J. A. Sanchez-perez, E. M. Rodriguez-porcel, J. L. Casas-lopez, J. M. Fernandez, Y. Sevilla et al., Shear rate in stirred tank and bubble column bioreactors, Chemical Engineering Journal, vol.124, issue.1-3, pp.1-5, 2006.

R. K. Thakur, C. Vial, K. Nigam, E. B. Nauman, and G. Djelveh, Static mixers in the process industries-a review, Chemical Engineering Research and Design, vol.81, issue.7, pp.787-826, 2003.

A. Heyouni, M. Roustan, and Z. Do-quang, Hydrodynamics and mass transfer in gas-liquid flow through static mixers, Chemical Engineering Science, vol.57, issue.16, pp.3325-3333, 2002.

H. P. Grace, Dispersion phenomena in high viscosity immiscible fluid systems and application of static mixers as dispersion devices in such systems, Chemical Engineering Communications, vol.14, issue.3-6, pp.225-277, 1982.

H. Z. Li, C. Fasol, and L. Choplin, Hydrodynamics and heat transfer of rheologically complex fluids in a sulzer smx static mixer, Chemical Reaction Engineering : From Fundamentals to Commercial Plants and Products, vol.51, issue.10, p.37, 1996.

J. Legrand, P. Morançais, and G. Carnelle, Liquid-liquid dispersion in an smx-sulzer static mixer, Chemical Engineering Research and Design, vol.79, issue.8, p.30, 2001.

L. Fradette, H. Li, L. Choplin, and P. Tanguy, Gas/liquid dispersions with a smx static mixer in the laminar regime, Chemical Engineering Science, vol.61, issue.11, p.31, 2006.

C. M. Madhuranthakam, Q. Pan, and G. L. Rempel, Hydrodynamics in sulzer smx static mixer with air/water system, Industrial & Engineering Chemistry Research, vol.48, issue.2, p.38, 2009.

M. Scala, L. Gamet, L. Malbec, and H. Li, Hydrodynamics of gas-liquid dispersion in transparent sulzer static mixers smxtm, Chemical Engineering Science, vol.213, p.115398, 2020.

M. Sathe, J. , I. H. Thaker, T. E. Strand, and J. B. Joshi, Advanced piv/lif and shadowgraphy system to visualize flow structure in two-phase bubbly flows, Chemical Engineering Science, vol.65, issue.8, pp.2431-2442, 2010.

. Openfoam, The Open Source CFD Toolbox, User Guide. Version v1806, ESI

A. Nienow, Mass Transfer and Mixing Across the Scales in Animal Cell Culture, pp.137-169, 2015.

S. Akbulut, Z. K. Albayrak, and S. Arasan, Surfactant modified clays consistency limits and contact angles, Earth Sciences Research Journal, vol.16, pp.95-101, 2012.

P. and D. Marco, Birth, life and death of gas bubbles rising in a stagnant liquid, International Journal of Heat and Technology, vol.23, 2005.

R. P. Website, www.reactor-physics.com. Quoted at pages XXVII and 9

Y. Cengel and J. Cimbala, Fluid Mechanics : Fundamentals and Applications, 01 2006. Quoted at pages XXVII and 10

C. Leonard, J. Ferrasse, O. Boutin, L. Sébastien, and A. Viand, Bubble column reactors for high pressures and high temperatures operation, vol.100, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01292678

. Stamixco, Static mixer products & technology

M. Scala, Vof methods for the simulation of two phase flows : Application to the smx static mixer, 2016.

N. Ioannou, H. Liu, and Y. H. Zhang, Droplet dynamics in confinement, Journal of Computational Science, vol.17, pp.463-474, 2016.

H. Meijer, M. Singh, and P. Anderson, On the performance of static mixers : A quantitative comparison, Progress in Polymer Science, vol.37, pp.1333-1349, 2012.

H. Z. Li, C. Fasol, and L. Choplin, Pressure drop of newtonian and non-newtonian fluids across a sulzer smx static mixer, Chemical Engineering Research and Design, vol.75, issue.8, pp.792-796, 1997.

J. M. Zalc, E. S. Szalai, and F. J. Muzzio, Mixing dynamics in the smx static mixer as a function of injection location and flow ratio, Polymer Engineering Science, vol.43, issue.4, pp.875-890, 2003.

D. Rauline, P. A. Tanguy, J. Blevec, and J. Bousquet, Numerical investigation of the performance of several static mixers, The canadian journal of chemical engineering, vol.76, 1998.

D. Rauline, J. Blevec, J. Bousquet, and P. A. Tanguy, A comparative assessment of the performance of the kenics and smx static mixers, Chemical Engineering Research and Design, vol.78, issue.3, pp.389-396, 2000.

S. Hirschberg, R. Koubek, F. Moser, and J. Schock, An improvement of the sulzer smx static mixer significantly reducing the pressure drop, Chemical Engineering Research Design, vol.87, pp.14-17, 2009.

M. Heniche, P. Tanguy, M. F. Reeder, and J. Fasano, Numerical investigation of blade shape in static mixing, AIChE Journal, vol.51, pp.44-58, 2005.

S. Liu, A. N. Hrymak, and P. E. Wood, Drop breakup in an smx static mixer in laminar flow, The canadian journal of chemical engineering, vol.83, p.45, 2005.

D. Laupsien, A. Cockx, and A. Line, Bubble plume oscillations in viscous fluids, Chemical Engineering & Technology, 2017.

M. Raffel, C. E. Willert, F. Scarano, C. J. Kahler, S. T. Wereley et al., Particle Image Velocimetry : A Practical Guide, 2007.

Z. Liu and Y. Zheng, Piv study of bubble rising behavior, Powder Technology, vol.168, issue.1, pp.10-20, 2006.

R. C. Chen and L. S. Fan, Particle image velocimetry for characterizing the flow structure in three-dimensional gas-liquid-solid fluidized beds, Chemical Engineering Science, vol.47, issue.13, pp.3615-3622, 1992.

N. Mokhtar, A. Abas, N. Razak, M. Hamid, and L. Teong-soon, Effect of different stent configurations using lattice boltzmann method and particles image velocimetry on artery bifurcation aneurysm problem, Journal of Theoretical Biology, vol.433, 2017.

, Wikipedia contributors, Wikipedia, The Free Encyclopedia, vol.105, p.106, 2019.

S. Mirjalili, S. Jain, and M. Dodd, Interface-capturing methods for two-phase flows : An overview and recent developments, vol.12, p.107, 2017.

J. Roenby, H. Bredmose, and H. Jasak, A computational method for sharp interface advection, Royal Society Open Science, vol.3, issue.11, p.116, 2016.

H. Scheufler and J. Roenby, Accurate and efficient surface reconstruction from volume fraction data on general meshes, Journal of Computational Physics, vol.383, p.115, 2019.

F. Theron, N. L. Sauze, and A. Ricard, Turbulent liquid-liquid dispersion in sulzer smx mixer, Industrial Engineering Chemistry Research, vol.49, issue.2, p.54, 2010.

D. M. Hobbs and F. J. Muzzio, Optimization of a static mixer using dynamical systems techniques, Chemical Engineering Science, vol.53, issue.18, pp.3199-3213, 1998.

O. Byrde and M. Sawley, Optimization of a kenics static mixer for non-creeping flow conditions, Chemical Engineering Journal, vol.72, issue.2, pp.163-169, 1999.

C. U. Ugwu, J. C. Ogbonna, and H. Tanaka, Improvement of mass transfer characteristics and productivities of inclined tubular photobioreactors by installation of internal static mixers, Applied microbiology and biotechnology, vol.58, issue.5, pp.600-607, 2002.

M. Regner, K. Ostergren, and C. Tragardh, Effects of geometry and flow rate on sec ry flow and the mixing process in static mixers : a numerical study, Chemical Engineering Science, vol.61, issue.18, pp.2-16, 2006.

V. Engel, J. Stichlmeir, and W. Geipel, Fluid dynamics of packings for gas-liquid contactors, Chemical Engineering & Technology -CHEM ENG TECHNOL, vol.24, pp.459-462, 2001.

G. Wild, S. Poncin, H. Li, and E. Olmos, Some aspects of the hydrodynamics of bubble columns, International Journal of Chemical Reactor Engineering -INT J CHEM REACT ENG, vol.1, p.3, 2003.

S. J. Luo, W. Fei, X. Y. Song, and H. Li, Effect of channel opening angle on the performance of structured packings, Chemical Engineering Journal, vol.144, pp.227-234, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00380008

E. Delnoij, J. Kuipers, W. Van-swaaij, and J. Westerweel, Measurement of gas-liquid two-phase flow in bubble columns using ensemble correlation piv, Chemical Engineering Science, vol.55, issue.17, p.3, 2000.

T. Boëdec and S. Simoëns, Instantaneous and simultaneous planar velocity field measurements of two phases for turbulent mixing of high pressure sprays, Experiments in Fluids, vol.31, issue.5, pp.506-518, 2001.

C. Boyer, A. Duquenne, and G. Wild, Measuring techniques in gas-liquid and gasliquid-solid reactors, Chemical Engineering Science, vol.57, issue.16, p.3, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01394969

J. Aubin, N. Sauze, J. Bertrand, D. Fletcher, and C. Xuereb, Piv measurements of flow in an aerated tank stirred by a down-and an up-pumpxxing axial flow impeller, Experimental Thermal and Fluid Science, vol.28, 2004.

A. Zaruba, E. Krepper, H. Prasser, B. N. Reddy, and . Vanga, Experimental study on bubble motion in a rectangular bubble column using high-speed video observations, Flow Measurement and Instrumentation, vol.16, issue.5, pp.3-46, 2005.

J. Aubin, M. Ferrando, and V. Jiricny, Current methods for characterising mixing and flow in microchannels, Chemical Engineering Science, vol.65, issue.6, pp.2065-2093, 2010.

P. Sobieszuk, J. Aubin, and R. Pohorecki, Hydrodynamics and mass transfer in gasliquid flows in microreactors, Chemical Engineering & Technology, vol.35, issue.8, p.3, 2012.

M. Sathe, J. Joshi, and G. Evans, Characterization of turbulence in rectangular bubble column, Chemical Engineering Science, vol.100, pp.3-46, 2013.

A. A. Ayati, J. Kolaas, A. Jensen, and G. W. Johnson, Combined simultaneous twophase piv and interface elevation measurements in stratified gas/liquid pipe flow, International Journal of Multiphase Flow, vol.74, p.3, 2015.

D. Green, Perry's Chemical Engineers' Handbook, pp.6-7, 2007.

D. Gerlach, N. Alleborn, V. Buwa, and F. Durst, Numerical simulation of periodic bubble formation at a submerged orifice with constant gas flow rate, Chemical Engineering Science, vol.62, issue.7, pp.2109-2125, 2007.

R. Bird, W. Stewart, and E. Lightfoot, , p.9, 2002.

C. Marculescu, B. Tincu, A. Avram, T. Burinaru, and M. Avram, Computational prediction of capillary number impact on droplets formation in microchannels, Energy Procedia, vol.85, pp.10-11, 2016.

Y. T. Shah, S. P. Kelkar, B. G. Godbole, and W. D. Deckwer, Design parameters estimations for bubble column reactors, AlChE journal, vol.28, p.12, 1982.

N. Kantarci, F. Borak, and K. Ulgen, Bubble column reactors, Process Biochemistry, vol.40, pp.12-13, 2005.

L. T. Fan, H. H. Hsu, and K. B. Wang, Mass transfer coefficient and pressure drop data of two-phase oxygen-water flow in buble column packed with static mixers, Journal of Chemical and Engineering Data -J CHEM ENG DATA, vol.20, p.12, 1975.

B. Bhatia, K. Nigam, D. Auban, and G. Hébrard, Effect of a new high porosity packing on hydrodynamics and mass transfer in bubble columns, Chemical Engineering and Processing : Process Intensification, vol.43, p.12, 2004.

K. Onda, H. Takeuchi, and O. Y. , Mass transfer coefficients between gas and liquid phases in packed columns, Journal of Chemical Engineering of Japan, p.12, 1968.

S. Goto and J. M. Smith, Trickle-bed reactor performance. part i. holdup and mass transfer effects, AIChE Journal, vol.21, p.12, 1975.

J. Charpentier, Recent progress in two phase gas-liquid mass transfer in packed beds, The Chemical Engineering Journal, vol.11, issue.3, p.12, 1976.

K. Wang and L. Fan, Mass transfer in bubble columns packed with motionless mixers, Chemical Engineering Science, vol.33, issue.7, p.12, 1978.

C. L. Hyndman, F. Larachi, and C. Guy, Understanding gas-phase hydrodynamics in bubble columns : a convective model based on kinetic theory, Chemical Engineering Science, vol.52, issue.1, pp.63-77, 1997.

B. Thorat and J. Joshi, Experimental Thermal and Fluid Science, vol.28, p.13, 2004.

T. Abadie, J. Aubin, D. Legendre, and C. Xuereb, Hydrodynamics of gas-liquid taylor flow in rectangular microchannels, Microfluidics and Nanofluidics, vol.12, p.13, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00878398

X. Luo, D. J. Lee, R. B. Lau, G. Yang, and L. Fan, Maximum stable bubble size and gas holdup in high-pressure slurry bubble columns, Fluid Mechanics and Transport Phenomenon, vol.45, p.13, 1999.

H. Hikita, S. Asai, K. Tanigawa, K. Segawa, and M. Kitao, Gas hold-up in bubble columns, The Chemical Engineering Journal, vol.20, issue.1, p.14, 1980.

A. Ghanem, T. Lemenand, D. D. Valle, and H. Peerhossaini, Static mixers : Mechanisms, applications, and characterization methods -a review, Chemical Engineering Research and Design, vol.92, issue.2, p.15, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01390619

T. Park, Y. Sung, T. Kim, I. Lee, G. Choi et al., Effect of static mixer geometry on flow mixing and pressure drop in marine scr applications, International Journal of Naval Architecture and Ocean Engineering, vol.6, issue.1, p.16, 2014.

V. Stamilla, Gas-liquid dispersion by static mixers in the laminar regime : Application to the smx static mixer, p.16, 2016.

G. I. Taylor, The formation of emulsions in definable fields of flow, Proc. Roy. Soc, vol.29, p.18, 1934.

J. M. Rallison, The deformation of small viscous drops and bubbles in shear flows, Ann. Rev. Fluid Mech, vol.16, p.20, 1984.

I. Manas-zloczowe, Studies of mixing efficiency in batch and continuous mixers, Rubber Chemistry and Technology, vol.67, p.20, 1994.

D. H. Sharp, An overview of rayleigh-taylor instability, Physica D : Nonlinear Phenomena, vol.12, p.20, 1984.

J. C. Beale and R. Reitz, Modeling spray atomization with the kelvinhelmholtz/rayleigh-taylor hybrid model, Atomization and Sprays, vol.9, p.20, 1999.

M. Mutsakis, G. Schneider, and F. A. Streiff, Advances in static mixing technology, Chemical Engineering Progress, vol.82, p.22, 1986.

W. D. Mohr, R. L. Saxton, and C. H. Jepson, Mixing in laminar-flow systems, Ind. Eng. Chem, vol.49, issue.11, p.23, 1957.

M. F. Edwards, N. Harnby, and A. W. Nienow, Mixing in the process Industries : Laminar flow and distributive mixing, p.24, 1992.

L. Filippa, A. Trento, and A. M. Álvarez, Sauter mean diameter determination for the fine fraction of suspended sediments using a lisst-25x diffractometer, Measurement, vol.45, issue.3, p.26, 2012.

J. G. Daly, S. A. Patel, and D. B. Bukur, Measurement of gas holdups and sauter mean bubble diameters in bubble column reactors by dynamics gas disengagement method, Chemical Engineering Science, vol.47, issue.13, p.26, 1992.

R. Schäfer, C. Merten, and G. Eigenberger, Bubble size distributions in a bubble column reactor under industrial conditions, Experimental Thermal and Fluid Science, vol.26, issue.6, p.26, 2002.

M. Bouaifi, G. Hebrard, D. Bastoul, and M. Roustan, A comparative study of gas hold-up, bubble size, interfacial area and mass transfer coefficients in stirred gasliquid reactors and bubble columns, Chemical Engineering and Processing : Process Intensification, vol.40, issue.2, p.26, 2001.

G. M. Evans, G. J. Jameson, and B. W. Atkinson, Prediction of the bubble size generated by a plunging liquid jet bubble column, Chemical Engineering Science, vol.47, issue.13, p.26, 1992.

S. Middleman, Drop size distributions produced by turbulent pipe flow of immiscible fluids through a static mixer, Industrial Engineering Chemistry Process Design and Development, vol.13, issue.1, p.27, 1974.

A. Pacek and A. Nienow, Measurement of drop size distribution in concentrated liquidliquid dispersions : Video and capillary techniques, vol.73, p.30, 1995.

J. M. Zalc, E. S. Szalai, F. J. Muzzio, and S. Jaffer, Characterization of flow and mixing in an smx static mixer, AIChE Journal, vol.48, issue.3, p.45, 2002.

S. M. Hosseini, K. Razzaghi, and F. Shahraki, Design and characterization of a lowpressure-drop static mixer, AIChE Journal, vol.65, p.31, 2018.

H. Song and S. Han, A general correlation for pressure drop in a kenics static mixer, Chemical Engineering Science, vol.60, p.31, 2005.

V. Kumar, V. Shirke, and K. Nigam, Performance of kenics static mixer over a wide range of reynolds number, Chemical Engineering Journal -CHEM ENG J, vol.139, p.43, 2008.

P. Moracancias, H. Khaled, G. Carnelle, and J. Legrand, Friction factor in static mixer and determination of geometric parameters of smx sulzer mixers, Chemical Enginnering Communications, vol.171, p.31, 1999.

M. K. Singh, P. D. Anderson, and H. E. Meijer, Understanding and optimizing the smx static mixer, Macromolecular rapid communications, vol.30, issue.4-5, pp.31-54, 2009.

N. Shah and D. Kale, Pressure drop for laminar flow of non-newtonian fluids in static mixers, Chemical Engineering Science, vol.46, issue.8, p.32, 1991.

F. Streiff, S. Jaffer, and G. Schneider, The design and application of static mixer technology, Society of Chemical Engineers, issue.1, p.32, 1999.

C. M. Madhuranthakam, Q. Pan, and G. L. Rempel, Residence time distribution and liquid holdup in kenics kmx static mixer with hydrogenated nitrile butadiene rubber solution and hydrogen gas system, Chemical Engineering Science, vol.64, issue.14, p.37, 2009.

B. Gourich, C. Vial, N. E. Azher, M. Belhaj, M. Soulami et al., Biochemical Engineering Journal, vol.39, issue.1, p.37, 2008.

A. Lakota, M. Jazbec, and J. Levec, Impact of structured packing on bubble column mass transfer characteristics. part 2. analysis of gas-liquid mass transfer measurements, Acta Chim. Slov, vol.49, p.38, 2002.

A. Martin, S. Camy, and J. Aubin, Hydrodynamics of co 2 -ethanol flow in a microchannel under elevated pressure, Chemical Engineering Science, vol.178, p.46, 2017.

M. J. Harleman, R. Delfos, T. Terwisga, J. J-c-van, and . Westerweel, Dispersion of bubbles in fully developed channel flow, Journal of Physics : Conference Series, vol.318, issue.5, p.46, 2011.

S. Li, Y. Ma, S. Jiang, T. Fu, C. Zhu et al., The drag coefficient and the shape for a single bubble rising in non-newtonian fluids, Journal of Fluids Engineering, vol.134, p.46, 2012.
URL : https://hal.archives-ouvertes.fr/hal-02050329

A. M. Leitch and W. D. Baines, Liquid volume flux in a weak bubble plume, Journal of Fluid Mechanics, vol.205, issue.1, p.46, 1989.

V. Strubel, S. Simoëns, P. Vergne, N. Fillot, F. Ville et al., Fluorescence tracking and µ-piv of individual particles and lubricant flow in and around lubricated point contacts, Tribology Letters, vol.65, issue.3, p.69, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01523895

C. Senatore, M. Wulfmeier, I. Vlahinc, J. Andrade, and K. Iagnemma, Design and implementation of a particle image velocimetry method for analysis of running gearsoil interaction, Journal of Terramechanics, vol.50, issue.5-6, p.47, 2013.

R. Lindken and W. Merzkirch, A novel piv technique for measurements in multiphase flows and its application to two-phase bubbly flows, Experiments in Fluids, vol.33, issue.6, p.49, 2002.

L. Gui, J. Longo, and F. Stern, Towing tank piv measurement system, data and uncertainty assessment for dtmb model 5512, Experiments in Fluids, vol.31, issue.3, p.49, 2001.

B. B. Amira, D. Zied, and M. Salah-abid, Piv study of the turbulent flow in a stirred vessel equipped by an eight concave blades turbine, Fluid Mechanics, vol.1, issue.2, p.49, 2015.

J. Chen, A. Kemoun, M. H. Al-dahhan, M. P. Dudukovi?, D. J. Lee et al., Comparative hydrodynamics study in a bubble column using computer-automated radioactive particle tracking (carpt)/computed tomography (ct) and particle image velocimetry (piv), Chemical Engineering Science, vol.54, p.49, 1999.

S. Liu, A. N. Hrymak, and P. E. Wood, Design modifications to smx static mixer for improving mixing, AIChE Journal, vol.52, issue.1, p.54, 2006.

G. S. Settles and E. Covert, Schlieren and Shadowgraph Techniques : Visualizing Phenomena in Transport Media, vol.55, p.59, 2002.

A. Buffo and V. Alopaeus, Experimental determination of size distributions : Analyzing proper sample sizes, Measurement Science and Technology, vol.27, issue.4, p.61, 2016.

H. , Volume, shape, and roundness of quartz particles, The Journal of Geology, vol.43, issue.3, p.62, 1935.

T. Brox, A. Bruhn, N. Papenberg, and J. Weickert, High accuracy optical flow estimation based on a theory for warping, Proceedings of the European Conference on Computer Vision (ECCV), vol.3024, p.63, 2004.

J. Link, C. Zeilstra, N. Deen, and H. Kuipers, Validation of a discrete particle model in a 2d spout fluid bed using non intrusive optical measuring techniques, The Canadian Journal of Chemical Engineering, vol.82, p.65, 2008.

D. Funfschilling and H. Z. Li, Flow of non-newtonian fluids around bubbles : Piv measurements and birefringence visualisation, Chemical Engineering Science, vol.56, issue.3, p.96, 2001.

M. Raffel, C. Willert, and J. Kompenhans, Particle Image Velocimetry : A Practical Guide, p.66, 1998.

G. Stokes, On the effect of internal friction of fluids on the motion of pendulums, Trans Camb Philos Soc, vol.9, p.70

S. P. Godbole, A. Schumpe, Y. T. , and N. L. Carr, Hydrodynamics and mass transfer in nonnewtonian solutions in a bubble column, AlChe Journal, vol.30, p.74, 1984.

J. Dudley, Mass transfer in bubble columns : A comparison of correlations, Water Research, vol.29, pp.1129-1138, 1995.

H. Chaumat, A. M. Billet, F. Augier, C. Mathieu, and H. Delmas, Mass transfer in bubble column for industrial conditions effects of organic medium, gas and liquid flow rates and column design, Chemical Engineering Science, vol.60, p.74, 2005.

H. Dhaouadi, S. Poncin, J. Hornut, and N. Midoux, Gas-liquid mass transfer in bubble column reactor : Analytical solution and experimental confirmation, Chemical Engineering and Processing : Process Intensification, vol.47, p.74, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00301190

D. Pinelli, L. Z. , and F. Magelli, Analysis of kla measurement methods in stirred vessels : The role of experimental techniques and fluid dynamic models, International Journal of Chemical Reactor Engineering, vol.8, 2010.

P. Kovats, D. Thevenin, and K. Zahringer, Characterizing fluid dynamics in a bubble column aimed for the determination of reactive mass transfer, p.74, 2017.

A. L. Marquez, G. Wild, and N. Midoux, A review of recent chemical techniques for the determination of the volumetric mass-transfer coefficient kla in gas-liquid reactors, Chemical Engineering and Processing : Process Intensification, vol.33, p.76, 1994.

G. Grund, A. Schumpe, and W. Deckwer, Gas-liquid mass transfer in a bubble column with organic liquids, Chemical Engineering Science, vol.47, issue.13, p.77, 1992.

P. Lage and R. O. Espósito, Experimental determination of bubble size distributions in bubble columns : prediction of mean bubble diameter and gas hold up, Powder Technology, vol.101, p.77, 1999.

N. A. Kazakis, A. A. Mouza, and S. V. Paras, Experimental study of bubble formation at metal porous spargers : Effect of liquid properties and sparger characteristics on the initial bubble size distribution, Chemical Engineering Journal, vol.137, issue.2, p.77, 2008.

P. G. Saffman, On the rise of small air bubbles in water, Journal of Fluid Mechanics, vol.1, issue.3, p.86, 1956.

G. Mougin and J. Magnaudet, Path instability of a rising bubble, Physical Review Letters, vol.88, issue.1, p.85, 2001.

M. K. Tripathi, K. C. Sahu, and R. Govindarajan, Dynamics of an initially spherical bubble rising in quiescent liquid, Nature communications, vol.6, p.85, 2015.

T. Z. Harmathy, Velocity of large drops and bubbles in media of infinite or restricted extent, AIChE Journal, vol.6, issue.2, p.85, 1960.

H. D. Mendelson, The prediction of bubble terminal velocities from wave theory, AIChE Journal, vol.13, p.85, 1967.

G. B. Wallis, The terminal speed of single drops or bubbles in an infinite medium, International Journal of Multiphase Flow, vol.1, issue.4, p.85, 1974.

A. Tomiyama, I. Kataoka, I. Zun, and T. Sakaguchi, Drag coefficients of single bubbles under normal and micro gravity conditions, JSME International Journal Series B, vol.41, p.85, 1998.

J. Raymond and J. Rosant, A numerical and experimental study of the terminal velocity and shape of bubbles in viscous liquids, Chemical Engineering Science, vol.55, issue.5, p.85, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00699408

A. Tomiyama, Single bubbles in stagnant liquids and in linear shear flows, Workshop on Measurement Technology (MTWS5), p.85, 2002.

A. Tomiyama, G. P. Celata, S. Hosokawa, and S. Yoshida, Terminal velocity of single bubbles in surface tension force dominant regime, International Journal of Multiphase Flow, vol.28, issue.9, p.85, 2002.

R. Clift, J. R. Grace, and M. E. Weber, Bubbles, drop and particles, p.86, 1978.

K. Lunde and R. J. Perkins, Shape oscillations of rising bubbles, Fascination of Fluid Dynamics : A Symposium in Honour of Leen van, p.86, 1998.

O. Wiki, This Wiki collects information about the OpenSource CFD toolbox OpenFOAM and provides a platform for collaborations, Unofficial OpenFOAM wiki, p.115

D. Marchisio and R. Fox, Computational Models for Polydisperse Particulate and Multiphase Systems, p.107, 2013.

D. Pfleger, S. Gomes, N. Gilbert, and H. Wagner, Hydrodynamic simulations of laboratory scale bubble columns fundamental studies of the eulerian-eulerian modelling approach, Chemical Engineering Science, vol.54, issue.21, p.107, 1999.

Z. Jaworski and P. Pianko-oprych, Two-phase laminar flow simulations in a kenics static mixer : Standard eulerian and lagrangian approaches, fluid Mixing VII, vol.80, pp.910-916, 2002.

F. Kerdouss, A. Bannari, and P. Proulx, Cfd modeling of gas dispersion and bubble size in a double turbine stirred tank, Chemical Engineering Science, vol.61, issue.10, pp.3313-3322, 2006.

J. Ding, X. Wang, X. Zhou, N. Ren, and W. Guo, Cfd optimization of continuous stirred-tank (cstr) reactor for biohydrogen production, Bioresource Technology, vol.101, issue.18, p.107, 2010.

L. Gemello, V. Cappello, F. Augier, D. Marchisio, and C. Plais, Cfd-based scale-up of hydrodynamics and mixing in bubble columns, Chemical Engineering Research and Design, vol.136, p.107, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01952005

M. Shiea, A. Buffo, E. Baglietto, D. Lucas, M. Vanni et al., Evaluation of hydrodynamic closures for bubbly regime cfd simulations in developing pipe flow, Chemical Engineering Technology, p.107, 2019.

T. Wang and J. Wang, Numerical simulations of gas-liquid mass transfer in bubble columns with a cfd-pbm coupled model, 8th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering, vol.62, pp.7107-7118, 2007.

M. Bhole, J. Joshi, and D. Ramkrishna, Cfd simulation of bubble columns incorporating population balance modeling, Chemical Engineering Science, vol.63, issue.8, pp.2267-2282, 2008.

M. Petitti, A. Nasuti, D. Marchisio, M. Vanni, G. Baldi et al., Bubble size distribution modeling in stirred gas-liquid reactors with qmom augmented by a new correction algorithm, AIChE Journal, vol.56, p.107, 2009.

D. Li, A. Buffo, W. Podgórska, Z. Gao, and D. Marchisio, Droplet breakage and coalescence in liquid-liquid dispersions : Comparison of different kernels with eqmom and qmom, AIChE Journal, vol.63, p.107, 2016.

A. Buffo, M. Vanni, and D. Marchisio, Simulation of a reacting gas-liquid bubbly flow with cfd and pbm : Validation with experiments, Applied Mathematical Modelling, vol.44, p.107, 2016.

D. Li, A. Buffo, W. Podgórska, D. Marchisio, and Z. Gao, Investigation of droplet breakup in liquid-liquid dispersions by cfd -pbm simulations : The influence of the surfactant type, Chinese Journal of Chemical Engineering, p.107, 2017.

M. Basavarajappa and S. Miskovic, Investigation of gas dispersion characteristics in stirred tank and flotation cell using a corrected cfd-pbm quadraturebased moment method approach, Minerals Engineering, vol.95, pp.161-184, 2016.

V. Buwa, D. Deo, and V. Ranade, Eulerian-lagrangian simulations of unsteady gas-liquid flows in bubble columns, International Journal of Multiphase Flow, vol.32, p.107, 2006.

T. Shao, Y. Hu, W. Wang, Y. Jin, and Y. Cheng, Simulation of solid suspension in a stirred tank using cfd-dem coupled approach, Chinese Journal of Chemical Engineering, vol.21, issue.10, p.107, 2013.

D. Kafui, S. Johnson, C. Thornton, and J. Seville, Parallelization of a lagrangian-eulerian dem/cfd code for application to fluidized beds, Powder Technology, vol.207, issue.1, pp.270-278, 2011.

G. Boccardo, F. Augier, Y. Haroun, D. Ferre, and D. Marchisio, Validation of a novel open-source work-flow for the simulation of packed-bed reactors, Chemical Engineering Journal, vol.279, p.107, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01208253

L. Pezo, M. Pezo, A. Jovanovic, N. Kosani?, A. Petrovic et al., Granular flow in static mixers by coupled dem/cfd approach, Hemijska industrija, vol.70, p.107, 2015.

V. Bhusare, M. Dhiman, D. Kalaga, S. Roy, and J. Joshi, Cfd simulations of a bubble column with and without internals by using openfoam, Chemical Engineering Journal, vol.317, p.107

C. Hirt and B. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries, J. Comp. Phys, vol.39, issue.1, p.107, 1981.

A. Bourlioux, A coupled level-set volume-of-fluid algorithm for tracking material interfaces, International symposium on Computational Fluid Dynamics, vol.4, issue.1, pp.107-108, 1995.

H. G. Weller, A new approach to vof-based interface capturing methods for incompressible and compressible flow, p.110, 2008.

G. Cottet and E. Maitre, A semi-implicit level set method for multiphase flows and fluid-structure interaction problems, Journal of Computational Physics, vol.314, pp.107-108, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01188443

S. Osher and J. A. Sethian, Fronts propagating with curvature-dependent speed : Algorithms based on Hamilton-Jacobi formulations, J. Comp. Phys, vol.79, issue.1, pp.107-108, 1988.

B. A. Nichita, I. Zun, and J. R. Thome, A level set method coupled with a volume of fluid method for modeling of gas-liquid interface in bubbly flow, Journal of Fluids Engineering, vol.132, issue.8, pp.107-108, 2010.

H. Takahira, T. Horiuchi, and S. Banerjee, An improved three-dimensional level set method for gas-liquid two-phase flows, Journal of Fluids Engineering, vol.126, issue.4, pp.578-585, 2004.

I. Chakraborty, G. Biswas, and P. Ghoshdastidar, A coupled level-set and volume-offluid method for the buoyant rise of gas bubbles in liquids, International Journal of Heat and Mass Transfer, vol.58, issue.1, pp.240-259, 2013.

M. Sussman and E. G. Puckett, A coupled level set and volume-of-fluid method for computing 3d and axisymmetric incompressible two-phase flows, Journal of Computational Physics, vol.162, issue.2, pp.301-337, 2000.

G. Son and N. Hur, A coupled level set and volume-of-fluid method for the buoyancydriven motion of fluid particles, Numerical Heat Transfer, vol.42, issue.6, p.108, 2002.

J. Brackbill, D. Kothe, and C. Zemach, A continuum method for modeling surface tension, Journal of Computational Physics, vol.100, issue.2, p.117, 1992.

C. Hirt and B. Nichols, Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, vol.39, issue.1, p.109, 1981.

S. Afkhami and Y. Renardy, A volume-of-fluid formulation for the study of co-flowing fluids governed by the hele-shaw equations, Physics of Fluids, vol.25, issue.8, p.110, 2013.

M. Wörner, Numerical modeling of multiphase flows in microfluidics and micro process engineering : a review of methods and applications, Microfluidics and Nanofluidics, vol.12, issue.6, p.110, 2012.

D. Suraj, A. Lakshman, and T. Mario, Evaluating the performance of the two-phase flow solver interfoam, Comp. Sc. & Discovery, vol.5, issue.1, p.115, 2012.

H. Marschall, K. Hinterberger, C. Schüler, F. Habla, and O. Hinrichsen, Numerical simulation of species transfer across fluid interfaces in free-surface flows using openfoam, Ch. Eng. Sc, vol.78, p.111, 2012.

A. Q. Raeini, M. J. Blunt, and B. Bijeljic, Modelling two-phase flow in porous media at the pore scale using the volume-of-fluid method, J. Comp. Phys, vol.231, issue.17, p.111, 2012.

D. A. Hoang, V. Van-steijn, L. M. Portela, M. T. Kreutzer, and C. R. Kleijn, Benchmark numerical simulations of segmented two-phase flows in microchannels using the volume of fluid method, Computers & Fluids, vol.86, p.111, 2013.

C. Bilger, M. Aboukhedr, K. Vogiatzaki, and R. Cant, Evaluation of two-phase flow solvers using level set and volume of fluid methods, J. Comp. Phys, vol.345, p.111, 2017.

J. Roenby, B. E. Larsen, H. Bredmose, and H. Jasak, A new Volume-of-Fluid method in OpenFOAM, VII International Conference on Computational Methods in Marine Engineering, p.111, 2017.

J. Roenby, H. Bredmose, and H. Jasak, Isoadvector : Geometric vof on general meshes, p.111, 2018.

W. F. Noh and P. Woodward, Slic : Simple line interface calculation, Proceedings of the Fifth International Conference on Numerical Methods in Fluid Dynamics, pp.330-340, 1976.

R. Debar, Fundamentals of the kraken code, California Univ

F. Xiao, Y. Honma, and T. Kono, A simple algebraic interface capturing scheme using hyperbolic tangent function, International Journal for Numerical Methods in Fluids, vol.48, issue.9, p.111, 2005.

K. Yokoi, Efficient implementation of THINC scheme : A simple and practical smoothed VOF algorithm, Journal of Computational Physics, vol.226, issue.2, p.111, 1985.

J. E. Pilliod, An analysis of piecewise linear interface reconstruction algorithms for volume-of-fluid methods, p.111, 1992.

J. E. Pilliod and E. G. Puckett, Second-order accurate volume-of-fluid algorithms for tracking material interfaces, Journal of Computational Physics, vol.199, issue.2, p.111, 2004.

S. J. Cummins, M. M. Francois, and D. B. Kothe, Estimating curvature from volume fractions, frontier of Multi-Phase Flow Analysis and Fluid-Structure, vol.83, pp.425-434, 2005.

D. Sun and W. Tao, A coupled volume-of-fluid and level set (voset) method for computing incompressible two-phase flows, International Journal of Heat and Mass Transfer, vol.53, issue.4, pp.645-655, 2010.

R. F. Engberg and E. Y. Kenig, Numerical simulation of rising droplets in liquidliquid systems : A comparison of continuous and sharp interfacial force models, International Journal of Heat and Fluid Flow, vol.50, p.115, 2014.

C. Wang and A. K. Mitra, Estimates of surface normal and curvature, reconstruction of continuum surface force model, and elimination of spurious currents, International Journal for Numerical Methods in Fluids, vol.75, p.115, 2014.

B. Lafaurie, C. Nardone, R. Scardovelli, S. Zaleski, and G. Zanetti, Modelling merging and fragmentation in multiphase flows with surfer, Journal of Computational Physics, vol.113, issue.1, p.115, 1994.

X. Liu, R. P. Fedkiw, and M. Kang, A boundary condition capturing method for poisson's equation on irregular domains, Journal of Computational Physics, vol.160, issue.1, p.115, 2000.

M. Kang, R. P. Fedkiw, and X. Liu, A boundary condition capturing method for multiphase incompressible flow, Journal of Scientific Computing, vol.15, issue.3, p.115, 2000.

L. Chen, J. Zang, A. Hillis, G. Morgan, and A. Plummer, Numerical investigation of wave-structure interaction using openfoam, Ocean Engineering, vol.88, pp.91-109, 2014.

P. Schmitt and B. Elsaesser, On the use of openfoam to model oscillating wave surge converters, Ocean Engineering, vol.108, pp.98-104, 2015.

Z. Z. Hu, D. Greaves, and A. Raby, Numerical wave tank study of extreme waves and wave-structure interaction using openfoam, Ocean Engineering, vol.126, pp.329-342, 2016.

B. Lalanne, L. R. Villegas, S. Tanguy, and F. Risso, On the computation of viscous terms for incompressible two-phase flows with level set/ghost fluid method, Journal of Computational Physics, vol.301, pp.289-307, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01308135

H. Deconinck and E. Dick, Computational fluid dynamics, Proceedings of the fourth international conference on computational fluid dynamics, p.116, 2006.

F. Denner and B. G. Van-wachem, Numerical time-step restrictions as a result of capillary waves, Journal of Computational Physics, vol.285, pp.116-117, 2015.

C. Galusinski and P. Vigneaux, On stability condition for bifluid flows with surface tension : Application to microfluidics, Journal of Computational Physics, vol.227, issue.12, p.117, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00274569

L. Gamet, M. Scala, J. Roenby, H. Scheufler, and J. Pierson, On 2d validation of volume-of-fluid openfoam isoadvector solvers using single bubble benchmark," submitted to Computers and Fluids, p.121, 2019.

S. Hysing, S. Turek, D. Kuzmin, N. Parolini, E. Burman et al., Quantitative benchmark computations of two-dimensional bubble dynamics, I.J.N.M.F, vol.60, issue.11, pp.1259-1288, 2009.

J. Adelsberger, P. Esser, M. Griebel, S. Groß, M. Klitz et al., 3D incompressible two-phase flow benchmark computations for rising droplets, 2014, proceedings of the 11th World Congress on Computational Mechanics (WCCM XI), vol.122, p.138

W. Dijkhuizen, E. Van-den-hengel, N. Deen, M. Van-sint-annaland, and J. Kuipers, Numerical investigation of closures for interface forces acting on single air-bubbles in water using volume of fluid and front tracking models, Chemical Engineering Science, vol.60, issue.22, p.121, 2005.

C. K. Svihla and H. Xu, Simulation of free surface flows with surface tension with ansys cfx, 2006 International ANSYS Conference, p.121, 2006.

J. Hua, J. F. Stene, and P. Lin, Numerical simulation of 3d bubbles rising in viscous liquids using a front tracking method, Journal of Computational Physics, vol.227, issue.6, p.121, 2008.

L. Amaya-bower and T. Lee, Single bubble rising dynamics for moderate reynolds number using lattice boltzmann method, Computers & Fluids, vol.39, issue.7, pp.121-132, 2010.

B. Andersson, R. Andersson, L. Håkansson, M. Mortensen, R. Sudiyo et al., Computational fluid dynamics for engineers, p.121, 2011.

A. M. Thomas, J. Fang, J. Feng, and I. A. Bolotnov, Estimation of shear-induced lift force in laminar and turbulent flows, Nuclear Technology, vol.190, issue.3, p.121, 2015.

H. Badreddine, Y. Sato, B. Niceno, and H. Prasser, Finite size lagrangian particle tracking approach to simulate dispersed bubbly flows, Chemical Engineering Science, vol.122, p.121, 2015.

S. Popinet and S. Zaleski, A front-tracking algorithm for accurate representation of surface tension, International Journal for Numerical Methods in Fluids, vol.30, issue.6, p.133, 1999.
URL : https://hal.archives-ouvertes.fr/hal-01445441

M. Herrmann, A balanced force refined level set grid method for two-phase flows on unstructured flow solver grids, Journal of Computational Physics, vol.227, issue.4, p.133, 2008.

A. Albadawi, D. Donoghue, A. Robinson, D. Murray, and Y. Delauré, Influence of surface tension implementation in volume of fluid and coupled volume of fluid with level set methods for bubble growth and detachment, International Journal of Multiphase Flow, vol.53, p.133, 2013.

T. Abadie, J. Aubin, and D. Legendre, On the combined effects of surface tension force calculation and interface advection on spurious currents within volume of fluid and level set frameworks, Journal of Computational Physics, vol.297, p.133, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01347169

Y. Li, J. Zhang, and L. Fan, Numerical simulation of gas-liquid-solid fluidization systems using a combined cfd-vof-dpm method : bubble wake behavior, Chemical Engineering Science, vol.54, issue.21, pp.5101-5107, 1999.

S. Jeon, S. Kim, and G. Park, Cfd simulation of condensing vapor bubble using vof model, World Acad. Sci, vol.60, p.149, 2009.

Y. Alhendal and A. Turan, Volume-of-fluid (vof) simulations of marangoni bubbles motion in zero gravity, p.149, 2012.

V. Ranade, M. Perrard, N. L. Sauze, C. Xuereb, and J. Bertrand, Trailing vortices of rushton turbine : Piv measurements and cfd simulations with snapshot approach, Chemical Engineering Research and Design, vol.79, issue.1, pp.3-12, 2001.

A. Khopkar, J. Aubin, C. Xuereb, N. Sauze, J. Bertrand et al., Gas-liquid flow generated by a pitched-blade turbine : Particle image velocimetry measurements and computational fluid dynamics simulations, Industrial Engineering Chemistry Research, vol.42, p.154, 2003.

A. Khopkar, J. Aubin, C. Rubio-atoche, C. Xuereb, N. Sauze et al., Flow generated by radial flow impellers : Piv measurements and cfd simulations, Int. J. Chem. React. Eng, vol.2, p.154, 2004.

G. Silva, N. Leal, and V. Semiao, Micro-piv and cfd characterization of flows in a microchannel : Velocity profiles, surface roughness and poiseuille numbers, International Journal of Heat and Fluid Flow, vol.29, issue.4, p.154, 2008.

J. Feng, F. K. Benra, and H. J. Dohmen, Unsteady flow visualization at part-load conditions of a radial diffuser pump : by piv and cfd, Journal of Visualization, vol.12, issue.1, p.154, 2009.

F. Mendoza, A. L. Banales, E. Cid, C. Xuereb, M. Poux et al., Hydrodynamics in a stirred tank in the transitional flow regime, vol.132, pp.865-880, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01982666