E. Aeby-gautier, F. Bruneseaux, J. D. Teixeira, B. Appolaire, G. Geandier et al., Microstructural formation in Ti alloys : In-situ characterization of phase transformation kinetics, JOM, vol.59, issue.1, pp.54-58, 2007.

E. Aeby-gautier, B. Denand, J. Teixeira, M. Dehmas, B. Appolaire et al., Influence of microstructure on tensile properties of ?-metastable Ti 17 alloy, Ti 2011 of the 12th World Conference on Titanium. Pékin, Chine, 2011.

J. Agren, Y. Bréchet, C. Hutchinson, and G. Purdy, Thermodynamics and Phase Transformations : The selected works of Mats Hillert, 2006.

J. Agren and G. Vassilev, Computer simulations of cementite dissolution in austenite, Materials Science and Engineering, vol.64, pp.95-103, 1984.

C. Angelier, S. Bein, and J. Béchet, Building a continuous cooling transformation diagram of ?-cez alloy by metallography and electrical resistivity measurements, Metallurgical and Materials Transactions A, vol.28, issue.12, pp.2467-2475, 1997.

B. Appolaire, E. Aeby-gautier, M. Dehmas, A. Settefrati, M. Cottura et al., Modeling of phase transformations in beta-metastable Ti alloys, Proceedings of the 13th World Conference on Titanium, 2015.

B. Appolaire, L. Hericher, and E. Gautier, Modelling of phase transformation kinetics in Ti alloys -Isothermal treatments, Acta Materialia, vol.53, pp.3001-3011, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00163441

&. Aubert and . Duval, Fiche technique T40 Aubert et Duval, titane pur, 2018.

M. Avrami, Kinetics of phase change. II. Transformation-time relations for random distribution of nuclei, Journal of Chemical Physics, vol.8, pp.212-224, 1939.

S. Banerjee and P. Mukhopadhyay, Phase transformations : Examples from titanium and zirconium alloys, 2010.

J. Bechet, Decomposition of the beta-phase in titanium alloy Ti-17, Titanium Science and Technonology : proceedings of the 5th International Conference on Titanium, 1985.

R. Becker and W. Doring, Kinetische behandlung der keimbildung in übersättigten dämpfen, Annalen der Physik, vol.416, issue.8, pp.719-752, 1935.

S. Bein, Transformations de phases dans les alliages de titane ? + ? quasi ? : approches comparatives des évolutions morphologiques et des mécanismes de transformation observés dans l'alliage ?-cez, 1996.

S. Bein and J. Bechet, Phase transformation kinetics and mechanisms in titanium alloys Ti-6246, ?-CEZ and Ti-1023, Journal de Physique IV France, vol.6, pp.99-108, 1996.
URL : https://hal.archives-ouvertes.fr/jpa-00254142

D. Bhattacharyya, G. B. Viswanathan, R. Denkenberger, D. Furrer, and H. L. Fraser, The role of crystallographic and geometrical relationships between and phases in an / titanium alloy, Acta Materialia, vol.51, issue.16, pp.4679-4691, 2003.

W. P. Bosze and R. Trivedi, On the kinetic expression for the growth of precipitate plates, Metallurgical Transactions, vol.5, pp.511-512, 1974.

X. Boulnat, M. Perez, D. Fabrègue, S. Cazottes, and Y. De-carlan, Characterization and modeling of oxides precipitation in ferritic steels during fast non-isothermal consolidation, Acta Materialia, vol.107, pp.390-403, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01540077

J. P. Bourne, C. Atkinson, and R. C. Reed, Diffusion-controlled growth in ternary systems, Metallurgical and Materials Transactions A, vol.25, issue.12, pp.2683-2694, 1994.

A. Boyne, D. Wang, R. P. Shi, Y. Zheng, A. Behera et al., Pseudospinodal mechanism for fine ?/? microstructures in ?-Ti alloys, Acta Materialia, vol.64, pp.188-197, 2014.

F. Bruneseaux, Apport de la diffraction des rayons X à haute énergie sur les transformations de phases, application aux alliages de titanes, 2008.

F. Bruneseaux, E. Aeby-gautier, G. Geandier, J. Da-costa-teixeira, B. Appolaire et al., situ phase transformations kinetics characterizations by electrical resistivity and high temperature synchrotron X-ray diffraction in the Ti17 titanium alloy, vol.476, pp.60-68, 2008.

W. G. Burgers, On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium, Physica, vol.1, issue.7, pp.561-586, 1934.

R. Castro and L. Seraphin, Contribution à l'étude métallographique et structurale de l'alliage de titane TA6V, Mémoires Scientifiques de la Revue de Métallurgie, vol.63, pp.1025-1058, 1966.

H. Chang, E. Aeby-gautier, and L. Zhou, Phase transformation kinetics in metastable titanium alloys, Chinese Science Bulletin, vol.59, p.1773, 2014.

G. Charrier, M. Dehmas, M. Descoins, D. Mangelinck, E. Aeby-gautier et al., Study of the elemental partitioning for different transformation conditions in the Ti-5553 alloy, Proceedings of the 13th World Conference on Titanium, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01521863

J. W. Christian, The theory of transformations in metals and alloys, Materials Today, vol.6, issue.3, p.53, 2003.

D. Coates, Diffusion-controlled precipitate growth in ternary systems I, Metallurgical Transactions B, vol.3, issue.5, pp.1203-1212, 1972.

Y. Combres, Traitements thermiques des alliages de titane. Techniques de l'Ingénieur, 2013.

M. Cottura, B. Appolaire, A. Finel, and Y. Le-bouar, Phase field study of acicular growth : Role of elasticity in Widmanstätten structure, Acta Materialia, vol.72, pp.200-210, 2014.

J. Da-costa-teixeira, Études expérimentales et modélisation des évolutions microstructurales au cours des traitements thermiques post forgeage dans l'alliage de titane Ti17, 2005.

J. Da-costa-teixeira, B. Appolaire, E. Aeby-gautier, S. Denis, G. Cailletaud et al., Transformation kinetics and microstructures of Ti17 titanium alloy during continuous cooling, Materials Science and Engineering : A, vol.448, issue.1, pp.135-145, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00134489

J. Da-costa-teixeira, B. Appolaire, E. Aeby-gautier, S. Denis, and L. Héricher, Modeling of the phase transformations in near-titanium alloys during the cooling after forging, Computational Materials Science, vol.42, issue.2, pp.266-280, 2008.

U. Dahmen, Orientation relationships in precipitation systems, Acta Metallurgica, vol.30, pp.63-73, 1982.

M. Debuigne, Modélisation thermomécanique des traitements de durcissement superficiel en phase solide par laser CO 2 continu : application et validation dans le cas de l'alliage de titane TI-6AL-4V, 1988.

M. Dehmas, J. Kovac, B. Appolaire, E. Aeby-gautier, B. Denand et al., ? ? ?/? isothermal phase transformation in Ti17 titanium alloy : chemical composition and crystallographic aspect. Solid State Phenomena 172-174, pp.396-401, 2011.

S. Denis, F. D. Simon, and A. , Mathematical model coupling phase transformations and temperature evolutions in steels, ISIJ International, vol.32, issue.3, pp.316-325, 1992.

P. Di-napoli, Modélisation des évolutions microstructurales par changement de phases dans les alliages de titane ?-métastables, 2010.

Q. Du, W. J. Poole, M. A. Wells, and N. C. Parson, Microstructure evolution during homogenization of Al-Mn-Fe-Si alloys : Modeling and experimental results, Acta Materialia, vol.61, issue.13, pp.4961-4973, 2013.

Q. Du, K. Tang, C. D. Marioara, S. J. Andersen, B. Holmedal et al., Modeling over-ageing in Al-Mg-Si alloys by a multi-phase CALPHAD-coupled Kampmann-Wagner Numerical model, Acta Materialia, vol.122, pp.178-186, 2017.

M. Enomoto and C. Atkinson, Diffusion-controlled growth of disordered interphase boundaries in finite matrix, Acta Metallurgica and Materialia, vol.41, issue.11, pp.3237-3244, 1993.

Y. Fan, Z. Yang, P. Cheng, K. Egland, and L. Yao, Investigation of effect of phase transformations on mechanical behavior of AISI 1010 steel in laser forming, Journal of Manufacturing Science and Engineering, vol.129, issue.1, pp.110-116, 2005.

F. M. Fernandes, Modélisation et calcul de l'évolution de la température et de la microstructure au cours du refroidissement continu des aciers, 1985.

F. Frank, Radially symmetric phase growth controlled by diffusion, Proceedings of the Royal Society of London. Series A, vol.201, pp.586-599, 1067.

T. Furuhara and T. Maki, Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation, Materials Science and Engineering A, vol.312, issue.1-2, pp.145-154, 2001.

E. I. Galindo-nava, W. M. Rainforth, and P. E. Rivera-díaz-del-castillo, Predicting microstructure and strength of maraging steels : Elemental optimisation, Acta Materialia, vol.117, pp.270-285, 2016.

C. Gallais, A. Denquin, Y. Bréchet, and G. Lapasset, Precipitation microstructures in an AA6056 aluminium alloy after friction stir welding : Characterisation and modelling, Materials Science and Engineering A, vol.496, issue.1-2, pp.77-89, 2008.

R. P. Garrett, S. Xu, J. Lin, and T. A. Dean, A model for predicting austenite to bainite phase transformation in producing dual phase steels, International Journal of Machine Tools and Manufacture, vol.44, issue.7-8, pp.831-837, 2004.

N. Gey, E. Gautier, M. Humbert, A. Cerqueira, J. L. Bechade et al., Study of the ?/? phase transformation of Zy-4 in presence of applied stresses at heating : analysis of the inherited microstructures and textures, Journal of Nuclear Materials, vol.302, issue.2-3, pp.175-184, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00111698

D. Godard, G. A. Sigli, and C. , The Modelling heterogeneous precipitation kinetics in a Al-Zn-Mg-Cu aluminum alloy, Institute of Metals Proceedings -International Conference on Solid-Solid Phase Transformations, vol.12, pp.145-148, 1999.

M. Hillert, Phase Equilibria, Phase Diagrams and Phase Transformations, 2007.

G. Horvay and J. W. Cahn, Dendritic and spheroidal growth, Acta Metallurgica, vol.9, issue.7, pp.695-705, 1961.

J. J. Huot, 1841 Manuels -Roret

L. Héricher, Contribution à la modélisation des transformations de phases dans les alliages de titanes : application à l'alliage ?-cez, 2004.

J. Gerdemann and S. , Titanium Process Technologies, Advanced Materials & Processes, vol.159, pp.41-43, 2001.

A. Jacot and M. Rappaz, A two-dimensional diffusion model for the prediction of phase transformations : Application to austenitization and homogenization of hypoeutectoid Fe-C steels, Acta Materialia, vol.45, issue.2, pp.575-585, 1997.

G. Jacquet, Etude de la cinétique de recristallisation au cours du laminage à chaud d'aciers inoxydables ferritiques stabilisés, 2013.

W. A. Johnson and R. F. Mehl, Reaction kinetics in processes of nucleation and growth, Transactions of the American Institute of Mining and Metallurgical Engineers, vol.135, pp.416-442, 1939.

S. Jones and H. K. Bhadeshia, Kinetics of the simultaneous decomposition of austenite into several transformation products, Acta Materialia, vol.45, pp.2911-2920, 1997.

A. Kolmogorov, P. I. Piskunov, and N. , Study of a diffusion equation that is related to the growth of a quality of matter and its application to a biological problem, Moscow University Mathematics Bulletin, vol.1, pp.1-26, 1937.

W. Kurz and D. J. Fisher, Fundamentals of Solidification, p.238, 1986.

E. Laude, Étude expérimentale et calcul des cinétiques de transformation de phase d'alliages de titane beta-métastables en fonction des traitements thermomécaniques, 1997.

E. Laude, E. Aeby-gautier, and S. Denis, Calculation of transformation kinetics of titanium alloys during continuous cooling. Institute of Materials -8th Titanium World conference, vol.620, pp.2330-2337, 1995.

L. Berre, J. L. Aeby-gautier, and E. , Traitement des Métaux : Construction du diagramme TTT d'un alliage base titane, le Ti6242. Rapport de stage de Licence Professionnelle, 2010.

F. Le-maitre, Etude des transformations en refroidissement continu de l'alliage de titane TA6V. Mémoires et Etudes scientifiques, Revue de Métallurgie LXVII, vol.9, pp.563-574, 1970.

Y. V. Leeuwen, S. Vooijs, J. Sietsma, and S. Van-der-zwaag, The effect of geometrical assumptions in modeling solid-state transformation kinetics, Metallurgical and Materials Transactions A, vol.29, pp.2925-2931, 1998.

Y. V. Leeuwen, S. Vooijs, J. Sietsma, and S. V. Zwaag, The effect of geometrical assumptions in modeling solid-state transformation kinetics, Metall and Mat Trans A, vol.29, issue.12, pp.2925-2931, 1998.

C. Leyens and M. Peters, Titanium and Titanium Alloys : Fundamentals and Applications, 2006.

Z. Liu, V. Mohles, O. Engler, and G. Gottstein, Thermodynamics based modelling of the precipitation kinetics in commercial aluminium alloys, Computational Materials Science, vol.81, pp.410-417, 2014.

Z. Liu and G. Welsch, Literature Survey on Diffusivities of Oxygen, Aluminum, and Vanadium in Alpha-Titanium, Beta-Titanium, and in Rutile, Metallurgical Transactions a-Physical Metallurgy and Materials Science, vol.19, issue.4, pp.1121-1124, 1988.

H. Lukas, G. Fries, S. Sundman, and B. , Computational thermodynamics. The CAL-PHAD method. Computational Thermodynamics : The Calphad Method 131, 2007.

G. Lütjering and J. C. Williams, , 2013.

S. Malinov, P. Markovsky, and W. Sha, Resistivity study and computer modelling of the isothermal transformation kinetics of Ti-8Al-1Mo-1V alloy, Journal of Alloys and Compounds, vol.333, issue.1-2, pp.122-132, 2002.

S. Malinov, P. Markovsky, W. Sha, and Z. Guo, Resistivity study and computer modelling of the isothermal transformation kinetics of Ti-6Al-4V and Ti-6Al-2Sn-4Zr-2Mo-0.08Si alloys, Journal of Alloys and Compounds, vol.314, issue.1-2, pp.181-192, 2001.

S. Malinov, W. Sha, and Z. Guo, Application of artificial neural network for prediction of time-temperature-transformation diagrams in titanium alloys, Materials Science and Engineering : A, vol.283, issue.1-2, pp.1-10, 2000.

S. Malinov, W. Sha, and P. Markovsky, Experimental study and computer modelling of the + phase transformation in beta21s alloy at isothermal conditions, Journal of Alloys and Compounds, vol.348, issue.1-2, pp.110-118, 2003.

N. Maury, B. Denand, M. Dehmas, C. Archambeau-mirguet, J. Delfosse et al., Influence of the ageing conditions and the initial microstructure on the precipitation of phase in Ti-17 alloy, Journal of Alloys and Compounds, vol.763, pp.446-458, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01985586

E. S. Menon and H. I. Aaronson, Nucleation, growth, and overall transformation kinetics of grain boundary allotriomorphs of proeutectoid alpha in Ti-3.2 at. pct Co and Ti-6.6 at. pct Cr alloys, Metallurgical and Materials Transactions A, vol.17, issue.10, pp.1703-1715, 1986.

J. J. Moré, The Levenberg-Marquardt algorithm : Implementation and theory. Numerical Analysis, vol.630, pp.105-116, 1978.

F. ;. Mraizika-chaussy and . Inpg-grenoble, Evolutions microstructurales en compression a chaud des alliages de titane betacez et 6246 et influence du forgeage sur la transformation ? vers ? + ?, 1996.

S. Nag, R. Banerjee, R. Srinivasan, J. Y. Hwang, M. Harper et al., ?-Assisted nucleation and growth of ? precipitates in the Ti-5Al-5Mo-5V-3Cr-0.5Fe ? titanium alloy, Acta Materialia, vol.57, issue.7, pp.2136-2147, 2009.

S. Nag, Y. Zheng, R. E. Williams, A. Devaraj, A. Boyne et al., Non-classical homogeneous precipitation mediated by compositional fluctuations in titanium alloys, Acta Materialia, vol.60, issue.18, pp.6247-6256, 2012.

M. Naveen, R. Santhosh, M. Geetha, and M. Nageswara-rao, Experimental study and computer modelling of the ? ? ?/? phase transformation in Ti15-3 alloy under isothermal conditions, Journal of Alloys and Compounds, vol.616, pp.607-613, 2014.

H. P. Ng, A. Devaraj, S. Nag, C. J. Bettles, M. Gibson et al., Phase separation and formation of omega phase in the beta matrix of a Ti-V-Cu alloy, Acta Materialia, vol.59, issue.8, pp.2981-2991, 2011.

J. Philibert, A. Vignes, Y. Bréchet, P. Combrade, and J. Talbot, , 2013.

D. A. Porter, K. E. Easterling, and M. Sherif, Phase Transformations in Metals and Alloys, 2009.

O. Prat, J. García, D. Rojas, J. P. Sanhueza, and C. Camurri, Study of nucleation, growth and coarsening of precipitates in a novel 9%Cr heat resistant steel : Experimental and modeling, Materials Chemistry and Physics, vol.143, issue.2, pp.754-764, 2014.

F. Prima, P. Vermaut, D. Ansel, and J. Debuigne, Precipitation in a Beta Metastable Titanium Alloy, Resistometric Study, Mater. Trans, vol.41, issue.8, pp.1092-1097, 2000.

W. I. Pumphrey and F. W. Jones, Inter-relation of hardenability and isothermal transformation data, Journal of the Iron ans Steel Institute, vol.159, pp.137-144, 1948.

D. Qiu, R. Shi, D. Zhang, W. Lu, and Y. Wang, Variant selection by dislocations during ? precipitation in ? + ? titanium alloys, Acta Materialia, vol.88, pp.218-231, 2015.

D. Qiu, R. Shi, P. Zhao, D. Zhang, W. Lu et al., Effect of low-angle grain boundaries on morphology and variant selection of grain boundary allotriomorphs and Widmanstätten side-plates, Acta Materialia, vol.112, pp.347-360, 2016.

O. Redlich and A. T. Kister, Algebraic representation of thermodynamic properties and the classification of solutions, Industrial and Engineering Chemistry, vol.40, issue.2, pp.345-348, 1948.

R. Reed, M. Jackson, and Y. Na, Characterization and modeling of the precipitation of the sigma phase in UDIMET 720 and UDIMET 720Li, Metallurgical and Materials Transactions A, vol.30, pp.521-533, 1999.

R. C. Reed and H. K. Bhadeshia, Kinetics of reconstructive austenite to ferrite transformation in low alloy steels, Materials Science and Technology, vol.8, pp.421-436, 1992.

J. D. Robson and P. B. Prangnell, Modelling Al 3 Zr dispersoid precipitation in multicomponent aluminium alloys, Materials Science and Engineering : A, vol.352, issue.1-2, pp.240-250, 2003.

M. Salib, Étude cinétique et cristallographique de la précipitation de la phase ? aux joints de grains ?/? dans un alliage de titane, 2015.

M. Salib, J. Teixeira, L. Germain, E. Lamielle, N. Gey et al., Influence of transformation temperature on microtexture formation associated with ? precipitation at ? grain boundaries in a ? metastable titanium alloy, Acta Materialia, issue.10, p.61, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01293814

N. Saunders, Ti-DATA, a thermodynamic database for calculation of phase equilibria in multi-component Ti-based alloys, Thermotech Ltd, 1998.

E. Scheil, Anlaufzeit der Austenitumwandlung, Archiv für das Eisenhüttenwesen, vol.8, issue.12, pp.565-567, 1935.

L. Seraphin, Réponse des alliages de titane aux traitements thermiques, Mémoires et Etudes Scientifiques -Revue de Métallurgie LXII, vol.4, pp.291-298, 1965.

M. Serriere, C. Gandin, E. Gautier, P. Archambault, and M. Dehmas, , 2002.

, Modeling of precipitation coupled with thermodynamic calculations, vol.396, pp.747-752

A. Settefrati, Étude expérimentale et modélisation par champ de phase de la formation de alpha dans les alliages de titane beta-métastable, 2012.

W. Sha and S. Malinov, Titanium Alloys : Modelling of Microstructure, Properties and Applications, 2009.

J. Sietsma and S. Van-der-zwaag, A concise model for mixed-mode phase transformations in the solid state, Acta Materialia, vol.52, pp.4143-4152, 2004.

N. Stanford and P. S. Bate, Crystallographic variant selection in Ti-6Al-4V, Acta Materialia, vol.52, issue.17, pp.5215-5224, 2004.

J. Stefan, Über die Theorie der Eisbildung, insbesondere über die Eisbildung im Polarmeere, Annalen der Physik und Chemie, vol.42, pp.269-286, 1891.

F. Sun, F. Prima, and T. Gloriant, High-strength nanostructured Ti-12Mo alloy from ductile metastable ? state precursor, Materials Science and Engineering : A, vol.527, issue.16, pp.4262-4269, 2010.

L. Tao, L. Germain, J. Teixeira, E. Aeby-gautier, and N. Gey, Hierarchical criteria to promote fast and selective ? gb precipitation at ? grain boundaries in ?-metastable Ti-alloys, Acta Materialia, vol.141, pp.97-108, 2017.

I. Thibon, D. Ansel, D. Laillé, and T. Gloriant, Interdiffusion dans les systèmes Ti-Zr et Hf-Ti-Zr. Matériaux, 2006.

S. Van-bohemen, A. Kamp, R. Petrov, L. Kestens, and J. Sietsma, Nucleation and variant selection of secondary ? plates in a ? Ti alloy, Acta Materialia, vol.56, issue.20, pp.5907-5914, 2008.

M. Volmer and . Weber, Keimbildung in übersättigten Gebilden. Zeitschrift für Physikalische Chemie, vol.119, issue.1, pp.277-301, 1926.

Y. Wang, B. Appolaire, S. Denis, P. Archambault, and B. Dussoubs, Study and modelling of microstructural evolutions and thermomechanical behaviour during the tempering of steel, International Journal of Microstructure and Materials Properties, vol.1, pp.197-207, 2006.

R. Wei, M. Enomoto, R. Hadian, H. Zurob, and G. Purdy, Growth of austenite from as-quenched martensite during intercritical annealing in an Fe-0.1C-3Mn-1.5Si alloy, Acta Materialia, vol.61, pp.697-707, 2013.

Y. B. Zeldovich, The oxidation of nitrogen in combustion and explosions, Acta Physicochimica U.R.S.S, vol.21, pp.577-628, 1946.

C. Zener, Kinetics of the decomposition of austenite, Transactions of the Metallurgical Society of AIME, vol.167, pp.550-595, 1946.

C. Zener, Theory of growth of spherical precipitates from solid solution, Journal of Applied Physics, vol.20, issue.10, pp.950-953, 1949.

Y. Zheng, R. E. Williams, D. Wang, R. Shi, S. Nag et al., Role of ? phase in the formation of extremely refined intragranular ? precipitates in metastable ?-titanium alloys, Acta Materialia, vol.103, pp.850-858, 2016.

S. Zherebtsov, G. Salishchev, and L. Semiatin, Loss of coherency of the ?/? interface boundary in titanium alloys during deformation, Philosophical Magazine Letters, vol.12, pp.903-914, 2010.

S. Van-der-zwaag, Kinetics of phase transformations in steels. Phase Transformations in Steels, Metals and Surface Engineering, vol.1, pp.126-156, 2012.