A. Hartwig, D. Heederik, C. L. Klein, H. Kromhout, L. Levy et al., European Commission, S.A. and I. Directorate-General for Employment, SCOEL/REC/386 Chromium VI compounds: recommendation from the Scientific Committee on Occupational Exposure Limits, 2017.

R. Smith, Regulation (EC) No 764/2008 of the European Parliament and of the Council, in: Core EU Legislation, pp.183-186, 2015.

A. L. Yerokhin, X. Nie, A. Leyland, A. Matthews, and S. J. Dowey, Plasma electrolysis for surface engineering, Surf. Coat. Technol, vol.122, pp.73-93, 1999.

A. A. Voevodin, A. L. Yerokin, V. V. Lyubimov, M. S. Donley, and J. S. Zabinski, Characterization of wear protective Al-Si-0 coatings forrned on Al-based alloys by micro-arc discharge treatment, pp.516-521, 1996.

L. R. Krishna, A. S. Purnima, and G. Sundararajan, A comparative study of tribological behavior of microarc oxidation and hard-anodized coatings, Wear, vol.261, pp.1095-1101, 2006.

J. A. Curran, H. Kalkanc?, Y. Magurova, and T. W. Clyne, Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications, Surf. Coat. Technol, vol.201, pp.8683-8687, 2007.

K. Tillous, T. Toll-duchanoy, E. Bauer-grosse, L. Hericher, and G. Geandier, Microstructure and phase composition of microarc oxidation surface layers formed on aluminium and its alloys 2214-T6 and 7050-T74, Surf. Coat. Technol, vol.203, pp.2969-2973, 2009.

E. Arslan, Y. Totik, E. E. Demirci, Y. Vangolu, A. Alsaran et al., High temperature wear behavior of aluminum oxide layers produced by AC micro arc oxidation, Surf. Coat. Technol, vol.204, pp.829-833, 2009.

A. Güntherschulze and H. Betz, Neue Untersuchungen Über Die Elektolytische Ventilwirkung, 1931.

W. Mcneill, The Preparation of Cadmium Niobate by an Anodic Spark Reaction, J. Electrochem. Soc, vol.105, p.544, 1958.

G. A. Makrov, G. A. Terleeva, and E. K. Shulepko, Micro arc and arc methods of protective coatings deposition, Proceedings of Gupkin's Institute of petrochemical and gas industry, vol.185, pp.54-65, 1985.

W. Krysmann, P. Kurze, K. Dittrich, and H. G. Schneider, Process characteristics and parameters of Anodic Oxidation by spark discharge (ANOF), Cryst. Res. Technol, vol.19, pp.973-979, 1984.

J. Yahalom and T. P. Hoar, Galvanostatic anodizing of aluminium, Electrochim. Acta, vol.15, pp.877-884, 1970.

S. D. Brown, K. J. Kuna, and T. B. Van, Anodic spark deposition from aqueous solutions of NaAlO2 and Na2SiO3, J. Am. Cer. Soc, vol.54, pp.384-390, 1971.

X. Nie, A. Leyland, H. W. Song, A. L. Yerokhin, S. J. Dowey et al., Thickness effects on the mechanical properties of micro-arc discharge oxide coatings on aluminium alloys, Surf. Coat. Technol, pp.1055-1060, 1999.

H. F. Guo, M. Z. An, H. B. Huo, S. Xu, and L. J. Wu, Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions, Appl. Surf. Sci, vol.252, pp.7911-7916, 2006.

S. Xin, L. Song, R. Zhao, and X. Hu, Influence of cathodic current on composition, structure and properties of Al2O3 coatings on aluminum alloy prepared by micro-arc oxidation process, Thin Solid Films, vol.515, pp.326-332, 2006.

A. L. Yerokhin, V. V. Lyubimov, and R. V. Ashitkov, Phase formation in ceramic coatings during plasma electrolytic oxidation of aluminium alloys, Ceramics International, vol.24, pp.1-6, 1998.

F. Jaspard-mécuson, T. Czerwiec, G. Henrion, T. Belmonte, L. Dujardin et al., Tailored aluminium oxide layers by bipolar current adjustment in the Plasma Electrolytic Oxidation (PEO) process, vol.201, pp.8677-8682, 2007.

J. Martin, A. Melhem, I. Shchedrina, T. Duchanoy, A. Nominé et al., Effects of electrical parameters on plasma electrolytic oxidation of aluminium, Surf. Coat. Technol, vol.221, pp.70-76, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01284934

C. S. Dunleavy, I. O. Golosnoy, J. A. Curran, and T. W. Clyne, Characterisation of discharge events during plasma electrolytic oxidation, Surf. Coat. Technol, vol.203, pp.3410-3419, 2009.

A. L. Yerokhin, L. O. Snizhko, N. L. Gurevina, A. Leyland, A. Pilkington et al., Discharge characterization in plasma electrolytic oxidation of aluminium, Journal of Physics D: Applied Physics, vol.36, pp.2110-2120, 2003.

R. O. Hussein, X. Nie, D. O. Northwood, A. Yerokhin, and A. Matthews, Spectroscopic study of electrolytic plasma and discharging behaviour during the plasma electrolytic oxidation (PEO) process, Journal of Physics D: Applied Physics, vol.43, p.105203, 2010.

M. D. Klapkiv, H. M. Nykyforchyn, and V. M. Posuvailo, Spectral analysis of an electrolytic plasma in the process of synthesis of aluminum oxide, Mater Sci, vol.30, pp.333-343, 1995.

A. Vladimirovich-timoshenko, Y. Vladimirovna, and . Magurova, Application of oxide coatings to metals in electrolyte solutions by microplasma methods, REVMETAL, vol.36, pp.323-330, 2000.

T. W. Clyne and S. C. Troughton, A review of recent work on discharge characteristics during plasma electrolytic oxidation of various metals, Int. Mat. Rev, vol.64, pp.127-162, 2019.

S. V. Gnedenkov, O. A. Khrisanfova, A. G. Zavidnaya, S. L. Sinebrukhov, A. N. Kovryanov et al., Production of hard and heat-resistant coatings on aluminium using a plasma micro-discharge, Surf. Coat. Technol, vol.123, pp.24-28, 2000.

J. Martin, P. Leone, A. Nominé, D. Veys-renaux, G. Henrion et al., Influence of electrolyte ageing on the Plasma Electrolytic Oxidation of aluminium, vol.269, pp.36-46, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01285978

R. O. Hussein, X. Nie, and D. O. Northwood, Influence of process parameters on electrolytic plasma discharging behaviour and aluminum oxide coating microstructure, Surf. Coat. Technol, vol.205, pp.1659-1667, 2010.

E. V. Parfenov, A. Yerokhin, and A. Matthews, Small signal frequency response studies for plasma electrolytic oxidation, Surf. Coat. Technol, vol.203, pp.2896-2904, 2009.

A. L. Yerokhin, A. Shatrov, V. Samsonov, P. Shashkov, A. Pilkington et al., Oxide ceramic coatings on aluminium alloys produced by a pulsed bipolar plasma electrolytic oxidation process, Surf. Coat. Technol, vol.199, pp.150-157, 2005.

L. O. Snizhko, A. L. Yerokhin, A. Pilkington, N. L. Gurevina, D. O. Misnyankin et al., Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions, Electrochim. Acta, vol.49, pp.2085-2095, 2004.

A. Nominé, A. V. Nominé, N. J. St, T. Braithwaite, G. Belmonte et al., High-Frequency-Induced Cathodic Breakdown during Plasma Electrolytic Oxidation, Physical Review Applied, vol.8, 2017.

G. Lv, H. Chen, W. Gu, L. Li, E. Niu et al., Effects of current frequency on the structural characteristics and corrosion property of ceramic coatings formed on magnesium alloy by PEO technology, J. Mat. Proc. Technol, vol.208, pp.9-13, 2008.

A. Melhem, G. Henrion, T. Czerwiec, J. L. Briançon, T. Duchanoy et al., Changes induced by process parameters in oxide layers grown by the PEO process on Al alloys, Surface and Coatings Technology, vol.205, pp.133-136, 2011.
URL : https://hal.archives-ouvertes.fr/hal-02190530

X. Ma, C. Blawert, D. Höche, M. L. Zheludkevich, and K. U. Kainer, Investigation of electrode distance impact on PEO coating formation assisted by simulation, Appl. Surf. Sci, vol.388, pp.304-312, 2016.

V. Dehnavi, B. L. Luan, X. Y. Liu, D. W. Shoesmith, and S. Rohani, Correlation between plasma electrolytic oxidation treatment stages and coating microstructure on aluminum under unipolar pulsed DC mode, Surf. Coat. Technol, vol.269, pp.91-99, 2015.

J. Jovovi?, S. Stojadinovi?, N. M. ?i?ovi?, and N. Konjevi?, Spectroscopic study of plasma during electrolytic oxidation of magnesium-and aluminium-alloy, Journal of Quantitative Spectroscopy and Radiative Transfer, vol.113, pp.1928-1937, 2012.

Q. B. Li, C. C. Liu, W. B. Yang, and J. Liang, Growth mechanism and adhesion of PEO coatings on 2024Al alloy, Surface Engineering, vol.33, pp.760-766, 2017.

S. Stojadinovi?, R. Vasili?, M. Petkovi?, . Lj, and . Zekovi?, Plasma electrolytic oxidation of titanium in heteropolytungstate acids, Surf. Coat. Technol, vol.206, pp.575-581, 2011.

E. Matykina, R. Arrabal, P. Skeldon, and G. E. Thompson, Transmission electron microscopy of coatings formed by plasma electrolytic oxidation of titanium, Acta Biomaterialia, vol.5, pp.1356-1366, 2009.

S. Stojadinovi?, J. Radi?-peri?, R. Vasili?, and M. Peri?, Spectroscopic Investigation of Direct Current (DC) Plasma Electrolytic Oxidation of Zirconium in Citric Acid, vol.68, pp.101-112, 2014.

R. H. Khan, A. Yerokhin, X. Li, H. Dong, and A. Matthews, Surface characterisation of DC plasma electrolytic oxidation treated 6082 aluminium alloy: Effect of current density and electrolyte concentration, Surf. Coat. Technol, vol.205, pp.1679-1688, 2010.

K. Wang, B. Koo, C. Lee, Y. Kim, S. Lee et al., Effects of electrolytes variation on formation of oxide layers of 6061 Al alloys by plasma electrolytic oxidation, Transactions of Nonferrous Metals Society of China, vol.19, pp.866-870, 2009.

K. R. Shin, Y. G. Ko, and D. H. Shin, Effect of electrolyte on surface properties of pure titanium coated by plasma electrolytic oxidation, Journal of Alloys and Compounds, vol.509, pp.478-481, 2011.

M. Shokouhfar, C. Dehghanian, M. Montazeri, and A. Baradaran, Preparation of ceramic coating on Ti substrate by plasma electrolytic oxidation in different electrolytes and evaluation of its corrosion resistance: Part II, Applied Surface Science, vol.258, pp.2416-2423, 2012.

X. Lu, C. Blawert, K. U. Kainer, T. Zhang, F. Wang et al., Influence of particle additions on corrosion and wear resistance of plasma electrolytic oxidation coatings on Mg alloy, Surf. Coat. Technol, vol.352, pp.1-14, 2018.

X. Lu, M. Mohedano, C. Blawert, E. Matykina, R. Arrabal et al., Plasma electrolytic oxidation coatings with particle additions -A review, Surf.Coat. Technol, vol.307, pp.1165-1182, 2016.

H. Duan, C. Yan, and F. Wang, Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D, Electrochim. Acta, vol.52, pp.3785-3793, 2007.

M. O'hara, S. C. Troughton, R. Francis, and T. W. Clyne, The incorporation of particles suspended in the electrolyte into plasma electrolytic oxidation coatings on Ti and Al substrates, Surf. Coat. Technol, vol.385, p.125354, 2020.

J. Michalska, M. Sowa, M. Piotrowska, M. Widzio?ek, G. Tylko et al., Incorporation of Ca ions into anodic oxide coatings on the Ti-13Nb-13Zr alloy by plasma electrolytic oxidation, Materials Science and Engineering: C, vol.104, p.109957, 2019.

S. Stojadinovi?, N. Tadi?, N. Radi?, B. Grbi?, and R. Vasili?, CdS particles modified TiO2 coatings formed by plasma electrolytic oxidation with enhanced photocatalytic activity, Surf. Coat. Technol, vol.344, pp.528-533, 2018.

J. Wang, D. Tsai, J. T. Tsai, and C. Chou, Coloring the aluminum alloy surface in plasma electrolytic oxidation with the green pigment colloid, Surf. Coat. Technol, vol.321, pp.164-170, 2017.

Y. Chen, X. Lu, C. Blawert, M. L. Zheludkevich, T. Zhang et al., Formation of selflubricating PEO coating via in-situ incorporation of PTFE particles, Surf. Coat. Technol, vol.337, pp.379-388, 2018.

M. Mohedano, C. Blawert, and M. L. Zheludkevich, Silicate-based Plasma Electrolytic Oxidation (PEO) coatings with incorporated CeO2 particles on AM50 magnesium alloy, vol.86, pp.735-744, 2015.

D. V. Mashtalyar, S. V. Gnedenkov, S. L. Sinebryukhov, I. M. Imshinetskiy, and A. V. Puz, Plasma electrolytic oxidation of the magnesium alloy MA8 in electrolytes containing TiN nanoparticles, J. Mat. Sci. & Technol, vol.33, pp.461-468, 2017.

B. Lou, Y. Lin, C. Tseng, Y. Lu, J. Duh et al., Plasma electrolytic oxidation coatings on AZ31 magnesium alloys with Si3N4 nanoparticle additives, vol.332, pp.358-367, 2017.

E. Matykina, R. Arrabal, B. Mingo, M. Mohedano, A. Pardo et al., In vitro corrosion performance of PEO coated Ti and Ti6Al4V used for dental and orthopaedic implants, Surf. Coat. Technol, vol.307, pp.1255-1264, 2016.

A. V. Timoshenko and Y. V. Magurova, Investigation of plasma electrolytic oxidation processes of magnesium alloy MA2-1 under pulse polarisation modes, Surf. Coat. Technol, vol.199, pp.135-140, 2005.

P. Srinivasan, J. Liang, R. G. Balajeee, C. Blawert, M. Störmer et al., Effect of pulse frequency on the microstructure, phase composition and corrosion performance of a phosphatebased plasma electrolytic oxidation coated AM50 magnesium alloy, Appl. Surf. Sci, vol.256, pp.3928-3935, 2010.

X. Zhang, Y. Zhang, L. Chang, Z. Jiang, Z. Yao et al., Effects of frequency on growth process of plasma electrolytic oxidation coating, Mater. Chem. Phys, vol.132, pp.909-915, 2012.

A. B. Rogov, A. Yerokhin, and A. Matthews, The role of cathodic current in plasma electrolytic oxidation of aluminum: Phenomenological concepts of the "soft sparking" mode, Langmuir, vol.33, pp.11059-11069, 2017.

P. Lukes, M. Clupek, V. Babicky, and P. Sunka, The Role of Surface Chemistry at Ceramic/Electrolyte Interfaces in the Generation of Pulsed Corona Discharges in Water Using Porous Ceramic-Coated Rod Electrodes, Plasma Processes Polym, vol.6, pp.719-728, 2009.

Y. Cheng, F. Wu, E. Matykina, P. Skeldon, and G. E. Thompson, The influences of microdischarge types and silicate on the morphologies and phase compositions of plasma electrolytic oxidation coatings on Zircaloy-2, Corr. Sci, vol.59, pp.307-315, 2012.

E. Matykina, A. Berkani, P. Skeldon, and G. E. Thompson, Real-time imaging of coating growth during plasma electrolytic oxidation of titanium, Electrochim. Acta, vol.53, pp.1987-1994, 2007.

S. Stojadinovi?, J. Jovovi?, M. Petkovi?, R. Vasili?, and N. Konjevi?, Spectroscopic and real-time imaging investigation of tantalum plasma electrolytic oxidation (PEO), Surf. Coat. Technol, vol.205, pp.5406-5413, 2011.

J. Martin, A. Nominé, F. Brochard, J. Briançon, C. Noël et al., Delay in micro-discharges appearance during PEO of Al: Evidence of a mechanism of charge accumulation at the electrolyte/oxide interface, Appl. Surf. Sci, vol.410, pp.29-41, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02106037

R. Arrabal, E. Matykina, T. Hashimoto, P. Skeldon, and G. E. Thompson, Characterization of AC PEO coatings on magnesium alloys, vol.203, pp.2207-2220, 2009.

S. P. Sah, E. Tsuji, Y. Aoki, and H. Habazaki, Cathodic pulse breakdown of anodic films on aluminium in alkaline silicate electrolyte -Understanding the role of cathodic half-cycle in AC plasma electrolytic oxidation, Corr. Sci, vol.55, pp.90-96, 2011.

A. Melhem, Oxydation par plasma électrolytique : influence des paramètres du procédé sur le comportement des micro-décharges et conséquences sur les couches d'oxyde, 2011.

C. S. Dunleavy, J. A. Curran, and T. W. Clyne, Time dependent statistics of plasma discharge parameters during bulk AC plasma electrolytic oxidation of aluminium, Appl. Surf. Sci, vol.268, pp.397-409, 2013.

S. Stojadinovi?, R. Vasili?, M. Petkovi?, B. Kasalica, I. Bel?a et al., Characterization of the plasma electrolytic oxidation of titanium in sodium metasilicate, Appl. Surf. Sci, vol.265, pp.226-233, 2013.

S. Stojadinovi?, M. Peri?, J. Radi?-peri?, R. Vasili?, M. Petkovi? et al., Luminescence of the B1?+-X1?+ band system of MgO during plasma electrolytic oxidation of magnesium alloy, vol.206, pp.2905-2913, 2012.

S. Stojadinovi?, M. Peri?, M. Petkovi?, R. Vasili?, B. Kasalica et al., Luminescence of the B2?+-X2?+ band system of AlO during plasma electrolytic oxidation of aluminum, vol.56, pp.10122-10129, 2011.

X. Yang, L. Chen, Y. Qu, R. Liu, K. Wei et al., Optical emission spectroscopy of plasma electrolytic oxidation process on 7075 aluminum alloy, Surf. Coat. Technol, vol.324, pp.18-25, 2017.

R. Liu, J. Wu, W. Xue, Y. Qu, C. Yang et al., Discharge behaviors during plasma electrolytic oxidation on aluminum alloy, vol.148, pp.284-292, 2014.

S. Stojadinovic, R. Vasilic, I. Belca, M. Petkovic, B. Kasalica et al., Characterization of the plasma electrolytic oxidation of aluminium in sodium tungstate, Corr. Sci, vol.52, pp.3258-3265, 2010.

Y. Wu, Z. Yang, R. Wang, G. Wu, D. Chen et al., An investigation of microstructure evolution for plasma electrolytic oxidation (PEO) coated Al in an alkaline silicate electrolyte, Surf. Coat. Technol, vol.351, pp.136-152, 2018.

G. Sundararajan and L. R. Krishna, Mechanisms underlying the formation of thick alumina coatings through the MAO coating technology, Surf. Coat. Technol, vol.167, pp.269-277, 2003.

D. T. Asquith, A. L. Yerokhin, J. R. Yates, and A. Matthews, Effect of combined shot-peening and PEO treatment on fatigue life of 2024 Al alloy, Thin Solid Films, vol.515, pp.1187-1191, 2006.

R. H. Khan, A. L. Yerokhin, T. Pilkington, A. Leyland, and A. Matthews, Residual stresses in plasma electrolytic oxidation coatings on Al alloy produced by pulsed unipolar current, Surf. Coat. Technol, vol.200, pp.1580-1586, 2005.

P. Srinivasan, C. Blawert, and W. Dietzel, Effect of plasma electrolytic oxidation treatment on the corrosion and stress corrosion cracking behaviour of AM50 magnesium alloy, Mater. Sci. Engin.: A, vol.494, pp.401-406, 2008.

R. H. Khan, A. L. Yerokhin, and A. Matthews, Structural characteristics and residual stresses in oxide films produced on Ti by pulsed unipolar plasma electrolytic oxidation, Philosophical Magazine, vol.88, pp.795-807, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00513872

K. E. Tillous, Contribution à l'étude de l'aluminium et ses alliages 2214-T6 et 7050-T74 transformés par oxydation micro-arcs (OMA), 2006.

E. Matykina, R. Arrabal, P. Skeldon, and G. E. Thompson, Investigation of the growth processes of coatings formed by AC plasma electrolytic oxidation of aluminium, Electrochim. Acta, vol.54, pp.6767-6778, 2009.

J. Lee and S. Kim, Effects of silicate ion concentration on the formation of ceramic oxide layers produced by plasma electrolytic oxidation on Al alloy, Jpn. J. Appl. Phys, vol.56, 2017.

H. Kalkanc? and S. C. Kurnaz, The effect of process parameters on mullite-based plasma electrolytic oxide coatings, Surf. Coat. Technol, vol.203, pp.15-22, 2008.

J. A. Curran and T. W. Clyne, The thermal conductivity of plasma electrolytic oxide coatings on aluminium and magnesium, Surf. Coat. Technol, vol.199, pp.177-183, 2005.

X. Zhang, S. Aliasghari, A. N?mcová, T. L. Burnett, I. Kub?na et al., X-ray Computed Tomographic Investigation of the Porosity and Morphology of Plasma Electrolytic Oxidation Coatings, vol.8, pp.8801-8810, 2016.

X. Yu, L. Chen, H. Qin, M. Wu, and Z. Yan, Formation process of in situ oxide coatings with high porosity using one-step plasma electrolytic oxidation, Appl. Surf. Sci, vol.366, pp.432-438, 2016.

J. A. Curran and T. W. Clyne, Porosity in plasma electrolytic oxide coatings, Acta Materialia, vol.54, pp.1985-1993, 2006.

O. A. Galvis, D. Quintero, J. G. Castaño, H. Liu, G. E. Thompson et al., H2SO4/H3PO4 electrolytes and effects of coating morphology on adhesive bonding, vol.269, pp.238-249, 2015.

Y. Han, S. Hong, and K. W. Xu, Porous nanocrystalline titania films by plasma electrolytic oxidation, Surf. Coat. Technol, vol.154, pp.314-318, 2002.

B. R. Locke, M. Sato, P. Sunka, M. R. Hoffmann, and J. Chang, Electrohydraulic Discharge and Nonthermal Plasma for Water Treatment, Ind. Eng. Chem. Res, vol.45, pp.882-905, 2006.

P. Bruggeman and C. Leys, Non-thermal plasmas in and in contact with liquids, J. Phys. D: Appl. Phys, vol.42, p.53001, 2009.

A. Hamdan, F. Kosior, C. Noel, G. Henrion, J. Audinot et al., Plasmasurface interaction in heptane, J. of Appl. Phys, vol.113, p.213303, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01284948

M. D. Klapkiv, State of an electrolytic plasma in the process of synthesis of oxides based on aluminum, Mater Sci, vol.31, pp.494-499, 1996.

M. D. Klapkiv, Simulation of synthesis of oxide-ceramic coatings in discharge channels of a metal-electrolyte system, Materials Science, vol.35, pp.279-283, 1999.

L. R. Krishna, A. S. Purnima, N. P. Wasekar, and G. Sundararajan, Kinetics and Properties of Micro Arc Oxidation Coatings Deposited on Commercial Al Alloys, Metall and Mat Trans A, vol.38, pp.370-378, 2007.

E. Matykina, R. Arrabal, D. J. Scurr, A. Baron, P. Skeldon et al., Investigation of the mechanism of plasma electrolytic oxidation of aluminium using 18O tracer, Corrosion Science, vol.52, pp.1070-1076, 2010.

R. O. Hussein, X. Nie, and D. O. Northwood, An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing, Electrochim. Acta, vol.112, pp.111-119, 2013.

J. Jovovi?, S. Stojadinovi?, N. M. ?i?ovi?, and N. Konjevi?, Spectroscopic characterization of plasma during electrolytic oxidation (PEO) of aluminium, Surf. Coat. Technol, vol.206, pp.24-28, 2011.

V. Dehnavi, B. L. Luan, D. W. Shoesmith, X. Y. Liu, and S. Rohani, Effect of duty cycle and applied current frequency on plasma electrolytic oxidation (PEO) coating growth behavior, Surf. Coat. Technol, vol.226, pp.100-107, 2013.

Y. Cheng, Z. Xue, Q. Wang, X. Wu, E. Matykina et al., New findings on properties of plasma electrolytic oxidation coatings from study of an Al-Cu-Li alloy, Electrochim. Acta, vol.107, pp.358-378, 2013.

Y. Cheng, M. Mao, J. Cao, and Z. Peng, Plasma electrolytic oxidation of an Al-Cu-Li alloy in alkaline aluminate electrolytes: A competition between growth and dissolution for the initial ultra-thin films, Electrochim. Acta, vol.138, pp.417-429, 2014.

F. Jaspard, Oxydation des alliages d'aluminium aéronautiques par plasma électrolytique: caractérisation optique du procédé et étude des cinétiques de croissance des couches, Thesis, INPL, 2005.

A. Nominé, Micro-décharges en milieu électrolytique aqueux et leur interaction avec les matériaux: le cas du procédé d'oxydation par plasma électrolytique (PEO), Thesis, 2014.

A. Nominé, J. Martin, C. Noël, G. Henrion, T. Belmonte et al., Surface Charge at the Oxide/Electrolyte Interface: Toward Optimization of Electrolyte Composition for Treatment of Aluminum and Magnesium by Plasma Electrolytic Oxidation, Langmuir, vol.32, pp.1405-1409, 2016.

A. Nominé, J. Martin, G. Henrion, and T. Belmonte, Effect of cathodic micro-discharges on oxide growth during plasma electrolytic oxidation (PEO), Surf. Coat. Technol, vol.269, pp.131-137, 2015.

V. Dehnavi, D. W. Shoesmith, B. L. Luan, M. Yari, X. Y. Liu et al., Corrosion properties of plasma electrolytic oxidation coatings on an aluminium alloy -The effect of the PEO process stage, Mater. Chem. Phys, vol.161, pp.49-58, 2015.

A. Ghasemi, V. S. Raja, C. Blawert, W. Dietzel, and K. U. Kainer, The role of anions in the formation and corrosion resistance of the plasma electrolytic oxidation coatings, Surf. Coat. Technol, vol.204, pp.1469-1478, 2010.

A. Polat, M. Makaraci, and M. Usta, Influence of sodium silicate concentration on structural and tribological properties of microarc oxidation coatings on 2017A aluminum alloy substrate, J. of Alloys and Compounds, vol.504, pp.519-526, 2010.

V. Dehnavi, X. Y. Liu, B. L. Luan, D. W. Shoesmith, and S. Rohani, Phase transformation in plasma electrolytic oxidation coatings on 6061 aluminum alloy, vol.251, pp.106-114, 2014.

W. G?barowski and S. Pietrzyk, Growth Characteristics of the Oxide Layer on Aluminium in the Process of Plasma Electrolytic Oxidation, vol.59, 2014.

S. Ikonopisov, Theory of electrical breakdown during formation of barrier anodic films, Electrochim. Acta, vol.22, pp.1077-1082, 1977.

I. D. Belca, L. D. Zekovic, B. Jovanic, G. Ristovski, and L. Ristovski, The theory of galvanoluminescence in the anodic oxide films obtained by aluminum anodization in ammonium tartrate, Electrochim. Acta, vol.45, pp.4059-4063, 2000.

B. Kasalica, I. Bel?a, S. Stojadinovi?, M. Sarvan, M. Peri? et al., Nature of Galvanoluminescence of Oxide Films Formed by Aluminum Anodization in Inorganic Electrolytes, J. Phys. Chem. C, vol.111, pp.12315-12319, 2007.

K. Shimizu and S. Tajima, Theory of electroluminescence of Al/anodic alumina/electrolyte system, Electrochim. Acta, vol.24, pp.309-311, 1979.

S. Stojadinovic, I. Belca, B. Kasalica, . Lj, M. Zekovic et al., The galvanoluminescence spectra of barrier oxide films on aluminum formed in inorganic electrolytes, Electrochem. Commun, vol.8, pp.1621-1624, 2006.

S. Stojadinovic, M. Tadic, I. Belca, B. Kasalica, . Lj et al., The galvanoluminescence spectra of barrier oxide films on aluminum formed in organic electrolytes, Electrochim. Acta, vol.52, pp.7166-7170, 2007.

S. Stojadinovi?, R. Vasili?, B. Kasalica, I. Bel?a, and L. Zekovi?, Luminescence During the Electrochemical Oxidation of Aluminum, pp.241-302, 2014.

S. Tajima, K. Shimizu, N. Baba, and S. Matsuzawa, Nature of luminescence during galvanostatic anodizing of high purity aluminium, Electrochim. Acta, vol.22, pp.845-849, 1977.

, Atomic Spectra Database

P. J. Bruggeman, N. Sadeghi, D. C. Schram, and V. Linss, Gas temperature determination from rotational lines in non-equilibrium plasmas: a review, vol.23, p.23001, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01006011

P. Bruggeman, D. C. Schram, M. G. Kong, and C. Leys, Is the Rotational Temperature of OH(A-X) for Discharges in and in Contact with Liquids a Good Diagnostic for Determining the Gas Temperature?, Plasma Processes and Polymers, vol.6, pp.751-762, 2009.

A. Rodero and M. C. García, Gas temperature determination of non-thermal atmospheric plasmas from the collisional broadening of argon atomic emission lines, Journal of Quantitative Spectroscopy and Radiative Transfer, vol.198, pp.93-103, 2017.

H. Nassar, S. Pellerin, K. Musiol, O. Martinie, N. Pellerin et al., N2+/N2 ratio and temperature measurements based on the first negative N2+ and second positive N2 overlapped molecular emission spectra, J. Phys. D: Appl. Phys, vol.37, pp.1904-1916, 2004.

M. Sarvan, J. Radi?-peri?, B. Kasalica, I. Bel?a, S. Stojadinovi? et al., Investigation of long-duration plasma electrolytic oxidation of aluminum by means of optical spectroscopy, Surf. Coat. Technol, vol.254, pp.270-276, 2014.

A. Descoeudres, Characterization of electrical discharge machining plasmas, 2006.

H. R. Griem, Plasma spectroscopy, 1964.

H. R. Griem, Spectral line broadening by plasmas, 1974.

C. Yubero, M. C. García, and M. D. Calzada, On the use of the H? spectral line to determine the electron density in a microwave (2.45GHz) plasma torch at atmospheric pressure, Spectrochim. Acta Part B: Atomic Spectroscopy, vol.61, pp.540-544, 2006.

T. Shirai, H. Watanabe, M. Fuji, and M. Takahashi, Structural Properties and Surface Characteristics on Aluminum Oxide Powders, vol.9, pp.23-31, 2009.

A. I. Osman, J. K. Abu-dahrieh, D. W. Rooney, S. A. Halawy, M. A. Mohamed et al., Effect of precursor on the performance of alumina for the dehydration of methanol to dimethyl ether, Applied Catalysis B: Environmental, vol.127, pp.307-315, 2012.

D. Tsai and C. Chou, Review of the Soft Sparking Issues in Plasma Electrolytic Oxidation, vol.8, p.105, 2018.

A. Nominé, S. C. Troughton, A. V. Nominé, G. Henrion, and T. W. Clyne, High speed video evidence for localised discharge cascades during plasma electrolytic oxidation, Surf. Coat. Technol, vol.269, pp.125-130, 2015.

D. Wang, X. Liu, Y. Wu, H. Han, Z. Yang et al., Evolution process of the plasma electrolytic oxidation (PEO) coating formed on aluminum in an alkaline sodium hexametaphosphate ((NaPO3)6) electrolyte, J. Alloy Compd, vol.798, pp.129-143, 2019.

M. F. Al-kuhaili, Characterization of copper oxide thin films deposited by the thermal evaporation of cuprous oxide (Cu2O), Vacuum, pp.623-629, 2008.

E. M. Alkoy and P. J. Kelly, The structure and properties of copper oxide and copper aluminium oxide coatings prepared by pulsed magnetron sputtering of powder targets, Vacuum, vol.79, pp.221-230, 2005.

M. Heinemann, B. Eifert, and C. Heiliger, Band structure and phase stability of the copper oxides Cu2O, CuO, and Cu4O3, Phys. Rev. B, vol.87, p.115111, 2013.

J. F. Pierson, A. Thobor-keck, and A. Billard, Cuprite, paramelaconite and tenorite films deposited by reactive magnetron sputtering, Appl. Surf. Sci, vol.210, pp.359-367, 2003.

K. Santra, C. K. Sarkar, M. K. Mukherjee, and B. Ghosh, Copper oxide thin films grown by plasma evaporation method, Thin Solid Films, vol.213, pp.226-229, 1992.

Y. Wang, P. Miska, D. Pilloud, D. Horwat, F. Mücklich et al., Transmittance enhancement and optical band gap widening of Cu2O thin films after air annealing, J. Appl. Phys, vol.115, p.73505, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01284785

R. H. Doremus, Ceramic and glass materials: structure, properties and processing, 2008.

W. K. Yeung, I. V. Sukhorukova, D. V. Shtansky, E. A. Levashov, I. Y. Zhitnyak et al., Characteristics and in vitro response of thin hydroxyapatite-titania films produced by plasma electrolytic oxidation of Ti alloys in electrolytes with particle additions, RSC Adv, vol.6, pp.12688-12698, 2016.

P. Bruggeman, D. Schram, M. Á. González, R. Rego, M. G. Kong et al., Characterization of a direct dc-excited discharge in water by optical emission spectroscopy, Plasma Sources Sci. Technol, vol.18, p.25017, 2009.

P. Bruggeman, T. Verreycken, M. Á. González, J. L. Walsh, M. G. Kong et al., Optical emission spectroscopy as a diagnostic for plasmas in liquids: opportunities and pitfalls, J. Phys. D: Appl. Phys, vol.43, p.124005, 2010.

T. Belmonte, C. Noël, T. Gries, J. Martin, and G. Henrion, Theoretical background of optical emission spectroscopy for analysis of atmospheric pressure plasmas, Plasma Sources Sci. Technol, vol.24, p.64003, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01285980

S. Stojadinovi?, R. Vasili?, and M. Peri?, Investigation of plasma electrolytic oxidation on valve metals by means of molecular spectroscopy -a review, vol.4, p.25759, 2014.

C. S. Dunleavy, J. A. Curran, and T. W. Clyne, Self-similar scaling of discharge events through PEO coatings on aluminium, Surf. Coat. Technol, vol.206, pp.1051-1061, 2011.

S. C. Troughton, A. Nominé, A. V. Nominé, G. Henrion, and T. W. Clyne, Synchronised electrical monitoring and high speed video of bubble growth associated with individual discharges during plasma electrolytic oxidation, Appl. Surf. Sci, vol.359, pp.405-411, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01286245

S. C. Troughton, A. Nominé, J. Dean, and T. W. Clyne, Effect of individual discharge cascades on the microstructure of plasma electrolytic oxidation coatings, Appl. Surf. Sci, vol.389, pp.260-269, 2016.

?. A. Aksey and J. A. Pask, Stable and Metastable Equilibria in the System SiO2-Al2O3, J. Am. Ceram. Soc, vol.58, pp.507-512, 1975.

S. H. Risbud and J. A. Pask, Mullite Crystallization from SiO2-Al2O3 Melts, J. Am. Ceram. Soc, vol.61, pp.63-67, 1978.

W. M. Kriven and J. A. Pask, Solid Solution Range and Microstructures of Melt-Grown Mullite, J. Am. Ceram. Soc, vol.66, pp.649-654, 1983.

T. Takamori and R. Roy, Rapid Crystallization of SiO2-Al2O3 Glasses, Journal of the American Ceram. Society, vol.56, pp.639-644, 1973.

Y. Chiang and W. D. Kingery, Spinodal Decomposition in a K2O-Al2O3-CaO-SiO2 Glass, J. Am. Ceram. Soc, vol.66, pp.171-172, 1983.

R. J. Rossin, G. Bensan, and . Urbain, Viscosité de la silice fondue et de laitiers liquides appartenant au systeme SiO2-Al2O3, CR Acad. Sci. Paris, vol.258, pp.562-564, 1964.

E. Matykina, R. Arrabal, P. Skeldon, and G. E. Thompson, Optimisation of the plasma electrolytic oxidation process efficiency on aluminium, Surf. Interface Anal, vol.42, pp.221-226, 2009.

F. Tjiang, L. Ye, Y. Huang, C. Chou, and D. Tsai, Effect of processing parameters on soft regime behavior of plasma electrolytic oxidation of magnesium, Ceram. Int, vol.43, pp.567-572, 2017.

Y. Cheng, J. Cao, Z. Peng, Q. Wang, E. Matykina et al., Wearresistant coatings formed on Zircaloy-2 by plasma electrolytic oxidation in sodium aluminate electrolytes, Electrochim. Acta, vol.116, pp.453-466, 2014.

Y. Cheng, J. Cao, M. Mao, H. Xie, and P. Skeldon, Key factors determining the development of two morphologies of plasma electrolytic coatings on an Al-Cu-Li alloy in aluminate electrolytes, Surf. Coat. Technol, vol.291, pp.239-249, 2016.

Y. Toriyabe, S. Watanabe, S. Yatsu, T. Shibayama, and T. Mizuno, Controlled formation of metallic nanoballs during plasma electrolysis, Appl. Phys. Lett, vol.91, p.41501, 2007.

T. A. Kareem and A. A. Kaliani, Glow discharge plasma electrolysis for nanoparticles synthesis, Ionics, vol.18, pp.315-327, 2012.

Y. Cheng, E. Matykina, P. Skeldon, and G. Thompson, Characterization of plasma electrolytic oxidation coatings on Zircaloy-4 formed in different electrolytes with AC current regime, Electrochim. Acta, vol.56, pp.8467-8476, 2011.

R. O. Hussein, D. O. Northwood, and X. Nie, Coating growth behavior during the plasma electrolytic oxidation process, J. Vac. Sci. Technol. A, vol.28, pp.766-773, 2010.

R. O. Hussein, D. O. Northwood, and X. Nie, The influence of pulse timing and current mode on the microstructure and corrosion behaviour of a plasma electrolytic oxidation (PEO) coated AM60B magnesium alloy, J. Alloy Compd, vol.541, pp.41-48, 2012.

J. Martin, A. Nominé, V. Ntomprougkidis, S. Migot, S. Bruyère et al., Formation of a metastable nanostructured mullite during Plasma Electrolytic Oxidation of aluminium in "soft" regime condition, Materials & Design, vol.180, p.107977, 2019.
URL : https://hal.archives-ouvertes.fr/hal-02182775

J. Tian, Z. Luo, S. Qi, and X. Sun, Structure and antiwear behavior of micro-arc oxidized coatings on aluminum alloy, Surf. Coat. Technol, vol.154, pp.1-7, 2002.

X. Nie, E. I. Meletis, J. C. Jiang, A. Leyland, A. L. Yerokhin et al., Abrasive wearycorrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis, Surf. Coat. Technol, p.7, 2002.

L. Rama-krishna, K. R. Somaraju, and G. Sundararajan, The tribological performance of ultrahard ceramic composite coatings obtained through microarc oxidation, Surf. Coat. Technol, pp.484-490, 2003.

S. V. Gnedenkov, O. A. Khrisanfova, A. G. Zavidnaya, S. L. Sinebrukhov, P. S. Gordienko et al., Composition and adhesion of protective coatings on aluminum, Surf. Coat. Technol, vol.145, pp.146-151, 2001.

V. Champagne and D. Helfritch, The unique abilities of cold spray deposition, Int. Mater. Rev, vol.61, pp.437-455, 2016.

A. Moridi, S. M. Hassani-gangaraj, M. Guagliano, and M. Dao, Cold spray coating: review of material systems and future perspectives, Surf. Eng, vol.30, pp.369-395, 2014.

M. R. Rokni, S. R. Nutt, C. A. Widener, V. K. Champagne, and R. H. Hrabe, Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray, J. Therm. Spray Tech, vol.26, pp.1308-1355, 2017.

N. Shirai, S. Uchida, and F. Tochikubo, Synthesis of metal nanoparticles by dual plasma electrolysis using atmospheric dc glow discharge in contact with liquid, Jpn. J. Appl. Phys, vol.53, p.46202, 2014.

T. Kaneko, K. Baba, T. Haraba, and R. Hatakeyama, Novel Gas-Liquid Interfacial Plasmas for Synthesis of Metal Nanoparticles, vol.6, pp.713-718, 2009.

V. S. Burakov, E. A. Nevar, M. I. Nedel'ko, and N. V. Tarasenko, Synthesis and modification of molecular nanoparticles in electrical discharge plasma in liquids, Russ. J. Gen. Chem, vol.85, pp.1222-1237, 2015.