Nonlinear observation and control of a lightweight robotic manipulator actuated by shape memory alloy (SMA) wires - Université de Lorraine Accéder directement au contenu
Thèse Année : 2019

Nonlinear observation and control of a lightweight robotic manipulator actuated by shape memory alloy (SMA) wires

Observation et commande non linéaire d'un manipulateur robotique léger actionné par des fils en alliage à mémoire de forme (SMA)

Résumé

In the last decade, the industry of Unmanned Aerial Vehicles (UAV) has gone through immense growth and diversification. Nowadays, we find drone based applications in a wide range of industries, such as infrastructure, agriculture, transport, among others. This phenomenon has generated an increasing interest in the field of aerial manipulation. The implementation of aerial manipulators in the UAV industry could generate a significant increase in possible applications. However, the restriction on available payload is one of the main setbacks of this approach. The impossibility to equip UAVs with heavy dexterous industrial robotic arms has driven the interest in the development of lightweight manipulators suitable for these applications. In the pursuit of providing an alternative lightweight solution for the aerial manipulators, this thesis proposes a lightweight robotic arm actuated by Shape Memory Alloy (SMA) wires. Although SMA wires represent a great alternative to conventional actuators for lightweight applications, they also imply highly nonlinear dynamics, which makes them difficult to control. Seeking to present a solution for the challenging task of controlling SMA wires, this work investigates the implications and advantages of the implementation of state feedback control techniques. The final aim of this study is the experimental implementation of a state feedback control for position regulation of the proposed lightweight robotic arm. Firstly, a mathematical model based on a constitutive model of the SMA wire is developed and experimentally validated. This model describes the dynamics of the proposed lightweight robotic arm from a mechatronics perspective. The proposed robotic arm is tested with three output feedback controllers for angular position control, namely a PID, a Sliding Mode and an Adaptive Controller. The controllers are tested in a MATLAB simulation and finally implemented and experimentally tested in various different scenarios. Following, in order to perform the experimental implementation of a state feedback control technique, a state and unknown input observer is developed. First, a non-switching observable model with unknown input of the proposed robotic arm is derived from the model previously presented. This model takes the martensite fraction rate of the original model as an unknown input, making it possible to eliminate the switching terms in the model. Then, a state and unknown input observer is proposed. This observer is based on the Extended Kalman Filter (EKF) for state estimation and sliding mode approach for unknown input estimation. Sufficient conditions for stability and convergence are established. The observer is tested in a MATLAB simulation and experimentally validated in various different scenarios. Finally, a state feedback control technique is tested in simulation and experimentally implemented for angular position control of the proposed lightweight robotic arm. Specifically, continuous and discrete-time State-Dependent Riccati Equation (SDRE) control laws are derived and implemented. To conclude, a quantitative and qualitative comparative analysis between an output feedback control approach and the implemented state feedback control is carried out under multiple scenarios, including position regulation, position tracking and tracking with changing payloads.
Au cours de la dernière décennie, l’industrie des véhicules aériens sans pilote (UAV) a connu une croissance et une diversification immenses. De nos jours, nous trouvons des applications basées sur les drones dans un large éventail d’industries, telles que les infrastructures, l’agriculture, les transports, etc. Ce phénomène a suscité un intérêt croissant dans le domaine de la manipulation aérienne. La mise en œuvre de manipulateurs aériens dans l'industrie des UAV pourrait générer une augmentation significative du nombre d'applications possibles. Cependant, la restriction de la charge utile disponible est l’un des principaux inconvénients de cette approche. L'impossibilité d'équiper les drones de bras robotiques industriels puissants et habiles a suscité l'intérêt pour le développement de manipulateurs légers adaptés à ces applications. Dans le but de fournir une solution légère alternative aux manipulateurs aériens, cette thèse propose un bras robotique léger actionné par des fils en alliage à mémoire de forme (SMA). Bien que les fils SMA représentent une excellente alternative aux actionneurs conventionnels pour les applications légères, ils impliquent également une dynamique hautement non linéaire, ce qui les rend difficiles à contrôler. Cherchant à présenter une solution pour la tâche difficile de contrôler les fils SMA, ce travail étudie les conséquences et les avantages de la mise en œuvre des techniques de commande par retour d’état. L'objectif final de cette étude est la mise en œuvre expérimentale d'un contrôle à rétroaction d'état pour la régulation de la position du bras robotique léger proposé. Tout d'abord, un modèle mathématique basé sur un modèle physique du comportement des câbles SMA est développé et validé expérimentalement. Ce modèle décrit la dynamique du bras robotique léger proposé du point de vue de la mécatronique. Le bras robotique proposé est testé avec trois contrôleurs de retour de sortie pour le contrôle de position angulaire, à savoir un PID, un mode coulissant et une commande adaptative. Les contrôleurs sont testés dans une simulation MATLAB, puis mis en œuvre et testés expérimentalement selon différents scénarios. Ensuite, afin de réaliser la mise en œuvre expérimentale d’une technique de commande par retour d’état, un observateur d’état, à entrée inconnue, est développé. Premièrement, un modèle observable sans commutation avec une entrée inconnue est dérivé du modèle présenté précédemment. Ce modèle prend comme entrée inconnue le taux de fraction de martensite du modèle d'origine, ce qui permet d'éliminer les termes de commutation dans le modèle. Ensuite, un observateur, à entrées inconnues, basé sur le filtre de Kalman étendu et sur l’observateur à mode glissant est développé. Cet observateur permet l’estimation simultanée de l’état et des entrées inconnues. Les conditions suffisantes de convergence et de stabilité sont établies. L'observateur est testé dans une simulation MATLAB et validé expérimentalement dans différents scénarios. Enfin, une technique de commande par retour d’état est testée en simulation et implémentée de manière expérimentale pour le contrôle de position angulaire du bras robotique léger proposé. Elle est basée sur la résolution d’une équation de Riccati (SDRE). En conclusion, une analyse comparative quantitative et qualitative entre une approche de commande par retour de sortie et la une de commande par retour d’état mis en œuvre est effectuée selon plusieurs scénarios, y compris la régulation de position, le suivi de position et le suivi de charges utiles changeantes.
Fichier principal
Vignette du fichier
DDOC_T_2019_0050_QUINTANAR_GUZMAN.pdf (12.17 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

tel-02332370 , version 1 (17-01-2020)

Identifiants

  • HAL Id : tel-02332370 , version 1

Citer

Serket Quintanar-Guzman. Nonlinear observation and control of a lightweight robotic manipulator actuated by shape memory alloy (SMA) wires. Automatic. Université de Lorraine; Université du Luxembourg, 2019. English. ⟨NNT : 2019LORR0050⟩. ⟨tel-02332370⟩
132 Consultations
167 Téléchargements

Partager

Gmail Facebook X LinkedIn More