J. J. Jonas, S. J. Mu, T. A. Samman, G. Gottstein, L. Jiang et al., The role strain accommodation during the variant selection of primary twins in magnesium, Acta Materialia, vol.59, pp.2046-2056, 2011.

S. J. Mu, J. J. Jonas, and G. Gottstein, Variant selection of primary, secondary and tertiary twins in a deformed Mg alloy, Acta Materialia, vol.60, pp.2043-2053, 2012.

A. Devaraj, V. V. Joshi, A. Srivastava, S. Manandhar, V. Moxson et al., A low-cost hierarchical nanostructured beta-titanium alloy with high strength, Nature Communication, vol.7, p.11176, 2016.

G. Ering, J. C. Williams, and . Titanium, , 2007.

R. R. Boyer, Attributes, characteristics, and applications of titanium and its alloys, JOM, vol.62, pp.21-24, 2010.

R. Shi, Variant selection during alpha precipitation in titanium alloys: A simulation study, 2014.

Y. F. Zheng, R. E. Williams, D. Wang, R. Shi, S. Nag et al., Role of ? phase in the formation of extremely refined intragranular ? precipitates in metastable ?-titanium alloys, Acta Materialia, vol.103, pp.850-858, 2016.

E. W. Collings, Materials Properties Handbook. Titanium alloys, Materials Park, pp.1-35, 1994.

G. Lutjering, J. C. Williams, and . Titanium, , pp.1-15, 2003.

P. D. Frost, W. M. Parris, L. L. Hirsch, J. R. Doig, and C. M. Schwartz, Isothermal transformation of titanium-chromium alloys, Trans. ASM, vol.46, pp.231-256, 1954.

B. S. Hickman, The Formation of Omega Phase in Titanium and Zirconium Alloys: A, Review. Journal of Materials Science, vol.4, pp.554-563, 1969.

F. Prima, P. Vermaut, G. Texier, D. Ansel, and T. Gloriant, Evidence of ?-nanophase heterogeneous nucleation from ? particles in a ?-metastable Ti-based alloy by high-resolution electron microscopy, Scripta Materialia, vol.54, pp.645-648, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00496124

Y. Ohmori, T. Ogo, K. Nakai, and S. Kobayashi, Effects of ?-phase precipitation on ?????transformations in a metastable ? titanium alloy, Materials Science and Engineering: A, vol.312, pp.182-188, 2001.

P. G. Allen, P. J. Bania, A. J. Hutt, and Y. Combres, Beta titanium alloy. Titanium 95, Science and Technology. London: The Institute of Materials, pp.1680-1687, 1996.

S. Nyakana, J. C. Fanning, and R. R. Boyer, Quick reference guide for ? titanium alloys in the 00s, Journal of Materials Engineering and Performance, vol.14, issue.6, pp.799-811, 2005.

B. Jiang, Effect of Severe Plastic Deformation on Microstructure in Metastable ?-Ti Alloys, 2015.

, An Update on Properties and Applications for Ti-5Al-5Mo-5V-3Cr. Presented at the International Titanium Association, 2005.

G. Tomchik, Overview of Titanium Applications on Advanced Commercial Transports

, AeroMat Conference, 2006.

R. Panza-giosa, The Effect of Heat Treatment on the Microstructure Evolution and Mechanical Properties of Ti-5Al-5V-5Mo-3Cr, and Its Potential Application in Landing Gears, 2009.

S. Veeck, D. Lee, R. Boyer, and R. Briggs, The castability of Ti-5553 alloy: Its microstructure and properties, Journal of Advanced Materials, vol.37, pp.40-45, 2005.

B. Appolaire, L. Héricher, and E. Aeby-gautier, Modelling of phase transformation kinetics in Ti alloys-Isothermal treatments, Acta Materialia, vol.53, pp.3001-3011, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00163441

Z. Sun, S. Guo, and H. Yang, Nucleation and growth mechanism of ?-lamellae of Ti alloy TA15 cooling from an ?+? phase field, Acta Materialia, vol.61, pp.2057-2064, 2013.

D. I. Potter, The structure, morphology and orientation relationship of V3N in ?-vanadium, Journal of the Less Common Metals, vol.31, pp.299-309, 1973.

J. K. Fan, J. S. Li, H. C. Kou, K. Hua, B. Tang et al., Influence of solution treatment on microstructure and mechanical properties of a near ? titanium alloy Ti-7333, Materials & Design, vol.83, pp.499-507, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01515419

J. K. Fan, J. S. Li, H. C. Kou, K. Hua, and B. Tang, The Interrelationship of Fracture Toughness and Microstructure in a New Near ? Titanium Alloy Ti-7Mo-3Nb-3Cr-3Al, Materials Characterization, vol.96, pp.93-99, 2014.

J. K. Fan, J. S. Li, H. C. Kou, K. Hua, B. Tang et al., Microstructure and mechanical property correlation and property optimization of a near ? titanium alloy Ti-7333, Journal of Alloys and Compounds, vol.682, pp.517-524, 2016.

W. G. Burgers, On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium, Physica, vol.1, pp.561-586, 1934.

J. W. Cahn, G. M. Kalonji-;-pittsburghl, P. A. Aaronson, and H. I. , Symmetry in solid-solid transformation morphologies, Proceedings of an international conference on solid-solid phase transformations, p.3, 1982.

S. M. Van-bohemen, J. Sietsma, and S. Van-der-zwaag, Experimental observations elucidating the mechanisms of structural bcc-hcp transformations in ??Ti alloys, Physics Review. B, vol.74, p.134114, 2006.

T. Furuhara, H. Nakamori, and T. Maki, Chrystallography of a Phase Precipitated on Dislocations and Deformation Twin Boundaries in a ? Titanium Alloy. Material Transactions, JIM, vol.33, pp.585-595, 1992.

T. Furuhara, S. Takagi, H. Watanabe, and T. Maki, Crystallography of grain boundary ? precipitates in a ? titanium alloy. Metallurgical and Materials Transactions A, vol.27, pp.1635-1646, 1996.

D. Banerjee and J. C. Williams, Perspectives on titanium science and technology, Acta Materialia, vol.61, p.844, 2013.

S. Nag, R. Banerjee, R. Srinivasan, J. Y. Hwang, M. Harper et al.,

, Acta Materialia, vol.57, pp.2136-2147, 2009.

R. Shi and Y. Wang, Variant selection during ? precipitation in Ti-6Al-4V under the influence of local stress -A simulation study, Acta Materialia, vol.61, pp.6006-6024, 2013.

R. Shi, V. Dixit, H. L. Fraser, and Y. Wang, Variant selection of grain boundary ? by special prior ? grain boundaries in titanium alloys, Acta Materialia, vol.75, pp.156-166, 2014.

R. Shi, N. Ma, and Y. Wang, Predicting equilibrium shape of precipitates as function of coherency state, Acta Materialia, vol.60, pp.4172-4184, 2012.

M. Naoki, N. Takahiro, I. Teruhiko, and A. Kei, Reasons for Formation of Triangular ? Precipitates in Ti-15V-3Cr-3Sn-3Al Titanium Alloy, Materials Transactions, vol.47, pp.341-347, 2006.

C. M. Liu, X. J. Tian, H. B. Tang, and H. M. Wang, Microstructural characterization of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near ? titanium alloy, Journal of Alloys and Compounds, vol.572, pp.17-24, 2013.

N. Jones, R. Dashwood, D. Dye, and M. Jackson, Thermomechanical processing of Ti-5Al-5Mo-5V-3Cr, Materials Science and Engineering: A, vol.490, pp.369-377, 2008.

V. , Structural conversions in VT22 titanium alloy during aging, Materials Science and Engineering: A, vol.34, pp.534-539, 1992.

M. Salib, J. Teixeira, L. Germain, E. Lamielle, N. Gey et al., Influence of transformation temperature on microtexture formation associated with ? precipitation at ? grain boundaries in a ? metastable titanium alloy, Acta Materialia, vol.61, pp.3758-3768, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01293814

G. Gottstein and L. Shvindlerman, Grain Boundary Migration in Metals: thermodynamics, kinetics, applications, vol.43, 2009.

T. Furuhara, S. Takagi, H. Watanabe, and T. Maki, Crystallography of grain boundary ? precipitates in a ? titanium alloy. Metallurgical and Materials Transactions A, vol.27, pp.1635-1646, 1996.

M. Salib, J. Teixeira, L. Germain, E. Lamielle, N. Gey et al., Influence of transformation temperature on microtexture formation associated with ? precipitation at ? grain boundaries in a ? metastable titanium alloy, Acta Materialia, vol.61, pp.3758-3768, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01293814

C. Cayron, Importance of the transformation in the variant selection mechanisms of thermomechanically processed titanium alloys, Scripta Materialia, vol.59, pp.570-573, 2008.

D. Bhattacharyya, G. B. Viswanathan, and H. L. Fraser, Crystallographic and morphological relationships between ? phase and the Widmanstätten and allotriomorphic ? phase at special ? grain boundaries in an ?/? titanium alloy, Acta Materialia, vol.55, pp.6765-6778, 2007.

E. Lee, R. Banerjee, S. Kar, D. Bhattacharyya, and H. L. Fraser, Selection of ? variants during microstructural evolution in ?/? titanium alloy. Philosophical Magazine, vol.87, pp.3615-3627, 2007.

R. Shi, V. Dixit, H. L. Fraser, and Y. Wang, Variant selection of grain boundary ? by special prior ? grain boundaries in titanium alloys, Acta Materialia, vol.75, pp.156-166, 2014.

R. Shi, V. Dixit, G. B. Viswanathan, H. L. Fraser, and Y. Wang, Experimental assessment of variant selection rules for grain boundary ? in titanium alloys, Acta Materialia, vol.102, pp.197-211, 2016.

N. Vanderesse, E. Maire, M. Darrieulat, F. Montheillet, M. Moreaudc et al.,

, Three-dimensional microtomographic study of Widmanstätten microstructures in an alpha/beta titanium alloy, Scripta Materialia, vol.58, pp.512-515, 2008.

D. Qiu, R. Shi, D. Zhang, W. Lua, and Y. Wang, Variant selection by dislocations during a precipitation in ?/? titanium alloys, Acta Materialia, vol.88, pp.218-231, 2015.

C. P. Luo and G. C. Weatherly, The invariant line and precipitation in a Ni-45 wt% Cr alloy

A. Metallurgica, , vol.35, pp.1963-1972, 1987.

T. Furuhara and T. Maki, Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation, Materials Science and Engineering: A, vol.312, pp.145-154, 2001.

S. C. Wang, M. Aindow, and M. J. Starink, Effect of self-accommodation on ?/? boundary populations in pure titanium, Acta Materialia, vol.51, pp.2485-2503, 2013.

K. Otsuka and X. Ren, Physical metallurgy of Ti-Ni-based shape memory alloys. Progress in Materials Science, vol.50, pp.511-678, 2005.

D. He, J. C. Zhu, S. Zaefferer, D. Raabe, Y. Liu et al., Influences of deformation strain, strain rate and cooling rate on the Burgers orientation relationship and variants morphology during phase transformation in a near titanium alloy, Materials Science and Engineering: A, vol.549, pp.20-29, 2012.

T. Karthikeyan, A. Dasgupta, R. Khatirkar, S. Saroja, I. Samajdar et al., Effect of cooling rate on transformation texture and variant selection during ?? ? transformation in Ti-5Ta-1.8Nb alloy, Materials Science and Engineering: A, vol.528, 2010.

G. A. Sargent, K. T. Kinsel, A. L. Pilchak, A. A. Salem, and S. L. Semiatin, Variant selection during cooling after beta annealing of Ti-6Al-4V ingot material. Metallurgical and Materials Transactions A, vol.43, pp.3570-3585, 2012.

G. C. Obasi, S. Birosca, D. G. Leo-prakash, J. Quinta-da-fonseca, and M. Preuss, The influence of rolling temperature on texture evolution and variant selection during phase transformation in Ti-6Al-4V, Acta Materialia, vol.60, pp.6013-6024, 2012.

Z. S. Zhu, J. L. Gu, and N. P. Chen, Variant selection in phase transformation of cold rolled titanium sheet, Scripta Materialia, vol.34, pp.1281-1286, 1996.

Y. Xu, J. Zhang, Y. Bai, and M. A. Meyers, Shear localization in dynamic deformation: microstructural evolution. Metallurgical and Materials Transactions A, vol.39, pp.811-843, 2008.

T. R. Bieler and S. L. Semiatin, The origins of heterogeneous deformation during primary hot working of Ti-6Al-4V, International Journal of Plasticity, vol.18, issue.9, pp.1165-1189, 2002.

H. Tobe, H. Y. Kim, T. Inamura, H. Hosoda, and S. Miyazaki, Origin of {332} twinning in metastable ?-Ti alloys, Acta Materialia, vol.64, pp.345-355, 2014.

P. Eyckens, H. Mulder, J. Gawad, H. Vegter, D. Roose et al.,

. Houtte, The prediction of differential hardening behaviour of steels by multi-scale crystal plasticity modelling, International Journal of Plasticity, vol.73, pp.119-141, 2015.

N. Fujita, N. Ishikawa, F. Roters, C. C. Tasan, and D. Raabe, Experimental-numerical study on strain and stress partitioning in bainitic steels with martensite-austenite constituents, International Journal of Plasticity, vol.104, pp.39-53, 2018.

A. S. Khan and J. Liu, A deformation mechanism based crystal plasticity model of ultrafine-grained/nanocrystalline FCC polycrystals, International Journal of Plasticity, vol.86, pp.56-69, 2016.

L. A. Kestens and H. Pirgazi, Texture formation in metal alloys with cubic crystal structures, Materials Science Technology, vol.32, pp.1303-1315, 2016.

M. S. Pham, M. Iadicola, A. Creuziger, L. Hu, and A. D. Rollett, Thermally-activated constitutive model including dislocation interactions, aging and recovery for strain path dependence of solid solution strengthened alloys: Application to AA5754-O, International Journal of Plasticity, vol.75, pp.226-243, 2015.

C. C. Tasan, J. P. Hoefnagels, M. Diehl, D. Yan, F. Roters et al., Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations, International Journal of Plasticity, vol.63, pp.198-210, 2014.

A. S. Khan, Y. S. Suh, and R. Kazmi, Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys, International Journal of Plasticity, vol.20, pp.2233-2248, 2004.

A. S. Khan, R. Kazmi, B. Farrokh, and M. Zupan, Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: Experiments and modeling over a wide range of strain-rates and temperatures, International Journal of Plasticity, vol.23, pp.1105-1125, 2007.

J. Liu, A. S. Khan, L. Takacs, and C. S. Meredith, Mechanical behavior of ultrafine-grained/nanocrystalline titanium synthesized by mechanical milling plus consolidation: Experiments, modeling and simulation, International Journal of Plasticity, vol.64, pp.151-163, 2015.

S. Mandal, B. T. Gockel, S. Balachandran, D. Banerjee, and A. D. Rollett, Simulation of plastic deformation in Ti-5553 alloy using a self-consistent viscoplastic model, International Journal of Plasticity, vol.94, pp.57-73, 2017.

C. S. Meredith and A. S. Khan, Texture evolution and anisotropy in the thermo-mechanical response of UFG Ti processed via equal channel angular pressing, International Journal of Plasticity, vol.30, pp.202-217, 2012.

J. J. Sidor, K. Decroos, R. H. Petrov, and L. A. Kestens, Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: experimental study and modeling, International Journal of Plasticity, vol.66, pp.119-137, 2015.

Z. C. Sun, H. L. Wu, J. Cao, and Z. K. Yin, Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method, International Journal of Plasticity, vol.106, pp.73-87, 2018.

J. Wang, Z. Moumni, and W. Zhang, A thermomechanically coupled finite-strain constitutive model for cyclic pseudoelasticity of polycrystalline shape memory alloys, International Journal of Plasticity, vol.97, pp.194-221, 2017.

Y. Xiao, P. Zeng, and L. Lei, Micromechanical modeling on thermomechanical coupling of cyclically deformed superelastic NiTi shape memory alloy, International Journal of Plasticity, vol.107, pp.164-188, 2018.

T. Furuhara, B. Poorganji, H. Abe, and T. Maki, Dynamic recovery and recrystallization in titanium alloys by hot deformation, JOM, vol.59, pp.64-67, 2007.

A. Rollett, G. S. Rohrer, and J. Humphreys, Recrystallization and related annealing phenomena, 2017.

A. K. Kanjarla, P. V. Houtte, and L. Delannay, Assessment of plastic heterogeneity in grain interaction models using crystal plasticity finite element method, International Journal of Plasticity, vol.26, pp.1220-1233, 2010.

H. Matsumoto, M. Kitamura, Y. Li, Y. Koizumi, and A. Chiba, Hot forging characteristic of Ti-5Al-5V-5Mo-3Cr alloy with single metastable ? microstructure, Materials Science and Engineering: A, vol.611, pp.337-344, 2014.

F. Warchomicka, M. Stockinger, and H. P. Degischer, Quantitative analysis of the microstructure of near ? titanium alloy during compression tests, Journal of Materials Processing Technology, vol.177, pp.473-477, 2006.

C. M. Sellars and W. J. Tegart, On the mechanism of hot deformation, Acta Metallurgica, vol.14, pp.1136-1138, 1966.

F. J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, pp.11-35, 2004.

D. G. Cram, H. S. Zurob, Y. J. Brechet, and C. R. Hutchinson, Modelling discontinuous dynamic recrystallization using a physically based model for nucleation, Acta Materialia, vol.57, pp.5218-5228, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00805034

S. Gourdet and F. Montheillet, A model of continuous dynamic recrystallization, Acta Materialia, vol.51, pp.2685-2699, 2003.

S. Gourdet and F. Montheillet, An experimental study of the recrystallization mechanism during hot deformation of aluminium, Materials Science and Engineering: A, vol.283, pp.274-288, 2000.

J. K. Fan, H. C. Kou, M. J. Lai, B. Tang, H. Chang et al., Hot Deformation Mechanism and Microstructure Evolution of a New Near ? Titanium Alloy, Materials Science and Engineering: A, vol.584, pp.121-132, 2013.

R. , P. Kolli, and A. Bevaraj, A Review of Metastable Beta Titanium Alloys, Metals, vol.8, p.506, 2018.

H. J. Philippart and . Rack, High temperature dynamic yielding in metastable Ti-6, Materials Science and Engineering: A, vol.243, pp.196-200, 1998.

R. Srinivasan, Yield points during the high temperature deformation of

, Ti-15V-3Al-3Cr-3Sn alloy, Scripta Metallurgica et Materialia, vol.27, pp.925-930, 1992.

L. Jing, R. Fu, Y. Wang, L. Qiu, and B. Yan, Discontinuous yielding behavior and microstructure evolution during hot deformation of TC11 alloy, Materials Science and Engineering: A, vol.704, pp.434-439, 2017.

J. J. Jonas, C. Aranas, A. Fall, and M. Jahazi, Transformation softening in three titanium alloys, Materials & Design, vol.113, pp.305-310, 2017.

J. Koike, Y. Shimoyama, I. Ohnuma, T. Okamura, R. Kainuma et al., Stress-induced phase transformation during superplastic deformation in two-phase Ti-Al-Fe alloy, Acta Materialia, vol.48, pp.2059-2069, 2000.

M. Jackson, N. G. Jones, D. Dye, and R. J. Dashwood, Effect of initial microstructure on plastic flow behaviour during isothermal forging of Ti-10V-2Fe-3Al, Materials Science and Engineering: A, vol.501, pp.248-254, 2009.

A. Carman, L. C. Zhang, O. M. Ivasishin, D. G. Savvakin, M. V. Matviychuk et al.,

. Pereloma, Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near-? titanium alloy, Materials Science and Engineering A, vol.528, pp.1686-1693, 2011.

M. Jackson, R. J. Dashwood, and L. Christodoulou, The microstructural evolution of near beta alloy Ti-10V-2Fe-3Al during subtransus forging. Metallurgical and Materials Transactions A, vol.36, pp.1317-1327, 2005.

N. G. Jones, R. J. Dashwood, D. Dye, and M. Jackson, Thermomechanical processing of Ti-5Al-5Mo-5V-3Cr, Materials Science and Engineering: A, vol.490, pp.369-377, 2008.

N. G. Jones, R. J. Dashwood, D. Dye, and M. Jackson, The flow behavior and microstructural evolution of Ti-5Al-5Mo-5V-3Cr during subtransus isothermal forging. Metallurgical and Materials Transactions A, vol.40, pp.1944-1954, 2009.

W. G. Johnston and J. J. Gilman, Dislocation velocities, dislocation densities, and plastic flow in lithium fluoride crystals, Journal of Applied Physics, vol.30, pp.129-144, 1959.

M. S. Pham, M. Iadicola, A. Creuziger, L. Hu, and A. D. Rollett, Thermally-activated constitutive model including dislocation interactions, aging and recovery for strain path dependence of solid solution strengthened alloys: Application to AA5754-O, International Journal of Plasticity, vol.75, pp.226-243, 2015.

A. D. Rollett, G. S. Rohrer, and R. M. Suter, Understanding materials microstructure and behavior at the mesoscale, MRS Bulletin, vol.40, pp.951-960, 2015.

T. Ozturk and A. D. Rollett, Effect of microstructure on the elasto-viscoplastic deformation of dual phase titanium structures, Computational Mechanics, vol.61, pp.55-70, 2018.

C. Poletti, L. Germain, F. Warchomicka, M. Dikovits, and S. Mitsche, Unified description of the softening behavior of beta-metastable and alpha+ beta titanium alloys during hot deformation, Materials Science and Engineering: A, vol.651, pp.280-290, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01515197

I. Weiss and S. L. Semiatin, Thermomechanical processing of beta titanium alloys-an overview, Materials Science and Engineering: A, vol.243, pp.46-65, 1998.

C. Randau, U. Garbe, and H. Brokmeier, StressTextureCalculator: a software tool to extract texture, strain and microstructure information from area-detector measurements, Journal of Applied Crystallography, vol.44, pp.641-646, 2011.

B. Beausir and J. J. Fundenberger, Analysis Tools for Electron and X-ray diffraction, ATEX software, 2017.

A. Morawiec, J. J. Fundenberger, E. Bouzy, and J. S. Lecomte, EP -a program for determination of crystallite orientations from TEM Kikuchi and CBED diffraction patterns, Journal of Applied Crystallography, vol.35, pp.287-287, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00111949

H. J. Bunge, C. Esling, and J. Muller, The role of the inversion centre in texture analysis, Journal of Applied Crystallography, vol.13, pp.544-554, 1980.

H. J. Bunge, C. Esling, and J. Muller, The influence of crystal and sample symmetries on the orientation distribution function of the crystallites in polycrystalline materials, Acta Crystallographica Section A, vol.37, pp.889-899, 1981.

A. G. Khachaturyan, Theory of structural transformations in solids, 1983.

, Pearson's Handbook Desk Edition, 1997.

S. K. Kara, A. Ghosha, N. Fulzelea, and A. Bhattacharjee, Quantitative microstructural characterization of a near beta Ti alloy Ti-5553 under different processing conditions, Materials Characterization, vol.81, pp.37-48, 2013.

A. Dehghan-manshadi and R. J. Dippenaar, Development of ?-phase morphologies during low temperature isothermal heat treatment of a Ti-5Al-5Mo-5V-3Cr alloy, Materials Science and Engineering: A, vol.528, pp.1833-1839, 2011.

N. Gey, M. Humbert, M. J. Philippe, and Y. Combres, Investigation of the ?-and ?-texture evolution of hot rolled Ti-64 products, Materials Science and Engineering: A, vol.219, pp.80-88, 1996.

T. Inamura, M. Ii, M. Tahara, and H. Hosoda, Formation process of the incompatible martensite microstructure in a beta-titanium shape memory alloy, Acta Materialia, vol.124, pp.351-359, 2017.

S. Balachandran, A. Kashiwar, A. Choudhury, D. Banerjee, R. Shi et al., On variant distribution and coarsening behavior of the ? phase in a metastable ? titanium alloy, Acta Materialia, vol.106, pp.374-387, 2016.

Y. D. Zhang, S. Y. Wang, C. Esling, J. Lecomte, C. Schuman et al., A method to identify dislocations in a known crystal structure by transmission electron microscopy, Journal of Applied Crystallography, vol.44, pp.1164-1168, 2011.

Y. M. Jin and G. J. Weng, A direct method for the crystallography of martensitic transformation and its application to TiNi and AuCd, Acta Materialia, vol.50, pp.2967-2987, 2002.

K. E. Amouzou, T. Richeton, A. Roth, M. A. Lebyodkin, and T. A. Lebedkina,

, Micromechanical modeling of hardening mechanisms in commercially pure ?-titanium in tensile condition, International Journal of Plasticity, vol.80, pp.222-240, 2016.

B. Barkia, V. Doquet, J. P. Couzinié, I. Guillot, and E. Héripré, In situ monitoring of the deformation mechanisms in titanium with different oxygen contents, Materials Science and Engineering: A, vol.636, pp.91-102, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01227185

M. P. Echlin, J. C. Stinville, V. M. Miller, W. C. Lenthe, and T. M. Pollock, Incipient slip and long range plastic strain localization in microtextured Ti-6Al-4V titanium, Acta Materialia, vol.114, pp.164-175, 2016.

A. Fitzner, D. G. Prakash, J. Q. Fonseca, M. Thomas, S. Zhang et al., The effect of aluminium on twinning in binary alpha-titanium, Acta Materialia, vol.103, pp.341-351, 2016.

M. J. Lai, T. Li, and D. , Raabe. ? phase acts as a switch between dislocation channeling and joint twinning-and transformation-induced plasticity in a metastable ? titanium alloy

, Acta Materialia, vol.151, pp.67-77, 2018.

J. Zhang, C. C. Tasan, M. J. Lai, A. C. Dippel, and D. Raabe, Complexion-mediated martensitic phase transformation in Titanium, Nature Communication, vol.8, p.14210, 2017.

Y. F. Zheng, R. E. Williams, G. B. Viswanathan, W. A. Clark, and H. L. Fraser, Determination of the structure of ?-? interfaces in metastable ?-Ti alloys, Acta Materialia, vol.150, pp.25-39, 2018.

T. Li, D. Kent, G. Sha, L. T. Stephenson, A. V. Ceguerra et al.,

. Cairney, New insights into the phase transformation to isothermal ? and ?-assisted ? in near ?-Ti alloys, Acta Materialia, vol.106, pp.353-366, 2016.

J. R. Patel and M. Cohen, Criterion for the action of applied stress in the martensitic transformation, Acta Metallurgica, vol.1, pp.531-538, 1953.

D. De-knijf, T. Nguyen-minh, R. Petrov, L. A. Kestens, and J. J. Jonas, Orientation dependence of the martensite transformation in a quenched and partitioned steel subjected to uniaxial tension, Journal of Applied Crystallography, vol.47, pp.1261-1266, 2014.

S. Joseph, I. Bantounas, T. C. Lindley, and D. Dye, Slip transfer and deformation structures resulting from the low cycle fatigue of near-alpha titanium alloy Ti-6242Si, International Journal of Plasticity, vol.100, pp.90-103, 2018.

Z. Zheng, S. Waheed, D. S. Balint, and F. P. Dunne, Slip transfer across phase boundaries in dual phase titanium alloys and the effect on strain rate sensitivity, International Journal of Plasticity, vol.104, pp.23-38, 2018.

A. Rollett, G. S. Rohrer, and J. Humphreys, Recrystallization and related annealing phenomena, 2017.

A. Morawiec, Orientations and Rotations. Berlin, 2003.

D. Gloaguen, G. Oum, V. Legrand, J. Fajoui, and S. Branchu, Experimental and theoretical studies of intergranular strain in an alpha titanium alloy during plastic deformation, Acta Materialia, vol.61, pp.5779-5790, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01006837

R. Groger and V. Vitek, Stress dependence of the Peierls barrier of 1/2< 1 1 1> screw dislocations in bcc metals, Acta Materialia, vol.61, pp.6362-6371, 2013.

N. Stefansson, S. L. Semiatin, and D. Eylon, The kinetics of static globularization of Ti-6Al-4V. Metallurgical and Materials Transactions A, vol.33, pp.3527-3534, 2002.

G. Sharma, R. V. Ramanujan, and G. P. Tiwari, Instability mechanisms in lamellar microstructures, Acta Materialia, vol.48, pp.875-889, 2000.

S. L. Semiatin, N. Stefansson, and R. D. Doherty, Prediction of the kinetics of static globularization of Ti-6Al-4V, Metallurgical and Materials Transactions A, vol.36, pp.1372-1376, 2005.

S. L. Semiatin and D. U. Furrer, Modeling of microstructure evolution during the thermomechanical processing of titanium alloys, Fundamentals of Modeling for Metals Processing, vol.22, 2009.

R. M. Miller, T. R. Bieler, and S. L. Semiatin, Flow softening during hot working of Ti-6Al-4V with a lamellar colony microstructure, Scripta Materialia, vol.40, pp.1387-1393, 1999.

S. Suri, G. B. Viswanathan, T. Neeraj, D. H. Hou, and M. J. Mills, Room temperature deformation and mechanisms of slip transmission in oriented single-colony crystals of an ? / ? titanium alloy, Acta Materialia, vol.47, pp.1019-1034, 1999.

S. Mironov, M. Murzinova, S. Zherebtsov, G. A. Salishchev, and S. L. Semiatin, Microstructure evolution during warm working of Ti-6Al-4V with a colony-? microstructure, Acta Materialia, vol.57, pp.2470-2481, 2009.

S. L. Semiatin, F. Montheillet, G. Shen, and J. J. Jonas, Self-consistent modeling of the flow behavior of wrought alpha/beta titanium alloys under isothermal and nonisothermal hot-working conditions, Metallurgical and Materials Transactions A, vol.33, pp.2719-2727, 2002.

G. A. Sargent, A. P. Zane, P. N. Fagin, A. K. Ghosh, and S. L. Semiatin, Low-temperature coarsening and plastic flow behavior of an alpha/beta titanium billet material with an ultrafine microstructure, Metallurgical and Materials Transactions A, vol.39, 2008.

K. Hua, Y. Zhang, W. Gan, H. Kou, B. Beausir et al., Hot deformation behavior originated from dislocation activity and ? to ? phase transformation in a metastable ? titanium alloy, International journal of Plasticity, 2019.

K. Hua, Y. Zhang, W. Gan, H. Kou, and J. Li, Claude Esling, Correlation between imposed deformation and transformation lattice strain on ? variant selection in a metastable ?-Ti alloy under isothermal compression, Acta Materialia, vol.161, pp.150-160, 2018.

K. Hua, Y. Zhang, H. Kou, J. Li, and W. Gan,

C. Fundenberger and . Esling, Composite structure of ? phase in metastable ? Ti alloys induced by lattice strain during ? to ? phase transformation, Acta Materialia, vol.132, pp.307-326, 2017.

K. Hua, J. Li, H. Kou, J. Fan, and M. Sun, Bin Tang, Phase precipitation behavior during isothermal deformation in ?-quenched near beta titanium alloy Ti-7333, Journal of Alloys & Compounds, vol.671, pp.381-388, 2016.

K. Hua, X. Xue, H. Kou, J. Fan, B. Tang et al., Characterization of hot deformation microstructure of a near beta titanium alloy Ti-5553, Journal of Alloys & Compounds, vol.615, pp.531-537, 2014.

, II: Contributions to International Conferences

K. Hua, Y. Zhang, H. Kou, J. Li, W. Gan et al., Formation of microtexture induced by ? to ? transformation in a metastable ? Ti alloy, 18th International Conference on Textures of Materials, 2017.

K. Hua, Y. Zhang, W. Gan, H. Kou, J. Li et al., Deformation-induced ? variant selection during ? to ? phase transformation in a metastable ?-Ti alloy, ESOMAT 2018: 11th European Symposium on Martensitic Transformations, 2018.

K. Hua, Y. Zhang, W. Gan, H. Kou, B. Beausir et al., Plastic deformation by dislocation slip and ? to ? transformation in a metastable ? titanium alloy under uniaxial isothermal compression, Plasticity 2019: International Conference on Plasticity, Damage & Fracture, 2019.