A. G. Nerlich, A. Zink, U. Szeimies, and H. G. Hagedorn, Ancient Egyptian prosthesis of the big toe, Lancet, vol.356, pp.2176-2179, 2000.

R. Cavézian, Évolution Historique Du Concept Implantaire: Passé, Présent Et Futur Des Moyens Prédictifs D'Imagerie, Actes. Société Fr. d'histoire l'art Dent, vol.12, pp.35-40, 1943.

S. Kurtz, K. Ong, E. Lau, F. Mowat, and M. Halpern, Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030, J. Bone Jt. Surg. -Ser. A, vol.89, issue.4, pp.780-785, 2007.

G. V. Research, Dental Implants Market Size, Share, Growth

J. Lévesque and D. Mantovani, Les biomatériaux métalliques : de l'industrie à la salle d'opération, Le Médecin du Québec, vol.38, pp.2-4, 2003.

S. G. Steinemann, Metal implants and surface reactions, Injury, vol.27, 1996.

D. F. Williams, Definitions in biomaterials: proceedings of a consensus conference of the European Society for Biomaterials, vol.4, 1986.

D. F. Williams, On the mechanisms of biocompatibility, Biomaterials, vol.29, issue.20, pp.2941-2953, 2008.

V. I. Sikavitsas, J. S. Temenoff, and A. G. Mikos, Biomaterials and bone mechanotransduction, Biomaterials, vol.22, issue.19, pp.2581-2593, 2001.

A. W. Orr, B. P. Helmke, B. R. Blackman, and M. A. Schwartz, Mechanisms of mechanotransduction, Dev. Cell, vol.10, issue.1, pp.11-20, 2006.

D. F. Williams, Biocompatibility pathways: Biomaterials-induced sterile inflammation, mechanotransduction, and principles of biocompatibility control, ACS Biomater. Sci. Eng, vol.3, issue.1, pp.2-35, 2017.

M. Geetha, A. K. Singh, R. Asokamani, and A. K. Gogia, Ti based biomaterials, the ultimate choice for orthopaedic implants -A review, Prog. Mater. Sci, vol.54, issue.3, pp.397-425, 2009.

P. Brånemark, Osseointegrated Implants in the Treatment of the Edentulous Jaw, Scand. J. Plast. Reconstr. Surg, vol.16, pp.1-132, 1977.

T. Albrektsson, P. Brånemark, H. Hansson, and J. Lindström, Osseointegrated titanium implants: Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man, Acta Orthop. Scand, vol.52, pp.155-170, 1981.

T. Albrektsson and D. Ph, Bone-metal interface in osseointegration

T. Albrektsson and C. Johansson, Osteoinduction, osteoconduction and osseointegration, Eur. Spine J, vol.10, pp.96-101, 2001.

D. M. Dohan-ehrenfest, P. G. Coelho, B. S. Kang, Y. T. Sul, and T. Albrektsson, Classification of osseointegrated implant surfaces: Materials, chemistry and topography, Trends Biotechnol, vol.28, issue.4, pp.198-206, 2010.

R. K. Alla, K. Ginjupalli, N. Upadhya, M. Shammas, R. K. Rav et al., Surface Roughness of Implants: A Review, Trends Biomater. Artif. Organs, vol.25, issue.3, pp.112-118, 2011.

S. Renvert, I. Polyzois, and N. Claffey, How do implant surface characteristics influence periimplant disease?, J. Clin. Periodontol, vol.38, issue.11, pp.214-222, 2011.

G. Ryan, A. Pandit, and D. P. Apatsidis, Fabrication methods of porous metals for use in orthopaedic applications, Biomaterials, vol.27, issue.13, pp.2651-2670, 2006.

N. Taniguchi, S. Fujibayashi, M. Takemoto, K. Sasaki, and B. Otsuki, Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing : An in vivo experiment, Mater. Sci. Eng. C, vol.59, pp.690-701, 2016.

M. , A. Gepreel, and M. Niinomi, Biocompatibility of Ti-alloys for long-term implantation, J. Mech. Behav. Biomed. Mater, vol.20, pp.407-415, 2013.

D. P. Perl, Relationship of aluminum to Alzheimer's disease, Environ. Health Perspect, vol.63, issue.7, pp.149-153, 1985.

H. Scholz, I. Hackbarth, W. Schmitz, and E. Wetzel, Effect of vanadate on mycardial force of contraction, Basic Res. Cardiol, vol.422, pp.418-422, 1980.

C. Muller, Titanium alloy mini-implants for orthodontic anchorage: Immediate loading and metal ion release?, Acta Biomater, vol.3, issue.3, pp.331-339, 2007.

T. Hanawa, Metal ion release from metal implants, Mater. Sci. Eng. C, vol.24, issue.6-8, pp.745-752, 2004.

D. Brune, Metal release from dental biomaterials, Biomaterials, vol.7, issue.3, pp.163-175, 1986.

J. J. Jacobs, Metal release in patients who have had a primary total hip arthroplasty. A prospective, controlled, longitudinal study, J. Bone Joint Surg. Am, vol.80, issue.10, pp.1447-58, 1998.

R. Rudolf, S. K. Fokter, A. Moli?nik, N. Gubeljak, P. Pelicon et al., Why do some titanium-alloy total hip arthroplasty modular necks fail?, J. Mech. Behav. Biomed. Mater, vol.69, pp.107-114, 2016.

A. G. Patwardhan, M. Sartori, and W. G. Paprosky, Acetabular micromotion as a measure of initial implant stability in primary hip arthroplasty: An in vitro comparison of different methods of intial acetabular component fixation, J. Arthroplasty, vol.7, issue.4, pp.537-547, 1992.

S. S. Gao, Y. R. Zhang, Z. L. Zhu, and H. Y. Yu, Micromotions and combined damages at the dental implant/bone interface, Int. J. Oral Sci, vol.4, issue.4, pp.182-188, 2013.

H. M. Frost, Wolff's law and bone's structural adaptations to mechanical usage: an overview for clinicians, The Angle Orthdontist, vol.64, issue.3, pp.175-178, 1994.

J. H. Chen, C. Liu, L. You, and C. A. Simmons, Boning up on Wolff's Law: Mechanical regulation of the cells that make and maintain bone, J. Biomech, vol.43, issue.1, pp.108-118, 2010.

H. M. Frost, A 2003 update of bone physiology and Wolff s law for clinicians, Angle Orthod, vol.74, issue.1, pp.3-15, 2004.

L. M. Mcnamara and P. J. Prendergast, Bone remodelling algorithms incorporating both strain and microdamage stimuli, J. Biomech, vol.40, issue.6, pp.1381-1391, 2007.

G. H. Van-lenthe, M. D. Waal, and R. Huiskes, Stress shielding after total knee replacement may cause bone resorption in the distal femur, Bone Jt. Surgery, vol.79, issue.1, pp.117-122, 1997.

R. Huiskes, H. Weinans, B. Van-rietbergen, and B. Van-rietbergen, The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials, Clin. Orthop. Relat. Res, issue.274, pp.124-134, 1992.

M. I. Ridzwan, S. Shuib, A. Y. Hassan, A. A. Shokri, and M. N. Mohammad-ibrahim, Problem of stress shielding and improvement to the hip implant designs: A review, J. Med. Sci, vol.7, issue.3, pp.460-467, 2007.

J. Nagels, M. Stokdijk, and P. M. Rozing, Stress shielding and bone resorption in shoulder arthroplasty, J. Shoulder Elb. Surg, vol.12, issue.1, pp.35-39, 2003.

M. C. Kennady, M. R. Tucker, G. E. Lester, and M. J. Buckley, Stress shielding effect of rigid internal fixation plates on mandibular bone grafts. A photon absorption densitometry and quantitative computerized tomographic evaluation, Int. J. Oral Maxillofac. Surg, vol.18, issue.5, pp.307-310, 1989.

R. M. Pilliar, H. U. Cameron, A. G. Binnington, J. Szivek, and I. Macnab, Bone ingrowth and stress shielding with a porous surface coated fracture fixation plate, J. Biomed. Mater. Res, vol.13, issue.5, pp.799-810, 1979.

A. Gefen, Computational simulations of stress shielding and bone resorption around existing and computer-designed orthopaedic screws, Med. Biol. Eng. Comput, vol.40, 2001.

C. Lim, Y. Chung, D. Kim, and S. Ahn, Total Hip Arthroplasty Using AML® Prosthesis: Minimum 20-Year Follow-Up of the Patients, Korean Orthop. Assoc, pp.439-444, 2012.

H. Weinans, D. R. Sumner, R. Igloria, and R. N. Natarajan, Sensitivity of periprosthetic stress-shielding to load and the bone density-modulus relationship in subject-specific finite element models, J. Biomech, vol.33, issue.7, pp.809-817, 2000.

S. Gross and E. W. Abel, A finite element analysis of hollow stemmed hip prostheses as a means of reducing stress shielding of the femur, J. Biomech, vol.34, issue.8, pp.995-1003, 2001.

R. Hambli, H. Katerchi, and C. L. Benhamou, Multiscale methodology for bone remodelling simulation using coupled finite element and neural network computation, Biomech. Model. Mechanobiol, vol.10, issue.1, pp.133-145, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01087589

I. Scala, C. Spingarn, Y. Rémond, A. Madeo, and D. George, Mechanically-driven bone remodeling simulation: Application to LIPUS treated rat calvarial defects, Math. Mech. Solids, vol.22, issue.10, pp.1976-1988, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02077445

T. D. Ngo, A. Kashani, G. Imbalzano, K. T. Nguyen, and D. Hui, Additive manufacturing (3D printing): A review of materials, methods, applications and challenges, Compos. Part B Eng, vol.143, pp.172-196, 2017.

B. S. Gibson and D. Rosen, Additive Manufacturing Technologies -Rapid Prototyping to Direct Digital Manufacturing, 2010.

M. K. Thompson, Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints, CIRP Ann. -Manuf. Technol, vol.65, issue.2, pp.737-760, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02380637

C. Barlier and A. Bernard, Fabrication additive : du prototypage rapide à l'impression 3D, Cetim, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02396264

J. Andre, A. L. Mehaute, and O. Witte, Dispositif pour réaliser un modèle de pièce industrielle, p.2567668, 1984.

C. W. Hull, Apparatus for production of three-dimensional objects by stereolithography, vol.4575330, 1984.

N. Serres, D. Tidu, S. Sankare, and F. Hlawka, Environmental comparison of MESO-CLAD® process and conventional machining implementing life cycle assessment, J. Clean. Prod, vol.19, issue.9, pp.1117-1124, 2011.

A. Ewald and J. Schlattmann, Design guidelines for laser metal deposition of lightweight structures, J. Laser Appl, vol.30, issue.3, p.32309, 2018.

B. Berman, 3-D printing: The new industrial revolution, Bus. Horiz, vol.55, issue.2, pp.155-162, 2012.

W. Associates, Wohlers Report, 2018.

S. W. Williams, F. Martina, A. C. Addison, J. Ding, G. Pardal et al., Wire + Arc Additive Manufacturing, Mater. Sci. Technol, vol.32, issue.7, pp.641-647, 2015.

D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann, Additive manufacturing of metals, Acta Mater, vol.117, pp.371-392, 2016.

C. R. Deckard, Apparatus for producing parts by selective sintering, vol.5597589, 1997.

M. Fischer, Elaboration in situ d'alliages de titane et de structure architecturées par fabrication additive -Application aux dispositifs médicaux implantables, 2017.

H. J. Maier, On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance, Int. J. Fatigue, vol.48, pp.300-307, 2012.

I. Tolosa, F. Garciandía, F. Zubiri, F. Zapirain, and A. Esnaola, Study of mechanical properties of AISI 316 stainless steel processed by 'selective laser melting', following different manufacturing strategies, Int. J. Adv. Manuf. Technol, vol.51, issue.5-8, pp.639-647, 2010.

E. O. Olakanmi, R. F. Cochrane, and K. W. Dalgarno, A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties, Prog. Mater. Sci, vol.74, pp.401-477, 2015.

L. N. Carter, C. Martin, P. J. Withers, and M. M. Attallah, The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy, J. Alloys Compd, vol.615, pp.338-347, 2014.

L. Wu, H. Zhu, X. Gai, and Y. Wang, Evaluation of the mechanical properties and porcelain bond strength of cobalt-chromium dental alloy fabricated by selective laser melting, J. Prosthet. Dent, vol.111, issue.1, pp.51-55, 2014.

A. Popovich, V. Sufiiarov, I. Polozov, E. Borisov, D. Masaylo et al., Microstructure and mechanical properties of additive manufactured copper alloy, Mater. Lett, vol.179, pp.38-41, 2016.

M. Khan and P. Dickens, Selective Laser Melting (SLM) of pure gold, Gold Bull, vol.43, issue.2, pp.114-121, 2010.

T. Craeghs, L. Thijs, F. Verhaeghe, J. Kruth, and J. Van-humbeeck, A study of the microstructural evolution during selective laser melting of Ti-6Al-4V, Acta Mater, vol.58, issue.9, pp.3303-3312, 2010.

I. Koutiri, E. Pessard, P. Peyre, O. Amlou, and T. De-terris, Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts, J. Mater. Process. Technol, vol.255, pp.536-546, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01826611

S. Saedi, N. Moghaddam, A. Amerinatanzi, M. Elahinia, and H. E. Karaca, On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi, Acta Mater, vol.144, pp.552-560, 2018.

P. Hanzl, M. Zetek, T. Bak?a, and T. Kroupa, The influence of processing parameters on the mechanical properties of SLM parts, Procedia Eng, vol.100, pp.1405-1413, 2015.

I. Y. Mugwagwaa, *. , D. Dimitrova, and S. Matopea, Influence of process parameters on residual stress related distortions Influence of process parameters on residual stress related distortions in selective laser melting in selective laser melting Costing models for of capacity in Industry between used cap, Procedia Manuf, vol.21, pp.92-99, 2017.

Y. Al-meslemi, N. Anwer, and L. Mathieu, Modeling Key Characteristics in the Value Chain of Additive Manufacturing, Procedia CIRP, vol.70, pp.90-95, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01822160

M. Simonelli, Y. Y. Tse, and C. Tuck, Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6Al-4V, Mater. Sci. Eng. A, vol.616, pp.1-11, 2014.

C. Li, J. F. Liu, and Y. B. Guo, Prediction of Residual Stress and Part Distortion in Selective Laser Melting, Procedia CIRP, vol.45, pp.171-174, 2016.

C. Li, C. H. Fu, Y. B. Guo, and F. Z. Fang, A multiscale modeling approach for fast prediction of part distortion in selective laser melting, J. Mater. Process. Technol, vol.229, pp.703-712, 2015.

Z. Baicheng, Study of selective laser melting ( SLM ) Inconel 718 part surface improvement by electrochemical polishing, Mater. Des, vol.116, pp.531-537, 2017.

F. Salvatore, Experimental and numerical study of media action during tribofinishing in the case of SLM titanium parts, Procedia CIRP, vol.58, pp.451-456, 2017.

K. C. Yung, T. Y. Xiao, H. S. Choy, W. J. Wang, and Z. X. Cai, Laser polishing of additive manufactured CoCr alloy components with complex surface geometry, J. Mater. Process. Tech, vol.262, pp.53-64, 2018.

E. Brinksmeier, G. Levy, D. Meyer, and A. B. Spierings, Surface integrity of selective-laser-melted components, CIRP Ann. -Manuf. Technol, vol.59, issue.1, pp.601-606, 2010.

P. Stavropoulos, P. Foteinopoulos, A. Papacharalampopoulos, and H. Bikas, Addressing the challenges for the industrial application of additive manufacturing : Towards a hybrid solution, Int. J. Light. Mater. Manuf, vol.1, issue.3, pp.157-168, 2018.

W. S. Harun, A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications, Powder Technol, vol.331, pp.74-97, 2018.

D. Shidid, M. Leary, P. Choong, and M. Brandt, Just-in-time design and additive manufacture of patient-specific medical implants, Phys. Procedia, vol.83, pp.4-14, 2016.

M. Leary, Design of titanium implants for additive manufacturing, 2018.

W. Chen, Lattice Ti Structures with Low Rigidity But Compatible Mechanical Strength : Design of Implant Materials for Trabecular Bone, vol.17, pp.793-799, 2016.

X. Wang, Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review, Biomaterials, vol.83, pp.127-141, 2016.

D. Leordean, C. Dudescu, T. Marcu, P. Berce, and N. Balc, Customized implants with specific properties, made by selective laser melting, Rapid Prototyp. J, vol.21, issue.1, pp.98-104, 2015.

K. Moiduddin, A. Al-ahmari, M. A. Kindi, E. S. Nasr, A. Mohammad et al., Customized porous implants by additive manufacturing for zygomatic reconstruction, Biocybern. Biomed. Eng, vol.36, issue.4, pp.719-730, 2016.

K. Moiduddin, S. Darwish, A. , and S. Elwatidy, Structural and mechanical characterization of custom design cranial implant created using additive manufacturing, Electron. J. Biotechnol, vol.29, pp.22-31, 2017.

S. C. Cosma, N. Balc, D. Leordean, M. Moldovan, M. Dudescu et al., Customized medical applications of selective laser melting manufacturing, Acad. J. Manuf. Eng, vol.13, issue.1, 2015.

J. Chen, Z. Zhang, X. Chen, C. Zhang, G. Zhang et al., Design and manufacture of customized dental implants by using reverse engineering and selective laser melting technology, J. Prosthet. Dent, vol.112, issue.5, pp.1088-95, 2014.

N. Otawa, Custom-made titanium devices as membranes for bone augmentation in implant treatment: Modeling accuracy of titanium products constructed with selective laser melting, J. Cranio-Maxillofacial Surg, vol.43, issue.7, pp.1289-1295, 2015.

Y. Li, C. Yang, H. Zhao, S. Qu, X. Li et al., New Developments of Ti-Based Alloys for Biomedical Applications, Materials (Basel), vol.7, pp.1709-1800, 2014.

P. Laheurte, W. Elmay, F. Prima, and T. Gloriant, Titane et alliages des matériaux de choix pour les applications médicales, Tech. l'ingénieur, vol.33, issue.0, 2014.

W. Elmay, Effects of thermomechanical process on the microstructure and mechanical properties of a fully martensitic titanium-based biomedical alloy, J. Mech. Behav. Biomed. Mater, vol.18, pp.47-56, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00919290

M. Fischer, D. Joguet, G. Robin, L. Peltier, and P. Laheurte, In situ elaboration of a binary Ti-26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders, Mater. Sci. Eng. C, vol.62, pp.852-859, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01515203

H. Wang and K. Al-shammari, HVC ridge deficiency classification: a therapeutically oriented classification, Int. J. Periodontics Restorative Dent, 2002.

C. E. Misch, Density of bone: effect on treatment plans, surgical approach, healing, and progressive boen loading, Int. J. Oral Implantol, 1990.

A. Katranji, K. Misch, and H. Wang, Cortical Bone Thickness in Dentate and Edentulous Human Cadavers, J. Periodontol, vol.78, issue.5, pp.874-878, 2007.

C. Maiorana, M. Cicciù, D. Andreoni, and M. Beretta, Immediate loading of single tooth: Case report and review of the literature, J. Osseointegration, vol.1, issue.3, pp.104-113, 2009.

P. Bravetti, Gestes implantaires : Connaissances anatomiques indispensables, 2012.

T. Oh, J. Yoon, C. E. Misch, and H. Wang, The Causes of Early Implant Bone Loss: Myth or Science?, J. Periodontol, 2005.

G. Scortecci, C. Misch, and G. Odin, Implantologie basale : une approche thérapeutique fondée sur la preuve, vol.12, pp.35-47, 2003.

J. Donsimoni, D. Gabrieleff, P. Bermot, and D. Dohan, Les implants maxillofaciaux à plateaux d'assise Concepts et technologies orthopédiques, réhabilitations maxillomandibulaires, reconstructions maxillofaciales, réhabilitations dentaires partielles, techniques de réintervention, méta-analyse, Implantodontie, vol.13, pp.139-150, 2004.

G. Odin, G. Scortecci, F. Levratto, and L. Morin, Techniques avancées en implantologie basale, vol.11, 2011.

T. S. Lee, Standardization of surgical techniques used in facial bone contouring, J. Plast. Reconstr. Aesthetic Surg, vol.68, issue.12, pp.1694-1700, 2015.

G. Odin, C. E. Misch, I. Binderman, and G. Scortecci, Fixed Rehabilitation of Severely Atrophic Jaws Using Immediately Loaded Basal Disk Implants After In Situ Bone Activation, J. Oral Implantol, vol.38, issue.5, pp.611-616, 2012.

G. Odin, T. Balaguer, C. Savoldelli, and G. Scortecci, Immediate Functional Loading of an Implant-Supported Fixed Prosthesis at the Time of Ablative Surgery and Mandibular Reconstruction for Squamous Cell Carcinoma, J. Oral Implantol, vol.36, issue.3, pp.225-230, 2010.

P. Didier, B. Piotrowski, M. Fischer, and P. Laheurte, Mechanical stability of custommade implants : Numerical study of anatomical device and low elastic Young ' s modulus alloy, Mater. Sci. Eng. C, 2016.

G. Odin, C. Savoldelli, P. Bouchard, and Y. Tillier, Determination of Young's modulus of mandibular bone using inverse analysis, Med. Eng. Phys, vol.32, issue.6, pp.630-637, 2010.

O. Röhrle, H. Saini, and D. C. Ackland, Occlusal loading during biting from an experimental and simulation point of view, Dent. Mater, vol.34, issue.1, pp.58-68, 2018.

P. W. Christensen and A. Klarbring, An Introduction to Structural Optimization, 2009.

M. P. Bendsøe and N. Kikuchi, Generating optimal topologies in structural design using a homogenization method, Comput. Methods Appl. Mech. Eng, 1988.

M. P. Bendsøe and O. Sigmund, Topology optimization: theory, methods, and applications, 2003.

K. Svanberg and H. Svärd, Density filters for topology optimization based on the Pythagorean means, Struct. Multidiscip. Optim, 2013.

J. Favre, P. Lohmuller, B. Piotrowski, S. Kenzari, P. Laheurte et al., A continuous crystallographic approach to generate cubic lattices and its effect on relative stiffness of architectured materials, Addit. Manuf, vol.21, pp.359-368, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01761428

T. Yamazaki, Development of A Hybrid Multi-tasking Machine Tool: Integration of Additive Manufacturing Technology with CNC Machining, Procedia CIRP, vol.42, pp.81-86, 2016.

Z. Chen, X. Wu, D. Tomus, and C. H. Davies, Surface roughness of Selective Laser Melted Ti-6Al-4V alloy components, Addit. Manuf, vol.21, pp.91-103, 2018.

T. Nguyen, L. Cevidanes, M. A. Cornelis, G. Heymann, L. K. De-paula et al., Three-dimensional assessment of maxillary changes associated with bone anchored maxillary protraction, Am. J. Orthod. Dentofac. Orthop, vol.140, issue.6, pp.790-798, 2011.

J. Brunso, M. Franco, and T. Constantinescu, Custom-Machined Miniplates and Bone-Supported Guides for Orthognathic Surgery : A New Surgical Procedure, pp.1-12, 2016.

I. Hilerio, T. Mathia, and C. Alepee, 3D measurements of the knee prosthesis surfaces applied in optimizing of manufacturing process, Wear, vol.257, issue.12, pp.1230-1234, 2004.

P. Papaspyridakos, C. J. Chen, M. Singh, H. P. Weber, and G. O. Gallucci, Success criteria in implant dentistry: A systematic review, J. Dent. Res, vol.91, issue.3, pp.242-248, 2012.

H. Chang, Y. Chen, and Y. Hsieh, Stress distribution of two commercial dental implant systems : A three-dimensional finite element analysis, J. Dent. Sci, vol.8, issue.3, pp.261-271, 2013.

D. Bozkaya, S. Müftü, and A. Müftü, Evaluation of load transfer characteristics of five different implants in compact bone at different load levels by finite element analysis, J. Prosthet. Dent, issue.617, 2003.

L. Baggi, I. Cappelloni, F. Maceri, and G. Vairo, Stress-based performance evaluation of osseointegrated dental implants by finite-element simulation, Simul. Model. Pract. Theory, vol.16, pp.971-987, 2008.

M. I. El-anwar and M. M. El-zawahry, A three dimensional finite element study on dental implant design, J. Genet. Eng. Biotechnol, vol.9, issue.1, pp.77-82, 2011.

T. Li, Optimum selection of the dental implant diameter and length in the posterior mandible with poor bone quality -A 3D finite element analysis, Appl. Math. Model, vol.35, issue.1, pp.446-456, 2011.

L. Kong, Bivariate Evaluation of Cylinder Implant Diameter and Length : A Three-Dimensional Finite Element Analysis, J. Prosthodont, vol.17, pp.286-293, 2008.

T. Li, Selection of optimal dental implant diameter and length in type IV bone : a three-dimensional finite element analysis, Int. J. Oral Maxillofac. Surg, pp.1077-1083, 2009.

L. Himmlova, T. Dostalova, A. Kacovsky, and S. Konvickova, Influence of implant length and diameter on stress distribution: A finite element analysis, J. Prosthet. Dent, vol.91, issue.1

N. Ueda, Y. Takayama, and A. Yokoyama, Minimization of dental implant diameter and length according to bone quality determined by finite element analysis and optimized calculation, J. Prosthodont. Res, pp.1-9, 2016.

N. Okumura, R. Stegaroiu, E. Kitamura, K. Kurokawa, and S. Nomura, Influence of maxillary cortical bone thickness , implant design and implant diameter on stress 200 around implants : A three-dimensional finite element analysis, J. Prosthodont. Res, vol.54, issue.3, pp.133-142, 2010.

L. Kong, Biomechanical Optimization of Implant Diameter and Length for Immediate Loading : Biomechanical Optimization of Implant Diameter and Length for Immediate Loading : A Nonlinear Finite Element Analysis, Int. J. Prosthodont, 2009.

C. S. Petrie and J. L. Williams, Comparative evaluation of implant designs : influence of diameter , length , and taper on strains in the alveolar crest, Clin. Oral Implants Res, pp.486-494, 2005.

H. Huang, C. Chang, J. Hsu, and A. M. Fallgatter, Comparison of Implant Body Designs and Threaded Designs of Dental Implants : A 3-dimensional Finite Element Analysis, Int. J. Oral Maxillofac. Implants, pp.551-562, 2007.

C. Lee, S. Lin, M. Kang, S. Wu, and P. Fu, Effects of implant threads on the contact area and stress distribution of marginal bone, J. Dent. Sci, vol.5, issue.3, pp.156-165, 2010.

J. H. Chun and S. Y. Cheong, Evaluation of design parameters of osseointegrated dental implants using finite element analysis, J. Oral Rehabil, 1998.

S. Hansson and M. Werke, The implant thread as a retention element in cortical bone : the effect of thread size and thread profile : a finite element study, J. Biomech, vol.36, pp.1247-1258, 2003.

G. Vairo and G. Sannino, Comparative Evaluation of Osseointegrated Dental Implants Based on Platform-Switching Concept : Influence of Diameter , Length , Thread Shape , and In-Bone Positioning Depth on Stress-Based Performance, Comput. Math. Methods Med, vol.2013, 2013.

J. Ao, Optimal design of thread height and width on an immediately loaded cylinder implant : A finite element analysis, Comput. Biol. Med, vol.40, issue.8, pp.681-686, 2010.

L. Kong, Evaluation of the Cylinder Implant Thread Height and Width : A 3-dimensional Finite Element Analysis, Int. J. Oral Maxillofac. Implants, pp.65-74, 2008.

M. M. Oswal, U. N. Amasi, M. S. Oswal, and A. S. Bhagat, Influence of three different implant thread designs on stress distribution : A three -dimensional finite element analysis, J. Indian Prosthodont. Soc, pp.359-365, 2016.

H. Chou and S. Müftü, Combined effects of implant insertion depth and alveolar bone quality on periimplant bone strain induced by a wide-diameter , short implant and a narrow-diameter , long implant, J. Prosthet. Dent, vol.104, issue.5, pp.293-300

K. Yoon, S. Kim, J. Lee, and S. Suh, 3D Finite Element Analysis of Changes in Stress Levels and Distributions for an Osseointegrated Implant After Vertical, pp.354-359, 2011.

E. Kitamura, R. Stegaroiu, S. Nomura, and O. Miyakawa, Influence of marginal bone resorption on stress around an implant -a three-dimensional finite element analysis, J. Oral Rehabil, issue.17, 2005.

L. Favot, V. Berry-kromer, M. Haboussi, F. Thiebaud, and T. Ben-zineb, Numerical study of the influence of material parameters on the mechanical behaviour of a rehabilitated edentulous mandible, J. Dent, vol.2, issue.42, pp.297-297, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01424969

H. E. Peixoto, P. R. Camati, F. Faot, B. S. Sotto-maior, E. F. Martinez et al., Rehabilitation of the atrophic mandible with short implants in different positions: A finite elements study, Mater. Sci. Eng. C, vol.80, pp.122-128, 2017.

K. Wang, J. Geng, D. Jones, and W. Xu, Comparison of the fracture resistance of dental implants with different abutment taper angles, Mater. Sci. Eng. C, vol.63, pp.164-171, 2016.

K. Tian, J. Chen, L. Han, J. Yang, W. Huang et al., Angled abutments result in increased or decreased stress on surrounding bone of single-unit dental implants: A finite element analysis, Med. Eng. Phys, vol.34, issue.10, pp.1526-1531, 2012.

C. Lin, J. Wang, M. S. Ramp, and P. Liu, Biomechanical Response of Implant Systems Placed in the Maxillary Posterior Region Under Various Conditions of Angulation , Bone Density , and Loading, Int. J. Oral Maxillofac. Implants, pp.57-64, 2008.

F. Lofaj, J. Kucera, D. Nemeth, and L. Kvetkova, Finite element analysis of stress distributions in mono-and bi-cortical dental implants, Mater. Sci. Eng. C, vol.50, pp.85-96, 2015.

K. Akca and M. C. Cehreli, Biomechanical consequences of progressive marginal bone loss around oral implants : a finite element stress analysis, Med. Biol. Eng. Comput, pp.527-535, 2006.

G. Tepper, R. Haas, W. Watzek, Z. Wolfgang, and K. Georg, Three-dimensional finite element analysis of implant stability in the atrophic posterior maxilla A mathematical study of the sinus floor, Clin. Oral Implants Res, pp.657-665, 1999.

J. Wolff, Finite element analysis of bone loss around failing implants, Mater. Des, vol.61, pp.177-184, 2014.

P. Marcián, L. Borák, J. Valá?ek, J. Kaiser, Z. Florian et al., Finite element analysis of dental implant loading on atrophic and non-atrophic cancellous and cortical mandibular bone -a feasibility study, J. Biomech, vol.47, issue.16, pp.3830-3836, 2014.

I. Linetskiy, V. Demenko, L. Linetska, and O. Yefremov, Impact of annual bone loss and different bone quality on dental implant success -A finite element study, Comput. Biol. Med, 2017.

A. N. Natali, P. G. Pavan, and A. L. Ruggero, Analysis of bone -implant interaction phenomena by using a numerical approach, Clin. Oral Implants Res, pp.67-74, 2003.

T. Sugiura, K. Yamamoto, S. Horita, K. Murakami, S. Tsutsumi et al., The effects of bone density and crestal cortical bone thickness on micromotion and periimplant bone strain distribution in an immediately loaded implant : a nonlinear finite element analysis, J. Periodontal Implant Sci, vol.46, issue.3, p.202, 2016.

K. Premnath, J. Sridevi, N. Kalavathy, P. Nagaranjani, and M. R. Sharmila, Evaluation of Stress Distribution in Bone of Different Densities Using Different Implant Designs : A Three-Dimensional Finite Element Analysis, J. Indian Prosthodont. Soc, vol.13, issue.4, pp.555-559, 2013.

D. Kurniawan, F. M. Nor, H. Y. Lee, and J. Y. Finite, Finite element analysis of bone -implant biomechanics : refinement through featuring various osseointegration conditions, Int. J. Oral Maxillofac. Surg, vol.41, issue.9, pp.1090-1096, 2012.

B. Piotrowski, A. A. Baptista, E. Patoor, P. Bravetti, A. Eberhardt et al., Interaction of bone-dental implant with new ultra low modulus alloy using a numerical approach, Mater. Sci. Eng. C, vol.38, issue.1, pp.151-160, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01203048

B. Bahrami, S. Shahrbaf, B. Mirzakouchaki, F. Ghalichi, M. Ashtiani et al., Effect of surface treatment on stress distribution in immediately loaded dental implants -A 3D finite element analysis, Dent. Mater, vol.30, issue.4, pp.1-9, 2014.

H. Huang, J. Hsu, L. Fuh, D. Lin, and M. Y. Chen, Biomechanical simulation of various surface roughnesses and geometric designs on an immediately loaded dental implant, Comput. Biol. Med, vol.40, issue.5, pp.525-532, 2010.

R. C. Savadi and J. Agarwal, Influence of Implant Surface Topography and Loading Condition on Stress Distribution in Bone Around Implants : A Comparative 3D FEA, J. Indian Prosthodont. Soc, vol.11, issue.4, pp.221-231, 2011.

S. Sakka, K. Baroudi, and M. Z. Nassani, Factors associated with early and late failure of dental implants, J. Investig. Clin. Dent, vol.3, issue.4, pp.258-261, 2012.

J. Goupy and L. Creighton, Introduction aux Plans d'expériences, 2001.

C. Dorow, N. Krstin, and F. G. Sander, Experiments to determine the material properties of the periodontal ligament, J. Orofac. Orthop, vol.63, issue.2, pp.94-104, 2002.

K. Dep, Multi-Objective Optimization Using Evolutionary Algorithms, 2001.

L. , Topology optimization and additive manufacturing for aerospace components, Prog. Addit. Manuf, 2019.

A. A. Al-tamimi, Metallic bone fixation implants : a novel design approach for reducing the stress shielding phenomenon, Virtual Phys. Prototyp, vol.2759, 2017.

C. L. Chang, C. S. Chen, C. H. Huang, and M. L. Hsu, Finite element analysis of the dental implant using a topology optimization method, Med. Eng. Phys, vol.34, issue.7, pp.999-1008, 2012.

A. Sutradhar, J. Park, D. Carrau, T. H. Nguyen, M. J. Miller et al., Designing patient-specific 3D printed craniofacial implants using a novel topology optimization method, Med. Biol. Eng. Comput, vol.54, issue.7, pp.1123-1135, 2016.

H. Kang, J. P. Long, S. J. Hollister, and S. A. Goldstein, A paradigm for the development and evaluation of novel implant topologies for bone fixation: In vivo evaluation, J. Biomech, vol.45, issue.15, p.203, 2012.

R. J. Yang and C. J. Chen, Stress-based topology optimization, Struct. Optim, 1996.

R. Mericske-stern, M. Piotti, and G. Sirtes, 3-D in vivo force measurements on mandibular implants supporting overdentures. A comparative study, Clinical Oral Implants Research, vol.7, issue.4, pp.387-396, 2003.

G. Nyquist and B. Owall, Masticatory load registrations during function. A methodological study, Odontol. Revy, 1968.

T. W. Korioth and A. G. Hannam, Deformation of the Human Mandible During Simulated Tooth Clenching, J. Dent. Res, vol.73, issue.1, pp.56-66, 1994.

M. S. Commisso, J. Martínez-reina, J. Ojeda, and J. Mayo, Finite element analysis of the human mastication cycle, J. Mech. Behav. Biomed. Mater, vol.41, pp.23-35, 2015.

F. H. Netter, Atlas of Human Anatomy, Professional Edition, 2011.

G. J. Pruim, H. J. De-jongh, and J. J. Bosch, Forces acting on the mandible during bilateral static bite at different bite force levels, J. Biomech, 1980.

J. D. Van-willigen and J. Weijs-boot, Phasic and rhythmic responses of the oral musculature to mechanical stimulation of the rat palate, Arch. Oral Biol, 1984.

O. Sigmund, Morphology-based black and white filters for topology optimization, vol.33, 2007.

Y. Saadlaoui, J. L. Milan, J. M. Rossi, and P. Chabrand, Topology optimization and additive manufacturing: Comparison of conception methods using industrial codes, J. Manuf. Syst, vol.43, pp.178-186, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01691151

D. Brackett, I. Ashcroft, and R. Hague, Topology optimization for additive manufacturing, 22nd Annual International Solid Freeform Fabrication Symposium -An Additive Manufacturing Conference, 2011.

S. Liu, Q. Li, J. Liu, W. Chen, and Y. Zhang, A Realization Method for Transforming a Topology Optimization Design into Additive Manufacturing Structures, vol.4, pp.277-285, 2018.

G. Costa, M. Montemurro, and J. Pailhès, NURBS hyper-surfaces for 3D topology optimization problems, Mech. Adv. Mater. Struct, 2019.

A. Panesar, M. Abdi, D. Hickman, and I. Ashcroft, Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing, Addit. Manuf, vol.19, pp.81-94, 2018.

A. M. Mirzendehdel and K. Suresh, Support structure constrained topology optimization for additive manufacturing, CAD Comput. Aided Des, 2016.

A. T. Gaynor and J. K. Guest, Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design, Struct. Multidiscip. Optim, vol.54, issue.5, pp.1157-1172, 2016.

P. Michalik, J. Zajac, M. Hatala, D. Mital, and V. Fecova, Monitoring surface roughness of thin-walled components from steel C45 machining down and up milling, MEASUREMENT, vol.58, pp.416-428, 2014.

S. Seguy, G. Dessein, and L. Arnaud, Surface roughness variation of thin wall milling, related to modal interactions, Int. J. Mach. Tools Manuf, vol.48, issue.3-4, pp.261-274, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00748570

V. Thevenot, L. Arnaud, G. Dessein, and G. Cazenave-larroche, Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling, Int. J. Adv. Manuf. Technol, vol.27, issue.7-8, pp.638-644, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00800292

Y. Altinta? and E. Budak, Analytical Prediction of Stability Lobes in Milling, CIRP Ann. -Manuf. Technol, vol.44, issue.1, pp.357-362, 1995.

B. Denkena and C. Schmidt, Experimental investigation and simulation of machining thin-walled workpieces, Prod. Eng, vol.1, issue.4, pp.343-350, 2007.

S. Smith, R. Wilhelm, B. Dutterer, H. Cherukuri, and G. Goel, Sacrificial structure preforms for thin part machining, CIRP Ann. -Manuf. Technol, vol.61, issue.1, pp.379-382, 2012.

K. Kolluru, D. Axinte, and A. Becker, A solution for minimising vibrations in milling of thin walled casings by applying dampers to workpiece surface, CIRP Ann. -Manuf. Technol, vol.62, issue.1, pp.415-418, 2013.

L. Mugwagwa, D. Dimitrov, S. Matope, and I. Yadroitsev, Influence of process parameters on residual stress related distortions in selective laser melting, Procedia Manuf, vol.21, pp.92-99, 2017.

K. Zeng, D. Pal, C. Teng, and B. E. Stucker, Evaluations of effective thermal conductivity of support structures in selective laser melting, Addit. Manuf, vol.6, pp.67-73, 2015.

G. Strano, L. Hao, R. M. Everson, and K. E. Evans, A new approach to the design and optimisation of support structures in additive manufacturing, Int. J. Adv. Manuf. Technol, vol.66, issue.9, pp.1247-1254, 2013.

S. Jayaram, S. G. Kapoor, and R. E. Devor, Estimation of the specific cutting pressures for mechanistic cutting force models, Int. J. Mach. Tools Manuf, vol.41, issue.2, pp.265-281, 2001.

D. Montgomery and Y. Altintas, Mechanism of Cutting Force and Surface Generation in Dynamic Milling, J. Eng. Ind, vol.113, issue.2, p.160, 1991.

E. Budak, Y. Altinta?, and E. J. Armarego, Prediction of Milling Force Coefficients From Orthogonal Cutting Data, J. Manuf. Sci. Eng, vol.118, issue.2, p.216, 2008.

A. Moufki, D. Dudzinski, A. Molinari, and M. Rausch, Thermoviscoplastic modelling of oblique cutting : forces and chip # ow predictions, vol.42, pp.1205-1232, 2000.

A. Moufki, D. Dudzinski, and G. L. Coz, Prediction of cutting forces from an analytical model of oblique cutting, application to peripheral milling of Ti-6Al-4V alloy, Int. J. Adv. Manuf. Technol, vol.81, issue.1-4, pp.615-626, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01514745

H. W. Jr and D. S. Kleponis, Modeling the high strain rate behavior of 205

, Titanium undergoing ballistic impact and penetration, Int. J. Impact Eng, vol.26, pp.509-521, 2001.

V. S. Deshpande, N. A. Fleck, and M. F. Ashby, Effective properties of the octet-truss lattice material, vol.49, pp.1747-1769, 2001.

G. P. Steven, Homogenization of multicomponent composite orthotropic materials using fea, Commun. Numer. Methods Eng, vol.13, issue.7, pp.517-531, 1997.

S. Xu, J. Shen, S. Zhou, X. Huang, and Y. M. Xie, Design of lattice structures with controlled anisotropy, Mater. Des, vol.93, pp.443-447, 2016.

Y. Amani, S. Dancette, P. Delroisse, A. Simar, and E. Maire, Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches, Acta Mater, vol.159, pp.395-407, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01890580

S. L. Sing, W. Y. Yeong, F. E. Wiria, and B. Y. Tay, Characterization of Titanium Lattice Structures Fabricated by Selective Laser Melting Using an Adapted Compressive Test Method, Exp. Mech, vol.56, issue.5, pp.735-748, 2016.

R. Wauthle, Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures, Addit. Manuf, vol.5, pp.77-84, 2015.

S. Van-bael, G. Kerckhofs, M. Moesen, G. Pyka, J. Schrooten et al., Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures, Mater. Sci. Eng. A, vol.528, issue.24, pp.7423-7431, 2011.

M. Leary, Selective laser melting (SLM) of AlSi12Mg lattice structures, Mater. Des, vol.98, pp.344-357, 2016.

M. Arizmendi, Model for surface topography prediction in peripheral milling considering tool vibration, CIRP Ann. -Manuf. Technol, 2009.

P. G. Benardos and G. C. Vosniakos, Prediction of surface roughness in CNC face milling using neural networks and Taguchi's design of experiments, Robot. Comput. Integr. Manuf, 2002.

L. J. Gibson and M. F. Ashby, The Mechanics of Three-Dimensional Cellular Materials, Proc. R. Soc. A Math. Phys. Eng. Sci, vol.382, issue.1782, pp.43-59, 1982.

F. Cabanettes, Topography of as built surfaces generated in metal additive manufacturing: A multi scale analysis from form to roughness, Precis. Eng, vol.52, pp.249-265, 2017.

R. F. Wallin and P. J. Upman, A Practical Guide to ISO 10993, Med. Device Diagnostic Ind. Mag, 1998.

M. B. Nasab, M. R. Hassan, B. Bin, and . Sahari, Metallic biomaterials of knee and hip -A review, Trends Biomater. Artif. Organs, vol.24, issue.2, pp.69-82, 2010.

C. C. Gomes-moura, Effects of Titanium Surfaces on the Developmental Profile of Monocytes/Macrophages, vol.25, p.206, 2014.

W. A. Soskolne, S. Cohen, L. Sennerby, A. Wennerberg, and L. Shapira, The effect of titanium surface roughness on the adhesion of monocytes and their secretion of TNF-? and PGE2, Clin. Oral Implants Res, vol.13, issue.1, pp.86-93, 2002.

S. D. Rogers, D. W. Howie, S. E. Graves, M. J. Pearcy, and D. R. Haynes, in Vitro Human Monocyte Response To Wear Particles of Titanium Alloy Containing Vanadium or Niobium, J. Bone Joint Surg. Br, vol.79, issue.2, pp.311-315, 1997.

L. Ponsonnet, Relationship between surface properties (roughness, wettability) of titanium and titanium alloys and cell behaviour, Mater. Sci. Eng. C, vol.23, issue.4, pp.551-560, 2003.

T. P. Kunzler, T. Drobek, M. Schuler, and N. D. Spencer, Systematic study of osteoblast and fibroblast response to roughness by means of surface-morphology gradients, Biomaterials, vol.28, issue.13, pp.2175-2182, 2007.

J. Lincks, Response ofMG63 osteoblast-like cells to titanium and titanium alloy is dependent on surface roughness and composition, Biomaterials, vol.19, pp.2219-2232, 1998.

J. I. Rosales-leal, Effect of roughness, wettability and morphology of engineered titanium surfaces on osteoblast-like cell adhesion, Colloids Surfaces A Physicochem. Eng. Asp, vol.365, issue.1-3, pp.222-229, 2010.