J. Liao, N. Brosse, A. Pizzi, and S. Hoppe, Dynamically Cross-Linked Tannin as a Reinforcement of Polypropylene and UV Protection Properties, Polymers, vol.11, issue.1, p.102, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01977584

J. Liao, N. Brosse, and A. Pizzi, Sandrine Hoppe, and Xuedong XI 2019. Polypropylene blend with polyphenols through dynamic vulcanization: mechanical, rheological, crystalline, thermal and UV protective property, Polymers

J. Liao, N. Brosse, A. Pizzi, and S. Hoppe, Tannin modified via acetylation as a feedstock material for poly (lactic acid) 3D printing filament

J. Liao, N. Brosse, A. Pizzi, and S. Hoppe, Compatibility improvement of poly (lactic acid) and tannin via one-step compatibilization

J. Liao, N. Brosse, A. Pizzi, and S. Hoppe, Interfacial improvements in poly (lactic acid) and tannin via in Situ reactive extrusion

X. Xi, J. Liao, A. Pizzi, C. Gerardin, S. Amirou et al., 5-Hydroxymethyl furfural modified melamine glyoxal resin, The Journal of Adhesion, pp.1-19, 2019.

N. Balasundram, K. Sundram, and S. Samman, Phenolic compounds in plants and agri-industrial by-products: Antioxidant activity, occurrence, and potential uses, Food Chem, vol.99, pp.191-203, 2006.

J. Goldstein and T. Swain, Changes in tannins in ripening fruits, Phytochemistry, 1963.

A. E. Hagerman and L. G. Butler, Protein precipitation method for the quantitative determination of tannins, J. Agric. Food Chem, vol.26, pp.809-812, 1978.

S. Quideau, D. Deffieux, C. Douat-casassus, and L. Pouysegu, Plant polyphenols: chemical properties, biological activities, and synthesis, Angew. Chem. Int. Ed, vol.50, pp.586-621, 2011.

V. Koleckar, K. Kubikova, Z. Rehakova, K. Kuca, D. Jun et al., Condensed and hydrolysable tannins as antioxidants influencing the health, Mini Rev. Med. Chem, vol.8, pp.436-447, 2008.

A. A. Bele, V. M. Jadhav, and V. J. Kadam, Potential of tannnins: A review, Asian J. Plant Sci, p.209, 2010.

N. Brosse and A. Pizzi, Tannins for wood adhesives, foams and composites, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01961798

A. Arbenz and L. Avérous, Chemical modification of tannins to elaborate aromatic biobased macromolecular architectures, vol.17, pp.2626-2646, 2015.

A. Pizzi, Tannin-Based Adhesives, J. Macromol. Sci. Part C, vol.18, pp.247-315, 1980.
URL : https://hal.archives-ouvertes.fr/hal-02678097

. Monomers, Polymers and Composites from Renewable Resources, 2008.

D. García, W. Glasser, A. Pizzi, S. Paczkowski, and M. Laborie, Modification of condensed tannins: from polyphenol chemistry to materials engineering, New J Chem, vol.40, pp.36-49, 2015.

E. García, D. ;. Glasser, W. Pizzi, A. P. Paczkowski, S. Laborie et al., Modification of condensed tannins: from polyphenol chemistry to materials engineering, New J. Chem, vol.40, pp.36-49, 2016.

P. J. Hernes and J. I. Hedges, Tannin signatures of barks, needles, leaves, cones, and wood at the molecular level 1 1Associate editor: C. Arnosti, Geochim. Cosmochim. Acta, vol.68, pp.1293-1307, 2004.

E. Bakkalba?i, Ö. Mente?, and N. Artik, Food Ellagitannins-Occurrence, Effects of Processing and Storage, Crit. Rev. Food Sci. Nutr, vol.49, pp.283-298, 2008.

B. Lochab, S. Shukla, and I. K. Varma, Naturally occurring phenolic sources: monomers and polymers, vol.4, pp.21712-21752, 2014.

L. Ping, A. Pizzi, Z. Guo, and N. Brosse, Condensed tannins from grape pomace: Characterization by FTIR and MALDI TOF and production of environment friendly wood adhesive, vol.40, pp.13-20, 2012.

M. Gaugler and W. J. Grigsby, Thermal Degradation of Condensed Tannins from Radiata Pine Bark, vol.29, pp.305-321, 2009.

C. Luo, W. Grigsby, N. Edmonds, A. Easteal, and J. Al-hakkak, Synthesis, characterization, and thermal behaviors of tannin stearates prepared from quebracho and pine bark extracts, J. Appl. Polym. Sci, vol.17, pp.352-360, 2010.

D. E. García, W. G. Glasser, A. Pizzi, S. Paczkowski, and M. Laborie,

, Hydroxypropyl tannin from Pinus pinaster bark as polyol source in urethane chemistry, vol.67, pp.152-165, 2015.

A. Duval and L. Avérous, Characterization and Physicochemical Properties of Condensed Tannins fromAcacia catechu, vol.64, pp.1751-1760, 2016.

C. Cui, H. Sadeghifar, S. Sen, D. S. Argyropoulos, and . Toward, Thermoplastic Lignin Polymers; Part II: Thermal & Polymer Characteristics of Kraft Lignin & Derivatives, Bioresources, vol.8, pp.864-886, 2012.

A. Arbenz and L. Avérous, Oxyalkylation of gambier tannin-Synthesis and characterization of ensuing biobased polyols, vol.67, pp.295-304, 2015.

A. Zhang, J. Li, S. Zhang, Y. Mu, W. Zhang et al., Characterization and acid-catalysed depolymerization of condensed tannins derived from larch bark, vol.7, pp.35135-35146, 2017.

S. Ben-mahmoud, H. Saad, B. Charrier, A. Pizzi, K. Rode et al., Charrier-El Bouhtoury, F. Characterization of sumac (Rhus tripartitum) root barks tannin for a potential use in wood adhesives formulation, Wood Sci. Technol, vol.49, pp.205-221, 2015.

T. D. Bruyne, L. Pieters, H. Deelstra, and A. Vlietinck, Condensed vegetable tannins: Biodiversity in structure and biological activities, Biochem. Syst. Ecol, vol.27, pp.445-459, 1999.

A. Pizzi, Wood products and green chemistry, Ann. For. Sci, vol.73, pp.185-203, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01284230

A. Pizzi and F. A. Cameron, Decrease of pressing temperature and adhesive content by metallic ion catalysis in tannin-bonded particleboard, Holz Als Roh-Werkst, vol.39, pp.463-467, 1981.

K. L. Mittal, Adhesive Joints, Formation, Characteristics, and Testing, 1984.

A. Pizzi, Wattle-base adhesives for exterior grade particleboards, vol.28, pp.42-47, 1978.

D. E. García;-w, ;. Glasser, ;. Pizzi, and . Lacoste,

M. , Laborie Polyphenolic resins prepared with maritime pine bark tannin and bulky-aldehydes, vol.62, pp.84-93, 2014.

G. Tondi, Tannin-based copolymer resins: Synthesis and characterization by solid state 13C NMR and FT-IR spectroscopy, Polymers, vol.9, p.223, 2017.

A. Pizzi, Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues, Recent Dev. Eco-Effic. Bio-Based Adhes. Wood Bond. Oppor. Issues, vol.20, pp.829-846, 2006.

F. Pichelin, C. Kamoun, and A. Pizzi, Hexamine hardener behaviour: effects on wood glueing, tannin and other wood adhesives. Holz Als Roh-Werkst, vol.57, pp.305-317, 1999.

U. H. Abdullah and A. Pizzi, Tannin-furfuryl alcohol wood panel adhesives without formaldehyde, Eur. J. Wood Wood Prod, vol.71, pp.131-132, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01593787

B. Heredia, J. Sánchez-martín, and J. , Removing heavy metals from polluted surface water with a tannin-based flocculant agent, J. Hazard. Mater, vol.165, pp.1215-1218, 2009.

S. Doszlop, V. Vargha, and F. Horkay, Reactions of Epoxy with Other Functional Groups and the Arising Sec-Hydroxyl Groups, Period. Polytech. Chem. Eng, vol.22, pp.253-275, 1978.

G. Jin-jie, ????? Synthesis of Biodegradable Polyurethane Foams from

, Condensed Tannin and Bark of Acacia mearnsi, pp.21-85, 1998.

H. R. Kaspar, A. Pizzi, A. Nicollin, X. Zhou, A. Pizzi et al., MALDI-TOF and 13C NMR analysis of a renewable resource additive-Thermoplastic acetylated tannins, J. Appl. Polym. Sci, vol.59, pp.851-857, 1996.

W. J. Grigsby, J. H. Bridson, C. Lomas, and J. Elliot, Esterification of Condensed Tannins and Their Impact on the Properties of Poly(Lactic Acid), pp.344-360, 2013.

D. E. García, ;. Escobar;-rodrigo, and A. , Cancino Maleinated polyflavonoids and lignin as functional additives for three kinds of thermoplastics. Iran, Polym. J, vol.26, pp.295-304, 2017.

J. H. Bridson, W. J. Grigsby, and L. Main, Synthesis and characterization of flavonoid laurate esters by transesterification, J Appl Polym Sci, vol.129, pp.181-186, 2013.

C. Wang, S. S. Kelley, and R. A. Venditti, Lignin-Based Thermoplastic Materials, ChemSusChem, vol.9, pp.770-783, 2016.

D. E. Marrero, W. G. Glasser, A. Pizzi, S. Paczkowski, and M. G. Laborie, Substitution pattern elucidation of hydroxypropyl Pinus pinaster (Ait.) bark polyflavonoid derivatives by ESI(?)-MS/MS, J. Mass Spectrom, vol.49, pp.1050-1058, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01597793

D. E. García, W. G. Glasser, A. Pizzi, O. Anayancy, and M. Laborie,

, Hydroxypropyl tannin derivatives from Pinus pinaster (Ait.) bark. Ind Crop Prod, vol.49, pp.730-739, 2013.

D. E. García, W. G. Glasser, T. A. Pizzi, O. Anayancy, and M. G. Laborie, Synthesis and physicochemical properties of hydroxypropyl tannins from maritime pine bark, Pinus pinaster Ait.). Holzforschung, vol.68, pp.411-418, 2014.

D. Garcia, Bark polyflavonoids from Pinus radiata as functional building-blocks for polylactic acid (PLA)-based green composites, Express Polym Lett, vol.10, pp.835-848, 2016.

D. E. García, C. A. Fuentealba, J. P. Salazar, M. A. Pérez, D. Escobar et al., Mild hydroxypropylation of polyflavonoids obtained under pilot-plant scale, Ind. Crops Prod, vol.87, pp.350-362, 2016.

J. H. Bridson, W. J. Grigsby, and L. Main, One-pot solvent-free synthesis and characterisation of hydroxypropylated polyflavonoid compounds, vol.111, pp.529-535, 2018.

D. Roux, D. Ferreira, H. Hundt, M. E. Symp, M. Misra et al., Structure, stereochemistry, and reactivity of natural condensed tannins as basis for their extended industrial application. 1975. 51. Mohanty, A, J. Polym. Environ, vol.10, pp.19-26, 2002.

, Hélène Nouailhas; Chahinez Aouf; Christine Guerneve

B. Boutevin,

H. A. Shnawa, M. N. Khalaf, and Y. Jahani, Thermal degradation, dynamic mechanical and morphological properties of PVC stabilized with natural polyphenolbased epoxy resin, Hélène Fulcrand Synthesis and properties of biobased epoxy resins. part 1. Glycidylation of flavonoids by epichlorohydrin. Synth. Prop. Biobased Epoxy Resins Part 1 Glycidylation Flavonoids Epichlorohydrin, vol.49, pp.3473-3498, 2011.

H. A. Shnawa, Y. Jahani, and M. N. Khalaf, Rheological properties of PVC stabilized with tannin based epoxy resin as non metallic thermal stabilizer, vol.74, pp.1077-1090, 2017.

S. Jahanshahi, A. Pizzi, A. Abdulkhani, and A. Shakeri, Analysis and Testing of Bisphenol A-Free Bio-Based Tannin Epoxy-Acrylic Adhesives, Polymers, vol.8, p.143, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01599584

S. Benyahya, C. Aouf, S. Caillol, B. Boutevin, J. P. Pascault et al., Functionalized green tea tannins as phenolic prepolymers for bio-based epoxy resins, Ind. Crops Prod, vol.53, pp.296-307, 2014.

P. Song, S. Jiang, Y. Ren, X. Zhang, T. Qiao et al., Synthesis and characterization of tannin grafted polycaprolactone, J. Colloid Interface Sci, vol.479, pp.160-164, 2016.

J. P. Maris and I. Joutang, Anti-Adhesive Coatings Based on Condensed Tannins, 2018.

A. Lindert and S. M. Wolpert, Tannin mannich adducts for improving corrosion resistance of metals, 1990.

G. Matamala, W. Smeltzer, and G. Droguett, Use of Tannin Anticorrosive Reaction Primer to Improve Traditional Coating Systems, CORROSION, vol.50, pp.270-275, 1994.

A. Mohammad, S. ;-m.m, G. Esmaeil, P. E. Sarquís, J. M. Menéndez-aguado et al., Selective separation of PVC from PET/PVC mixture using floatation by tannic acid depressant, J. Clean. Prod, vol.19, pp.723-726, 2010.

A. E. Markham and C. Adolphson, Drilling composition and method, 1972.

M. Mosiewicki, M. I. Aranguren, and J. Borrajo, Thermal and mechanical properties of woodflour/tannin adhesive composites, J. Appl. Polym. Sci, vol.91, pp.3074-3082, 2004.

M. A. Mosiewicki, M. I. Aranguren, A. A. Curvelo, and J. Borrajo, Effect of natural rubber on wood-reinforced tannin composites, J. Appl. Polym. Sci, vol.105, pp.1825-1832, 2007.

A. Nicollin, R. Kueny, L. Toniazzo, and A. Pizzi, High Density Biocomposite from Natural Fibers and Tannin Resin, J. Adhes. Sci. Technol, vol.26, pp.1537-1545, 2012.

A. Pizzi, R. Kueny, F. Lecoanet, B. Massetau, D. Carpentier et al., High resin content natural matrix-natural fibre biocomposites, Ind. Crops Prod, vol.30, pp.235-240, 2009.

J. Zhu, H. Zhu, J. Njuguna, and H. Abhyankar, Recent Development of Flax Fibres and Their Reinforced Composites Based on Different Polymeric Matrices, Materials, vol.6, pp.5171-5198, 2013.

A. Sauget, A. Nicollin, and A. Pizzi, Fabrication and mechanical analysis of mimosa tannin and commercial flax fibers biocomposites, J. Adhes. Sci. Technol, vol.27, pp.2204-2218, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01593630

X. Li, A. Nicollin, A. Pizzi, X. Zhou, A. Sauget et al., Natural tannin-furanic thermosetting moulding plastics, RSC Adv, vol.3, pp.17732-17740, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01593759

M. C. Basso, C. Lacoste, A. Pizzi, E. Fredon, and L. Delmotte, MALDI-TOF and 13C NMR analysis of flexible films and lacquers derived from tannin, Ind. Crops Prod, vol.61, pp.352-360, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01597091

M. C. Lagel, J. Zhang, and A. Pizzi, Cutting and grinding wheels for angle grinders with a bioresin matrix, Ind. Crops Prod, vol.67, pp.264-269, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01598432

M. C. Lagel, L. Hai, A. Pizzi, M. C. Basso, L. Delmotte et al., Automotive brake pads made with a bioresin matrix, Ind. Crops Prod, vol.85, pp.372-381, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01599596

U. Abdullah, X. Zhou, A. Pizzi, and A. Merlin, Note on surface quality of plywood overlaid with mimosa (Acacia mearnsii) tannin and melamine urea formaldehyde impregnated paper: effects of moisture content of resin impregnated papers before pressing on physical properties of overlaid panels, Int Wood Prod J, vol.4, pp.253-256, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01593456

U. H. Abdullah, A. Pizzi, and X. Zhou, High pressure paper laminates from mimosa tannin resin. Int. Wood Prod, J, vol.5, pp.224-227, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01592028

N. E. Meikleham and A. Pizzi, Acid-and alkali-catalyzed tannin-based rigid foams

, J. Appl. Polym. Sci, vol.53, pp.1547-1556, 1994.

X. Li, A. Pizzi, C. Lacoste, V. Fierro, and A. Celzard,

/. Tannin and . Furanic, Resin Foamed With Different Blowing Agents, Bioresources, vol.8, pp.743-752, 2012.

W. Rao, Z. Zhu, S. Wang, T. Wang, Y. Tan et al., A reactive phosphorus-containing polyol incorporated into flexible polyurethane foam: Self-extinguishing behavior and mechanism, Polym. Degrad. Stab, vol.153, pp.192-200, 2018.

M. ?op, B. Gospodari?, K. Kemppainen, S. Giovando, M. Laborie et al., Characterization of the curing process of mixed pine and spruce tanninbased foams by different methods, Eur. Polym. J, vol.69, pp.29-37, 2015.

X. Li, A. Pizzi, X. Zhou, V. Fierro, A. Celzard et al.,

, Prorobitenidin/Profi setinidin Tannin/Furanic Foams Based on Alternative Aldehydes: Glyoxal and Glutaraldehyde, J. Renew. Mater, vol.3, pp.142-150, 2015.

W. Zhao, V. Fierro, A. Pizzi, and A. Celzard, Bimodal cellular activated carbons derived from tannins, J. Mater. Sci, vol.45, pp.5778-5785, 2010.

W. Zhao, A. Pizzi, V. Fierro, G. Du, and A. Celzard, Effect of composition and processing parameters on the characteristics of tannin-based rigid foams. Part I: Cell structure, Mater. Chem. Phys, vol.122, pp.175-182, 2010.

W. Zhao, V. Fierro, A. Pizzi, G. Du, and A. Celzard, Effect of composition and processing parameters on the characteristics of tannin-based rigid foams. Part II: Physical properties, Mater. Chem. Phys, vol.123, pp.210-217, 2010.

J. Sánchez-martín, J. Beltrán-heredia, A. Delgado-regaña, M. A. Rodríguez-gonzález, and F. Rubio-alonso, Optimization of tannin rigid foam as adsorbents for wastewater treatment, Ind. Crops Prod, vol.49, pp.507-514, 2013.

A. J. Kaylo and N. T. Castellucci, Tannin-epoxy reaction products and compositions thereof, 1984.

L. Shang, X. Zhang, M. Zhang, L. Jin, L. Liu et al., Narita Khundamri; Chahinez Aouf; Hélène Fulcrand; Eric Dubreucq; Varaporn Tanrattanakul Bio-based flexible epoxy foam synthesized from epoxidized soybean oil and epoxidized mangosteen tannin. Bio-Based Flex, Epoxy Foam Synth. Epoxidized Soybean Oil Epoxidized Mangosteen Tann, vol.53, pp.556-565, 2018.

J. Ge, R. Wu, X. Shi, Y. Liu, and W. Min, Application of tannin and starch as crosslinker in modification of polyurethane, Acta Polym. Sin, vol.6, pp.809-815, 2003.

C. Luo, W. J. Grigsby, N. R. Edmonds, and A. Jafar, Vegetable oil thermosets reinforced by tannin-lipid formulations, vol.9, pp.5226-5233, 2013.

M. C. Basso, S. Giovando, A. Pizzi, H. Pasch, N. Pretorius et al., Flexible-elastic copolymerized polyurethane-tannin foams, J. Appl. Polym. Sci, p.131, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01295582

A. J. Sunija, S. S. Ilango, and K. P. Kumar, Synthesis and Characterization of Bio-Based Polyurethane from Benzoylated Cashewnut Husk Tannins, Bull. Mater. Sci, vol.37, pp.735-741, 2014.

J. Ge, X. Shi, M. Cai, R. Wu, and M. Wang, A novel biodegradable antimicrobial PU foam from wattle tannin, J. Appl. Polym. Sci, vol.90, pp.2756-2763, 2003.

Y. Peng, Z. Zheng, P. Sun, X. Wang, and T. Zhang, Kirschweng, B.; Tátraaljai, D.; Földes, E.; Pukánszky, B. Natural antioxidants as stabilizers for polymers, New J. Chem, vol.37, pp.25-40, 2013.

A. Nanni and M. Messori, A comparative study of different winemaking byproducts derived additives on oxidation stability, mechanical and thermal proprieties of polypropylene, Polym. Degrad. Stab, vol.149, pp.9-18, 2018.

V. Ambrogi, P. Cerruti, C. Carfagna, M. Malinconico, V. Marturano et al., Natural antioxidants for polypropylene stabilization, Polym. Degrad. Stab, vol.96, pp.2152-2158, 2011.

M. D. Samper, E. Fages, O. Fenollar, T. Boronat, and R. Balart, The potential of flavonoids as natural antioxidants and UV light stabilizers for polypropylene, J. Appl. Polym. Sci, vol.129, pp.1707-1716, 2013.

K. J. Olejar, S. Ray, and P. A. Kilmartin, Enhanced antioxidant activity of polyolefin films integrated with grape tannins: Enhanced antioxidant activity of polyolefin films integrated with grape tannins, J. Sci. Food Agric, vol.96, pp.2825-2831, 2016.

H. A. Shnawa, Y. Jahani, M. N. Khalaf, and A. H. Taobi, The potential of tannins as thermal co-stabilizer additive for polyvinyl chloride, J. Therm. Anal. Calorim, vol.123, pp.1253-1261, 2016.

M. Anwer, H. E. Naguib, A. Celzard, and V. Fierro, Comparison of the thermal, dynamic mechanical and morphological properties of PLA-Lignin & PLA-Tannin particulate green composites, Compos Part B Eng, vol.82, pp.92-99, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01294577

W. Grigsby and J. Kadla, Evaluating Poly(lactic acid) Fiber Reinforcement with Modified Tannins, Macromol Mater Eng, vol.299, pp.368-378, 2014.

J. Sunthornvarabhas, S. Liengprayoon, C. Aouf, W. Rungjang, K. Sangseethong et al., Tara tannin as active ingredient in electrospun fibrous delivery system, J. Appl. Polym. Sci, p.133, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01506478

G. J. Garro, B. Riedl, and A. H. Conner, Analytical Studies on Tara Tannins. Holzforsch. -Int. J. Biol. Chem. Phys. Technol. Wood, vol.51, pp.235-243, 2009.

Y. Zhai, J. Wang, H. Wang, T. Song, W. Hu et al., Preparation and Characterization of Antioxidative and UV-Protective Larch Bark Tannin/PVA Composite Membranes, Molecules, vol.23, p.2073, 2018.

W. J. Grigsby, J. H. Bridson, and C. Schrade, Modifying biodegradable plastics with additives based on condensed tannin esters, J Appl Polym Sci, vol.132, p.41626, 2015.

W. Grigsby, J. Bridson, C. Lomas, and H. Frey, Evaluating Modified Tannin Esters as Functional Additives in Polypropylene and Biodegradable Aliphatic Polyester, Macromol Mater Eng, vol.299, pp.1251-1258, 2014.

D. E. García, J. P. Salazar, S. Riquelme, N. Delgado, and S. Paczkowski, Condensed Tannin-Based Polyurethane as Functional Modifier of PLA-Composites, Polym.-Plast. Technol. Eng, vol.57, pp.709-726, 2018.

J. H. Bridson, J. Kaur, Z. Zhang, L. Donaldson, and A. Fernyhough, Polymeric flavonoids processed with co-polymers as UV and thermal stabilisers for polyethylene films, Polym Degrad Stabil, vol.122, pp.18-24, 2015.

H. A. Shnawa, M. I. Khaleel, and F. J. Muhamed, Oxidation of HDPE in the Presence of PVC Grafted with Natural Polyphenols (Tannins) as Antioxidant, vol.05, pp.9-16, 2015.

S. Jiang, P. Song, H. Guo, X. Zhang, Y. Ren et al., Blending PLLA/tannin-grafted PCL fiber membrane for skin tissue engineering, J. Mater. Sci, vol.52, pp.1617-1624, 2017.

H. A. Shnawa, Thermal stabilization of polyvinyl chloride with traditional and naturally derived antioxidant and thermal stabilizer synthesized from tannins, J. Therm. Anal. Calorim, vol.129, pp.789-799, 2017.

J. Liao, N. Brosse, A. Pizzi, and S. Hoppe, Dynamically Cross-Linked Tannin as a Reinforcement of Polypropylene and UV Protection Properties, Polymers, p.102, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01977584

, Composite Materials. In Materials Handbook: A Concise Desktop Reference

F. Cardarelli, , pp.1019-1035, 2008.

R. F. Landel, L. E. Nielsen, and L. E. Nielsen, Mechanical Properties of Polymers and Composites, 1993.

D. Ray and . Ed, Biocomposites for high-performance applications: current barriers and future needs towards industrial development, 2017.

M. Tolinski, Additives for polyolefins: getting the most out of polypropylene, polyethylene and TPO; PDL handbook series, William Andrew is an imprint of Elsevier, 2015.

V. K. Thakur, Green Composites from Natural Resources, 2013.

C. Baillie, . Green, and . Composites, Polymer Composites and the Environment, 2005.

A. K. Mohanty, M. Misra, L. T. Drzal, M. Misra, and L. T. Drzal, Biopolymers, and Biocomposites, 2005.

R. Wool and X. S. Sun, Bio-based polymers and composites

M. Sorieul, A. Dickson, S. Hill, and H. Pearson, Plant Fibre: Molecular Structure and Biomechanical Properties, of a Complex Living Material, Influencing Its Deconstruction towards a Biobased Composite, Materials, vol.9, p.618, 2016.

W. Xiaodong, G. Xuan, and S. K. Rakshit, Direct fermentative production of lactic acid on cassava and other starch substrates, Biotechnol. Lett, vol.19, pp.841-843, 1997.

S. S. Narine and X. Kong, Vegetable Oils in Production of Polymers and Plastics. In Bailey's Industrial Oil and Fat Products

F. Shahidi, , 2005.

P. M. Polypropylene-based, V. Poletto, and M. , , 2018.

H. G. Karian and . Ed, , 2003.

. Karger-kocsis, J. Polypropylene structure, blends and composites, vol.3

, Springer Science & Business Media, 2012.

A. Basu, M. Nazarkovsky, R. Ghadi, W. Khan, and A. J. Domb, Poly(lactic acid)-based nanocomposites, vol.28, pp.919-930, 2017.

J. Ren, Biodegradable poly (lactic acid) synthesis, modification, processing and applications

. Heidelberg, , 2011.

J. Flynt, All About Polypropylene Plastic: Advantages and Disadvantages. 3D Insid, 2018.

, Poly(lactic acid) science and technology: processing, properties, additives and applications

A. Jiménez, M. Peltzer, and R. Ruseckaite, RSC polymer chemistry series, Royal Society of Chemistry: Cambridge, 2015.

, Synthesis, structure and properties of poly

D. Lorenzo, M. L. Androsch, and R. Abdel-rahman, Advances in polymer science, 2018.

, EUBIO_Admin Market. Eur. Bioplastics EV

H. Pan, J. Kong, Y. Chen, H. Zhang, and L. Dong, Improved heat resistance properties of poly(l-lactide)/basalt fiber biocomposites with high crystallinity under forming hybrid-crystalline morphology, Int. J. Biol. Macromol, vol.122, pp.848-856, 2019.

R. M. Rasal, A. V. Janorkar, and D. E. Hirt, Poly(lactic acid) modifications, Prog. Polym. Sci, vol.35, pp.338-356, 2010.

S. R. Djafari-petroudy, Physical and mechanical properties of natural fibers, Advanced High Strength Natural Fibre Composites in Construction; Fan, pp.59-83, 2017.

M. Fortea-verdejo, E. Bumbaris, C. Burgstaller, A. Bismarck, and K. Lee, Plant fibre-reinforced polymers: where do we stand in terms of tensile properties?, Int. Mater. Rev, vol.62, pp.441-464, 2017.

M. Ragoubi, B. George, S. Molina, D. Bienaimé, A. Merlin et al., Effect of corona discharge treatment on mechanical and thermal properties of composites based on miscanthus fibres and polylactic acid or polypropylene matrix, Compos. Part Appl. Sci. Manuf, vol.43, pp.675-685, 2012.

M. Ragoubi, D. Bienaimé, S. Molina, B. George, and A. Merlin, Impact of corona treated hemp fibres onto mechanical properties of polypropylene composites made thereof, Ind. Crops Prod, vol.31, pp.344-349, 2010.

C. Cordeiro, R. Villela-pacheco, L. Schierl, S. Víana, H. Simão et al., Effects of different plasma treatments of short fibers on the mechanical properties of polypropylene-wood composites, Polym. Compos, vol.39, pp.1468-1479, 2018.

M. B. Hoque and . Solaiman,

A. B. Alam, H. Mahmud, and A. Nobi, Degradation and Water Uptake Properties of Fabric Reinforced Polypropylene Based Composites: Effect of Alkali on, Composites, vol.6, p.94, 2018.

M. George, P. G. Mussone, and D. C. Bressler, Surface and thermal characterization of natural fibres treated with enzymes, Ind. Crops Prod, vol.53, pp.365-373, 2014.

O. M. Asumani, R. G. Reid, and R. Paskaramoorthy, The effects of alkali-silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene composites, Compos. Part Appl. Sci. Manuf, vol.43, pp.1431-1440, 2012.

T. Sullins, S. Pillay, A. Komus, and H. Ning, Hemp fiber reinforced polypropylene composites: The effects of material treatments, Compos. Part B Eng, vol.114, pp.15-22, 2017.

T. Yu, N. Jiang, and Y. Li, Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride, Compos. Part Appl. Sci. Manuf, vol.64, pp.139-146, 2014.

C. Guo, L. Li, and H. Li, Evaluation of interfacial compatibility in wood flour/polypropylene composites by grafting isocyanate silane coupling agent on polypropylene, J. Adhes. Sci. Technol, pp.1-11, 2018.

A. Karmarkar, S. S. Chauhan, J. M. Modak, and M. Chanda, Mechanical properties of wood-fiber reinforced polypropylene composites: Effect of a novel compatibilizer with isocyanate functional group, Compos. Part Appl. Sci. Manuf, vol.38, pp.227-233, 2007.

T. Yu, C. Hu, X. Chen, and Y. Li, Effect of diisocyanates as compatibilizer on the properties of ramie/poly(lactic acid) (PLA) composites, Compos. Part Appl. Sci. Manuf, vol.76, pp.20-27, 2015.

Y. Dong, A. Ghataura, H. Takagi, H. J. Haroosh, A. N. Nakagaito et al., Polylactic acid (PLA) biocomposites reinforced with coir fibres: Evaluation of mechanical performance and multifunctional properties, Compos. Part Appl. Sci. Manuf, vol.63, pp.76-84, 2014.

A. El-sabbagh, Effect of coupling agent on natural fibre in natural fibre/polypropylene composites on mechanical and thermal behaviour, Compos. Part B Eng, vol.57, pp.126-135, 2014.

A. A. Yussuf, I. Massoumi, and A. Hassan, Comparison of Polylactic Acid/Kenaf and Polylactic Acid/Rise Husk Composites: The Influence of the Natural Fibers on the Mechanical, Thermal and Biodegradability Properties, J. Polym. Environ, vol.18, pp.422-429, 2010.

A. Nourbakhsh, A. Ashori, and A. Kazemi-tabrizi, Characterization and biodegradability of polypropylene composites using agricultural residues and waste fish, Compos. Part B Eng, vol.56, pp.279-283, 2014.

T. Serra, M. Ortiz-hernandez, E. Engel, J. A. Planell, and M. Navarro, Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds, Mater. Sci. Eng. C, vol.38, pp.55-62, 2014.

H. P. Khalil, A. H. Bhat, and A. F. Yusra, Green composites from sustainable cellulose nanofibrils: A review, Carbohyd Polym, vol.87, pp.963-979, 2012.

K. Wilson and D. J. White, The anatomy of wood: its diversity and variability.; Stobart & Son Ltd, 1986.

G. Siqueira, J. Bras, and A. Dufresne, Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications, Polymers, vol.2, pp.728-765, 2010.

M. Haniffa, M. A. Ching, Y. C. Abdullah, L. C. Poh, S. C. Chuah et al., Review of Bionanocomposite Coating Films and Their Applications, vol.8, p.246, 2016.

M. R. Kamal and V. Khoshkava, Effect of cellulose nanocrystals (CNC) on rheological and mechanical properties and crystallization behavior of PLA/CNC nanocomposites, Carbohydr. Polym, vol.123, pp.105-114, 2015.

K. Missoum, M. N. Belgacem, and J. Bras, Nanofibrillated Cellulose Surface Modification: A Review, Materials, vol.6, pp.1745-1766, 2013.

A. Abdulkhani, J. Hosseinzadeh, A. Ashori, S. Dadashi, and Z. Takzare, Preparation and characterization of modified cellulose nanofibers reinforced polylactic acid nanocomposite, Polym. Test, vol.35, pp.73-79, 2014.

Y. Zhang, X. Li, Y. Yang, A. Lan, X. He et al., In situ graft copolymerization of l -lactide onto cellulose and the direct melt spinning, Rsc Adv, vol.4, pp.34584-34590, 2014.

W. Qiu, T. Endo, and T. Hirotsu, Interfacial interaction, morphology, and tensile properties of a composite of highly crystalline cellulose and maleated polypropylene, J. Appl. Polym. Sci, vol.102, pp.3830-3841, 2006.

D. Bondeson and K. Oksman, Dispersion and characteristics of surfactant modified cellulose whiskers nanocomposites, Compos. Interfaces, vol.14, pp.617-630, 2007.

L. Zhou, H. He, M. Li, S. Huang, C. Mei et al., Enhancing mechanical properties of poly(lactic acid) through its in-situ crosslinking with maleic anhydridemodified cellulose nanocrystals from cottonseed hulls, Ind. Crops Prod, vol.112, pp.449-459, 2018.

H. Yang, A. Kiziltas, and D. J. Gardner, Thermal analysis and crystallinity study of cellulose nanofibril-filled polypropylene composites, J. Therm. Anal. Calorim, vol.113, pp.673-682, 2013.

M. L. Hassan, A. P. Mathew, E. A. Hassan, S. M. Fadel, and K. Oksman, Improving cellulose/polypropylene nanocomposites properties with chemical modified bagasse nanofibers and maleated polypropylene, J. Reinf. Plast. Compos, vol.33, pp.26-36, 2014.

H. Li, Z. Cao, D. Wu, G. Tao, W. Zhong et al., Crystallisation, mechanical properties and rheological behaviour of PLA composites reinforced by surface modified microcrystalline cellulose, Plast. Rubber Compos, vol.45, pp.181-187, 2016.

E. Sullivan, R. Moon, and K. Kalaitzidou, Processing and Characterization of Cellulose Nanocrystals/Polylactic Acid Nanocomposite Films, Materials, vol.8, pp.8106-8116, 2015.

S. S. Karkhanis, N. M. Stark, R. C. Sabo, and L. M. Matuana, Water vapor and oxygen barrier properties of extrusion-blown poly(lactic acid)/cellulose nanocrystals nanocomposite films, Compos. Part Appl. Sci. Manuf, vol.114, pp.204-211, 2018.

C. Martin, A. M. Smith, . Starch, and . Biosynthesis, Plant Cell, vol.7, p.971, 1995.

R. L. Whistler, J. N. Bemiller, E. F. Paschall, and . Starch, Chemistry and Technology, 2012.

M. N. Belgacem, A. Gandini, and . Monomers, Polymers and Composites from Renewable Resources

K. E. Johnson, A. L. Pometto, and Z. L. Nikolov, Degradation of Degradable Starch-Polyethylene Plastics in a Compost Environment, Appl. Environ. Microbiol, vol.59, pp.1155-1161, 1993.

C. Bastioli, Starch-polymer composites, Degradable Polymers: Principles and applications

G. Scott and D. Gilead, , 1995.

M. A. Huneault and H. Li, Morphology and properties of compatibilized polylactide/thermoplastic starch blends, Polymer, vol.48, pp.270-280, 2007.

S. Nie, L. Song, Y. Guo, K. Wu, W. Xing et al., Intumescent Flame Retardation of Starch Containing Polypropylene Semibiocomposites: Flame Retardancy and Thermal Degradation, Ind. Eng. Chem. Res, vol.48, pp.10751-10758, 2009.

X. Wang, Y. Hu, L. Song, S. Xuan, W. Xing et al., Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Poly(lactic acid)/Starch Biocomposites, Ind. Eng. Chem. Res, vol.50, pp.713-720, 2011.

C. Réti, M. Casetta, S. Duquesne, S. Bourbigot, and R. Delobel, Flammability properties of intumescent PLA including starch and lignin, Polym. Adv. Technol, vol.19, pp.628-635, 2008.

Y. Xia and R. C. Larock, Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem, p.1893, 2010.

V. L. Finkenstadt, C. Liu, R. Evangelista, L. Liu, S. C. Cermak et al., Poly(lactic acid) green composites using oilseed coproducts as fillers, Ind. Crops Prod, vol.26, pp.36-43, 2007.

B. W. Chieng, N. A. Ibrahim, Y. Y. Then, and Y. Y. Loo, Epoxidized Vegetable Oils Plasticized Poly(lactic acid) Biocomposites: Mechanical, Thermal and Morphology Properties, Molecules, vol.19, pp.16024-16038, 2014.

P. Karmalm, T. Hjertberg, A. Jansson, and R. Dahl, Thermal stability of poly(vinyl chloride) with epoxidised soybean oil as primary plasticizer, Polym. Degrad. Stab, vol.94, pp.2275-2281, 2009.

S. P. Fore, F. C. Magne, and W. G. Bickford, Epoxidized jojoba oil as a stabilizer for vinyl chloride containing plastics, J. Am. Oil Chem. Soc, vol.35, pp.469-472, 1958.

S. Miao, P. Wang, Z. Su, and S. Zhang, Vegetable-oil-based polymers as future polymeric biomaterials, Acta Biomater, vol.10, pp.1692-1704, 2014.

B. Guo, Y. Chen, Y. Lei, L. Zhang, W. Y. Zhou et al., Biobased Poly(propylene sebacate) as Shape Memory Polymer with Tunable Switching Temperature for Potential Biomedical Applications, Biomacromolecules, vol.12, pp.1312-1321, 2011.

S. Miao, L. Sun, P. Wang, R. Liu, Z. Su et al., Soybean oil-based polyurethane networks as candidate biomaterials: Synthesis and biocompatibility, Eur. J. Lipid Sci. Technol, vol.114, pp.1165-1174, 2012.

A. Carbonell-verdu, D. Garcia-garcia, F. Dominici, L. Torre, L. Sanchez-nacher et al., PLA films with improved flexibility properties by using maleinized cottonseed oil, Eur. Polym. J, vol.91, pp.248-259, 2017.

J. M. Ferri, D. Garcia-garcia, L. Sánchez-nacher, O. Fenollar, and R. Balart, The effect of maleinized linseed oil (MLO) on mechanical performance of poly(lactic acid)-thermoplastic starch (PLA-TPS) blends, Carbohydr. Polym, vol.147, pp.60-68, 2016.

R. M. Rowell, Handbook of Wood Chemistry and Wood Composites, 2012.

C. Polysaccharides-i:-structure, T. Use;-heinze, and . Ed, Advances in Polymer Science, 2005.

J. M. Fang, R. C. Sun, J. Tomkinson, and P. Fowler, Acetylation of wheat straw hemicellulose B in a new non-aqueous swelling system, Carbohydr. Polym, vol.41, pp.379-387, 2000.

S. V. Schoultz, Method for extracting biomass, 2014.

T. Persson and A. Jönsson, Isolation of hemicelluloses by ultrafiltration of thermomechanical pulp mill process water-Influence of operating conditions, Chem. Eng. Res. Des, vol.88, pp.1548-1554, 2010.

B. Huang, Y. Tang, Q. Pei, K. Zhang, D. Liu et al., Hemicellulose-Based Films Reinforced with Unmodified and Cationically Modified Nanocrystalline Cellulose, J. Polym. Environ, vol.26, pp.1625-1634, 2018.

F. Dong, S. Li, M. Yan, and C. Li, Preparation and Properties of Chitosan/Nanocrystalline Cellulose Composite Films for Food Packaging, Asian J. Chem, vol.26, pp.5895-5898, 2014.

R. Liu, J. Du, Z. Zhang, H. Li, J. Lu et al., Preparation of polyacrylic acid-grafted-acryloyl/hemicellulose (PAA-g-AH) hybrid films with high oxygen barrier performance, Carbohydr. Polym, vol.205, pp.83-88, 2019.

Y. Lian, J. Zhang, N. Li, and Q. Ping, Preparation of Hemicellulose-based Hydrogel and its Application as an Adsorbent Towards Heavy Metal Ions, BioResources, p.13, 2018.

O. Hosseinaei, S. Wang, A. A. Enayati, and T. G. Rials, Effects of hemicellulose extraction on properties of wood flour and wood-plastic composites, Compos. Part -Appl. Sci. Manuf, vol.43, pp.686-694, 2012.

A. Marais, J. J. Kochumalayil, C. Nilsson, L. Fogelström, and E. K. Gamstedt, Toward an alternative compatibilizer for PLA/cellulose composites: Grafting of xyloglucan with PLA, Carbohydr. Polym, vol.89, pp.1038-1043, 2012.

W. Xu, A. Pranovich, P. Uppstu, X. Wang, D. Kronlund et al., Novel biorenewable composite of wood polysaccharide and polylactic acid for three dimensional printing, Carbohydr. Polym, vol.187, pp.51-58, 2018.

J. Chirkova, I. Andersone, I. Irbe, B. Spince, and B. Andersons, Lignins as agents for bio-protection of wood, Holzforschung, vol.65, pp.497-502, 2011.

W. Zhao, B. Simmons, S. Singh, A. Ragauskas, and G. Cheng, From lignin association to nano-/micro-particle preparation: extracting higher value of lignin, Green Chem, vol.18, pp.5693-5700, 2016.

P. Figueiredo, K. Lintinen, J. T. Hirvonen, M. A. Kostiainen, and H. A. Santos, Properties and chemical modifications of lignin: Towards lignin-based nanomaterials for biomedical applications, Prog. Mater. Sci, vol.93, pp.233-269, 2018.

C. Wang, S. Kelley, and C. Ra, Venditti-Lignin-Based Thermoplastic Materials, ChemSusChem, 2016.

H. Nadji, C. Bruzzèse, M. Belgacem, A. Benaboura, and A. Gandini, Oxypropylation of Lignins and Preparation of Rigid Polyurethane Foams from the Ensuing Polyols, Macromol Mater Eng, vol.290, pp.1009-1016, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00196909

,. El-mansouri, Q. Yuan, and F. Huang, Synthesis and characterization of kraft lignin-based epoxy resins, BioResources, vol.6, pp.2492-2503, 2011.

J. Yeo, D. Seong, and S. Hwang, Chemical surface modification of lignin particle and its application as filler in the polypropylene composites, J. Ind. Eng. Chem, vol.31, pp.80-85, 2015.

S. Laurichesse and L. Avérous, Chemical modification of lignins: Towards biobased polymers, Prog. Polym. Sci, vol.39, pp.1266-1290, 2014.

M. Thunga, K. Chen, D. Grewell, and M. R. Kessler, Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers, Carbon, vol.68, pp.159-166, 2014.

T. Maharana, S. Pattanaik, A. Routaray, N. Nath, and A. K. Sutar, Synthesis and characterization of poly(lactic acid) based graft copolymers, React. Funct. Polym, vol.93, pp.47-67, 2015.

R. Gadioli,

. Walter-ruggeri-waldman,

A. Marco and . De, Paoli Lignin as a green primary antioxidant for polypropylene, Lignin Green Prim. Antioxid. Polypropyl, p.133, 2016.

I. Blanco, G. Cicala, A. Latteri, G. Saccullo, A. M. El-sabbagh et al., Thermal characterization of a series of lignin-based polypropylene blends, J. Therm. Anal. Calorim, vol.127, pp.147-153, 2017.

A. A. Morandim-giannetti, J. A. Agnelli, B. Z. Lanças, R. Magnabosco, S. A. Casarin et al., Lignin as additive in polypropylene/coir composites: Thermal, mechanical and morphological properties, Carbohydr. Polym, vol.87, pp.2563-2568, 2012.

G. Toriz, F. Denes, and R. A. Young, Lignin-polypropylene composites. Part 1: Composites from unmodified lignin and polypropylene, Polym. Compos, vol.23, pp.806-813, 2002.

G. Toriz, J. Ramos, and R. A. Young, Lignin-polypropylene composites. II. Plasma modification of kraft lignin and particulate polypropylene, J. Appl. Polym. Sci, vol.91, pp.1920-1926, 2004.

S. Domenek, A. Louaifi, A. Guinault, and S. Baumberger, Potential of Lignins as Antioxidant Additive in Active Biodegradable Packaging Materials, J. Polym. Environ, vol.21, pp.692-701, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00987129

K. Formela, ?. Zedler, A. Hejna, and T. A. Letters, Reactive extrusion of bio-based polymer blends and composites-Current trends and future developments, Express Polym. Lett, p.12, 2018.

S. Luo, J. Cao, and A. G. Mcdonald, Interfacial Improvements in a Green Biopolymer Alloy of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and Lignin via in Situ Reactive Extrusion, ACS Sustain. Chem. Eng, vol.4, pp.3465-3476, 2016.

C. I. Chung, Extrusion of polymers: theory and practice; 2, 2010.

, An Introduction to Single Screw Extrusion Available online, 2019.

A. S. Da-silva, R. S. Teixeira, T. Endo, E. P. Bon, and S. Lee, Continuous pretreatment of sugarcane bagasse at high loading in an ionic liquid using a twin-screw extruder, Green Chem, p.15, 1991.

H. Yang, M. P. Wolcott, H. Kim, S. Kim, and H. Kim, Properties of lignocellulosic material filled polypropylene bio-composites made with different manufacturing processes, Polym. Test, vol.25, pp.668-676, 2006.

A. Gallos, G. Paës, F. Allais, and J. Beaugrand, Lignocellulosic fibers: a critical review of the extrusion process for enhancement of the properties of natural fiber composites, vol.7, pp.34638-34654, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01607627

F. Berzin, B. Vergnes, and J. Beaugrand, Evolution of lignocellulosic fibre lengths along the screw profile during twin screw compounding with polycaprolactone, Compos. Part Appl. Sci. Manuf, vol.59, pp.30-36, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00945373

B. Mano, J. R. Araújo, M. A. Spinacé, and M. De-paoli, Polyolefin composites with curaua fibres: Effect of the processing conditions on mechanical properties, morphology and fibres dimensions, Compos. Sci. Technol, vol.70, pp.29-35, 2010.

V. Alvarez, A. Iannoni, J. M. Kenny, and A. Vazquez, Influence of Twin-Screw Processing Conditions on the Mechanical Properties of Biocomposites, J. Compos. Mater, vol.39, pp.2023-2038, 2005.

M. Feldmann, H. Heim, and J. Zarges, Influence of the process parameters on the mechanical properties of engineering biocomposites using a twin-screw extruder, Compos. Part Appl. Sci. Manuf, vol.83, pp.113-119, 2016.

M. E. González-lópez, J. R. Robledo-ortíz, R. Manríquez-gonzález, J. A. Silva-guzmán, and A. A. Pérez-fonseca, Polylactic acid functionalization with maleic anhydride and its use as coupling agent in natural fiber biocomposites: a review, Compos, vol.25, pp.515-538, 2018.

P. Nanthananon, M. Seadan, S. Pivsa-art, H. Hamada, and S. Suttiruengwong, Reactive Compatibilization of Short-Fiber Reinforced Poly(lactic acid), Biocomposites. J. Renew. Mater, vol.6, pp.573-583, 2018.

H. Kang, X. Hu, M. Li, L. Zhang, Y. Wu et al., Novel biobased thermoplastic elastomer consisting of synthetic polyester elastomer and polylactide by in situ dynamical crosslinking method, RSC Adv, vol.5, pp.23498-23507, 2015.

L. Cui, S. Wang, Y. Zhang, and Y. Zhang, Dynamically cured polypropylene/Novolac blends compatibilized with maleic anhydride-g-polypropylene, J Appl Polym Sci, vol.104, pp.3337-3346, 2007.

X. Jiang, Y. Zhang, and Y. Zhang, Crystallization behavior of dynamically cured polypropylene/epoxy blends, J. Polym. Sci. Part B Polym. Phys, vol.42, pp.1181-1191, 2004.

T. J. Coogan and D. O. Kazmer, In-line rheological monitoring of fused deposition modeling, J. Rheol, vol.63, pp.141-155, 2018.

K. Tappa and U. Jammalamadaka, Novel Biomaterials Used in Medical 3D Printing Techniques, J. Funct. Biomater, p.9, 2018.

S. Bakrani-balani, F. Chabert, V. Nassiet, and A. Cantarel, Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid, Addit. Manuf, vol.25, pp.112-121, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01940351

J. Lee, J. An, and C. K. Chua, Fundamentals and applications of 3D printing for novel materials, Appl. Mater. Today, vol.7, pp.120-133, 2017.

J. M. Chacón, M. A. Caminero, E. García-plaza, and P. J. Núñez, Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection, Mater. Des, vol.124, pp.143-157, 2017.

M. F. Afrose, S. H. Masood, P. Iovenitti, M. Nikzad, and I. Sbarski, Effects of part build orientations on fatigue behaviour of FDM-processed PLA material, Prog. Addit. Manuf, vol.1, pp.21-28, 2016.

A. W. Fatimatuzahraa, B. Farahaina, and W. A. Yusoff, The effect of employing different raster orientations on the mechanical properties and microstructure of Fused References 192

, Deposition Modeling parts, Proceedings of the 2011 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), pp.22-27, 2011.

J. De-ciurana, L. Serenóa, and È. Vallès, Selecting Process Parameters in RepRap Additive Manufacturing System for PLA Scaffolds Manufacture, Procedia CIRP, vol.5, pp.152-157, 2013.

C. Bellehumeur, L. Li, Q. Sun, and P. Gu, Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process, J. Manuf. Process, vol.6, pp.170-178, 2004.

S. Bakrani-balani, F. Chabert, V. Nassiet, and A. Cantarel, Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid, Addit. Manuf, vol.25, pp.112-121, 2019.
URL : https://hal.archives-ouvertes.fr/hal-01940351

N. A. Nguyen, S. H. Barnes, C. C. Bowland, K. M. Meek, K. C. Littrell et al., A path for lignin valorization via additive manufacturing of highperformance sustainable composites with enhanced 3D printability, Sci. Adv, 2018.

R. Guo, Z. Ren, H. Bi, Y. Song, and M. Xu, Effect of toughening agents on the properties of poplar wood flour/poly (lactic acid) composites fabricated with Fused Deposition Modeling, Eur. Polym. J, vol.107, pp.34-45, 2018.

H. Long, Z. Wu, Q. Dong, Y. Shen, W. Zhou et al., Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing, Polym. Eng. Sci, vol.59, pp.247-260, 2019.

T. Li, J. Aspler, A. Kingsland, L. M. Cormier, X. Zou et al., J Sci Technol Prod Process, vol.5, p.30

H. Liu, H. He, X. Peng, B. Huang, and J. Li, Three-dimensional printing of poly(lactic acid) bio-based composites with sugarcane bagasse fiber: Effect of printing orientation on tensile performance, Polym. Adv. Technol, vol.30, pp.910-922, 2019.

J. Dong, M. Li, L. Zhou, S. Lee, C. Mei et al., The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing, J. Polym. Sci. Part B Polym. Phys, vol.55, pp.847-855, 2017.

C. A. Murphy and M. N. Collins, Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing, Polym. Compos, vol.39, pp.1311-1320, 2018.

A. Winter, N. Mundigler, J. Holzweber, S. Veigel, U. Müller et al., Residual wood polymers facilitate compounding of microfibrillated cellulose with poly(lactic acid) for 3D printer filaments, Philos. Trans. R. Soc. Math. Phys. Eng. Sci, p.376, 2018.

D. Filgueira, S. Holmen, J. K. Melbø, D. Moldes, A. T. Echtermeyer et al., Enzymatic-Assisted Modification of Thermomechanical Pulp Fibers To Improve the Interfacial Adhesion with Poly(lactic acid) for 3D Printing, ACS Sustain. Chem. Eng, vol.5, pp.9338-9346, 2017.

Q. Wang, J. Sun, Q. Yao, C. Ji, and J. Liu, Zhu, Q. 3D printing with cellulose materials, Cellulose, vol.25, pp.4275-4301, 2018.

E. Gkartzou, E. P. Koumoulos, and C. A. Charitidis, Production and 3D printing processing of bio-based thermoplastic filament, Manuf. Rev, 2001.

M. H. Hisham, Polypropylene as a promising plastic: A review, Am. J. Polym. Sci, vol.6, pp.1-11, 2016.

J. Yang, S. Lu, Q. Luo, L. Song, Y. Li et al., Enhanced mechanical and thermal properties of polypropylene/cellulose fibers composites with modified tannic as a compatibilizer, Polym. Compos, vol.39, pp.2036-2045, 2018.

S. Y. Jang and D. S. Kim, Preparation and Physical Properties of Polypropylene/Cellulose Composites, Polym. Korea, vol.39, pp.130-135, 2015.

M. U. De-la-orden, C. González-sánchez, M. González-quesada, and J. Martínez-urreaga, Novel polypropylene-cellulose composites using polyethylenimine as coupling agent, Compos. Part Appl. Sci. Manuf, vol.38, pp.2005-2012, 2007.

W. Qiu, F. Zhang, T. Endo, and T. Hirotsu, Effect of maleated polypropylene on the performance of polypropylene/cellulose composite, Polym. Compos, vol.26, pp.448-453, 2005.

M. D. Beg and K. L. Pickering, Accelerated weathering of unbleached and bleached Kraft wood fibre reinforced polypropylene composites, Polym. Degrad. Stab, vol.93, pp.1939-1946, 2008.

N. M. Stark and L. M. Matuana, Surface chemistry and mechanical property changes of wood-flour/high-density-polyethylene composites after accelerated weathering, J. Appl. Polym. Sci, vol.94, pp.2263-2273, 2004.

D. Stewart, Lignin as a base material for materials applications: Chemistry, application and economics, vol.27, pp.202-207, 2008.

P. Alexy, B. Ko???ová, and G. Podstránska, The effect of blending lignin with polyethylene and polypropylene on physical properties, Polymer, vol.41, pp.4901-4908, 2000.

C. Pouteau, P. Dole, B. Cathala, L. Averous, and N. Boquillon, Antioxidant properties of lignin in polypropylene, Polym. Degrad. Stab, vol.81, pp.9-18, 2003.
URL : https://hal.archives-ouvertes.fr/hal-02683437

A. Gregorová, Z. Cibulková, B. Ko?íková, and P. ?imon, Stabilization effect of lignin in polypropylene and recycled polypropylene, Polym Degrad Stabil, vol.89, pp.553-558, 2005.

A. Pizzi, Tannin-based adhesives, Wood Adhesives: Chemistry and Technology,. Tann.-Based Adhes. Wood Adhes, 1983.
URL : https://hal.archives-ouvertes.fr/hal-02678097

M. Gaugler, W. Grigsby, D. Harper, and T. Rials, Chemical imaging of the spatial distribution and interactions of tannin dispersal in bioplastic systems, p.29, 2007.

S. Kim, J. Moon, G. Kim, and C. Ha, Mechanical properties of polypropylene/natural fiber composites: Comparison of wood fiber and cotton fiber, Polym. Test, vol.27, pp.801-806, 2008.

F. Chen, H. Dai, X. Dong, J. Yang, and M. Zhong, Physical properties of ligninbased polypropylene blends, Polym Compos, vol.32, pp.1019-1025, 2011.

W. Chiang, W. Wu, and B. Pukánszky, Modification of polypropylene, blending with resole type phenol-formaldehyde resins, Eur. Polym. J, vol.30, pp.573-580, 1994.

C. L. Wu, M. Q. Zhang, M. Z. Rong, and K. Friedrich, Tensile performance improvement of low nanoparticles filled-polypropylene composites, Compos. Sci. Technol, vol.62, pp.1327-1340, 2002.

G. Wacker, A. K. Bledzki, and A. Chate, Effect of interphase on the transverse Young's modulus of glass/epoxy composites, Compos. Part Appl. Sci. Manuf, vol.29, pp.619-626, 1998.

B. Bozsódi, V. Romhányi, P. Pataki, D. Kun, K. Renner et al., Modification of interactions in polypropylene/lignosulfonate blends, Mater Des, vol.103, pp.32-39, 2016.

M. Tajvidi, R. H. Falk, and J. C. Hermanson, Effect of natural fibers on thermal and mechanical properties of natural fiber polypropylene composites studied by dynamic mechanical analysis, J. Appl. Polym. Sci, vol.101, pp.4341-4349, 2006.

S. K. Nayak, S. Mohanty, and S. K. Samal, Influence of short bamboo/glass fiber on the thermal, dynamic mechanical and rheological properties of polypropylene hybrid composites, Mater. Sci. Eng. A, vol.523, pp.32-38, 2009.

F. Zoukrami, N. Haddaoui, M. Sclavons, J. Devaux, and C. Vanzeveren, Rheological properties and thermal stability of compatibilized polypropylene/untreated silica composites prepared by water injection extrusion process, Polym Bull, vol.75, pp.5551-5566, 2018.

X. Lin, K. Zhang, K. Li, and D. Ren, Dependence of rheological behaviors of polymeric composites on the morphological structure of carbonaceous nanoparticles, J. Appl. Polym. Sci, vol.135, p.46416, 2018.

H. Azizi and I. Ghasemi, Investigation on the dynamic melt rheological properties of polypropylene/wood flour composites, Polym. Compos, vol.30, pp.429-435, 2009.

Y. Peng, R. Liu, and J. Cao, Characterization of surface chemistry and crystallization behavior of polypropylene composites reinforced with wood flour, cellulose, and lignin during accelerated weathering, Appl. Surf. Sci, vol.332, pp.253-259, 2015.

J. Liang, Q. Du, G. Tsui, and C. Tang, Tensile properties of graphene nanoplatelets reinforced polypropylene composites, Compos Part B Eng, vol.95, pp.166-171, 2016.

C. Badji, L. Soccalingame, H. Garay, A. Bergeret, and J. Bénézet, Influence of weathering on visual and surface aspect of wood plastic composites: Correlation approach with mechanical properties and microstructure, Polym Degrad Stabil, vol.137, pp.162-172, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02479348

J. S. Fabiyi, A. G. Mcdonald, M. P. Wolcott, and P. R. Griffiths, Wood plastic composites weathering: Visual appearance and chemical changes, Polym. Degrad. Stab, vol.93, pp.1405-1414, 2008.

L. M. Matuana, S. Jin, and N. M. Stark, Ultraviolet weathering of HDPE/woodflour composites coextruded with a clear HDPE cap layer, Polym. Degrad. Stab, vol.96, pp.97-106, 2011.

A. Pizzi and P. Tekely, Mechanism of polyphenolic tannin resin hardening by hexamethylenetetramine: CP-MAS 13C-NMR, J. Appl. Polym. Sci, vol.56, pp.1645-1650, 1995.

M. Noferi, E. Masson, A. Merlin, A. Pizzi, and X. Deglise, Antioxidant characteristics of hydrolysable and polyflavonoid tannins: An ESR kinetics study, J. Appl. Polym. Sci, vol.63, pp.475-482, 1997.

M. Theis and B. Grohe, Biodegradable lightweight construction boards based on tannin/hexamine bonded hemp shaves, Holz Als Roh-Werkst, vol.60, pp.291-296, 2002.

I. A. Hussein, Rheological investigation of the influence of molecular structure on natural and accelerated UV degradation of linear low density polyethylene, Polym. Degrad. Stab, vol.92, pp.2026-2032, 2007.

R. Sonnier, A. Taguet, L. Ferry, and J. Lopez-cuesta, Towards Bio-based Flame Retardant Polymers

P. Cinelli, I. Anguillesi, and A. Lazzeri, Green synthesis of flexible polyurethane foams from liquefied lignin, Eur. Polym. J, vol.49, pp.1174-1184, 2013.

C. Asada, S. Basnet, M. Otsuka, C. Sasaki, and Y. Nakamura, Epoxy resin synthesis using low molecular weight lignin separated from various lignocellulosic materials, Int. J. Biol. Macromol, vol.74, pp.413-419, 2015.

H. Sakai, K. Kuroda, T. Tsukegi, T. Ogoshi, K. Ninomiya et al., Butylated lignin as a compatibilizing agent for polypropylene-based carbon fiberreinforced plastics, Polym. J, vol.50, pp.997-1002, 2018.

A. Kabir, Z. Yuan, T. Kuboki, and C. Xu, De-polymerization of industrial lignins to improve the thermo-oxidative stability of polyolefins, Ind Crop, vol.120, pp.238-249, 2018.

D. Becker, J. Roeder, R. V. Oliveira, V. Soldi, and A. T. Pires, Blend of thermosetting polyurethane waste with polypropylene: influence of compatibilizing agent on interface domains and mechanical properties, Polym Test, vol.22, pp.225-230, 2003.

J. Bridson, J. Kaur, Z. Zhang, L. Donaldson, and A. Fernyhough, Polymeric flavonoids processed with co-polymers as UV and thermal stabilisers for polyethylene films, Polym Degrad Stabil, vol.122, pp.18-24, 2015.

H. Shnawa, M. Khaleel, and F. Muhamed, Oxidation of HDPE in the Presence of PVC Grafted with Natural Polyphenols (Tannins) as Antioxidant, J. Polym. Chem, pp.9-16, 2015.

W. J. Grigsby, J. H. Bridson, C. Lomas, and J. Elliot, Esterification of Condensed Tannins and Their Impact on the Properties of Poly(Lactic Acid), Polymers, vol.5, pp.344-360, 2013.

J. H. Bridson, W. J. Grigsby, and L. Main, One-pot solvent-free synthesis and characterisation of hydroxypropylated polyflavonoid compounds, Ind Crop, vol.111, pp.529-535, 2018.

H. A. Shnawa, Y. Jahani, and M. N. Khalaf, Rheological properties of PVC stabilized with tannin based epoxy resin as non metallic thermal stabilizer, vol.74, pp.1077-1090, 2017.

S. George, K. Ramamurthy, J. S. Anand, G. Groeninckx, K. T. Varughese et al., Rheological behaviour of thermoplastic elastomers from polypropylene/acrylonitrile-butadiene rubber blends: effect of blend ratio, reactive compatibilization and dynamic vulcanization, Polymer, vol.40, pp.4325-4344, 1999.

C. Nakason, A. Worlee, and S. Salaeh, Effect of vulcanization systems on properties and recyclability of dynamically cured epoxidized natural rubber/polypropylene blends, Polym. Test, vol.27, pp.858-869, 2008.

K. Børve and H. Kotlar, Preparation of high viscosity thermoplastic phenol formaldehyde polymers for application in reactive extrusion, 1998.

S. Fu, X. Feng, B. Lauke, and Y. Mai, Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites, Compos. Part B Eng, vol.39, pp.933-961, 2008.

C. Srivabut, T. Ratanawilai, and S. Hiziroglu, Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber, Constr Build Mater, vol.162, pp.450-458, 2018.

M. Canetti, F. Bertini, A. Chirico, and G. Audisio, Thermal degradation behaviour of isotactic polypropylene blended with lignin, Polym Degrad Stabil, vol.91, pp.494-498, 2006.

A. Tolbert, H. Akinosho, R. Khunsupat, A. K. Naskar, and A. J. Ragauskas, Characterization and analysis of the molecular weight of lignin for biorefining studies, Biofuels Bioprod. Biorefining, vol.8, pp.836-856, 2014.

H. Pasch, A. Pizzi, and K. Rode, MALDI-TOF mass spectrometry of polyflavonoid tannins, Polymer, vol.42, pp.7531-7539, 2001.
URL : https://hal.archives-ouvertes.fr/hal-02683246

M. Kardel, F. Taube, H. Schulz, W. Schuetze, and M. Gierus, Different approaches to evaluate tannin content and structure of selected plant extracts-review and new aspects, J. Appl. Bot. Food Qual, vol.86, pp.154-66, 2013.

M. Brebu and C. Vasile, Thermal degradation of lignin-a review, Cellul. Chem. Technol, vol.44, pp.353-363, 2010.

Y. Jahani, Comparison of the effect of mica and talc and chemical coupling on the rheology, morphology, and mechanical properties of polypropylene composites, Polym Advan Technol, vol.22, pp.942-950, 2011.

M. Bailly and M. Kontopoulou, Preparation and characterization of thermoplastic olefin/nanosilica composites using a silane-grafted polypropylene matrix, Polymer, vol.50, pp.2472-2480, 2009.

P. Hornsby and A. Mthupha, Rheological characterization of polypropylene filled with magnesium hydroxide, J Mater Sci, vol.29, pp.5293-5301, 1994.

Y. Lv, Y. Huang, J. Yang, M. Kong, H. Yang et al., Outdoor and accelerated laboratory weathering of polypropylene: A comparison and correlation study, Polym Degrad Stabil, vol.112, pp.145-159, 2015.

L. Soccalingame, D. Perrin, J. Bénézet, S. Mani, F. Coiffier et al., Reprocessing of artificial UV-weathered wood flour reinforced polypropylene composites, Polym. Degrad. Stab, vol.120, pp.313-327, 2015.

N. Zaaba, H. Ismail, and M. Jaafar, A study of the degradation of compatibilized and uncompatibilized peanut shell powder/recycled polypropylene composites due to natural weathering, J Vinyl Addit Technol, vol.23, pp.290-297, 2017.

J. Liu, L. Sun, W. Xu, Q. Wang, S. Yu et al., Current advances and future perspectives of 3D printing natural-derived biopolymers, Carbohydr. Polym, vol.207, pp.297-316, 2019.

K. S. Boparai and R. Singh, Advances in Fused Deposition Modeling, In Reference Module in Materials Science and Materials Engineering, 2017.

C. Vila, V. Santos, B. Saake, J. C. Parajó, and . Manufacture, Characterization, and Properties of Poly-(lactic acid) and its Blends with Esterified Pine Lignin, BioResources, vol.11, pp.5322-5332, 2016.

B. C. Smith, . The, and . Bond, Part IV: Acid Anhydrides Available online, vol.16, 2019.

I. Spiridon, K. Leluk, A. M. Resmerita, and R. N. Darie, Evaluation of PLA-lignin bioplastics properties before and after accelerated weathering, Compos. Part B Eng, vol.69, pp.342-349, 2015.

L. Zhang, S. Lv, C. Sun, L. Wan, H. Tan et al., Effect of MAH-g-PLA on the Properties of Wood Fiber/Polylactic Acid Composites, vol.9, p.591, 2017.

A. J. Müller, M. Ávila, G. Saenz, J. Salazar, and . Chapter, Crystallization of PLA-based Materials, In Polymer Chemistry Series, pp.66-98, 2014.

S. Lyu and D. Untereker, Degradability of Polymers for Implantable Biomedical Devices, Int. J. Mol. Sci, vol.10, pp.4033-4065, 2009.

Y. Tokiwa and B. P. Calabia, Biodegradability and biodegradation of poly(lactide)

, Appl. Microbiol. Biotechnol, vol.72, pp.244-251, 2006.

M. Karamanlioglu, R. Preziosi, and G. D. Robson, Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review, Polym. Degrad. Stab, vol.137, pp.122-130, 2017.

M. Boruvka, L. Behalek, P. Lenfeld, C. Ngaowthong, and M. Pechociakova, Structure-related properties of bionanocomposites based on poly(lactic acid), cellulose nanocrystals and organic impact modifier, Mater. Technol, vol.34, pp.143-156, 2019.

G. H. Yew, A. M. Mohd-yusof, Z. A. Ishak, and U. S. Ishiaku, Water absorption and enzymatic degradation of poly(lactic acid)/rice starch composites, Polym. Degrad. Stab, vol.90, pp.488-500, 2005.

M. A. Elsawy, K. Kim, J. Park, and A. Deep, Hydrolytic degradation of polylactic acid (PLA) and its composites, Renew. Sustain. Energy Rev, vol.79, pp.1346-1352, 2017.

L. E. Scheyer and A. Chiweshe, Application and Performance of Disperse Dyes on Polylactic Acid (PLA) Fabric, AATCC Rev, p.5, 2001.

L. Mantia, F. P. Morreale, and M. , Green composites: A brief review, Compos. Part Appl. Sci. Manuf, vol.42, pp.579-588, 2011.

L. Lim, R. Auras, and M. Rubino, Processing technologies for poly

, Prog. Polym. Sci, vol.33, pp.820-852, 2008.

M. S. Huda, L. T. Drzal, A. K. Mohanty, and M. Misra, Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative study, Compos. Sci. Technol, vol.66, pp.1813-1824, 2006.

K. Jha, R. Kataria, J. Verma, and S. Pradhan, Potential biodegradable matrices and fiber treatment for green composites: A review, Mater, vol.6, pp.119-138, 2019.

M. Murariu and P. Dubois, PLA composites: From production to properties, Adv. Drug Deliv. Rev, vol.107, pp.17-46, 2016.

H. Wang, X. Sun, and P. Seib, Mechanical properties of poly(lactic acid) and wheat starch blends with methylenediphenyl diisocyanate, J. Appl. Polym. Sci, vol.84, pp.1257-1262, 2002.

L. Yu, E. Petinakis, K. Dean, H. Liu, and Q. Yuan, Enhancing compatibilizer function by controlled distribution in hydrophobic polylactic acid/hydrophilic starch blends, J. Appl. Polym. Sci, vol.119, pp.2189-2195, 2011.

S. Krishnan, M. Smita, and K. N. Sanjay, Renewable Resource based blends of Polylactic acid (PLA) and Thermoplastic starch (TPS) using Novel Reactive Compatibilization -ProQuest, J. Polym. Mater, vol.34, pp.525-538, 2017.

B. Baek, J. Park, B. Lee, and H. Kim, Development and Application of Green Composites: Using Coffee Ground and Bamboo Flour, J. Polym. Environ, vol.21, pp.702-709, 2013.

S. Sahoo, M. Misra, and A. K. Mohanty, Enhanced properties of lignin-based biodegradable polymer composites using injection moulding process, Compos. Part Appl. Sci. Manuf, vol.42, pp.1710-1718, 2011.

F. Braghiroli, V. Fierro, A. Pizzi, K. Rode, W. Radke et al., Reaction of condensed tannins with ammonia, Ind. Crops Prod, vol.44, pp.330-335, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01296299

K. Kida, M. Suzuki, A. Takagaki, and F. Nanjo, Deodorizing Effects of Tea Catechins on Amines and Ammonia, Biosci. Biotechnol. Biochem, vol.66, pp.373-377, 2002.

K. Hashida, R. Makino, and S. Ohara, Amination of pyrogallol nucleus of condensed tannins and related polyphenols by ammonia water treatment, Holzforschung, vol.63, pp.319-326, 2008.

J. Zhu, H. Zhu, K. Immonen, J. Brighton, and H. Abhyankar, Improving mechanical properties of novel flax/tannin composites through different chemical treatments, Ind. Crops Prod, vol.67, pp.346-354, 2015.

Y. Lu, M. C. Cueva, E. Lara-curzio, and S. Ozcan, Improved mechanical properties of polylactide nanocomposites-reinforced with cellulose nanofibrils through interfacial engineering via amine-functionalization, Carbohydr. Polym, vol.131, pp.208-217, 2015.

P. Georgiopoulos, E. Kontou, and G. Georgousis, Effect of silane treatment loading on the flexural properties of PLA/flax unidirectional composites, Compos. Commun, vol.10, pp.6-10, 2018.

M. Rahmat, M. Karrabi, I. Ghasemi, M. Zandi, and H. Azizi, Silane crosslinking of electrospun poly (lactic acid)/nanocrystalline cellulose bionanocomposite, Mater. Sci. Eng. C, vol.68, pp.397-405, 2016.

K. S. Chun, S. Husseinsyah, and H. Osman, Mechanical and thermal properties of coconut shell powder filled polylactic acid biocomposites: effects of the filler content and silane coupling agent, J. Polym. Res, vol.19, p.9859, 2012.

X. Meng, N. A. Nguyen, H. Tekinalp, E. Lara-curzio, and S. Ozcan, Supertough PLA-Silane Nanohybrids by in Situ Condensation and Grafting, ACS Sustain. Chem. Eng, vol.6, pp.1289-1298, 0200.

C. Yamoum, J. Maia, and R. Magaraphan, Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates, vol.28, pp.102-112, 2017.

J. Borda, I. Bodnár, S. Kéki, L. Sipos, and M. Zsuga, Optimum conditions for the synthesis of linear polylactic acid-based urethanes, J. Polym. Sci. Part Polym. Chem, vol.38, pp.2925-2933, 2000.

D. H. Droste and A. T. Dibenedetto, The glass transition temperature of filled polymers and its effect on their physical properties, J. Appl. Polym. Sci, vol.13, pp.2149-2168, 1969.

Y. Zuo and . Feng,

J. Gu, Z. Qiao, H. Tan, J. Cao, and Y. Zhang, Effects of dry method esterification of starch on the degradation characteristics of starch/polylactic acid composites, Int. J. Biol. Macromol, vol.72, pp.391-402, 2015.

A. N. Frone, S. Berlioz, J. Chailan, and D. M. Panaitescu, Morphology and thermal properties of PLA-cellulose nanofibers composites, Carbohydr. Polym, vol.91, pp.377-384, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01364144

H. Wang, X. Sun, and P. Seib, Strengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate, J. Appl. Polym. Sci, vol.82, pp.1761-1767, 2001.

T. Ke and X. Sun, Physical Properties of Poly(Lactic Acid) and Starch Composites with Various Blending Ratios, Cereal Chem, vol.77, pp.761-768, 2000.

S. Lee, I. Kang, G. Doh, H. Yoon, B. Park et al., Thermal and Mechanical Properties of Wood Flour/Talc-filled Polylactic Acid Composites: Effect of Filler Content and Coupling Treatment, J. Thermoplast. Compos. Mater, vol.21, pp.209-223, 2008.

N. Brosse and A. Pizzi, Tannins for wood adhesives, foams and composites. In Bio-based Wood Adhesives Preparation, characterization, and Testing, pp.197-220, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01961798

D. E. Garcia, J. C. Carrasco, J. P. Salazar, M. A. Perez, R. A. Cancino et al., Bark polyflavonoids from Pinus radiata as functional building-blocks for polylactic acid (PLA)-based green composites, Express Polym. Lett, vol.10, pp.835-848, 2016.

Y. Wang, Y. Weng, and L. Wang, Characterization of interfacial compatibility of polylactic acid and bamboo flour (PLA/BF) in biocomposites, Polym. Test, vol.36, pp.119-125, 2014.

T. Semba, K. Kitagawa, U. S. Ishiaku, and H. Hamada, The effect of crosslinking on the mechanical properties of polylactic acid/polycaprolactone blends, J. Appl. Polym. Sci, vol.101, pp.1816-1825, 2006.

L. Wei and A. G. Mcdonald, Peroxide induced cross-linking by reactive melt processing of two biopolyesters: Poly(3-hydroxybutyrate) and poly(l-lactic acid) to improve their melting processability, J. Appl. Polym. Sci, p.132, 0201.

P. Ma, X. Cai, Y. Zhang, S. Wang, W. Dong et al., Insitu compatibilization of poly(lactic acid) and poly(butylene adipate-co-terephthalate) blends by using dicumyl peroxide as a free-radical initiator, Polym Degrad Stabil, vol.102, pp.145-151, 2014.

M. Takamura, T. Nakamura, T. Takahashi, and K. Koyama, Effect of type of peroxide on cross-linking of poly(l-lactide), Polym. Degrad. Stab, vol.93, pp.1909-1916, 2008.

K. Choi, M. Choi, D. Han, T. Park, and C. Ha, Plasticization of poly(lactic acid) (PLA) through chemical grafting of poly(ethylene glycol) (PEG) via in situ reactive blending, Eur Polym J, vol.49, pp.2356-2364, 2013.

F. Quero, S. J. Eichhorn, M. Nogi, H. Yano, K. Lee et al., Interfaces in Cross-Linked and Grafted Bacterial Cellulose/Poly(Lactic Acid) Resin Composites, J. Polym. Environ, vol.20, pp.916-925, 2012.

J. R. Dorgan, J. S. Williams, and D. N. Lewis, Melt rheology of poly(lactic acid): Entanglement and chain architecture effects, J. Rheol, vol.43, pp.1141-1155, 1999.

J. Du, Y. Wang, X. Xie, M. Xu, and Y. Song, Styrene-Assisted Maleic Anhydride Grafted Poly(lactic acid) as an Effective Compatibilizer for Wood Flour/Poly(lactic acid) Bio-Composites, vol.9, p.623, 2017.

H. Kaczmarek, M. Nowicki, I. Vukovi?-kwiatkowska, and S. Nowakowska, Crosslinked blends of poly(lactic acid) and polyacrylates: AFM, DSC and XRD studies, J. Polym. Res, p.91, 1920.

M. ?enkiewicz, R. Malinowski, P. Rytlewski, A. Richert, W. Sikorska et al., Some composting and biodegradation effects of physically or chemically crosslinked poly(lactic acid), Polym. Test, vol.31, pp.83-92, 2012.

W. Dong, P. Ma, S. Wang, M. Chen, X. Cai et al., Effect of partial crosslinking on morphology and properties of the poly(?-hydroxybutyrate)/poly(d,llactic acid) blends, Polym. Degrad. Stab, vol.98, pp.1549-1555, 2013.

T. M. Quynh, H. Mitomo, N. Nagasawa, Y. Wada, F. Yoshii et al., Properties of crosslinked polylactides (PLLA & PDLA) by radiation and its biodegradability, Eur. Polym. J, vol.43, pp.1779-1785, 2007.

N. Graupner, Application of lignin as natural adhesion promoter in cotton fibrereinforced poly(lactic acid) (PLA) composites, J. Mater. Sci, vol.43, pp.5222-5229, 2008.

H. Y. Son, H. Jun, K. R. Kim, C. A. Hong, and Y. S. Nam, Tannin-mediated assembly of gold-titanium oxide hybrid nanoparticles for plasmonic photochemical applications, J. Ind. Eng. Chem, vol.63, pp.420-425, 2018.

L. Panzella and A. Napolitano, Natural Phenol Polymers: Recent Advances in Food and Health Applications, vol.6, p.30, 2017.