J. C. Hui-juan-dai, M. Gebelin, . Newell, N. Reed, P. D. Souza et al., Grain selection during solidification in spiral grain selector, vol.367, 2008.

T. E. Quested, Solidification of Inoculated Aluminium Alloys, 2004.

H. Rosenthal, C. R. Heine, and . Loper, Principles of metal casting, pp.123-149, 1967.

A. L. Greer, Grain refinement in rapidly solidified alloys, Materials Science and Engineering : A, vol.133, pp.16-21, 1991.

I. Egry, . Brooks, R. Holland-moritz, T. Novakovic, E. Matsushita et al., Thermophysical properties of ?-titanium aluminide : the european impress project, International journal of Thermophysics, vol.28, issue.3, pp.1026-1036, 2007.

H. Robert and . Doremus, Viscosity of silica, Journal of Applied Physics, vol.92, issue.12, pp.7619-7629, 2002.

G. Kurtuldu, Influence of Trace Elements on the Nucleation and Solidification Morphologies of fcc Alloys and Relationship with Icosahedral Quasicrystal Formation, 2014.

T. Campanella, C. Charbon, and M. Rappaz, Grain refinement induced by electromagnetic stirring : a dendrite fragmentation criterion, Metallurgical and Materials Transactions A, vol.35, issue.10, pp.3201-3210, 2004.

. Vt-witusiewicz, . Bondar, . Hecht, T. Rex, and . Velikanova, The al-b-nb-ti system : Iii. thermodynamic re-evaluation of the constituent binary system al-ti, Journal of alloys and compounds, vol.465, issue.1-2, pp.64-77, 2008.

J. Zollinger, Influence de l'oxygène sur le comportement à la solidification d'aluminiures de titane binaires et alliés au niobium basés sur le composé intermétallique ?-TiAI, 2008.

G. Boussinot, . Brener, and . De-temkin, Kinetics of isothermal phase transformations above and below the peritectic temperature : Phase-field simulations, Acta Materialia, vol.58, issue.5, pp.1750-1760, 2010.

J. K. Mackenzie, Second paper on statistics associated with the random disorientation of cubes, Biometrika, vol.45, pp.229-240, 1958.

Y. Du and R. Schmid-fetzer, Thermodynamic modeling of the al-ta system, Journal of phase equilibria, vol.17, issue.4, pp.311-324, 1996.

D. Turnbull, Formation of crystal nuclei in liquid metals, Journal of Applied Physics, vol.21, issue.10, pp.1022-1028, 1950.

C. James, . Baker, and . John-w-cahn, Thermodynamics of solidification. The Selected Works of John W. Cahn, pp.253-288, 1998.

G. Lesoult, Thermodynamique des matériaux : de l'élaboration des matériaux à la genèse des microstructures, PPUR Presses polytechniques, vol.5, 2010.

L. Battezzati and A. L. Greer, The viscosity of liquid metals and alloys, Acta Metallurgica, vol.37, issue.7, pp.1791-1802, 1989.

W. John, J. E. Cahn, and . Hilliard, Free energy of a nonuniform system. i. interfacial free energy, The Journal of chemical physics, vol.28, issue.2, pp.258-267, 1958.

N. Eustathopoulos, J. Joud, and P. Desré, Tension interfaciale des métaux purs-i.-estimation des tensions superficielles liquide-vapeur et solide-vapeur à partir de l'énergie de cohésion, Journal de Chimie Physique, vol.70, pp.42-48, 1973.

N. Eustathopoulos, J. Joud, and P. Desré, Tension interfaciale des métaux purs-estimation des tensions interfaciales solide-vapeur et solide-liquide à partir de la tension superficielle du métal liquide, Journal de Chimie Physique, vol.70, pp.49-53, 1973.

N. Saunders and . Miodownik, Evaluation of glass forming ability in binary and ternary metallic alloy systems-an application of thermodynamic phase diagram calculations, Materials science and technology, vol.4, issue.9, pp.768-777, 1988.

J. William and R. Mehl, Reaction kinetics in processes of nucleation and growth, Trans. Metall. Soc. AIME, vol.135, pp.416-442, 1939.

L. Svanberg, L. Ahrné, N. Lorén, and E. Windhab, Effect of sugar, cocoa particles and lecithin on cocoa butter crystallisation in seeded and non-seeded chocolate model systems, Journal of Food Engineering, vol.104, issue.1, pp.70-80, 2011.

M. Doru and . Stefanescu, Science and engineering of casting solidification, 2015.

D. Turnbull and B. Vonnegut, Nucleation catalysis. Industrial & Engineering Chemistry, vol.44, pp.1292-1298, 1952.

L. Bruce and . Bramfitt, The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron, Metallurgical Transactions, vol.1, issue.7, pp.1987-1995, 1970.

M. Zhang and P. M. Kelly, Crystallography and morphology of widmanstätten cementite in austenite, Acta materialia, vol.46, issue.13, pp.4617-4628, 1998.

M. Gennesson, Étude expérimentale de la mise en place des structures de solidification dans les lingots d'acier, 2018.

A. Ghosh, Secondary steelmaking : principles and applications, 2000.

D. John, M. Schwarzkopf, . Sommerfeld, T. Clayton, Y. Crowe et al., Multiphase flows with droplets and particles, 2011.

Ø. Grong, L. Kolbeinsen, C. Van-der, G. Eijk, and . Tranell, Microstructure control of steels through dispersoid metallurgy using novel grain refining alloys, ISIJ international, vol.46, issue.6, pp.824-831, 2006.

J. Lacaze, N. Castro, G. Aichoun, and . Lesoult, Influence de la vitesse de refroidissement sur la microstructure et la cinétique de solidification de fontes gs : Expérience et simulation numérique de solidification dirigée, Mémoires et Etudes Scientifiques Revue de Métallurgie, vol.2, pp.85-97, 1989.

T. E. Quested and A. L. Greer, Athermal heterogeneous nucleation of solidification, Acta Materialia, vol.53, issue.9, pp.2683-2692, 2005.

F. Frank, Supercooling of liquids, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, vol.215, pp.43-46, 1120.

T. Schenk, V. Holland-moritz, . Simonet, D. M. Bellissent, and . Herlach, Icosahedral short-range order in deeply undercooled metallic melts, Physical review letters, vol.89, issue.7, p.75507, 2002.

. Kf-kelton, . Lee, . Kt-gangopadhyay, . Hyers, . Tj-rathz et al., First x-ray scattering studies on electrostatically levitated metallic liquids : Demonstrated influence of local icosahedral order on the nucleation barrier, Physical Review Letters, vol.90, issue.19, p.195504, 2003.

G. Kurtuldu, P. Jarry, and M. Rappaz, Influence of icosahedral short range order on diffusion in liquids : A study on alzn-cr alloys, Acta Materialia, vol.115, pp.423-433, 2016.

A. Pasturel and . Jakse, Influence of cr on local order and dynamic properties of liquid and undercooled al-zn alloys, The Journal of Chemical Physics, vol.146, issue.18, p.184502, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01914061

. Ka-jackson, . Hunt, T. P. Dr-uhlmann, and . Seward, On the origin of the equiaxed zone in castings, Trans. Metall. Soc. AIME, vol.236, issue.2, pp.139-149, 1966.

G. Hansen, . Hellawell, R. S. Lu, and . Steube, Some consequences of thermosolutal convection : the grain structure of castings, Metallurgical and Materials Transactions A, vol.27, issue.3, pp.569-581, 1996.

M. Moukassi, Influence du brassage du métal liquide sur le déroulement de la solidification des alliages métalliques : application à la formation de la zone équiaxe dans la coulée continue, 1988.

. Cj-paradies, . Smith, and . Glicksman, The influence of convection during solidification on fragmentation of the mushy zone of a model alloy, Metallurgical and Materials Transactions A, vol.28, issue.3, pp.875-883, 1997.

C. Merton and . Flemings, Solidification processing, Metallurgical transactions, vol.5, issue.10, pp.2121-2134, 1974.

G. Lesoult, J. P. Neu, and . Birat, Modelling of equiaxed solidification induced by electromagnetic stirring on a steel continuous caster, Metallurgical Applications of Magnetohydrodynamics, pp.164-179, 1982.

D. Ruvalcaba, . Rh-mathiesen, . Dg-eskin, L. Arnberg, and . Katgerman, In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy, Acta Materialia, vol.55, issue.13, pp.4287-4292, 2007.

E. Liotti, . Lui, . Vincent, Z. Kumar, . Guo et al., A synchrotron x-ray radiography study of dendrite fragmentation induced by a pulsed electromagnetic field in an al-15cu alloy, Acta Materialia, vol.70, pp.228-239, 2014.

N. Shevchenko, . Roshchupkina, S. Sokolova, and . Eckert, The effect of natural and forced melt convection on dendritic solidification in gain alloys, Journal of Crystal Growth, vol.417, pp.1-8, 2015.

H. Yasuda, N. Yamamoto, . Nakatsuka, M. Nagira, . Yoshiya et al., In situ observation of nucleation, fragmentation and microstructure evolution in sn-bi and al-cu alloys, International Journal of Cast Metals Research, vol.21, issue.1-4, pp.125-128, 2008.

G. Zimmermann, M. Pickmann, . Hamacher, H. Schaberger-zimmermann, K. Neumann-heyme et al., Fragmentation-driven grain refinement in directional solidification of alcu10wt-% alloy at low pulling speeds, Acta Materialia, vol.126, pp.236-250, 2017.

B. Cantor, Heterogeneous nucleation and adsorption, Philosophical Transactions of the Royal Society of London. Series A : Mathematical, Physical and Engineering Sciences, vol.361, pp.409-417, 1804.

. Fm-kuni, A. I. Shchekin, B. Rusanov, and . Widom, Role of surface forces in heterogeneous nucleation on wettable nuclei, Advances in colloid and interface science, vol.65, pp.71-124, 1996.

A. Kumar, M. Zalo?nik, and H. Combeau, Study of the influence of mushy zone permeability laws on macro-and mesosegregations predictions, International Journal of Thermal Sciences, vol.54, pp.33-47, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01709362

S. Wang, Formation des microstructures dans la fonte à graphite spheroïdal aux premiers instants de la solidification, 2012.

N. Reilly, Hétérogénéités de fabrication des aluminiures de titane : caractérisation et maîtrise de leurs formations en coulée centrifuge, 2016.

T. Billotte, Caractérisation et modélisation des structures de solidification en soudage TIG d'alliages austénitiques, 2017.

R. Jacob and . Kennedy, Développement d'une nouvelle génération d'inoculants pour affinage du grain dans les aluminiures de titane élaborés par fonderie, 2018.

. Wg-burgers, On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium, Physica, pp.561-586, 1934.

. Mj-blackburn, Some aspects of phase transformation in titanium alloys, 1970.

H. Mizukami, T. Suzuki, W. Umeda, and . Kurz, Initial stage of rapid solidification of 18-8 stainless steel, Materials Science and Engineering : A, vol.173, issue.1-2, pp.361-364, 1993.

L. Ladeuille, Formation des microstructures et des microségrégations intragranulaires en solidification initiale des aciers au cuivre, 2001.

G. Jeanmaire, Précipitation des nitrures d'aluminium (AlN) dans un acier maraging à très faible teneur en azote : influence de la déformation plastique à chaud, 2015.

P. J. Michael-d-abràmoff, . Magalhães, J. Sunanda, and . Ram, Image processing with imagej. Biophotonics international, vol.11, issue.7, pp.36-42, 2004.

E. Boehm-courjault, . Gonzales, . Jacot, . Kohler, C. Mariaux et al., Ebsd : a powerful microstructure analysis technique in the field of solidification, Journal of microscopy, vol.233, issue.1, pp.160-169, 2009.

J. Fundenberger, E. Bouzy, . Goran, . Guyon, H. Morawiec et al., Transmission kikuchi diffraction (tkd) via a horizontally positioned detector, Microscopy and Microanalysis, vol.21, issue.S3, pp.1101-1102, 2015.

J. Zollinger, D. Adam, and . Daloz, Microstructure formation during solidification of melt-spun co-fe-mn-si alloys, IOP Conference Series : Materials Science and Engineering, vol.27, p.12078, 2012.

. Jo-andersson, L. H. Helander, . Hoglund, B. Shi, and . Sundman, THERMO-CALC & DICTRA, computational tools for materials science, Calphad, vol.26, issue.2, pp.273-312, 2002.

A. T. Dinsdale, Sgte data for pure elements, Calphad, vol.15, issue.4, pp.317-425, 1991.

M. Hillert, The compound energy formalism, Journal of Alloys and Compounds, vol.320, issue.2, pp.161-176, 2001.

E. Scheil, Bemerkungen zur schichtkristallbildung, Zeitschrift für Metallkunde, vol.34, issue.3, pp.70-72, 1942.

P. A. Bibby and . Beech, Solidification behaviour of low-alloy steel castings, Journal of the Iron and Steel Institute, vol.211, pp.290-292, 1973.

J. Sn-tiwari and . Beech, The role of the peritectic reaction in the formation of the equiaxed zone in iron base alloys, Transactions of the Iron and Steel Institute of Japan, vol.21, issue.8, pp.554-558, 1981.

T. Campanella, C. Charbon, and M. Rappaz, Influence of permeability on the grain refinement induced by forced convection in copperbase alloys, Scripta materialia, vol.49, issue.10, pp.1029-1034, 2003.

C. Philip-crosbie, Fluid flow through granular beds, Trans. Inst. Chem. Eng, vol.15, pp.150-166, 1937.

P. Peng, X. Li, J. Li, Y. Su, J. Guo et al., On migration of primary/peritectic interface during interrupted directional solidification of sn-ni peritectic alloy, Scientific reports, vol.6, p.24512, 2016.

M. Bobadilla, Solidification des aciers inoxydables austénitiques : microségrégations et formation des structures, 1984.

P. Bouissou, Influence d'un ecoulement sur la croissance dendritique : aspect theorique et experimental, vol.6, 1989.

. Hunt, Steady state columnar and equiaxed growth of dendrites and eutectic, Materials science and engineering, vol.65, issue.1, pp.75-83, 1984.

. Me-hyman, . Mccullough, . Valencia, R. Levi, and . Mehrabian, Microstructure evolution in tial alloys with b additions : conventional solidification, Metallurgical Transactions A, vol.20, issue.9, p.1847, 1989.

L. Donald-e-larsen and . Christodoulou, Effect of xd? tib 2 volume fraction on the microstructure of a cast near-gamma titanium aluminide alloy, MRS Online Proceedings Library Archive, p.194, 1990.

M. Paninski, Development of a casting technology for complex tial components, Third International Workshop on ?-TiAl Technologies, pp.29-31, 2006.

. Tt-cheng, The mechanism of grain refinement in tial alloys by boron addition-an alternative hypothesis, Intermetallics, vol.8, issue.1, pp.29-37, 2000.

S. Tamirisakandala, . Bhat, . Db-miracle, . Boddapati, . Bordia et al., Effect of boron on the beta transus of ti-6al-4v alloy, Scripta materialia, vol.53, issue.2, pp.217-222, 2005.

V. Küstner, Untersuchungen zur Gefügebildung bei der Erstarrung von gamma-Titanaluminid-Legierungen unterschiedlicher Konstitution, 2003.

N. Gey and . Humbert, Characterization of the variant selection occurring during the ? ? ? ? ? phase transformations of a cold rolled titanium sheet, Acta materialia, vol.50, issue.2, pp.277-287, 2002.

. Vt-witusiewicz, . Bondar, T. Hecht, and . Velikanova, The al-b-nb-ti system : Iv. experimental study and thermodynamic reevaluation of the binary al-nb and ternary al-nb-ti systems, Journal of Alloys and Compounds, vol.472, issue.1-2, pp.133-161, 2009.

. Vt-witusiewicz, . Bondar, . Hecht, . Voblikov, . Os-fomichov et al., Experimental study and thermodynamic modelling of the ternary al-ta-ti system, Intermetallics, vol.19, issue.3, pp.234-259, 2011.

F. William, . Gale, C. Terry, and . Totemeier, Smithells metals reference book, 2003.

. Tr-malow and . Koch, Grain growth in nanocrystalline iron prepared by mechanical attrition, Acta Materialia, vol.45, issue.5, pp.2177-2186, 1997.

B. Cherukuri, R. Srinivasan, S. Tamirisakandala, and D. B. Miracle, The influence of trace boron addition on grain growth kinetics of the beta phase in the beta titanium alloy ti-15mo-2.6 nb-3al-0.2 si, Scripta Materialia, vol.60, issue.7, pp.496-499, 2009.

J. Hsu and M. Lin, Dissolution of solid particles in liquids, Journal of colloid and interface science, vol.141, issue.1, pp.60-66, 1991.

D. Gosslar, Kornfeinung borhaltiger Hochtemperatur-Leichtbaulegierungen auf Basis der intermetallischen Phase Gamma-TiAl, 2012.

S. Henry, Etude de la germination et de la croissance maclées dans les alliages d'aluminium, EPFL, 1999.

M. Bedel, G. Reinhart, A. Bogno, C. Gandin, S. Jacomet et al., Characterization of dendrite morphologies in rapidly solidified al-4.5 wt.% cu droplets, Acta Materialia, vol.89, pp.234-246, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01130102

T. Haxhimali, A. Karma, F. Gonzales, and M. Rappaz, Orientation selection in dendritic evolution, 660, 2006. 4 Distinctions 2008 IMPRESS Prize for young researcher 2008 décerné par l'Agence Spatiale Européenne 2012 -Auj. Projets Matériaux Métalliques (4A) 64h TD, vol.5

, Le principe de base restant d'aborder un panel de techniques de caractérisation, mais sous une approche projet avec des sujets plus proches des sujets de recherche encadrés par des tuteurs spécialistes. Ce travail pointu en petit groupe est très apprécié par nos étudiants, Ces projets ont remplacé les TP de métallurgie autrefois dispensés

. -auj, Cours de Métallurgie (Lic. Pro CND) 42h TD, ? 15 étudiants par an

, Ce cours aborde tous les aspects de la métallurgie, des diagrammes de phases aux propriétés mécaniques en passant par les transformations de phase. Il s'adresse à des étudiants issus de filières technique (BTS fonderie principalement) qui ont des bases à acquérir et consolider

, Participation aux enseignements 2011 -2013 Diffusion atomique (2A) 21h TD, chargé de TD 2011 -2013 Structures et défauts de structures (3A) 21h TD, chargé de TD 2011 -Auj. Transformations de phase (3A) 8h CM, 21h TD

, Après avoir participé aux TD et aidé à la construction de nouveaux exercices, j'ai également en charge depuis 2017 la partie de cours dédié à la solidification et aux transformations à l

, Administration de l'EEIGM : Définition de la stratégie de l'école (relations industrielles, internationales), modification du règlement de scolarité, Responsabilités pédagogiques, administratives et collectives 2013 -2017 Membre élu du Conseil d

. -auj, Chargé de Missions auprès de la Direction des Partenariat Industriels : Responsable des visites d'entreprises (1 à 3 visites par an, groupes de 20 étudiants, Président de jury des soutenances de stages industriels de 5ème année (?12 jurys/an)

. -auj, Responsable Pédagogique des Travaux Pratiques de Matériaux : Membre permanent de la commission des moyens, réalisation des entretiens annuels des personnels BIATTS en charge des TP matériaux

, 2018 -Auj. Responsable et animateur du pôle d'enseignement « Recherche et Développement » de l'EEIGM : 8 Modules d'enseignement recouvrant les 5 années (9 enseignants), membre permanent des comités d'enseignement et des jurys de fin d, Membre du Groupe de Travail sur les Relations Internationales (GTRI) de l'Institut Jean Lamour

, Animateur scientifique du Département de Sciences et Ingénierie des Matériaux et de Métallurgie de l'Institut Jean Lamour (? 60 personnes) : organisation d

, Publications avec comité de lecture (Facteur d'impact>1)

J. Zollinger, B. Rouat, J. Guyon, S. K. Pillai, and M. Rappaz, Influence of Ir additions and Icosahedral Short-Range Order (ISRO) on nucleation and growth kinetics, pp.2279-2288, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02050947

P. L. Weiss, J. Zollinger, P. Sallamand, E. Cicala, and E. Fleury, Microstructural study and mechanical properties of heterogeneous laser welding of ?, ? and ? + ? titanium alloys, Weld. World, vol.63, issue.1, pp.53-62, 2019.

L. P3-p.-lohmuller, A. Peltier, J. Hazotte, P. Zollinger, E. Laheurte et al., Variations of the elastic properties of the CoCrFeMnNi high entropy alloy deformed by groove cold rolling, Materials, vol.11, issue.8, p.1337, 2018.

D. P4-t.-billotte, B. Daloz, G. Rouat, J. R. Tirand, V. Kennedy et al., Zollinger, Microsegregation model including convection and tip undercooling : Application to directional solidification and welding, Materials, vol.11, issue.7, p.1252, 2018.

M. Gennesson, J. Zollinger, D. Daloz, B. Rouat, J. Demurger et al., Three-Dimensional Methodology to Characterize Large Dendritic Equiaxed Grains in Industrial Steel Ingots, Materials, vol.11, issue.6, p.1007, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02050983

J. R. P6, D. Kennedy, B. Daloz, E. Rouat, J. Bouzy et al., Effect of inoculant alloy selection on isomorphic inoculation of Ti-Al, Materials, vol.11, issue.5, p.666, 2018.

J. R. P7, D. Kennedy, B. Daloz, E. Rouat, J. Bouzy et al., Grain refinement in TiAl alloys by isomorphic self-inoculation, Intermetallics, vol.95, pp.89-93, 2018.

P. J. Zollinger, M. Escot, L. Deillon, B. Rouat, D. Daloz et al., Interface microstructure formation in Fe / Fe-Mn-C steel RSW joints, J. Mater. Process. Tech, vol.252, pp.697-704, 2018.

. T. P9-n, B. Reilly, G. Rouat, D. Martin, J. Daloz et al., Enhanced dendrite fragmentation through the peritectic reaction in TiAl-based alloys, Intermetallics, vol.86, pp.126-133, 2017.

S. P10-d.-aboudi, M. Lebaili, J. Taouinet, and . Zollinger, Microstructure evolution of diffusion welded 304L/Zircaloy4 with copper interlayer, Mater. Des, vol.116, pp.386-394, 2017.

J. P11-l.-deillon, D. Zollinger, M. Daloz, H. Zalo-?nik, and . Combeau, In-situ observations of solutal melting using laser scanning confocal microscopy : The Cu/Ni model system, Mater. Char, vol.97, pp.125-131, 2014.

. A. P12-a, V. T. Bondar, U. Witusiewicz, J. Hecht, T. Zollinger et al., The Al-B-Nb-Ti System. VI. Experimental studies and thermodynamic modeling of the constituent Al-B-Nb system, J. Alloys Compd, vol.587, pp.234-250, 2014.

P. J. Zollinger and D. Daloz, On the Sampling Methodology to Characterize Microsegregation, Mater. Char, vol.62, pp.1058-1065, 2011.

U. P14-d.-daloz, J. Hecht, H. Zollinger, A. Combeau, M. Hazotte et al., Microsegregation, macrosegregation and related phase transformation in TiAl alloys, Intermetallics, vol.19, pp.749-756, 2011.

. V. P15-a, V. V. Kartavykh, J. Tcherdyntsev, and . Zollinger, TiAlNb melt interaction with pyrolytic boron nitride crucibles, Mater. Chem. Phys, vol.119, pp.347-350, 2010.

. T. P16-v, A. A. Witusiewicz, J. Bondar, U. Zollinger, T. Hecht et al., Thermodynamic re-evaluation of the Al-Ta system, Intermetallics, vol.18, pp.92-106, 2010.

M. P17-j.-eiken, V. T. Apel, J. Witusiewicz, U. Zollinger, and . Hecht, Interplay between ?-(Ti) nucleation and growth during peritectic solidification investigated by phase-field simulations, J. Phys. : Condens. Matter, vol.21, p.464104, 2009.

A. V. Kartavykh, V. V. Tcherdyntsev, and J. Zollinger, Reaction mechanisms of AlN refractory crucibles with TiAl-Nb Melts, Mater. Chem. Phys, vol.116, pp.300-304, 2009.

. P19-d, M. Horwat, E. Dehmas, J. Aubry, S. Zollinger et al., Properties of nanocrystalline and amorphous WxZr1-x thin films deposited by cosputtering, Intermetallics, vol.17, pp.421-426, 2009.

. T. P20-v, A. A. Witusiewicz, U. Bondar, J. Hecht, L. V. Zollinger et al., The Al-B-Nb-Ti system V. Thermodynamic description of the ternary system Al-B-Ti, J. Alloys Compd, vol.474, pp.86-104, 2009.

P. J. Zollinger, Z. Gabalcová, D. Daloz, J. Lapin, and H. Combeau, Microsegregation induced microstructures in intermetallic Ti-46Al-8Nb alloy, Kovove Materialy, vol.46, pp.291-296, 2008.

. P22-u, V. Hecht, A. Witusiewicz, J. Drevermann, and . Zollinger, Grain refinement by low boron additions in niobium-rich TiAl-based alloys, Intermetallics, vol.16, pp.969-978, 2008.

P. J. Zollinger, J. Lapin, D. Daloz, and H. Combeau, Influence of oxygen on solidification behaviour of cast TiAl-based alloys, Intermetallics, vol.15, pp.1343-1350, 2007.

, Actes de congrès avec comité de lecture

J. Zollinger and M. Rappaz, Influence of Minor Additions on Icosahedral Short-Range Order (ISRO) and Its Consequences on Nucleation and Solidification Growth Kinetics in fcc Alloys, Trans. Indian Inst. Met, vol.71, pp.2635-2638, 2018.

D. C2-m.-gennesson, J. Daloz, J. Zollinger, D. Demurger, H. Poirier et al., Inoculation experiments in lab-scale castings of low alloyed steel, Proceedings of the 6th Decennial International Conference on Solidification Processing, pp.978-979, 2017.

J. R. C3, J. Kennedy, D. Zollinger, E. Daloz, and . Bouzy, Inoculation of Ti-Al by Ti-Al-(RM) Powder and its Grain Refinement Efficiency, Proceedings of the 6th Decennial International Conference on Solidification Processing, pp.978-979, 2017.

J. R. C4, J. H. Kennedy, J. Park, D. Zollinger, E. Daloz et al., Effects of Ti-Ta alloys additions on Ti-46Al castings, Proceedings of the COM17, Conference of Metallurgists, pp.978-979, 2017.

. T. C5-n, B. Reilly, G. Rouat, D. Martin, and . Daloz, Influence of Aluminium content and casting technology on the columnar to equiaxed transition in Ti-xAl-2Cr-2Nb alloys, Proceedings of the COM16, Conference of Metallurgists, 2016.

J. R. C6, J. Kennedy, D. Zollinger, B. Daloz, E. Rouat et al., Grain refinement of TiAl castings by isomorphic self-inoculation, Proceedings of the COM16, Conference of Metallurgists, 2016.

C. L. Weiss, J. Zollinger, P. Sallamand, E. Cicala, and E. Fleury, Microstructure and property of titanium heterogeneous laser welding, Proceedings of the 13th World Conference on Titanium, pp.317-321, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01513483

J. C8-t.-billotte, B. Zollinger, G. Rouat, V. Tirand, D. Robin et al., Grain selection during epitaxial growth of welded Nickel-based superalloys, Proceedings of the COM15, Conference of Metallurgists, pp.978-979, 2015.

C. J. Kennedy, J. Zollinger, S. Khallouk, D. Daloz, B. Rouat et al., Innovative grain refinement solutions for cast titanium aluminides, Proceedings of the COM15, Conference of Metallurgists, pp.978-979, 2015.

J. C10-k.-theuwissen, L. Lacaze, J. Laffont, D. Zollinger, and . Daloz, Effect of Ce and Sb on Primary Graphite Growth in Cast Irons, Trans. Indian Inst. Met, vol.65, pp.707-712, 2012.

C. J. Zollinger, O. Adam, and D. Daloz, Microstructure Formation during Solidification of Melt-Spun Co-Fe-Mn-Si Alloys, J. Phys. Conf, vol.27, p.12078, 2012.

M. Zaloznik, J. Zollinger, H. Combeau, U. Hecht, and D. Daloz, Observations expérimentales et modélisation de la macroségrégation en coulée centrifuge d'alliages Ti-Al-Nb, Rev. Metall.-Cah. Inf. Techn, vol.107, pp.449-456, 2010.

C. J. Zollinger, V. Witusiewicz, A. Drevermann, D. Daloz, and U. Hecht, Solidification of high Nb containing TiAl-based alloys, Int. J. Cast. Met. Res, vol.22, pp.339-342, 2009.

R. C14-d.-gosslar, C. Günther, R. Hartig, U. Bormann, J. Hecht et al., Grain Refinement of ?-TiAl Based Alloys by Inoculation, Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, vol.1128, pp.91-96, 2009.

C. U. Hecht, J. Zollinger, D. Daloz, V. Witusiewicz, J. Lapin et al., Solidification of TiAl-based Alloys, Advanced Intermetallic-Based Alloys for Extreme Environment and Energy Applications, vol.1128, pp.91-96, 2009.

C. U. Hecht, V. Witusiewicz, A. Drevermann, and J. Zollinger, Solidification of Nb-rich TiAl-based alloys : Grain refinement by boron additions and the role of peritectic growth, Structural Aluminides for Elevated Temperatures Symposium held at the TMS 2008 Annual Meeting and Exhibition, pp.189-196, 2008.

C. J. Zollinger, J. Lapin, D. Daloz, and H. Combeau, Microstructures and microsegregation formation in TiAl-based alloys containing niobium

. Jones, Proceedings of the 5th Decennial International Conference on Solidification Processing, p.282, 2007.

M. Rappaz and J. Zollinger, Influence de l'ordre icosaédral à courte distance dans le liquide sur la germination-croissance d'alliages fcc, 2018.

J. Zollinger and M. Rappaz, Influence of Minor Additions on Icosahedral Short-Range Order (ISRO) and Its Consequences on Nucleation and Solidification Growth Kinetics in fcc Alloys, International Conference on Solidification Science and Processing ICSSP-7, 2018.

J. Zollinger, Modeling of weld interface, ArcelorMittal Weld Simulation Seminar, 2017.

J. Zollinger, Grain refinement during solidification of metallic alloys : Processing and inoculation of TiAl-based alloys, FEMS Lecturer Awards, 2016.

A. Hazotte, D. Daloz, J. Zollinger, and E. Bouzy, Solidification and Solid Phase transformations in TiAl-based intermetallics, Journée Association Aéronautique et Astronautique de France 3AF -Palaiseau, 2015.

C. J. Zollinger, L. Deillon, M. Escot, A. Paunoiu, M. Aubrun et al., Journées Dissolution du GDR « Solidification des alliages métalliques, p.15, 2015.

C. J. Zollinger, Journées de la commission thématique Elaboration des alliages métalliques SF2M-SFGP, 5 Mars, 2015.

J. Zollinger, L. Deillon, B. Appolaire, D. Daloz, M. Zalo-?nik et al., Fusion solutale dans le système Cu-Ni : expériences et simulations, LSMX, 2014.

C. J. Zollinger, M. Escot, L. Deillon, B. Rouat, D. Daloz et al., L'apport des expériences de laboratoire sur la compréhension des phénomènes lors du soudage, 12èmes Journées Simulation Numérique du Soudage, Maison de la Mécanique, 2014.

K. Theuwissen, J. Lacaze, L. Laffont, J. Zollinger, and D. Daloz, Effect of Ce and Sb on Primary Graphite Growth in Cast Irons, 5th International Conference on Solidification Science and Processing, 2012.

J. Ci11-d.-daloz, M. Zollinger, H. Zaloznik, and . Combeau, Experimental determination and thermodynamic aspect, Workshop on Solidification : Solute Partition and Segregations of Multi-component Alloys, pp.21-25, 2012.

J. Ci12-d.-daloz and . Zollinger, Dissimilar welding : an experimental study of the Cu-Ni model system, Euromat Conference, 2011.

J. Zollinger and U. Hecht, Some key features in solidification of titanium aluminides, GKSS ?-TiAl workshop, 2008.

J. Zollinger and L. , Analyse Élémentaire en Métallurgie : Micro-Analyse par Sonde Électronique, 2008.

U. Hecht, J. Zollinger, M. Zaloznik, M. Cisternas, N. Reilly et al., GRAvity DEpendent Columnar-to-Equiaxed Transition in TiAl alloys : Part. II. Solidification of Ti-48Al-2Cr-2Nb in hyper gravity and multi-physics modelling, LDC Workshop, Noordwijk-aan-Zee, pp.25-26, 2018.

C. J. Zollinger, U. Hecht, C. Huang, M. Zaloznik, M. Cisternas et al., GRAvity DEpendent Columnar-to-Equiaxed Transition in TiAl alloys : Part. I. Solidification of Ti-46Al-8Nb in hyper gravity and multi-physics modelling, LDC Workshop, Noordwijkaan-Zee, pp.25-26, 2018.

J. Co3-d.-daloz, U. Zollinger, N. Hecht, A. Reilly, and . Viardin, The columnar-toequiaxed transition in peritectic TiAl-based alloys under hypergravity and microgravity conditions, ISPS-7 & ELGRA-25 Symposium, 2017.

. T. Co4-n, J. Reilly, G. Zollinger, C. Martin, D. Marcillaud et al., The effect of peritectic solidification on the CET in gamma-TiAl alloys, pp.20-24, 2015.

J. Co5-l.-deillon, B. Zollinger, D. Appolaire, M. Daloz, H. Zaloznik et al., Solutal melting : in-situ observations using laser confoncal microscopy and determination of interface composition, TMS, pp.16-20, 2014.

. T. Co6-n, J. Reilly, C. Zollinger, D. Marcillaud, and . Daloz, Influence of Aluminum Content on the Columnar-to-equiaxed Transition in Ti-Al-X Gamma Titanium Aluminides, TMS, pp.16-20, 2014.

J. Co7-l.-deillon, B. Zollinger, D. Appolaire, M. Daloz, H. Zaloznik et al., Fusion solutale dans le système Cu-Ni : observations in-situ et modélisation, pp.24-28, 2014.

C. J. Zollinger, M. Escot, B. Rouat, D. Daloz, . Th et al., Solute driven melting in dissimilar Fe/ Fe-Mn-C steels joints, Advanced Materials Research, vol.7, pp.20-21, 2013.

C. J. Zollinger, O. Adam, and D. Daloz, Solidification Microstructures of Melt-Spun Co-Fe-Mn(-Si) Alloys, 3rd International Conference on Advances in Solidification Processes ICASP-3, 2011.

U. Hecht, V. Witusiewicz, A. Drevermann, J. Eiken, and J. Zollinger, The BCC-HCP Transformation In TiAl-Based Alloys And Its Key Role For Grain Refinement, 2009.

C. U. Hecht, J. Zollinger, A. Drevermann, and V. Witusiewicz, Experimental and computational analysis of the solidification path in TiAl-based alloys, DPG Spring meeting, 2009.

C. D. Horwat, E. Aubry, J. Zollinger, S. Migot, and J. F. Pierson, Properties of nanocrystalline and amorphous W-Zr thin films deposited by co-sputtering, 14th International Conference on Thin Films -ICTF14, 2008.

C. U. Hecht, J. Zollinger, V. Witusiewicz, and A. Drevermann, The role of heterogeneous nucleation for grain refinement of TiAl-based alloys, Materials Science and Engineering MSE, 2008.

J. Zollinger, V. T. Witusiewicz, A. A. Bondar, U. Hecht, S. Rex et al., Thermodynamic description of the ternary Al-Nb-Ti system and application to TiAl-based alloys, Discussion Meeting on Thermodynamic OF Alloys -TOFA, 2008.

C. J. Zollinger, V. Witusiewicz, A. Drevermann, D. Daloz, and U. Hecht, Solidification of TiAl-based alloys with low boron additions, 2nd International Conference on Advances in Solidification Processes -ICASP, 2008.

J. Zollinger, D. Daloz, J. Lapin, and H. Combeau, Influence de l'oxygène sur les équilibres de phases et la microségrégation lors de la solidification d'alliages de base g-TiAl, 2006.

D. Daloz, J. Zollinger, and L. Héricher, Effet de l'oxygène sur la solidification d'aluminiures de titane, 1ères Journées de la FFM, 2004.

M. Gennesson, D. Daloz, J. Zollinger, J. Demurger, D. Poirier et al., Inoculation experiments in lab-scale castings of low alloyed steel, 6th Decennial International Conference on Solidification Processing, 2017.

. S. Ca2-a, P. Vaillant, J. P. Corne, J. Jehl, S. Zollinger et al., Effets des recoulées successives sur le comportement mécanique d'alliages dentaires de type Co-Cr, 2016.

L. Deillon, J. Zollinger, D. Daloz, M. Zalo-?nik, and H. Combeau, In-situ Investigation of Solutal Melting using Laser Scanning Confocal Microscopy, International Conference on Advances in Solidification Processes, vol.4, pp.8-11, 2014.

J. Zollinger, H. Ben-hamouda, D. Daloz, .. Ch, F. Gandin et al., Morphology and Microsegregation Development during Directional Solidification of the AM1 Nickel-based Superalloy, Euromat'11 Conference, 2011.

J. Zollinger, A. Jimenez, D. Daloz, V. Robin, . Ph et al., Solidification Microstructure Evolution in Austenitic Stainless Steel Welds, Euromat'11 Conference, 2011.

J. Zollinger, A. Drevermann, J. Eiken, V. Witusiewicz, U. Hecht et al., Herzogenrath, Microstructure formation by in situ grain refinement, Heterogeneous Nucleation and Microstructure Formation -DFG SPP1296, 2008.

C. J. Zollinger, D. Daloz, J. Lapin, and H. Combeau, Formation des microségrégations et des microstructures dans l'alliage Ti-46Al-8Nb, 2007.

D. Daloz, L. Héricher, and J. Zollinger, Effect of oxygen on the solidification behaviour of Ti-Al alloys, Discussion Meeting on Thermodynamic OF Alloys -TOFA, 2004.