Skip to Main content Skip to Navigation
Journal articles

Preparation and Properties of a Novel Type of Tannin-based Wood Adhesive

Abstract : A novel biomass-based wood adhesive was prepared with commercial Mimosa tannin extract and glycerol diglycidyl ether (GDE) by convenient mechanical mixing. GDE served as the crosslinker of the tannin without any aldehyde addition yielding hardened three-dimensional networks. Different weight ratios of tannin/GDE were investigated by a number of techniques to determine their influence on final properties. The results showed that a non-hydrolysable ester bonds can be formed between the epoxy groups of GDE and hydroxyl groups of tannin, this being the critical factor for the good water resistance obtained by the wood adhesives prepared. Moreover, the dry and wet shear strength exhibit positive correlation with the proportion of GDE added. Even at a relatively small proportion of GDE (33% of the weight of dry tannin), the dry and 24 h cold water shear strengths of the bonded plywood satisfied the requirements of relevant standard (GB/T 9846-2015, ≥0.7 MPa). The thermal stability of the tannin-based wood adhesive so prepared progressively improved with the increasing proportion of GDE.
Document type :
Journal articles
Complete list of metadata

https://hal.univ-lorraine.fr/hal-03158407
Contributor : Antonio Pizzi <>
Submitted on : Wednesday, March 3, 2021 - 6:41:47 PM
Last modification on : Friday, April 30, 2021 - 5:14:03 PM

Identifiers

Collections

Citation

Xinyi Chen, Antonio Pizzi, Emmanuel Fredon, Christine Gerardin, Jinxing Li, et al.. Preparation and Properties of a Novel Type of Tannin-based Wood Adhesive. Journal of Adhesion, Taylor & Francis, 2020, ⟨10.1080/00218464.2020.1863215⟩. ⟨hal-03158407⟩

Share

Metrics

Record views

53

Files downloads

28