeling and optimization during slot milling of aluminium alloys, Thesis, École de technologie supérieure université du Québec, 2013.

S. A. Niknam, Y. Zedan, and V. Songmene, Machining Burrs Formation & Deburring of Aluminium Alloys, 2014.

D. Iliescu, Approches expérimentale et numérique de l'usinage a sec des composites carbone/époxy, École Nationale Supérieure d'Arts et Métiers, 2008.

P. Guegan, Contribution à la qualification de l'usinage de matériaux composites à matrice organique, E.C. Nantes, 1994.

M. Haddad, Étude de l'impact des défauts d'usinage des structures composites par détourage sur leur comportement mécanique, 2013.

R. Sreenivasulu, Optimization of surface roughness and delamination damage of GFRP composite material in end milling using taguchi design method and artificial neural network, Procedia Eng, vol.64, pp.785-794, 2013.

S. Sakamoto, Y. Kajiwara, and H. Yasui, Precision drilling of cfrp (carbon fiber reinforced plastics) with coated tools, Annu. Meet. Am. Soc. Precis. Eng. ASPE, 2007.

W. Wolfgang, D. Hartmann, and C. , Sch??tte, Occurrence and propagation of delamination during the machining of carbon fibre reinforced plastics (CFRPs) -An experimental study, Compos. Sci. Technol, vol.71, pp.1719-1726, 2011.

M. K. Khairusshima, A. K. Aqella, and I. S. Sharifah, Optimization of Milling Carbon Fibre Reinforced Plastic Using RSM, Procedia Eng, vol.184, pp.518-528, 2017.

R. Zitoune, L. Crouzeix, F. Collombet, T. Tamine, and Y. Grunevald, Behaviour of composite plates with drilled and moulded hole under tensile load, Compos. Struct, vol.93, pp.2384-2391, 2011.

L. M. Durão, D. J. Gonçalves, J. M. Tavares, and V. H. De-albuquerque, Torres Marques, Drilling tool geometry evaluation for reinforced composite laminates, Compos. Struct, vol.92, pp.1545-1550, 2010.

R. Q. Sardiñas, P. Reis, and J. P. Davim, Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms, Compos. Sci. Technol, vol.66, pp.3083-3088, 2006.

T. Sunny, J. Babu, and J. Philip, Experimental Studies on Effect of Process Parameters on Delamination in Drilling GFRP Composites Using Taguchi Method, Procedia Mater. Sci, vol.6, pp.1131-1142, 2014.

K. Palanikumar, Experimental investigation and optimisation in drilling of GFRP composites, Meas. J. Int. Meas. Confed, vol.44, pp.2138-2148, 2011.

S. M. Grove, E. Popham, and M. E. Miles, An investigation of the skin/core bond in honeycomb sandwich structures using statistical experimentation techniques, Compos. Part A Appl. Sci. Manuf, vol.37, pp.804-812, 2006.

H. Tchoutouo and N. Gandy, Adhesiveless Honeycomb Sandwich Structure With Carbon Graphite Prepreg for Primary Structural Application: a Comparative Study To the Use of Adhesive Film, Thesis, 2012.

S. Khan, Bonding of Sandwich Structures -The Facesheet/Honeycomb Interface -A Phenomenological Study, Sampe, p.9, 2007.

J. Rion, Y. Leterrier, and J. E. Månson, Prediction of the adhesive fillet size for skin to honeycomb core bonding in ultra-light sandwich structures, Compos. Part A, vol.39, pp.1547-1555, 2008.

H. E. Chandler, Machining of Metal-Matrix Composites and Honeycomb Structures, ASM Handb, vol.16, pp.893-901, 1989.

M. Subramanian, M. Sakthivel, K. Sooryaprakash, and R. Sudhakaran, Optimization of cutting parameters for cutting force in shoulder milling of Al7075-T6 using response surface methodology and genetic algorithm, Procedia Eng, vol.64, pp.690-700, 2013.

M. C. Santos, A. R. Machado, W. F. Sales, M. A. Barrozo, and E. O. Ezugwu, Machining of aluminum alloys: a review, Int. J. Adv. Manuf. Technol, vol.86, pp.3067-3080, 2016.

D. S. Kilic and S. Raman, Observations of the tool-chip boundary conditions in turning of aluminum alloys, Wear, vol.262, pp.889-904, 2007.

I. Zaghbani and V. Songmene, A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys, J. Mater. Process. Technol, vol.209, pp.2532-2544, 2009.

M. Y. Tsai, S. Y. Chang, J. P. Hung, and C. C. Wang, Investigation of milling cutting forces and cutting coefficient for aluminum 6060-T6, Comput. Electr. Eng, vol.51, pp.320-330, 2016.

N. Grossi, L. Sallese, A. Scippa, and G. Campatelli, Speed-varying cutting force coefficient identification in milling, Precis. Eng, vol.42, pp.321-324, 2015.

N. Rajesh-mathivanan, B. S. Mahesh, and H. Shetty, An experimental investigation on the process parameters influencing machining forces during milling of carbon and glass fiber laminates, Meas. J. Int. Meas. Confed, vol.91, pp.39-45, 2016.

R. Vinayagamoorthy, S. V. Bhaskar, and B. B. Kumar, Experimental investigations on end milling of natural jute fiber reinforced composites, Int. Conf. Recent Adv. Mech. Eng, pp.1-6, 2012.

F. D. Ning, W. L. Cong, Z. J. Pei, and C. Treadwell, Rotary ultrasonic machining of CFRP: A comparison with grinding, Ultrasonics, vol.66, pp.125-132, 2016.

A. G. Bratukhin and V. S. Bogolyubov, Composite Manufacturing Technology, 1995.

T. Elgnemi, K. Ahmadi, V. Songmene, J. Nam, and M. B. Jun, Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite, J. Manuf. Process, vol.30, pp.133-140, 2017.

H. Hocheng, H. Y. Puw, and Y. Huang, Preliminary study on milling of unidirectional carbon fibrereinforced plastics, Compos. Manuf, vol.4, pp.103-108, 1993.

M. P. Jenarthanan and R. , Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method, Int. J. Eng. Sci. Technol, vol.5, pp.23-36, 2013.

J. P. Davim, P. Reis, and C. Conceic, A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis ( ANOVA ), Compos. Struct, vol.64, pp.493-500, 2004.

T. Chung-chen and H. Hong, Comparison of the tool life of tungsten carbides coated by multi-layer TiCN and TiAlCN for end mills using the Taguchi method, vol.123, pp.6-9, 2002.

L. L. Hu, X. L. He, G. P. Wu, and T. X. Yu, Dynamic crushing of the circular-celled honeycombs under out-of-plane impact, Int. J. Impact Eng, vol.75, pp.150-161, 2015.

L. Aktay, A. F. Johnson, and B. H. Kröplin, Numerical modelling of honeycomb core crush behaviour, Eng. Fract. Mech, vol.75, 2008.

D. Grau, Relating interfacial fracture toughness to core thickness in honeycomb-core sandwich composites, 2003.

M. Davis, M. J. Chester, R. J. Perl, D. R. Pomerleau, and E. , Vallerand, Honeycomb bond and core durability issues; experiences within credp nation, Aging Aircr. Conf, 1998.

M. J. Davis and D. A. Bond, The importance of failure mode identification in adhesive bonded aircraft structures and repairs, ISASI Aust. Saf. Semin. Canb Erra, pp.1-12, 2010.

A. Rider, The Durability of Metal-Honeycomb Sandwich Structure Exposed to High Humidity Conditions, Def. Sci. Technol. Organ. VICTORIA Aeronaut. Marit. Res. LAB, 2002.

H. Zhao, I. Elnasri, and S. Abdennadher, An experimental study on the behaviour under impact loading of metallic cellular materials, Int. J. Mech. Sci, vol.47, pp.757-774, 2005.

, HM Wire International. inc, Aluminum 5056-0, p.5056, 2010.

J. Y. Sheikh-ahmad, Machining of polymer composites, 2009.

F. Dolatabadi, Étude de l'influence du mode de lubrification sur les performances d'usinage du composite à matrices d'aluminium étude de l'influence du mode de lubrification sur les performances d'usinage du composite à matrices d'aluminium, 2010.

G. Petrone, S. Rao, S. Rosa, B. R. Mace, F. Franco et al., Behaviour of fibrereinforced honeycomb core under low velocity impact loading, Compos. Struct, vol.100, pp.356-362, 2013.

J. A. Ghani, I. A. Choudhury, and H. H. Hassan, Application of Taguchi method in the optimization of end milling parameters, vol.145, pp.84-92, 2004.

M. S. Sukumar, P. Venkata-ramaiah, and A. Nagarjuna, Optimization and prediction of parameters in face milling of Al-6061 using taguchi and ANN approach, Procedia Eng, vol.97, pp.365-371, 2014.

V. Krishnaraj, R. Zitoune, and F. Collombet, Study of drilling of multi-material (CFRP/Al) using Taguchi and statistical techniques, Usak Univ, J. Mater. Sci, vol.1, pp.95-109, 2012.

K. Palanikumar, Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling, Int. J. Adv. Manuf. Technol, vol.36, pp.19-27, 2008.

B. M. Gopalsamy, B. Mondal, and S. Ghosh, Taguchi method and anova: An approach for process parameters optimization of hard machining while machining hardened steel, J. Sci. Ind. Res. (India), vol.68, pp.686-695, 2009.

M. S. Shahrom, N. M. Yahya, and A. R. Yusoff, Taguchi method approach on effect of lubrication condition on surface roughness in milling operation, Procedia Eng, vol.53, pp.594-599, 2013.

P. M. George, B. K. Raghunath, L. M. Manocha, and A. M. Warrier, EDM machining of carboncarbon composite -a Taguchi approach, vol.145, p.863, 2004.

R. Voss, L. Seeholzer, F. Kuster, and K. Wegener, Influence of fibre orientation, tool geometry and process parameters on surface quality in milling of CFRP, CIRP J. Manuf. Sci. Technol, vol.18, pp.75-91, 2017.

S. Zenia, L. Ben-ayed, M. Nouari, and A. Delamézière, Numerical analysis of the interaction between the cutting forces , induced cutting damage , and machining parameters of CFRP composites, pp.465-480, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01417909

M. Dursapt, Aide-mémoire de métrologie dimensionnelle, 2009.

, Polymer Matrix Composites -Guidelines for Characterisation of Structural Materials, Composite Materials Handbook, vol.1, pp.1-586, 2002.

W. Abu-ain, S. Norul, H. Sheikh, B. Bataineh, T. Abu-ain et al., Skeletonization Algorithm for Binary Images, Procedia Technol, vol.11, pp.704-709, 2013.

G. Klette, Skeletons in Digital Image Processing, 2002.

J. P. Davim and P. Reis, Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments, J. Mater. Process. Technol, vol.160, pp.160-167, 2005.

S. B. Sahare, S. P. Untawale, S. S. Chaudhari, R. L. Shrivastav, and P. D. Kamble, Experimental investigation of end milling operation on Al2024, Mater. Today Proc, vol.4, pp.1357-1365, 2017.

T. P. Mahesh and R. Rajesh, Optimal Selection of Process Parameters in CNC End Milling of Al 7075-T6 Aluminium Alloy Using a Taguchi-fuzzy Approach, Procedia Mater. Sci, vol.5, pp.2493-2502, 2014.

S. Moshat, S. Datta, A. Bandyopadhyay, and P. , Optimization of CNC end milling process parameters using PCA-based Taguchi method, Int. J. Eng. Sci. Technol, vol.2, pp.95-102, 2010.

R. Zitoune, B. S. Bouacif, F. Collombet, V. Krishnaraj, O. Zindulka et al., Etude de la qualité d'usinage lors du perçage d'un multi-matériau de type CFRP/Aluminium, JNC, vol.17, 2011.

M. Ramulu, C. W. Wern, and J. L. Garbini, Effect of fibre direction on surface roughness measurements of machined graphite/epoxy composite, Compos. Manuf, vol.4, pp.39-51, 1993.

S. Rawat and H. Attia, Wear mechanisms and tool life management of WC-Co drills during dry high speed drilling of woven carbon fibre composites, Wear, vol.267, pp.1022-1030, 2009.

A. Faraz, D. Biermann, and K. Weinert, Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates, Int. J. Mach. Tools Manuf, vol.49, pp.1185-1196, 2009.

K. H. Park, A. Beal, D. D. Kim, P. Kwon, and J. Lantrip, Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools, Wear, vol.271, pp.2826-2835, 2011.

Y. Aminanda, B. Castanie, J. J. Barrau, and P. Thevenet, Experimental and numerical study of compression after impact of sandwich structures with metallic skins, Compos. Sci. Technol, vol.69, pp.50-59, 2009.
URL : https://hal.archives-ouvertes.fr/hal-02025736

C. C. Foo, G. B. Chai, and L. K. Seah, Mechanical properties of Nomex material and Nomex honeycomb structure, Compos. Struct, vol.80, pp.588-594, 2007.

Y. Aminanda, B. Castani, J. J. Barrau, and P. Thevenet, Experimental analysis and modeling of the crushing of honeycomb cores, Appl. Compos. Mater, pp.213-227, 2005.
URL : https://hal.archives-ouvertes.fr/hal-02025694

F. Hähnel and K. Wolf, Simulation of the damage tolerance behaviour of CFRP/Honeycomb sandwich based on measured properties of the resin impregnated core paper, Proc. 13th Int. Conf. Compos. Mater. Stock. (208AD), pp.2-4

D. Asprone, F. Auricchio, C. Menna, S. Morganti, A. Prota et al., Statistical finite element analysis of the buckling behavior of honeycomb structures, Compos. Struct, vol.105, pp.240-255, 2013.

P. F. Liu and J. Y. Zheng, Progressive failure analysis of carbon fiber/epoxy composite laminates using continuum damage mechanics, Mater. Sci. Eng. A, vol.485, pp.711-717, 2008.

G. S. Padhi, R. A. Shenoi, S. S. Moy, and G. L. Hawkins, Progressive failure and ultimate collapse of laminated composite plates in bending, Compos. Struct, vol.40, pp.30-30, 1997.

K. S. Gemkow and R. Vignjevic, Strain-softening in continuum damage models : Investigation of MAT _ 058, 2013.

G. Perillo, Numerical application of three-dimensional failure criteria for laminated composite materials, SIMULIA Cust. Conf, pp.1-15, 2011.

S. Zenia, L. Ben-ayed, M. Nouari, and A. Delamézière, Numerical prediction of the chip formation process and induced damage during the machining of carbon/epoxy composites, Int. J. Mech. Sci, vol.90, pp.89-101, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01417911

S. Zenia, L. Ben-ayed, M. Nouari, and A. Delamézière, An elastoplastic constitutive damage model to simulate the chip formation process and workpiece subsurface defects when machining CFRP composites, Procedia CIRP, vol.31, pp.100-105, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01417915

L. Lasri, M. Nouari, and M. E. Mansori, Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept, Compos. Sci. Technol, vol.69, pp.684-692, 2009.

D. H. Wang, M. Ramulu, and D. Arola, Orthogonal cutting mechanisms of graphite/epoxy composite. Part I: unidirectional laminate, Int. J. Mach. Tools Manuf, vol.35, pp.1623-1638, 1995.

R. Zitoune, F. Collombet, F. Lachaud, R. Piquet, and P. Pasquet, Experiment-calculation comparison of the cutting conditions representative of the long fiber composite drilling phase, Compos. Sci. Technol, vol.65, pp.455-466, 2005.

R. Voß, M. Henerichs, F. Kuster, and K. Wegener, Chip root analysis after machining carbon fiber reinforced plastics (CFRP) at different fiber orientations, Procedia CIRP, vol.14, pp.217-222, 2014.

X. M. Wang and L. C. Zhang, An experimental investigation into the orthogonal cutting of unidirectional fibre reinforced plastics.pdf, Int. J. Mach. Tools Manuf, vol.43, pp.1015-1022, 2003.

G. B. Chai and S. Zhu, A Review of Low-velocity Impact on Sandwich Structures, pp.1-54

V. Crupi, G. Epasto, E. Guglielmino, H. Mozafari, and S. Najafian, Computed tomography-based reconstruction and finite element modelling of honeycomb sandwiches under low-velocity impacts, J. Sandw. Struct. Mater, vol.16, pp.377-397, 2014.

S. Ryan, Hypervelocity Impact Induced Disturbances on Composite Sandwich, 2007.

G. R. Johnson and W. H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng. Fract. Mech, vol.21, issue.85, pp.90052-90061, 1985.

L. Kruszka and J. Janiszewski, Experimental analysis and constitutive modelling of steel of A-IIIN strength class, EPJ Web Conf, vol.94, p.5007, 2015.

K. Vedantam, D. Bajaj, N. S. Brar, and S. Hill, Johnson -Cook strength models for mild and DP 590 steels, AIP Conf. Proc. 845 I, pp.775-778, 2006.

G. T. Camacho and M. Ortiz, Adaptive Lagrangian modelling of ballistic penetration of metallic targets, Comput. Methods Appl. Mech. Eng, vol.142, issue.96, pp.1134-1140, 1997.

H. Abdulhamid, A. Kolopp, C. Bouvet, and S. Rivallant, Experimental and numerical study of AA5086-H111 aluminum plates subjected to impact, Int. J. Impact Eng, vol.51, pp.1-12, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01853227

A. H. Clausen, T. Børvik, O. S. Hopperstad, and A. Benallal, Flow and fracture characteristics of aluminium alloy AA5083-H116 as function of strain rate, temperature and triaxiality, Mater. Sci. Eng. A, vol.364, pp.260-272, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01718241

K. U. , LS-DYNA® Keyword User'S Manual, 2012.

A. Kolopp, R. A. Alvarado, S. Rivallant, and C. Bouvet, Modeling impact on aluminium sandwich including velocity effects in honeycomb core, J. Sandw. Struct. Mater, vol.15, pp.733-757, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01853146

A. Kolopp, Impact sur structures sandwiches pour application de blindage aéronautique, 2012.

P. Liu, Y. Liu, and X. Zhang, Internal-structure-model based simulation research of shielding properties of honeycomb sandwich panel subjected to high-velocity impact, Int. J. Impact Eng, vol.77, pp.1-14, 2015.