. Abaqus, Abaqus Analysis User's Guide', Abaqus 6, p.13, 2013.

K. D. Allen and K. A. Athanasiou, A surface-regional and freeze-thaw characterization of the porcine temporomandibular joint disc, Annals of Biomedical Engineering, vol.33, issue.7, pp.951-962, 2005.

K. D. Allen and K. A. Athanasiou, Viscoelastic characterization of the porcine temporomandibular joint disc under unconfined compression, Journal of Biomechanics, vol.39, issue.2, pp.312-322, 2006.

A. Almarza, A. Bean, L. Baggett, and K. Athanasiou, Biochemical analysis of the porcine temporomandibular joint disc, British Journal of Oral and Maxillofacial Surgery, vol.44, issue.2, pp.124-128, 2006.

A. J. Almarza and K. A. Athanasiou, Design characteristics for the tissue engineering of cartilaginous tissues, Annals of Biomedical Engineering, vol.32, issue.1, pp.2-17, 2004.

D. Alvarez-areiza, Réflexions sur la reconstruction prothétique de l'Articulation Temporo-Mandibulaire (ATM) à travers une étude biomécanique comparative entre sujets asymptomatique et pathologique, 2014.

D. Angelo, P. Morouço, N. Alves, T. Viana, F. Santos et al., Choosing sheep (ovis aries) as animal model for temporomandibular joint research: Morphological, histological and biomechanical characterization of the joint disc, Morphologie, vol.100, issue.331, pp.223-233, 2016.

G. Arroyave, A. Lima, R. Martins, P. Ramião, N. Jorge et al., Methodology for mechanical characterization of soft biological tissues: Arteries, 4th International Conference on Tissue Engineering, ICTE2015, An ECCOMAS Thematic Conference, vol.110, pp.74-81, 2015.

K. A. Athanasiou, A. J. Almarza, M. S. Detamore, and K. N. Kalpakci, Tissue engineering of temporomandibular joint cartilage, Synthesis Lectures on Tissue Engineering, vol.1, issue.1, pp.1-122, 2009.

E. Barrientos, F. Pelayo, E. Tanaka, M. J. Lamela-rey, and A. Fernández-canteli, Dynamic and stress relaxation properties of the whole porcine temporomandibular joint disc under compression, Journal of the Mechanical Behavior of Biomedical Materials, vol.57, pp.109-115, 2016.

M. W. Beatty, M. J. Bruno, L. R. Iwasaki, and J. C. Nickel, Strain rate dependent orthotropic properties of pristine and impulsively loaded porcine temporomandibular joint disk, Journal of Biomedical Materials Research, vol.57, issue.1, pp.25-34, 2001.

M. Beek, M. Aarnts, J. Koolstra, A. Feilzer, and T. Van-eijden, Dynamic properties of the human temporomandibular joint disc, Journal of Dental Research, vol.80, issue.3, pp.876-880, 2001.

M. Beek, J. Koolstra, and T. Van-eijden, Human temporomandibular joint disc cartilage as a poroelastic material', Clinical Biomechanics, vol.18, issue.1, pp.69-76, 2003.

A. Bermejo, O. González, and J. González, The pig as an animal model for experimentation on the temporomandibular articular complex', Oral Surgery, Oral Medicine, Oral Pathology, vol.75, issue.1, pp.18-23, 1993.

B. J. Briscoe, L. Fiori, and E. Pelillo, Nano-indentation of polymeric surfaces, Journal of Physics D: Applied Physics, vol.31, issue.19, pp.2395-2405, 1998.

J. L. Calvo-gallego, M. S. Commisso, J. Domínguez, E. Tanaka, and J. Martínez-reina, Effect of freezing storage time on the elastic and viscous properties of the porcine tmj disc, Journal of the Mechanical Behavior of Biomedical Materials, vol.71, pp.314-319, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01804268

R. S. Chadwick, Axisymmetric indentation of a thin incompressible elastic layer, SIAM Journal on Applied Mathematics, vol.62, issue.5, pp.1520-1530, 2002.

P. Chandrasekaran, B. Doyran, Q. Li, B. Han, T. E. Bechtold et al., Biomechanical properties of murine tmj articular disc and condyle cartilage via afm-nanoindentation, Journal of Biomechanics, vol.60, pp.134-141, 2017.

J. Chapuis, Une approche pour l'optimisation des opérations de soudage à l'arc, p.2, 2011.

J. Chen and L. Xu, A finite element analysis of the human temporomandibular joint, Journal of Biomechanical Engineering, vol.116, issue.4, pp.401-407, 1994.

M. Commisso, J. Calvo-gallego, J. Mayo, E. Tanaka, and J. Martínez-reina, Quasi-linear viscoelastic model of the articular disc of the temporomandibular joint, Experimental Mechanics, vol.56, issue.7, pp.1169-1177, 2016.

M. S. Commisso, J. Martínez-reina, J. Mayo, J. Domínguez, and E. Tanaka, Effect of non-uniform thickness of samples in stress relaxation tests under unconfined compression of samples of articular discs, Journal of Biomechanics, vol.47, issue.6, pp.1526-1530, 2014.

V. Creuillot, Etude de l'impact d'une prothèse dentaire implanto-portée sur le comportement des articulations temporo-mandibulaires et de l'os péri-implantaire, 2016.

A. M. Dagro and K. T. Ramesh, Nonlinear contact mechanics for the indentation of hyperelastic cylindrical bodies, Mechanics of Soft Materials, vol.1, issue.1, 2019.

A. Dai, S. Wang, L. Zhou, H. Wei, Z. Wang et al., In vivo mechanical characterization of human facial skin combining curved surface imaging and indentation techniques, Skin Research and Technology, vol.25, issue.2, pp.142-149, 2019.

A. P. Del-palomar and M. Doblaré, Finite element analysis of the temporomandibular joint during lateral excursions of the mandible, Journal of Biomechanics, vol.39, issue.12, pp.2153-2163, 2006.

M. S. Detamore and K. A. Athanasiou, Motivation, characterization, and strategy for tissue engineering the temporomandibular joint disc, Tissue engineering, vol.9, issue.6, pp.1065-1087, 2003.

M. S. Detamore and K. A. Athanasiou, Tensile properties of the porcine temporomandibular joint disc, Journal of Biomechanical Engineering, vol.125, issue.4, pp.558-565, 2003.

M. S. Detamore, J. G. Orfanos, A. J. Almarza, M. M. French, M. E. Wong et al., Quantitative analysis and comparative regional investigation of the extracellular matrix of the porcine temporomandibular joint disc, Matrix Biology, vol.24, issue.1, pp.45-57, 2005.

E. K. Dimitriadis, F. Horkay, J. Maresca, B. Kachar, and R. S. Chadwick, Determination of elastic moduli of thin layers of soft material using the atomic force microscope', Biophysical Journal, vol.82, issue.5, pp.2798-2810, 2002.

R. M. Do-nascimento, A. Baldit, N. Kokanyan, L. K. Tappert, P. Lipinski et al., Mechanical-chemical coupling in temporomandibular joint disc, p.100549, 2020.
URL : https://hal.archives-ouvertes.fr/hal-02497206

R. E. Druzinsky, The time allometry of mammalian chewing movements: Chewing frequency scales with body mass in mammals, Journal of Theoretical Biology, vol.160, issue.4, pp.427-440, 1993.

G. Dusfour, Contribution à l'étude de la croissance du disque intervertébral et de cartilage de synthèse, 2018.

S. Fazaeli, S. Ghazanfari, V. Everts, T. Smit, and J. Koolstra, The contribution of collagen fibers to the mechanical compressive properties of the temporomandibular joint disc, Osteoarthritis and Cartilage, vol.24, issue.7, pp.1292-1301, 2016.

P. Fernandez, M. J. Lamela-rey, and A. Fernández-canteli, Viscoelastic characterisation of the temporomandibular joint disc in bovines, Strain, vol.47, issue.2, pp.188-193, 2011.

P. Fernández, M. J. Lamela, A. Ramos, A. Fernández-canteli, and E. Tanaka, The region-dependent dynamic properties of porcine temporomandibular joint disc under unconfined compression, Journal of Biomechanics, vol.46, issue.4, pp.845-848, 2013.

A. Fischer-cripps and B. Lawn, Indentation stress-strain curves for "quasiductile" ceramics, Acta Materialia, vol.44, issue.2, pp.519-527, 1996.

Y. Fung, Biomechanics: Mechanical Properties of Living Tissues, 1993.

A. Gent, Engineering with Rubber: How to Design Rubber Components, 2012.

D. R. Gray and D. M. Al-ani, Temporomandibular Disorders: A problem based approach, pp.1-5, 2011.

S. Gutman, D. Kim, S. Tarafder, S. Velez, J. Jeong et al., Regionally variant collagen alignment correlates with viscoelastic properties of the disc of the human temporomandibular joint, Archives of Oral Biology, vol.86, pp.1-6, 2018.

E. Hattori-hara, S. N. Mitsui, H. Mori, K. Arafurue, T. Kawaoka et al., The influence of unilateral disc displacement on stress in the contralateral joint with a normally positioned disc in a human temporomandibular joint: An analytic approach using the finite element method, Journal of Cranio-Maxillofacial Surgery, vol.42, issue.8, pp.2018-2024, 2014.

S. W. Herring, J. D. Decker, Z. Liu, and T. Ma, Temporomandibular joint in miniature pigs: Anatomy, cell replication, and relation to loading, The Anatomical Record, vol.266, issue.3, pp.152-166, 2002.

H. Hertz, Über die Berührung fester elastischer Körper, Journal für reine und angewandte Mathematik, vol.92, pp.156-171, 1882.

M. Hirose, E. Tanaka, M. Tanaka, R. Fujita, Y. Kuroda et al., Three-dimensional finite-element model of the human temporomandibular joint disc during prolonged clenching, European Journal of Oral Sciences, vol.114, issue.5, pp.441-448, 2006.

T. H. Hohl and W. H. Tucek, Measurement of condylar loading forces by instrumented prosthesis in the baboon, Journal of Maxillofacial Surgery, vol.10, pp.1-7, 1982.

W. L. Hylander, An experimental analysis of temporomandibular joint reaction force in macaques, American Journal of Physical Anthropology, vol.51, issue.3, pp.433-456, 1979.

N. Iwashita, M. V. Swain, J. S. Field, N. Ohta, and S. Bitoh, Elastoplastic deformation of glass-like carbons heat-treated at different temperatures, Carbon, vol.39, issue.10, pp.1525-1532, 2001.

M. Jaisson, P. Lestriez, R. Taiar, and K. Debray, Finite element modeling of tmj joint disc behavior, International Orthodontics, vol.10, issue.1, pp.66-84, 2012.

A. W. Johnson, A. O. Moghaddam, J. Wei, A. Dunn, and J. Kim, An indentation-based approach to determine the elastic constants of tendon. Oral presentation, 2018.

K. Johnson, Contact Mechanics, 1985.

C. M. Juran, M. F. Dolwick, and P. S. Mcfetridge, Mechanobiological assessment of tmj disc surfaces: Nanoindentation and transmission electron microscopy', Journal of oral & maxillofacial research, vol.6, issue.4, 2015.

S. R. Kalidindi, A. Abusafieh, and E. El-danaf, Accurate characterization of machine compliance for simple compression testing, Experimental Mechanics, vol.37, issue.2, pp.210-215, 1997.

K. Kalpakci, V. Willard, M. Wong, and K. Athanasiou, An interspecies comparison of the temporomandibular joint disc, Journal of dental research, vol.90, issue.2, pp.193-198, 2011.

K. Kim, M. E. Wong, J. F. Helfrick, J. B. Thomas, and K. A. Athanasiou, Biomechanical tissue characterization of the superior joint space of the porcine temporomandibular joint, Annals of Biomedical Engineering, vol.31, issue.8, pp.924-930, 2003.

J. Koolstra, E. Tanaka, and T. V. Eijden, Viscoelastic material model for the temporomandibular joint disc derived from dynamic shear tests or strain-relaxation tests, Journal of Biomechanics, vol.40, issue.10, pp.2330-2334, 2007.

T. Kuboki, Y. Takenami, M. G. Orsini, K. Maekawa, A. Yamashita et al., Effect of occlusal appliances and clenching on the internally deranged tmj space, Journal of Orofacial Pain, vol.13, issue.1, pp.38-48, 1999.

J. Kuo, L. Zhang, T. Bacro, and H. Yao, The region-dependent biphasic viscoelastic properties of human temporomandibular joint discs under confined compression, Journal of Biomechanics, vol.43, issue.7, pp.1316-1321, 2010.

M. J. Lamela, F. Pelayo, A. Ramos, A. Fernández-canteli, and E. Tanaka, Dynamic compressive properties of articular cartilages in the porcine temporomandibular joint, Journal of the Mechanical Behavior of Biomedical Materials, vol.23, pp.62-70, 2013.

M. Lamela, Y. Prado, P. Fernández, A. Fernández-canteli, and E. Tanaka, Non-linear viscoelastic model for behaviour characterization of temporomandibular joint discs, Experimental mechanics, vol.51, issue.8, pp.1435-1440, 2011.

Y. Lanir, Mechanisms of Residual Stress in Soft Tissues, Journal of Biomechanical Engineering, vol.131, issue.4, 2009.

L. Floch, S. Ambard, D. Baldit, A. Kouyoumdjian, P. Canadas et al., Residual stress in pig intervertebral discs, 2015.

H. Lee, W. D. Campbell, M. E. Canning, K. M. Theis, H. Y. Ennis et al., Correlation between signalment and the biphasic hyperelastic mechanical properties of equine articular cartilage, Biotribology, vol.7, pp.31-37, 2016.

D. C. Lin and F. Horkay, Nanomechanics of polymer gels and biological tissues: A critical review of analytical approaches in the hertzian regime and beyond, Soft Matter, vol.4, pp.669-682, 2008.

D. C. Lin, D. I. Shreiber, E. K. Dimitriadis, and F. Horkay, Spherical indentation of soft matter beyond the hertzian regime: numerical and experimental validation of hyperelastic models, Biomechanics and Modeling in Mechanobiology, vol.8, issue.5, p.345, 2009.

D. Lin, E. Dimitriadis, and F. Horkay, Elasticity of rubber-like materials measured by afm nanoindentation, Express Polym Lett, vol.1, issue.9, pp.576-584, 2007.

D. Liu, Z. Zhang, and L. Sun, Nonlinear elastic load-displacement relation for spherical indentation on rubberlike materials, Journal of Materials Research, vol.25, issue.11, pp.2197-2202, 2010.

S. Q. Liu and Y. C. Fung, Zero-Stress States of Arteries, Journal of Biomechanical Engineering, vol.110, issue.1, pp.82-84, 1988.

X. L. Lu and V. C. Mow, Biomechanics of articular cartilage and determination of material properties, Medicine & Science in Sports & Exercise, vol.40, issue.2, pp.193-199, 2008.

S. B. Lumpkins and P. S. Mcfetridge, Regional variations in the viscoelastic compressive properties of the temporomandibular joint disc and implications toward tissue engineering, Journal of Biomedical Materials Research Part A, vol.90, issue.3, pp.784-791, 2009.

A. M. Matuska, S. Muller, M. Dolwick, and P. S. Mcfetridge, Biomechanical and biochemical outcomes of porcine temporomandibular joint disc deformation, Archives of Oral Biology, vol.64, pp.72-79, 2016.

D. K. Mills, D. J. Fiandaca, and R. P. Scapino, Morphologic, microscopic, and immunohistochemical investigations into the function of the primate tmj disc, Journal of orofacial pain, vol.8, issue.2, 1994.

A. M. Minarelli, M. Santo, and E. A. Liberti, The structure of the human temporomandibular joint disc: a scanning electron microscopy study, Journal of orofacial pain, vol.11, issue.2, pp.95-100, 1997.

M. Mooney, A theory of large elastic deformation, Journal of applied physics, vol.11, issue.9, pp.582-592, 1940.

H. Mori, S. Horiuchi, S. Nishimura, H. Nikawa, T. Murayama et al., Three-dimensional finite element analysis of cartilaginous tissues in human temporomandibular joint during prolonged clenching, Archives of Oral Biology, vol.55, issue.11, pp.879-886, 2010.

V. C. Mow, M. H. Holmes, and W. M. Lai, Fluid transport and mechanical properties of articular cartilage: A review, Journal of Biomechanics, vol.17, issue.5, pp.377-394, 1984.

, Prevalence of TMJD and its signs and symptoms'. -National Institute of Dental and Craniofacial Research (NIDCR), assessed 25.06, 2017.

D. Nelson, Experimental methods for determining residual stresses and strains in various biological structures, Experimental Mechanics, vol.54, issue.4, pp.695-708, 2014.

J. Nickel and K. Mclachlan, In vitro measurement of the stress-distribution properties of the pig temporomandibular joint disc, Archives of Oral Biology, vol.39, issue.5, pp.439-448, 1994.

R. W. Ogden, Large deformation isotropic elasticity-on the correlation of theory and experiment for incompressible rubberlike solids, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, vol.326, pp.565-584, 1567.

R. S. Rivlin, Large elastic deformations of isotropic materials. I. Fundamental concepts, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, vol.240, issue.822, pp.459-490, 1948.

C. Savoldelli, P. Bouchard, R. Loudad, P. Baque, and Y. Tillier, Stress distribution in the temporo-mandibular joint discs during jaw closing: a high-resolution three-dimensional finite-element model analysis, Surgical and Radiologic Anatomy, vol.34, issue.5, pp.405-413, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00654635

G. Snider, J. Lomakin, M. Singh, S. Gehrke, and M. Detamore, Regional dynamic tensile properties of the tmj disc, Journal of Dental Research, vol.87, issue.11, pp.1053-1057, 2008.

S. Stankovi?, S. Vlajkovi?, M. Bo?kovi?, G. Radenkovi?, V. Anti? et al., Morphological and biomechanical features of the temporomandibular joint disc: An overview of recent findings, Archives of Oral Biology, vol.58, issue.10, pp.1475-1482, 2013.

D. Tabor, A simple theory of static and dynamic hardness, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol.192, pp.247-274, 1029.

D. Tabor, The hardness of metals, Monographs on the physics and chemistry of materials, 1951.

E. Tanaka, R. Del-pozo, M. Tanaka, J. Aoyama, K. Hanaoka et al., Strain-rate effect on the biomechanical response of bovine temporomandibular joint disk under compression, Journal of Biomedical Materials Research Part A, vol.67, issue.3, pp.761-765, 2003.

E. Tanaka, M. Kikuzaki, K. Hanaoka, M. Tanaka, A. Sasaki et al., Dynamic compressive properties of porcine temporomandibular joint disc, European Journal of Oral Sciences, vol.111, issue.5, pp.434-439, 2003.

E. Tanaka, M. Tanaka, J. Aoyama, M. Watanabe, Y. Hattori et al., Viscoelastic properties and residual strain in a tensile creep test on bovine temporomandibular articular discs, vol.47, pp.139-146, 2002.

E. Tanaka, M. Tanaka, Y. Miyawaki, and K. Tanne, Viscoelastic properties of canine temporomandibular joint disc in compressive load-relaxation', Archives of Oral Biology, vol.44, issue.12, pp.1021-1026, 1999.

E. Tanaka and T. Van-eijden, Biomechanical behavior of the temporomandibular joint disc, Critical Reviews in Oral Biology & Medicine, vol.14, issue.2, pp.138-150, 2003.

K. Tanne, E. Tanaka, and M. Sakuda, The elastic modulus of the temporomandibular joint disc from adult dogs, Journal of Dental Research, vol.70, issue.12, pp.1545-1548, 1991.

L. Tappert, A. Baldit, C. Laurent, M. Ferrari, and P. Lipinski, Acquisition of accurate temporomandibular joint disc external shape and internal microstructure'. Poster presentation, 8th World Congress of Biomechanics, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01860193

L. Tappert, A. Baldit, R. Rahouadj, and P. Lipinski, Local elastic properties characterization of the temporo-mandibular joint disc through macro-indentation, Computer Methods in Biomechanics and Biomedical Engineering, vol.20, issue.sup1, pp.201-202, 2017.

L. K. Tappert, A. Baldit, R. M. Do-nascimento, P. Lipinski, and R. Rahouadj, Mechanical characterisation of the temporomandibular joint disc through local compression and traction, BSSM's International Conference on Advances in Experimental Mechanics, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02063154

G. S. Throckmorton and P. C. Dechow, In vitro strain measurements in the condylar process of the human mandible, Archives of Oral Biology, vol.39, issue.10, pp.853-867, 1994.

J. Valladares-neto, C. Estrela, M. R. Bueno, O. A. Guedes, O. C. Porto et al., Mandibular condyle dimensional changes in subjects from 3 to 20 years of age using Cone-Beam Computed Tomography: A preliminary study, Dental Press Journal of Orthodontics, vol.15, pp.172-181, 2010.

V. D. Varner and L. A. Taber, On measuring stress distributions in epithelia, IUTAM Symposium on Cellular, Molecular and Tissue Mechanics, pp.45-54, 2010.

V. P. Willard, L. Zhang, and K. A. Athanasiou, Tissue engineering of the temporomandibular joint, vol.5, pp.221-235, 2011.

G. J. Wright, M. C. Coombs, R. G. Hepfer, B. J. Damon, T. H. Bacro et al., Tensile biomechanical properties of human temporomandibular joint disc: Effects of direction, region and sex, Journal of Biomechanics, vol.49, issue.16, pp.3762-3769, 2016.

C. Wu, K. Lin, and J. Juang, Hertzian load-displacement relation holds for spherical indentation on soft elastic solids undergoing large deformations, Tribology International, vol.97, pp.71-76, 2016.

P. A. Yuya, E. K. Amborn, M. W. Beatty, and J. A. Turner, Evaluating anisotropic properties in the porcine temporomandibular joint disc using nanoindentation, Annals of Biomedical Engineering, vol.38, issue.7, pp.2428-2437, 2010.

M. Zhang, Y. Cao, G. Li, and X. Feng, Spherical indentation method for determining the constitutive parameters of hyperelastic soft materials, Biomechanics and Modeling in Mechanobiology, vol.13, issue.1, pp.1-11, 2014.

Q. Zhang, X. Li, and Q. Yang, Extracting the isotropic uniaxial stress-strain relationship of hyperelastic soft materials based on new nonlinear indentation strain and stress measure, AIP Advances, vol.8, issue.11, p.115013, 2018.

Q. Zhang and Q. Yang, Effects of large deformation and material nonlinearity on spherical indentation of hyperelastic soft materials, Mechanics Research Communications, vol.84, pp.55-59, 2017.