Y. Suryawanshi, P. Sanap, and V. Wani, Advances in the synthesis of non-isocyanate polyurethanes

, Polymer Bulletin, vol.76, issue.6, pp.3233-3246, 2019.

N. Kihara and T. Endo, Synthesis and properties of poly(hydroxyurethane)s. J

. Polym, . Sc1, and A. Part, Polym. Chem, vol.31, pp.2765-2773, 1993.

N. Kihara, Y. Kushida, and T. Endo, Optically active poly(hydroxyurethane)s derived from cyclic carbonate and L-lysine derivatives, J. Polym. Sc1

. Chem, , vol.34, pp.2173-2179, 1996.

H. Tomita, F. Sanda, and T. Endo, Structural analysis of polyhydroxyurethane obtained by polyaddition of bifunctional five-membered cyclic carbonate and diamine based on the model reaction, J. Polym. Sc1., Part A: Polym. Chem, vol.39, pp.851-859, 2001.

H. Tomita, F. Sanda, and T. Endo, Polyaddition behavior of bis(five-and six-membered cyclic carbonate)s with diamine, J. Polym. Sc1., Part A: Polym. Chem, vol.39, pp.860-867, 2001.

H. Tomita, F. Sanda, and T. Endo, Model reaction for the synthesis of polyhydroxyurethanes from cyclic carbonates with amines: Substituent effect on the reactivity and selectivity of ring-opening direction in the reaction of five-membered cyclic carbonates with amine, J. Polym. Sc1., Part A: Polym. Chem, vol.39, pp.3678-3685, 2001.

O. Birukov, R. Potashnikova, A. Leykin, O. Figovsky, and L. Shapovalov, Advantages in chemistry and technology of non-isocyanate polyurethane, J. Sc1

. Israel-technol, Adv, vol.11, pp.160-167, 2009.

O. Figovsky and L. Shapovalov, Features of reaction amino-cyclocarbonate for production of new type polyurethanes, Macromol. Symp, vol.187, pp.325-332, 2002.

F. Camara, S. Benyahya, V. Besse, G. Boutevin, R. Auvergne et al., Reactivity of secondary amines for the synthesis of nonisocyanate polyurethanes, Eur. Polym. J, vol.55, pp.17-26, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00974426

H. Blattmann, M. ;. Fleischer, M. Bähr, and R. Mülhaupt, Isocyanate-and phosgene-free routes to polyfunctional cyclic carbonates and green polyurethanes by fixation of carbon dioxide, Macromol. Rapid Commun, vol.35, pp.1238-1254, 2014.

A. Boyer, E. Cloutet, T. Tassaing, B. Gadenne, C. Alfos et al., Solubility in CO2 and carbonation studies of epoxidized fatty acid diesters: Towards novel precursors for polyurethane synthesis, Green Chem, vol.12, pp.2205-2213, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00679371

M. Kim, H. Kim, C. Ha, D. Park, and J. Lee, Syntheses and REFERENCES 51 condensed tannin-based polyurethanes, Eur. Polym. J, vol.67, pp.513-523, 2015.

M. Thébault, A. Pizzi, F. J. Santiago-medina, F. M. Al-marzouki, and S. Abdalla,

, Isocyanate-free polyurethanes by coreaction of condensed tannins with aminated tannins, J. Renew. Mat, vol.5, pp.21-29, 2017.

F. J. Santiago-medina, M. C. Basso, A. Pizzi, and L. Delmotte, , 2018.

, Polyurethanes from Kraft Lignin without Using Isocyanates. J.Renew.Mat, vol.6, issue.4, pp.413-425

X. Xi, A. Pizzi, and L. Delmotte, Isocyanate-Free Polyurethane Coatings and Adhesives from Mono-and Di-Saccharides, J]. Polymers, vol.10, issue.4, p.402, 2018.

X. Xi, Z. Wu, and A. Pizzi, Non-isocyanate polyurethane adhesive from sucrose used for particleboard

, Wood Science and Technology, vol.2019, pp.1-13

X. Xi, A. Pizzi, and C. Gerardin, Glucose-biobased Non-Isocyanate Polyurethane Rigid Foams

, J Renew Mater, pp.1-11, 2018.

S. Amar?ija-jovanovi?, V. Jovanovi?, S. Konstantinovi?, G. Markovi?, and M. Marinovi?-cincovi?, Thermal behavior of modified urea-formaldehyde resins, Journal of thermal analysis and calorimetry, vol.104, issue.3, pp.1159-1166, 2011.

J. M. Barton, The application of differential scanning calorimetry (DSC) to the study of epoxy resin curing reactions, Epoxy resins and composites I, pp.111-154, 1985.

C. Amen-chen, B. Riedl, and C. Roy, Softwood bark pyrolysis oil-PF resols. Part 2. Thermal analysis by DSC and TG, Holzforschung, vol.56, issue.3, pp.273-280, 2002.

B. D. Park, B. Riedl, H. J. Bae, and Y. S. Kim, Differential scanning calorimetry of phenol-formaldehyde (PF) adhesives, Journal of wood chemistry and technology, vol.19, issue.3, pp.265-286, 1999.

A. Gaitas, S. Gianchandani, and W. Zhu, A piezo-thermal probe for thermomechanical analysis, Review of Scientific Instruments, vol.82, issue.5, p.53701, 2011.

A. Pizzi, R. Garcia, and X. Deglise, Thermomechanical analysis of entanglement networks -Correlation of some calculated and experimental parameters, J.Appl.Polymer Sci, vol.67, issue.9, pp.1673-1678, 1998.

Y. Laigle, C. Kamoun, A. Pizzi, and I. B. Particleboard, forecast by TMA bending in UF adhesives curing, Holz Roh Werkstoff, vol.56, issue.3, p.154, 1998.

C. Zhao, S. Garnier, and A. Pizzi, Particlebord dry and wet IB forecasting by gel time and dry TMA bending in PF wood adhesives, Holz Roh Werkstoff, vol.56, issue.6, p.402

D. García, W. Glasser, and T. Pizzi, Synthesis and physicochemical properties of hydroxypropyl tannins from maritime pine bark (Pinus pinaster Ait

, Holzforschung, vol.68, issue.4, pp.411-418, 2014.

G. Marrero, D. Glasser, W. Pizzi, and A. , Substitution pattern elucidation of hydroxypropyl Pinus pinaster (Ait.) bark polyflavonoid derivatives by ESI (?)-MS/MS, J]. Journal of Mass Spectrometry, vol.49, issue.10, pp.1050-1058, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01597793

D. García, W. Glasser, and A. Pizzi, Hydroxypropyl tannin from Pinus pinaster bark as polyol source in urethane chemistry

, European Polymer Journal, vol.67, pp.152-165, 2015.

L. Wu and W. Glasser, Engineering plastics from lignin. 1. Synthesis of hydroxypropyl lignin, J]. Journal of Applied Polymer Science, vol.29, issue.4, pp.1111-1123, 1984.

M. Basso, A. Pizzi, and C. Lacoste, MALDI-TOF and 13C NMR analysis of tannin-furanic-polyurethane foams adapted for industrial continuous lines application
URL : https://hal.archives-ouvertes.fr/hal-01597749

, Polymers, vol.6, issue.12, pp.2985-3004, 2014.

N. Meikleham and A. Pizzi, Acid-and alkali-catalyzed tannin-based rigid foams, Journal of Applied Polymer Science, vol.53, issue.11, pp.1547-1556, 1994.

M. Basso, X. Li, and V. Fierro, formaldehyde-free, foams for thermal insulation

, Adv. Mater. Lett, vol.2, issue.6, pp.378-382, 2011.

X. Li, A. Pizzi, and X. Zhou, Formaldehyde-Free Prorobitenidin/Profi setinidin Tannin/Furanic Foams Based on Alternative Aldehydes: Glyoxal and Glutaraldehyde, vol.3, pp.142-150, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01294584

M. Basso, S. Giovando, and A. Pizzi, Tannin/furanic foams without blowing agents and formaldehyde, Industrial crops and products, vol.49, pp.17-22, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01295730

M. Basso, S. Giovando, and A. Pizzi, Alkaline tannin rigid foams, vol.2, pp.182-185, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01295528

M. Lagel, A. Pizzi, and S. Giovando, Development and characterisation of phenolic foams with phenol-formaldehyde-chestnut tannins resin, vol.2, pp.220-229, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01295529

X. Li, M. Basso, and V. Fierro, Chemical modification of tannin/furanic rigid foams by isocyanates and polyurethanes

. Maderas and . Ciencia-y-tecnología, , vol.14, pp.257-265, 2012.

G. Rangel, H. Chapuis, and M. Basso, Improving Water Repellence and Friability of Tannin-Furanic Foams by Oil-Grafted Flavonoid Tannins
URL : https://hal.archives-ouvertes.fr/hal-01599595

, BioResources, vol.11, issue.3, pp.7754-7768, 2016.

F. Antiago-medina, C. Delgado-sánchez, and M. Basso, Mechanically blown wall-projected tannin-based foams, Industrial crops and products, vol.113, pp.316-323, 2018.

F. Santiago-medina, A. Tenorio-alfonso, and C. Delgado-sánchez,

, Projectable tannin foams by mechanical and chemical expansion, J]. Industrial Crops and Products, vol.120, pp.90-96, 2018.

X. Li, A. Pizzi, and M. Cangemi, Flexible natural tannin-based and protein-based biosourced foams, Industrial Crops and Products, vol.37, issue.1, 2012.

M. Basso, S. Giovando, and A. Pizzi, Flexible-elastic copolymerized polyurethane-tannin foams, Journal of Applied Polymer Science, issue.13, p.131, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01295582

C. Delgado-sánchez, G. Amaral-labat, and L. Grishechko, Fire-resistant tannin-ethylene glycol gels working as rubber springs with tuneable elastic properties, J]. Journal of Materials Chemistry A, vol.5, issue.28, pp.14720-14732, 2017.

C. Lacoste, M. Basso, and A. Pizzi, Pine (P. pinaster) and quebracho (S. lorentzii) tannin-based foams as green acoustic absorbers, Industrial Crops and Products, vol.67, pp.70-73, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01294760

G. Tondi, V. Fierro, and A. Pizzi, Tannin-based carbon foams
URL : https://hal.archives-ouvertes.fr/hal-02461949

, Carbon, vol.47, issue.6, pp.1480-1492, 2009.

E. Dyer and H. Scott, The preparation of polymeric and cyclic urethans and ureas from ethylene carbonate and amines, Journal of the American Chemical Society, vol.79, issue.3, pp.672-675, 1957.

O. Figovsky, L. Shapovalov, and F. Buslov, Ultraviolet and thermostable non-isocyanate polyurethane coatings

, Surface Coatings International Part B: Coatings Transactions, vol.88, issue.1, pp.67-71, 2005.

O. Figovsky, L. Shapovalov, and O. Axenov, Advanced coatings based upon non-isocyanate polyurethanes for industrial applications, Surface Coatings International Part B: Coatings Transactions, vol.87, pp.83-90, 2004.

G. Liu, G. Wu, and J. Chen, Synthesis, modification and properties of rosin-based non-isocyanate polyurethanes coatings, Progress in Organic Coatings, vol.101, pp.461-467, 2016.

G. Liu, G. Wu, and J. Chen, Synthesis and properties of POSS-containing gallic acid-based non-isocyanate polyurethanes coatings, Polymer degradation and stability, vol.121, pp.247-252, 2015.

M. Kathalewar, A. Sabnis, and G. Waghoo, Effect of incorporation of surface treated zinc oxide on non-isocyanate polyurethane based nano-composite coatings

, Progress in Organic Coatings, vol.76, issue.9, pp.1215-1229, 2013.

X. Wang and M. D. Soucek, Investigation of non-isocyanate urethane dimethacrylate reactive diluents for UV-curable polyurethane coatings, Progress in Organic Coatings, pp.1057-1067, 2013.

M. Kathalewar, A. Sabnis, D. Mello, and D. , Isocyanate free polyurethanes from new CNSL based bis-cyclic carbonate and its application in coatings

, European Polymer Journal, vol.57, pp.99-108, 2014.

O. Figovsky, L. Shapovalov, . D.-;-//macromolecular-symposia, O. Weinheim-;-figovsky, and L. Shapovalov, Features of reaction amino-cyclocarbonate for production of new type nonisocyanate polyurethane, /Macromolecular Symposia, vol.187, issue.1, pp.325-332, 2002.

R. Pathak, M. Kathalewar, and K. Wazarkar, Non-isocyanate polyurethane (NIPU) from tris-2-hydroxy ethyl isocyanurate modified fatty acid for coating applications, Progress in Organic Coatings, vol.89, pp.160-169, 2015.

Z. Wu, W. Cai, and R. Chen, Synthesis and properties of ambient-curable non-isocyanate polyurethanes, Progress in Organic Coatings, vol.119, pp.116-122, 2018.

S. Schmidt, B. Ritter, and D. Kratzert, Isocyanate-free route to poly (carbohydrate-urethane) thermosets and 100% bio-based coatings derived from glycerol feedstock

, Macromolecules, vol.49, issue.19, pp.7268-7276, 2016.

G. Liu, G. Wu, and S. Huo, Synthesis and properties of non-isocyanate polyurethane coatings derived from cyclic carbonate-functionalized polysiloxanes

, Progress in Organic Coatings, vol.112, pp.169-175, 2017.

S. Doley and S. K. Dolui, Solvent and catalyst-free synthesis of sunflower oil based polyurethane through non-isocyanate route and its coatings properties

, European Polymer Journal, vol.102, pp.161-168, 2018.

A. Mahendran, G. Wuzella, and N. Aust, Synthesis, characterization, and References

J. M. Bobbitt, Periodate oxidation of carbohydrates, Adv Carbohydr Chem, vol.11, pp.1-41, 1956.

C. R. Frihart and L. Lorenz, Specific oxidants improve the wood bonding strength of soy and other plant flours, J Polym Sci A: Polym Chem, vol.57, pp.1017-1023, 2019.

A. Pizzi, Tannin based adhesives, Adhesives Chemistry and Technology, vol.1, 1983.
URL : https://hal.archives-ouvertes.fr/hal-01599584

S. Drovou, A. Pizzi, C. Lacoste, J. Zhang, S. Abdalla et al., Flavonoid tannins linked to long carbohydrate chains -MALDI ToF analysis of the tannin extract of the african locust bean, Ind Crops Prods, vol.67, pp.25-32, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01598433

, Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels. China National Institute of Standardization, Shenzen, China National Standard GB/T17657-2013, pp.1-24, 2013.

C. Kamoun, A. Pizzi, and R. Garcia, The effect of humidity on cross-linked and entanglement networking of formaldehyde-based wood adhesives, Holz Roh Werkst, vol.56, pp.235-243, 1998.

A. Pizzi, On the correlation equations of liquid and solid 13 C NMR, TMA, Tg and network strength in polycondensation resins, J Appl Polym Sci, vol.71, pp.1703-1709, 1999.

Y. Laigle, C. Kamoun, P. A. Particleboard, and I. B. , forecast by TMA bending in UF adhesives curing, Holz Roh Werkst, vol.56, p.154, 1998.

M. Lecourt, P. Humphrey, and A. Pizzi, Comparison of TMA and ABES as forecasting systems of wood bonding effectiveness, Holz Roh Werkst, vol.61, pp.75-76, 2003.

C. Zhao, S. Garnier, and A. Pizzi, Particlebord dry and wet IB forecasting by gel time and dry TMA bending in PF wood adhesives, Holz Roh Werkst, vol.56, p.402, 1998.

S. Garnier, Z. Huang, and A. Pizzi, Commercial tannin adhesives-bonded particleboard IB forecasting by TMA bending, Holz Roh Werkst, vol.9, p.46, 2001.

H. Pasch, A. Pizzi, and K. Rode, MALDI-TOF mass spectrometry of polyflavonoid tannins, Polymer, vol.42, pp.7531-7539, 2001.

H. Pasch and A. Pizzi, On the macromolecular structure of chestnut ellagitannins by MALDI-TOF mass spectrometry, J Appl Polym Sci, vol.85, pp.429-437, 2002.

P. Navarrete, A. Pizzi, H. Pasch, K. Rode, and L. Delmotte, MALDI-TOF and 13C NMR characterisation of maritime pine industrial tannin extract, Ind.Crops & Prod, vol.32, issue.2, pp.105-110, 2010.

J. Mcmurray, Organic Chemistry 3 rd edition, 1992.

, 5-CHO with Na+ and/or Gall-Glyox-Gall

=. Da and . Fis,

=. Da and . Fis,

=. Da and . Cat,

=. Da and . Cat,

, -Fis no Na+ and/or Fis, p.5

A. Pizzi, Advanced wood adhesives technology

M. Dunky, Urea-formaldehyde (UF) adhesive resins for wood, International Journal of Adhesion and Adhesives, vol.18, issue.2, pp.95-107, 1998.

H. Lei, G. Du, and A. Pizzi, Influence of nanoclay on urea-formaldehyde resins for wood adhesives and its model, Journal of Applied Polymer Science, vol.109, issue.4, pp.2442-2451, 2008.

A. Pizzi, Melamine-formaldehyde adhesives, Handbook of Adhesive Technology, pp.653-679, 2003.
URL : https://hal.archives-ouvertes.fr/hal-01593358

D. Merline, S. Vukusic, and A. Abdala, Melamine formaldehyde: curing studies and reaction mechanism, J]. Polymer journal, vol.45, issue.4, p.413, 2013.

C. Hse, Wettability of southern pine veneer by phenol formaldehyde wood adhesives

, Forest Products Journal, vol.22, issue.1, pp.51-56, 1972.

A. Pizzi and A. Stephanou, Phenol-formaldehyde wood adhesives under very alkaline conditions. Part II: Esters curing acceleration, its mechanism and applied results

H. Lei, G. Du, and A. Pizzi, Influence of nanoclay on phenol-formaldehyde and phenol-urea-formaldehyde resins for wood adhesives, Journal of Adhesion Science and Technology, pp.1567-1576, 2010.

A. Pizzi, Wood products and green chemistry, Annals of forest science, vol.73, issue.1, pp.185-203, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01284230

. Gao-z and . Gu-h, Preparation and Characterization of Wood Adhesives with Strong Alkali-Degraded Soybean Proteins, Polymer Materials Science & Engineering, p.11, 2010.

Z. Wu, H. Lei, and G. Du, Disruption of soy-based adhesive treated by Ca (OH) 2 and NaOH, Journal of Adhesion Science and Technology, vol.27, issue.20, pp.2226-2232, 2013.

Y. Liu and K. Li, Chemical modification of soy protein for wood adhesives

, Macromolecular Rapid Communications, vol.23, issue.13, pp.739-742, 2002.

N. Hettiarachchy, U. Kalapathy, and D. J. Myers, Alkali-modified soy protein with improved adhesive and hydrophobic properties, Journal of the American Oil Chemists' Society, vol.72, issue.12, pp.1461-1464, 1995.

H. Cheng, M. Dowd, and Z. He, Investigation of modified cottonseed protein adhesives for wood composites, Industrial crops and products, vol.46, pp.399-403, 2013.

D. Vnu?ec, A. Kutnar, and A. Gor?ek, Soy-based adhesives for wood-bonding-a review, Journal of adhesion science and Technology, issue.8, pp.910-931, 2017.

A. Pizzi, Bioadhesives for wood and fibres, J]. Reviews of Adhesion and Adhesives, vol.1, issue.1, pp.88-113, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01591844

H. Lei, Z. Wu, and M. Cao, Study on the soy protein-based wood adhesive modified by hydroxymethyl phenol

, Polymers, vol.8, issue.7, p.256, 2016.

K. Li, S. Peshkova, and X. Geng, Investigation of soy protein-Kymene® adhesive systems for wood composites, Journal of the American Oil Chemists' Society, vol.81, issue.5, pp.487-491, 2004.

Y. Zhang, W. Zhu, and Y. Lu, Water-resistant soybean adhesive for wood binder employing combinations of caustic degradation, nano-modification, and chemical crosslinking

, BioResources, vol.8, issue.1, pp.1283-1291, 2013.

Z. Wu, X. Xi, and H. Lei, Soy-based adhesive cross-linked by phenolformaldehyde-glutaraldehyde

, Polymers, vol.9, issue.5, p.169, 2017.

Y. Zhang, W. Zhu, and Y. Lu, Nano-scale blocking mechanism of MMT and its effects on the properties of polyisocyanate-modified soybean protein adhesive

, Industrial Crops and Products, vol.57, pp.35-42, 2014.

Y. Liu and K. Li, Development and characterization of adhesives from soy protein for bonding wood, International Journal of Adhesion and Adhesives, vol.27, issue.1, pp.59-67, 2007.

K. Li and X. Geng, Formaldehyde-Free Wood Adhesives from Decayed Wood

, Macromolecular Rapid Communications, vol.26, issue.7, pp.529-532, 2005.

, China National Standard GB/T 14074. Testing methods for wood adhesives and their resins, 2006.

, China National Standard GB/T17657. Test methods for evaluating the properties of wood-based panels and surface decorated wood-based panels, 1999.

, European Committee for Standardisation European European Norm EN 636:2012, Plywood -specification, European Committee for Standardization: Brussels, 2012.

X. Xi, A. Pizzi, and S. Amirou, Melamine-Glyoxal-Glutaraldehyde Wood Panel Adhesives without Formaldehyde

, Polymers, vol.10, issue.1, p.22, 2018.

Y. Laigle, C. Kamoun, and A. Pizzi, Particleboard 1.B. forecast by TMA bending in UF adhesivescuring

, Holz Roh Werkst, vol.56, p.154, 1998.

M. Lecourt, P. Humphrey, and A. Pizzi, Comparison of TMA and ABES as forecasting systems of wood bonding effectiveness

, Holz Roh Werkst, vol.61, pp.75-76, 2003.

B. D. Park, B. Riedl, H. J. Bae, and Y. S. Kim, Differential scanning calorimetry of phenol-formaldehyde (PF) adhesives, Journal of wood chemistry and technology, vol.19, issue.3, pp.265-286, 1999.

G. Vázquez, J. González-Álvarez, and G. Antorrena, Curing of a phenol-formaldehyde-tannin adhesive in the presence of wood: Analysis by differential scanning calorimetry, Journal of thermal analysis and calorimetry, vol.84, issue.3, pp.651-654, 2006.

Q. Lin, N. Chen, and L. Bian, Development and mechanism characterization of high performance soy-based bio-adhesives, International journal of adhesion and adhesives, vol.34, pp.11-16, 2012.

V. Schmidt, C. Giacomelli, and V. Soldi, Thermal stability of films formed by soy protein isolate-sodium dodecyl sulfate, Polymer Degradation and Stability, vol.87, issue.1, pp.25-31, 2005.

R. Bel-hassen, S. Boufi, M. C. Salon, M. Abdelmouleh, and M. N. Belgacem, Adsorption of silane onto cellulose fibers. II. The effect of pH on silane hydrolysis, condensation, and adsorption behavior, J appl polym sci, vol.108, issue.3, pp.1958-1968, 2008.

, Testing methods for wood adhesives and their resins, 2006.

, Test methods for evaluating the properties of wood-based panels and surface decorated wood-based panels

, Requirements for load-bearing boards for use in humid conditions, China National Standard GBT, vol.4897, pp.5-2003, 2003.

T. E. Creighton, Proteins: structures and molecular properties

C. Del-menezzi, S. Amirou, A. Pizzi, X. Xi, and L. Delmotte, Reactions with Wood Carbohydrates and Lignin of Citric Acid as a Bond Promoter of Wood Veneer Panels, Polymers, vol.10, issue.8, p.833, 2018.

F. Eslah, M. Jonoobi, M. Faezipour, M. Afsharpour, and A. A. Enayati, Preparation and development of a chemically modified bio-adhesive derived from soybean flour protein, Int. J. Adhesion Adhesives, vol.71, pp.48-54, 2016.

, European Committee for Standardisation European European Norm EN, vol.636, p.2012, 2012.

, European Committee for Standardisation European European Norm EN312, pp.plywood -specifications, 2003.

Z. H. Gao, Y. H. Zhang, B. Fang, L. P. Zhang, and J. Shi, The effects of thermal-acid treatment and crosslinking on the water resistance of soybean protein, Ind. Crop. Prod, vol.74, pp.122-131, 2015.

C. Gui, G. Wang, D. Wu, J. Zhu, and X. Liu, Synthesis of a bio-based polyamidoamine-epichlorohydrin resin and its application for soy-based adhesives, Int. J. Adhes. Adhes, vol.44, pp.237-242, 2013.

V. Hemmilä, S. Adamopoulos, O. Karlsson, and A. Kumar, Development of sustainable bio-adhesives for engineered wood panels-A Review, vol.7, pp.38604-38630, 2017.

N. S. Hettiarachchy, U. Kalapathy, and D. J. Myers, Alkali-modified soy protein with improved adhesive and hydrophobic properties, J. Am. Oil Chem. Soc, vol.72, issue.12, pp.1461-1464, 1995.

C. Kamoun and A. Pizzi, Particleboard IB forecast by TMA bending in MUF adhesives curing, 2000.

, Eur.J.Wood Prods, vol.58, issue.4, pp.288-289

M. Lecourt, A. Pizzi, and P. Humphrey, Comparison of TMA and ABES as forecasting systems of wood bonding effectiveness, Eur.J.Wood Prods, issue.1, pp.75-76, 2003.

H. Lei, G. Du, Z. Wu, X. Xi, and Z. Dong, Cross-linked soy-based wood adhesives for plywood, Int. J. Adhesion Adhesives, vol.50, pp.199-203, 2014.

H. Lei, A. Pizzi, P. Navarrete, S. Rigolet, A. Redl et al., Gluten protein adhesives for wood panels, J. Adhes. Sci. Technol, vol.24, issue.8-10, pp.1583-1596, 2010.

H. Lei and C. E. Frazier, Curing behavior of melamine-urea-formaldehyde (MUF) resin adhesive, Int J Adhes Adhes, vol.62, pp.40-44, 2015.

K. Li, S. Peshkova, and X. Geng, Investigation of soy protein-Kymene® adhesive systems for wood composites, J. Am. Oil Chem. Soc, vol.81, issue.5, pp.487-491, 2004.

Q. Lin, N. Chen, L. Bian, and M. Fan, Development and mechanism characterization of high performance soy-based bio-adhesives, Int. J. Adhesion Adhesives, vol.34, pp.11-16, 2012.

W. Liu, A. K. Mohanty, P. Askeland, L. T. Drzal, and M. Misra, Modification of soy protein plastic with functional monomer with reactive extrusion, J. Polym. Environ, vol.16, issue.3, pp.177-182, 2008.

Y. Liu and K. Li, Chemical modification of soy protein for wood adhesives, Macromol. Rapid Comm, vol.23, issue.13, pp.739-742, 2002.

A. Pizzi, Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues, J. Adhes. Sci. Technol, vol.20, issue.8, pp.829-846, 2006.

A. Pizzi, Wood products and green chemistry, Ann. Forest Sci, vol.73, issue.1, pp.185-203, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01284230

A. Pizzi, R. Garcia, and X. Deglise, Thermomechanical analysis of entanglement networks: Correlation of some calculated and experimental parameters, J. appl. Polym. Sci, vol.67, issue.9, pp.1673-1678, 1998.

M. C. Salon, M. Abdelmouleh, S. Boufi, M. N. Belgacem, and A. Gandini, Silane adsorption onto cellulose fibers: Hydrolysis and condensation reactions, J. colloid interf. Sci, vol.289, issue.1, pp.249-261, 2005.

V. Schmidt, C. Giacomelli, and V. Soldi, Thermal stability of films formed by soy protein isolate-sodium dodecyl sulfate, Polym. Degrad. Stabil, vol.87, issue.1, pp.25-31, 2005.

C. Simon, B. George, and A. Pizzi, Copolymerization in UF/pMDI adhesives networks, J appl. Polym sci, vol.86, issue.14, pp.3681-3688, 2002.

X. Sun and K. Bian, Shear strength and water resistance of modified soy protein adhesives, J. Am. Oil Chem. Soc, vol.76, issue.8, pp.977-980, 1999.

K. Umemura, O. Sugihara, and S. Kawai, Investigation of a new natural adhesive composed of citric acid and sucrose for particleboard, J. Wood Sci, vol.59, issue.3, pp.203-208, 2013.

K. Umemura, T. Ueda, and S. Kawai, Characterization of wood-based molding bonded with citric acid, J. Wood Sci, vol.58, issue.1, pp.38-45, 2012.

K. Umemura, T. Ueda, S. S. Munawar, and S. Kawai, Application of citric acid as natural adhesive for wood, J. Appl. Polym. Sci, vol.123, issue.4, pp.1991-1996, 2012.

D. Vnu?ec, A. Kutnar, and A. Gor?ek, Soy-based adhesives for wood-bonding-a review, J. adhes. Sci. Technolo, vol.31, issue.8, pp.910-931, 2017.

J. M. Wescott, A. Traska, C. R. Frihart, and L. Lorenz, Durable soy-based adhesive dispersions, 2005.

, ISBN: 1892529459: pages, pp.263-269, 2005.

X. Xi, A. Pizzi, and L. Delmotte, Isocyanate-Free Polyurethane Coatings and Adhesives from Mono-and Di-Saccharides, Polymers, vol.10, issue.4, p.402, 2018.

X. Xi, Z. Wu, A. Pizzi, C. Gerardin, H. Lei et al., Non-isocyanate polyurethane adhesive from sucrose used for particleboard, Wood Sci. Technol, pp.1-13, 2019.

Y. Xie, C. A. Hill, Z. Xiao, H. Militz, and C. Mai, Silane coupling agents used for natural fiber/polymer composites: A review, Compos Part A: Appl.S, vol.41, issue.7, pp.806-819, 2010.

Z. Zhong, X. S. Sun, D. Wang, and J. A. Ratto, Wet strength and water resistance of modified soy protein adhesives and effects of drying treatment, J.Polym. Environ, vol.11, issue.4, pp.137-144, 2003.

S. Zhao, Z. Wang, H. Kang, J. Li, S. Zhang et al., Fully bio-based soybean adhesive in situ cross-linked by interactive network skeleton from plant oil-anchored fiber, Ind. Crop. Prod, vol.122, pp.366-374, 2018.

S. Zhao, Z. Wang, H. Kang, W. Zhang, J. Li et al., Construction of bioinspired organic-inorganic hybrid composite by cellulose-induced interfacial gelation assisted with Pickering emulsion template, Chem Engine J, vol.359, pp.275-284, 2019.

H. Kang, Z. Wang, Y. Wang, S. Zhao, S. Zhang et al., Development of mainly plant protein-derived plywood bioadhesives via soy protein isolate fiber self-reinforced soybean meal composites, Ind. Crop. Prod, vol.133, pp.10-17, 2019.